commit 93f7a6d818 upstream.
Currently kdb uses in_interrupt() to determine whether its library
code has been called from the kgdb trap handler or from a saner calling
context such as driver init. This approach is broken because
in_interrupt() alone isn't able to determine kgdb trap handler entry from
normal task context. This can happen during normal use of basic features
such as breakpoints and can also be trivially reproduced using:
echo g > /proc/sysrq-trigger
We can improve this by adding check for in_dbg_master() instead which
explicitly determines if we are running in debugger context.
Cc: stable@vger.kernel.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/1611313556-4004-1-git-send-email-sumit.garg@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b18b099e04 ]
On my system the kernel processes the "kgdb_earlycon" parameter before
the "kgdbcon" parameter. When we setup "kgdb_earlycon" we'll end up
in kgdb_register_callbacks() and "kgdb_use_con" won't have been set
yet so we'll never get around to starting "kgdbcon". Let's remedy
this by detecting that the IO module was already registered when
setting "kgdb_use_con" and registering the console then.
As part of this, to avoid pre-declaring things, move the handling of
the "kgdbcon" further down in the file.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200630151422.1.I4aa062751ff5e281f5116655c976dff545c09a46@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d081a6e353 ]
Currently using forward search doesn't handle multi-line strings correctly.
The search routine replaces line breaks with \0 during the search and, for
regular searches ("help | grep Common\n"), there is code after the line
has been discarded or printed to replace the break character.
However during a pager search ("help\n" followed by "/Common\n") when the
string is matched we will immediately return to normal output and the code
that should restore the \n becomes unreachable. Fix this by restoring the
replaced character when we disable the search mode and update the comment
accordingly.
Fixes: fb6daa7520 ("kdb: Provide forward search at more prompt")
Link: https://lore.kernel.org/r/20200909141708.338273-1-daniel.thompson@linaro.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 440ab9e10e ]
At times when I'm using kgdb I see a splat on my console about
suspicious RCU usage. I managed to come up with a case that could
reproduce this that looked like this:
WARNING: suspicious RCU usage
5.7.0-rc4+ #609 Not tainted
-----------------------------
kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by swapper/0/1:
#0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c
#1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac
#2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac
stack backtrace:
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ #609
Hardware name: Google Cheza (rev3+) (DT)
Call trace:
dump_backtrace+0x0/0x1b8
show_stack+0x1c/0x24
dump_stack+0xd4/0x134
lockdep_rcu_suspicious+0xf0/0x100
find_task_by_pid_ns+0x5c/0x80
getthread+0x8c/0xb0
gdb_serial_stub+0x9d4/0xd04
kgdb_cpu_enter+0x284/0x7ac
kgdb_handle_exception+0x174/0x20c
kgdb_brk_fn+0x24/0x30
call_break_hook+0x6c/0x7c
brk_handler+0x20/0x5c
do_debug_exception+0x1c8/0x22c
el1_sync_handler+0x3c/0xe4
el1_sync+0x7c/0x100
rpmh_rsc_probe+0x38/0x420
platform_drv_probe+0x94/0xb4
really_probe+0x134/0x300
driver_probe_device+0x68/0x100
__device_attach_driver+0x90/0xa8
bus_for_each_drv+0x84/0xcc
__device_attach+0xb4/0x13c
device_initial_probe+0x18/0x20
bus_probe_device+0x38/0x98
device_add+0x38c/0x420
If I understand properly we should just be able to blanket kgdb under
one big RCU read lock and the problem should go away. We'll add it to
the beast-of-a-function known as kgdb_cpu_enter().
With this I no longer get any splats and things seem to work fine.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200602154729.v2.1.I70e0d4fd46d5ed2aaf0c98a355e8e1b7a5bb7e4e@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b586627e10 ]
The "whichcpu" comes from argv[3]. The cpu_online() macro looks up the
cpu in a bitmap of online cpus, but if the value is too high then it
could read beyond the end of the bitmap and possibly Oops.
Fixes: 5d5314d679 ("kdb: core for kgdb back end (1 of 2)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2cf2f0d5b9 upstream.
gcc discovered that the memcpy() arguments in kdbnearsym() overlap, so
we should really use memmove(), which is defined to handle that correctly:
In function 'memcpy',
inlined from 'kdbnearsym' at /git/arm-soc/kernel/debug/kdb/kdb_support.c:132:4:
/git/arm-soc/include/linux/string.h:353:9: error: '__builtin_memcpy' accessing 792 bytes at offsets 0 and 8 overlaps 784 bytes at offset 8 [-Werror=restrict]
return __builtin_memcpy(p, q, size);
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c2b94c72d9 ]
gcc 8.1.0 warns with:
kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’:
kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
strncpy(prefix_name, name, strlen(name)+1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/debug/kdb/kdb_support.c:239:31: note: length computed here
Use strscpy() with the destination buffer size, and use ellipses when
displaying truncated symbols.
v2: Use strscpy()
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Jonathan Toppins <jtoppins@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Changes in 4.9.104
MIPS: c-r4k: Fix data corruption related to cache coherence
MIPS: ptrace: Expose FIR register through FP regset
MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs
KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable"
affs_lookup(): close a race with affs_remove_link()
aio: fix io_destroy(2) vs. lookup_ioctx() race
ALSA: timer: Fix pause event notification
do d_instantiate/unlock_new_inode combinations safely
mmc: sdhci-iproc: remove hard coded mmc cap 1.8v
mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register
libata: Blacklist some Sandisk SSDs for NCQ
libata: blacklist Micron 500IT SSD with MU01 firmware
xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent
drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macros
IB/hfi1: Use after free race condition in send context error path
Revert "ipc/shm: Fix shmat mmap nil-page protection"
ipc/shm: fix shmat() nil address after round-down when remapping
kasan: fix memory hotplug during boot
kernel/sys.c: fix potential Spectre v1 issue
kernel/signal.c: avoid undefined behaviour in kill_something_info
KVM/VMX: Expose SSBD properly to guests
KVM: s390: vsie: fix < 8k check for the itdba
KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed
kvm: x86: IA32_ARCH_CAPABILITIES is always supported
firewire-ohci: work around oversized DMA reads on JMicron controllers
x86/tsc: Allow TSC calibration without PIT
NFSv4: always set NFS_LOCK_LOST when a lock is lost.
ALSA: hda - Use IS_REACHABLE() for dependency on input
kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl
netfilter: ipv6: nf_defrag: Pass on packets to stack per RFC2460
tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account
PCI: Add function 1 DMA alias quirk for Marvell 9128
Input: psmouse - fix Synaptics detection when protocol is disabled
i40iw: Zero-out consumer key on allocate stag for FMR
tools lib traceevent: Simplify pointer print logic and fix %pF
perf callchain: Fix attr.sample_max_stack setting
tools lib traceevent: Fix get_field_str() for dynamic strings
perf record: Fix failed memory allocation for get_cpuid_str
iommu/vt-d: Use domain instead of cache fetching
dm thin: fix documentation relative to low water mark threshold
net: stmmac: dwmac-meson8b: fix setting the RGMII TX clock on Meson8b
net: stmmac: dwmac-meson8b: propagate rate changes to the parent clock
nfs: Do not convert nfs_idmap_cache_timeout to jiffies
watchdog: sp5100_tco: Fix watchdog disable bit
kconfig: Don't leak main menus during parsing
kconfig: Fix automatic menu creation mem leak
kconfig: Fix expr_free() E_NOT leak
mac80211_hwsim: fix possible memory leak in hwsim_new_radio_nl()
ipmi/powernv: Fix error return code in ipmi_powernv_probe()
Btrfs: set plug for fsync
btrfs: Fix out of bounds access in btrfs_search_slot
Btrfs: fix scrub to repair raid6 corruption
btrfs: fail mount when sb flag is not in BTRFS_SUPER_FLAG_SUPP
HID: roccat: prevent an out of bounds read in kovaplus_profile_activated()
fm10k: fix "failed to kill vid" message for VF
device property: Define type of PROPERTY_ENRTY_*() macros
jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes
powerpc/numa: Ensure nodes initialized for hotplug
RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure
ntb_transport: Fix bug with max_mw_size parameter
gianfar: prevent integer wrapping in the rx handler
tcp_nv: fix potential integer overflow in tcpnv_acked
kvm: Map PFN-type memory regions as writable (if possible)
ocfs2: return -EROFS to mount.ocfs2 if inode block is invalid
ocfs2/acl: use 'ip_xattr_sem' to protect getting extended attribute
ocfs2: return error when we attempt to access a dirty bh in jbd2
mm/mempolicy: fix the check of nodemask from user
mm/mempolicy: add nodes_empty check in SYSC_migrate_pages
asm-generic: provide generic_pmdp_establish()
sparc64: update pmdp_invalidate() to return old pmd value
mm: thp: use down_read_trylock() in khugepaged to avoid long block
mm: pin address_space before dereferencing it while isolating an LRU page
mm/fadvise: discard partial page if endbyte is also EOF
openvswitch: Remove padding from packet before L3+ conntrack processing
IB/ipoib: Fix for potential no-carrier state
drm/nouveau/pmu/fuc: don't use movw directly anymore
netfilter: ipv6: nf_defrag: Kill frag queue on RFC2460 failure
x86/power: Fix swsusp_arch_resume prototype
firmware: dmi_scan: Fix handling of empty DMI strings
ACPI: processor_perflib: Do not send _PPC change notification if not ready
ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y
MIPS: generic: Fix machine compatible matching
MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS
xen-netfront: Fix race between device setup and open
xen/grant-table: Use put_page instead of free_page
RDS: IB: Fix null pointer issue
arm64: spinlock: Fix theoretical trylock() A-B-A with LSE atomics
proc: fix /proc/*/map_files lookup
cifs: silence compiler warnings showing up with gcc-8.0.0
bcache: properly set task state in bch_writeback_thread()
bcache: fix for allocator and register thread race
bcache: fix for data collapse after re-attaching an attached device
bcache: return attach error when no cache set exist
tools/libbpf: handle issues with bpf ELF objects containing .eh_frames
bpf: fix rlimit in reuseport net selftest
vfs/proc/kcore, x86/mm/kcore: Fix SMAP fault when dumping vsyscall user page
locking/qspinlock: Ensure node->count is updated before initialising node
irqchip/gic-v3: Ignore disabled ITS nodes
cpumask: Make for_each_cpu_wrap() available on UP as well
irqchip/gic-v3: Change pr_debug message to pr_devel
ARC: Fix malformed ARC_EMUL_UNALIGNED default
ptr_ring: prevent integer overflow when calculating size
libata: Fix compile warning with ATA_DEBUG enabled
selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m
selftests: memfd: add config fragment for fuse
ARM: OMAP2+: timer: fix a kmemleak caused in omap_get_timer_dt
ARM: OMAP3: Fix prm wake interrupt for resume
ARM: OMAP1: clock: Fix debugfs_create_*() usage
ibmvnic: Free RX socket buffer in case of adapter error
iwlwifi: mvm: fix security bug in PN checking
iwlwifi: mvm: always init rs with 20mhz bandwidth rates
NFC: llcp: Limit size of SDP URI
rxrpc: Work around usercopy check
mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
mac80211: fix a possible leak of station stats
mac80211: fix calling sleeping function in atomic context
mac80211: Do not disconnect on invalid operating class
md raid10: fix NULL deference in handle_write_completed()
drm/exynos: g2d: use monotonic timestamps
drm/exynos: fix comparison to bitshift when dealing with a mask
locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()
md: raid5: avoid string overflow warning
kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE
powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access
s390/cio: fix ccw_device_start_timeout API
s390/cio: fix return code after missing interrupt
s390/cio: clear timer when terminating driver I/O
PKCS#7: fix direct verification of SignerInfo signature
ARM: OMAP: Fix dmtimer init for omap1
smsc75xx: fix smsc75xx_set_features()
regulatory: add NUL to request alpha2
integrity/security: fix digsig.c build error with header file
locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs
x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations
mac80211: drop frames with unexpected DS bits from fast-rx to slow path
arm64: fix unwind_frame() for filtered out fn for function graph tracing
macvlan: fix use-after-free in macvlan_common_newlink()
kvm: fix warning for CONFIG_HAVE_KVM_EVENTFD builds
fs: dcache: Avoid livelock between d_alloc_parallel and __d_add
fs: dcache: Use READ_ONCE when accessing i_dir_seq
md: fix a potential deadlock of raid5/raid10 reshape
md/raid1: fix NULL pointer dereference
batman-adv: fix packet checksum in receive path
batman-adv: invalidate checksum on fragment reassembly
netfilter: ebtables: convert BUG_ONs to WARN_ONs
batman-adv: Ignore invalid batadv_iv_gw during netlink send
batman-adv: Ignore invalid batadv_v_gw during netlink send
batman-adv: Fix netlink dumping of BLA claims
batman-adv: Fix netlink dumping of BLA backbones
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
clocksource/drivers/fsl_ftm_timer: Fix error return checking
ceph: fix dentry leak when failing to init debugfs
ARM: orion5x: Revert commit 4904dbda41.
qrtr: add MODULE_ALIAS macro to smd
r8152: fix tx packets accounting
virtio-gpu: fix ioctl and expose the fixed status to userspace.
dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3
bcache: fix kcrashes with fio in RAID5 backend dev
ip6_tunnel: fix IFLA_MTU ignored on NEWLINK
sit: fix IFLA_MTU ignored on NEWLINK
ARM: dts: NSP: Fix amount of RAM on BCM958625HR
powerpc/boot: Fix random libfdt related build errors
gianfar: Fix Rx byte accounting for ndev stats
net/tcp/illinois: replace broken algorithm reference link
nvmet: fix PSDT field check in command format
xen/pirq: fix error path cleanup when binding MSIs
drm/sun4i: Fix dclk_set_phase
Btrfs: send, fix issuing write op when processing hole in no data mode
selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable
KVM: PPC: Book3S HV: Fix VRMA initialization with 2MB or 1GB memory backing
iwlwifi: mvm: fix TX of CCMP 256
watchdog: f71808e_wdt: Fix magic close handling
watchdog: sbsa: use 32-bit read for WCV
batman-adv: Fix multicast packet loss with a single WANT_ALL_IPV4/6 flag
e1000e: Fix check_for_link return value with autoneg off
e1000e: allocate ring descriptors with dma_zalloc_coherent
ia64/err-inject: Use get_user_pages_fast()
RDMA/qedr: Fix kernel panic when running fio over NFSoRDMA
RDMA/qedr: Fix iWARP write and send with immediate
IB/mlx4: Fix corruption of RoCEv2 IPv4 GIDs
IB/mlx4: Include GID type when deleting GIDs from HW table under RoCE
IB/mlx5: Fix an error code in __mlx5_ib_modify_qp()
fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper().
fsl/fman: avoid sleeping in atomic context while adding an address
net: qcom/emac: Use proper free methods during TX
net: smsc911x: Fix unload crash when link is up
IB/core: Fix possible crash to access NULL netdev
xen: xenbus: use put_device() instead of kfree()
arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discovery
dmaengine: mv_xor_v2: Fix clock resource by adding a register clock
netfilter: ebtables: fix erroneous reject of last rule
bnxt_en: Check valid VNIC ID in bnxt_hwrm_vnic_set_tpa().
workqueue: use put_device() instead of kfree()
ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu
sunvnet: does not support GSO for sctp
drm/imx: move arming of the vblank event to atomic_flush
net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off
batman-adv: fix header size check in batadv_dbg_arp()
batman-adv: Fix skbuff rcsum on packet reroute
vti4: Don't count header length twice on tunnel setup
vti4: Don't override MTU passed on link creation via IFLA_MTU
perf/cgroup: Fix child event counting bug
brcmfmac: Fix check for ISO3166 code
kbuild: make scripts/adjust_autoksyms.sh robust against timestamp races
RDMA/ucma: Correct option size check using optlen
RDMA/qedr: fix QP's ack timeout configuration
RDMA/qedr: Fix rc initialization on CNQ allocation failure
mm/mempolicy.c: avoid use uninitialized preferred_node
mm, thp: do not cause memcg oom for thp
selftests: ftrace: Add probe event argument syntax testcase
selftests: ftrace: Add a testcase for string type with kprobe_event
selftests: ftrace: Add a testcase for probepoint
batman-adv: fix multicast-via-unicast transmission with AP isolation
batman-adv: fix packet loss for broadcasted DHCP packets to a server
ARM: 8748/1: mm: Define vdso_start, vdso_end as array
net: qmi_wwan: add BroadMobi BM806U 2020:2033
perf/x86/intel: Fix linear IP of PEBS real_ip on Haswell and later CPUs
llc: properly handle dev_queue_xmit() return value
builddeb: Fix header package regarding dtc source links
mm/kmemleak.c: wait for scan completion before disabling free
net: Fix untag for vlan packets without ethernet header
net: mvneta: fix enable of all initialized RXQs
sh: fix debug trap failure to process signals before return to user
nvme: don't send keep-alives to the discovery controller
x86/pgtable: Don't set huge PUD/PMD on non-leaf entries
x86/mm: Do not forbid _PAGE_RW before init for __ro_after_init
fs/proc/proc_sysctl.c: fix potential page fault while unregistering sysctl table
swap: divide-by-zero when zero length swap file on ssd
sr: get/drop reference to device in revalidate and check_events
Force log to disk before reading the AGF during a fstrim
cpufreq: CPPC: Initialize shared perf capabilities of CPUs
dp83640: Ensure against premature access to PHY registers after reset
mm/ksm: fix interaction with THP
mm: fix races between address_space dereference and free in page_evicatable
Btrfs: bail out on error during replay_dir_deletes
Btrfs: fix NULL pointer dereference in log_dir_items
btrfs: Fix possible softlock on single core machines
ocfs2/dlm: don't handle migrate lockres if already in shutdown
sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning
KVM: VMX: raise internal error for exception during invalid protected mode state
fscache: Fix hanging wait on page discarded by writeback
sparc64: Make atomic_xchg() an inline function rather than a macro.
net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
btrfs: tests/qgroup: Fix wrong tree backref level
Btrfs: fix copy_items() return value when logging an inode
btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers
rxrpc: Fix Tx ring annotation after initial Tx failure
rxrpc: Don't treat call aborts as conn aborts
xen/acpi: off by one in read_acpi_id()
drivers: macintosh: rack-meter: really fix bogus memsets
ACPI: acpi_pad: Fix memory leak in power saving threads
powerpc/mpic: Check if cpu_possible() in mpic_physmask()
m68k: set dma and coherent masks for platform FEC ethernets
parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode
hwmon: (nct6775) Fix writing pwmX_mode
powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer
powerpc/perf: Fix kernel address leak via sampling registers
tools/thermal: tmon: fix for segfault
selftests: Print the test we're running to /dev/kmsg
net/mlx5: Protect from command bit overflow
ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)
cxgb4: Setup FW queues before registering netdev
ima: Fallback to the builtin hash algorithm
virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS
arm: dts: socfpga: fix GIC PPI warning
cpufreq: cppc_cpufreq: Fix cppc_cpufreq_init() failure path
zorro: Set up z->dev.dma_mask for the DMA API
bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set
ACPICA: Events: add a return on failure from acpi_hw_register_read
ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c
cxgb4: Fix queue free path of ULD drivers
i2c: mv64xxx: Apply errata delay only in standard mode
KVM: lapic: stop advertising DIRECTED_EOI when in-kernel IOAPIC is in use
perf top: Fix top.call-graph config option reading
perf stat: Fix core dump when flag T is used
IB/core: Honor port_num while resolving GID for IB link layer
regulator: gpio: Fix some error handling paths in 'gpio_regulator_probe()'
spi: bcm-qspi: fIX some error handling paths
MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset
PCI: Restore config space on runtime resume despite being unbound
ipmi_ssif: Fix kernel panic at msg_done_handler
powerpc: Add missing prototype for arch_irq_work_raise()
f2fs: fix to check extent cache in f2fs_drop_extent_tree
perf/core: Fix perf_output_read_group()
drm/panel: simple: Fix the bus format for the Ontat panel
hwmon: (pmbus/max8688) Accept negative page register values
hwmon: (pmbus/adm1275) Accept negative page register values
perf/x86/intel: Properly save/restore the PMU state in the NMI handler
cdrom: do not call check_disk_change() inside cdrom_open()
perf/x86/intel: Fix large period handling on Broadwell CPUs
perf/x86/intel: Fix event update for auto-reload
arm64: dts: qcom: Fix SPI5 config on MSM8996
soc: qcom: wcnss_ctrl: Fix increment in NV upload
gfs2: Fix fallocate chunk size
x86/devicetree: Initialize device tree before using it
x86/devicetree: Fix device IRQ settings in DT
ALSA: vmaster: Propagate slave error
dmaengine: pl330: fix a race condition in case of threaded irqs
dmaengine: rcar-dmac: Check the done lists in rcar_dmac_chan_get_residue()
enic: enable rq before updating rq descriptors
hwrng: stm32 - add reset during probe
dmaengine: qcom: bam_dma: get num-channels and num-ees from dt
net: stmmac: ensure that the device has released ownership before reading data
net: stmmac: ensure that the MSS desc is the last desc to set the own bit
cpufreq: Reorder cpufreq_online() error code path
PCI: Add function 1 DMA alias quirk for Marvell 88SE9220
udf: Provide saner default for invalid uid / gid
ARM: dts: bcm283x: Fix probing of bcm2835-i2s
audit: return on memory error to avoid null pointer dereference
rcu: Call touch_nmi_watchdog() while printing stall warnings
pinctrl: sh-pfc: r8a7796: Fix MOD_SEL register pin assignment for SSI pins group
MIPS: Octeon: Fix logging messages with spurious periods after newlines
drm/rockchip: Respect page offset for PRIME mmap calls
x86/apic: Set up through-local-APIC mode on the boot CPU if 'noapic' specified
perf tests: Use arch__compare_symbol_names to compare symbols
perf report: Fix memory corruption in --branch-history mode --branch-history
selftests/net: fixes psock_fanout eBPF test case
netlabel: If PF_INET6, check sk_buff ip header version
regmap: Correct comparison in regmap_cached
ARM: dts: imx7d: cl-som-imx7: fix pinctrl_enet
ARM: dts: porter: Fix HDMI output routing
regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'
pinctrl: msm: Use dynamic GPIO numbering
kdb: make "mdr" command repeat
Linux 4.9.104
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Changes in 4.9.69
usb: gadget: udc: renesas_usb3: fix number of the pipes
can: ti_hecc: Fix napi poll return value for repoll
can: kvaser_usb: free buf in error paths
can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback()
can: kvaser_usb: ratelimit errors if incomplete messages are received
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
can: ems_usb: cancel urb on -EPIPE and -EPROTO
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
virtio: release virtio index when fail to device_register
hv: kvp: Avoid reading past allocated blocks from KVP file
isa: Prevent NULL dereference in isa_bus driver callbacks
scsi: dma-mapping: always provide dma_get_cache_alignment
scsi: use dma_get_cache_alignment() as minimum DMA alignment
scsi: libsas: align sata_device's rps_resp on a cacheline
efi: Move some sysfs files to be read-only by root
efi/esrt: Use memunmap() instead of kfree() to free the remapping
ASN.1: fix out-of-bounds read when parsing indefinite length item
ASN.1: check for error from ASN1_OP_END__ACT actions
KEYS: add missing permission check for request_key() destination
X.509: reject invalid BIT STRING for subjectPublicKey
X.509: fix comparisons of ->pkey_algo
x86/PCI: Make broadcom_postcore_init() check acpi_disabled
KVM: x86: fix APIC page invalidation
btrfs: fix missing error return in btrfs_drop_snapshot
ALSA: pcm: prevent UAF in snd_pcm_info
ALSA: seq: Remove spurious WARN_ON() at timer check
ALSA: usb-audio: Fix out-of-bound error
ALSA: usb-audio: Add check return value for usb_string()
iommu/vt-d: Fix scatterlist offset handling
smp/hotplug: Move step CPUHP_AP_SMPCFD_DYING to the correct place
s390: fix compat system call table
KVM: s390: Fix skey emulation permission check
powerpc/64s: Initialize ISAv3 MMU registers before setting partition table
brcmfmac: change driver unbind order of the sdio function devices
kdb: Fix handling of kallsyms_symbol_next() return value
drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
media: dvb: i2c transfers over usb cannot be done from stack
arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one
arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one
KVM: VMX: remove I/O port 0x80 bypass on Intel hosts
KVM: arm/arm64: Fix broken GICH_ELRSR big endian conversion
KVM: arm/arm64: vgic-irqfd: Fix MSI entry allocation
KVM: arm/arm64: vgic-its: Check result of allocation before use
arm64: fpsimd: Prevent registers leaking from dead tasks
bus: arm-cci: Fix use of smp_processor_id() in preemptible context
bus: arm-ccn: Check memory allocation failure
bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.
crypto: talitos - fix AEAD test failures
crypto: talitos - fix memory corruption on SEC2
crypto: talitos - fix setkey to check key weakness
crypto: talitos - fix AEAD for sha224 on non sha224 capable chips
crypto: talitos - fix use of sg_link_tbl_len
crypto: talitos - fix ctr-aes-talitos
usb: f_fs: Force Reserved1=1 in OS_DESC_EXT_COMPAT
ARM: BUG if jumping to usermode address in kernel mode
ARM: avoid faulting on qemu
thp: reduce indentation level in change_huge_pmd()
thp: fix MADV_DONTNEED vs. numa balancing race
mm: drop unused pmdp_huge_get_and_clear_notify()
Revert "drm/armada: Fix compile fail"
Revert "spi: SPI_FSL_DSPI should depend on HAS_DMA"
ARM: 8657/1: uaccess: consistently check object sizes
vti6: Don't report path MTU below IPV6_MIN_MTU.
ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure
x86/selftests: Add clobbers for int80 on x86_64
x86/platform/uv/BAU: Fix HUB errors by remove initial write to sw-ack register
sched/fair: Make select_idle_cpu() more aggressive
x86/hpet: Prevent might sleep splat on resume
powerpc/64: Invalidate process table caching after setting process table
selftest/powerpc: Fix false failures for skipped tests
powerpc: Fix compiling a BE kernel with a powerpc64le toolchain
lirc: fix dead lock between open and wakeup_filter
module: set __jump_table alignment to 8
powerpc/64: Fix checksum folding in csum_add()
ARM: OMAP2+: Fix device node reference counts
ARM: OMAP2+: Release device node after it is no longer needed.
ASoC: rcar: avoid SSI_MODEx settings for SSI8
gpio: altera: Use handle_level_irq when configured as a level_high
HID: chicony: Add support for another ASUS Zen AiO keyboard
usb: gadget: configs: plug memory leak
USB: gadgetfs: Fix a potential memory leak in 'dev_config()'
usb: dwc3: gadget: Fix system suspend/resume on TI platforms
usb: gadget: pxa27x: Test for a valid argument pointer
usb: gadget: udc: net2280: Fix tmp reusage in net2280 driver
kvm: nVMX: VMCLEAR should not cause the vCPU to shut down
libata: drop WARN from protocol error in ata_sff_qc_issue()
workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq
scsi: qla2xxx: Fix ql_dump_buffer
scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters
irqchip/crossbar: Fix incorrect type of register size
KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset
arm: KVM: Survive unknown traps from guests
arm64: KVM: Survive unknown traps from guests
KVM: arm/arm64: VGIC: Fix command handling while ITS being disabled
spi_ks8995: fix "BUG: key accdaa28 not in .data!"
spi_ks8995: regs_size incorrect for some devices
bnx2x: prevent crash when accessing PTP with interface down
bnx2x: fix possible overrun of VFPF multicast addresses array
bnx2x: fix detection of VLAN filtering feature for VF
bnx2x: do not rollback VF MAC/VLAN filters we did not configure
rds: tcp: Sequence teardown of listen and acceptor sockets to avoid races
ibmvnic: Fix overflowing firmware/hardware TX queue
ibmvnic: Allocate number of rx/tx buffers agreed on by firmware
ipv6: reorder icmpv6_init() and ip6_mr_init()
crypto: s5p-sss - Fix completing crypto request in IRQ handler
i2c: riic: fix restart condition
blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()
zram: set physical queue limits to avoid array out of bounds accesses
netfilter: don't track fragmented packets
axonram: Fix gendisk handling
drm/amd/amdgpu: fix console deadlock if late init failed
powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested
EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macro
EDAC, i5000, i5400: Fix definition of NRECMEMB register
kbuild: pkg: use --transform option to prefix paths in tar
coccinelle: fix parallel build with CHECK=scripts/coccicheck
x86/mpx/selftests: Fix up weird arrays
mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()
gre6: use log_ecn_error module parameter in ip6_tnl_rcv()
route: also update fnhe_genid when updating a route cache
route: update fnhe_expires for redirect when the fnhe exists
drivers/rapidio/devices/rio_mport_cdev.c: fix resource leak in error handling path in 'rio_dma_transfer()'
lib/genalloc.c: make the avail variable an atomic_long_t
dynamic-debug-howto: fix optional/omitted ending line number to be LARGE instead of 0
NFS: Fix a typo in nfs_rename()
sunrpc: Fix rpc_task_begin trace point
xfs: fix forgotten rcu read unlock when skipping inode reclaim
dt-bindings: usb: fix reg-property port-number range
block: wake up all tasks blocked in get_request()
sparc64/mm: set fields in deferred pages
zsmalloc: calling zs_map_object() from irq is a bug
sctp: do not free asoc when it is already dead in sctp_sendmsg
sctp: use the right sk after waking up from wait_buf sleep
bpf: fix lockdep splat
clk: uniphier: fix DAPLL2 clock rate of Pro5
atm: horizon: Fix irq release error
jump_label: Invoke jump_label_test() via early_initcall()
xfrm: Copy policy family in clone_policy
IB/mlx4: Increase maximal message size under UD QP
IB/mlx5: Assign send CQ and recv CQ of UMR QP
afs: Connect up the CB.ProbeUuid
Linux 4.9.69
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit c07d353380 upstream.
kallsyms_symbol_next() returns a boolean (true on success). Currently
kdb_read() tests the return value with an inequality that
unconditionally evaluates to true.
This is fixed in the obvious way and, since the conditional branch is
supposed to be unreachable, we also add a WARN_ON().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kdb expects carriage returns through the serial port to terminate
commands. Modify it to accept the first seen carriage return or
new line as a terminator, but not treat \r\n as two terminators.
Change-Id: I06166017e7703d24310eefcb71c3a7d427088db7
Signed-off-by: Colin Cross <ccross@android.com>
commit 2d13bb6494 upstream.
We've got a delay loop waiting for secondary CPUs. That loop uses
loops_per_jiffy. However, loops_per_jiffy doesn't actually mean how
many tight loops make up a jiffy on all architectures. It is quite
common to see things like this in the boot log:
Calibrating delay loop (skipped), value calculated using timer
frequency.. 48.00 BogoMIPS (lpj=24000)
In my case I was seeing lots of cases where other CPUs timed out
entering the debugger only to print their stack crawls shortly after the
kdb> prompt was written.
Elsewhere in kgdb we already use udelay(), so that should be safe enough
to use to implement our timeout. We'll delay 1 ms for 1000 times, which
should give us a full second of delay (just like the old code wanted)
but allow us to notice that we're done every 1 ms.
[akpm@linux-foundation.org: simplifications, per Daniel]
Link: http://lkml.kernel.org/r/1477091361-2039-1-git-send-email-dianders@chromium.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Makes it easier to handle init vs core cleanly, though the change is
fairly invasive across random architectures.
It simplifies the rbtree code immediately, however, while keeping the
core data together in the same cachline (now iff the rbtree code is
enabled).
Acked-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On non-developer devices, kgdb prevents the device from rebooting
after a panic.
Incase of panics and exceptions, to allow the device to reboot, prevent
entering debug mode to avoid getting stuck waiting for the user to
interact with debugger.
To avoid entering the debugger on panic/exception without any extra
configuration, panic_timeout is being used which can be set via
/proc/sys/kernel/panic at run time and CONFIG_PANIC_TIMEOUT sets the
default value.
Setting panic_timeout indicates that the user requested machine to
perform unattended reboot after panic. We dont want to get stuck waiting
for the user input incase of panic.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Cc: Android Kernel Team <kernel-team@android.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Colin Cross <ccross@android.com>
[Kiran: Added context to commit message.
panic_timeout is used instead of break_on_panic and
break_on_exception to honor CONFIG_PANIC_TIMEOUT
Modified the commit as per community feedback]
Signed-off-by: Kiran Raparthy <kiran.kumar@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
All current callers of kdb_getstr() can pass constant pointers via the
prompt argument. This patch adds a const qualification to make explicit
the fact that this is safe.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Currently kdb allows the output of comamnds to be filtered using the
| grep feature. This is useful but does not permit the output emitted
shortly after a string match to be examined without wading through the
entire unfiltered output of the command. Such a feature is particularly
useful to navigate function traces because these traces often have a
useful trigger string *before* the point of interest.
This patch reuses the existing filtering logic to introduce a simple
forward search to kdb that can be triggered from the more prompt.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Currently when the "| grep" feature is used to filter the output of a
command then the prompt is not displayed for the subsequent command.
Likewise any characters typed by the user are also not echoed to the
display. This rather disconcerting problem eventually corrects itself
when the user presses Enter and the kdb_grepping_flag is cleared as
kdb_parse() tries to make sense of whatever they typed.
This patch resolves the problem by moving the clearing of this flag
from the middle of command processing to the beginning.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Issuing a stack dump feels ergonomically wrong when entering due to NMI.
Entering due to NMI is normally a reaction to a user request, either the
NMI button on a server or a "magic knock" on a UART. Therefore the
backtrace behaviour on entry due to NMI should be like SysRq-g (no stack
dump) rather than like oops.
Note also that the stack dump does not offer any information that
cannot be trivial retrieved using the 'bt' command.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Currently when kdb traps printk messages then the raw log level prefix
(consisting of '\001' followed by a numeral) does not get stripped off
before the message is issued to the various I/O handlers supported by
kdb. This causes annoying visual noise as well as causing problems
grepping for ^. It is also a change of behaviour compared to normal usage
of printk() usage. For example <SysRq>-h ends up with different output to
that of kdb's "sr h".
This patch addresses the problem by stripping log levels from messages
before they are issued to the I/O handlers. printk() which can also
act as an i/o handler in some cases is special cased; if the caller
provided a log level then the prefix will be preserved when sent to
printk().
The addition of non-printable characters to the output of kdb commands is a
regression, albeit and extremely elderly one, introduced by commit
04d2c8c83d ("printk: convert the format for KERN_<LEVEL> to a 2 byte
pattern"). Note also that this patch does *not* restore the original
behaviour from v3.5. Instead it makes printk() from within a kdb command
display the message without any prefix (i.e. like printk() normally does).
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
There was a follow on replacement patch against the prior
"kgdb: Timeout if secondary CPUs ignore the roundup".
See: https://lkml.org/lkml/2015/1/7/442
This patch is the delta vs the patch that was committed upstream:
* Fix an off-by-one error in kdb_cpu().
* Replace NR_CPUS with CONFIG_NR_CPUS to tell checkpatch that we
really want a static limit.
* Removed the "KGDB: " prefix from the pr_crit() in debug_core.c
(kgdb-next contains a patch which introduced pr_fmt() to this file
to the tag will now be applied automatically).
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
The output of KDB 'summary' command should report MemTotal, MemFree
and Buffers output in kB. Current codes report in unit of pages.
A define of K(x) as
is defined in the code, but not used.
This patch would apply the define to convert the values to kB.
Please include me on Cc on replies. I do not subscribe to linux-kernel.
Signed-off-by: Jay Lan <jlan@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Pull module and param fixes from Rusty Russell:
"Surprising number of fixes this merge window :(
The first two are minor fallout from the param rework which went in
this merge window.
The next three are a series which fixes a longstanding (but never
previously reported and unlikely , so no CC stable) race between
kallsyms and freeing the init section.
Finally, a minor cleanup as our module refcount will now be -1 during
unload"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
module: make module_refcount() a signed integer.
module: fix race in kallsyms resolution during module load success.
module: remove mod arg from module_free, rename module_memfree().
module_arch_freeing_init(): new hook for archs before module->module_init freed.
param: fix uninitialized read with CONFIG_DEBUG_LOCK_ALLOC
param: initialize store function to NULL if not available.
Currently if an active CPU fails to respond to a roundup request the CPU
that requested the roundup will become stuck. This needlessly reduces the
robustness of the debugger.
This patch introduces a timeout allowing the system state to be examined
even when the system contains unresponsive processors. It also modifies
kdb's cpu command to make it censor attempts to switch to unresponsive
processors and to report their state as (D)ead.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Currently kiosk mode must be explicitly requested by the bootloader or
userspace. It is convenient to be able to change the default value in a
similar manner to CONFIG_MAGIC_SYSRQ_DEFAULT_MASK.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Currently all kdb commands are enabled whenever kdb is deployed. This
makes it difficult to deploy kdb to help debug certain types of
systems.
Android phones provide one example; the FIQ debugger found on some
Android devices has a deliberately weak set of commands to allow the
debugger to enabled very late in the production cycle.
Certain kiosk environments offer another interesting case where an
engineer might wish to probe the system state using passive inspection
commands without providing sufficient power for a passer by to root it.
Without any restrictions, obtaining the root rights via KDB is a matter of
a few commands, and works everywhere. For example, log in as a normal
user:
cbou:~$ id
uid=1001(cbou) gid=1001(cbou) groups=1001(cbou)
Now enter KDB (for example via sysrq):
Entering kdb (current=0xffff8800065bc740, pid 920) due to Keyboard Entry
kdb> ps
23 sleeping system daemon (state M) processes suppressed,
use 'ps A' to see all.
Task Addr Pid Parent [*] cpu State Thread Command
0xffff8800065bc740 920 919 1 0 R 0xffff8800065bca20 *bash
0xffff880007078000 1 0 0 0 S 0xffff8800070782e0 init
[...snip...]
0xffff8800065be3c0 918 1 0 0 S 0xffff8800065be6a0 getty
0xffff8800065b9c80 919 1 0 0 S 0xffff8800065b9f60 login
0xffff8800065bc740 920 919 1 0 R 0xffff8800065bca20 *bash
All we need is the offset of cred pointers. We can look up the offset in
the distro's kernel source, but it is unnecessary. We can just start
dumping init's task_struct, until we see the process name:
kdb> md 0xffff880007078000
0xffff880007078000 0000000000000001 ffff88000703c000 ................
0xffff880007078010 0040210000000002 0000000000000000 .....!@.........
[...snip...]
0xffff8800070782b0 ffff8800073e0580 ffff8800073e0580 ..>.......>.....
0xffff8800070782c0 0000000074696e69 0000000000000000 init............
^ Here, 'init'. Creds are just above it, so the offset is 0x02b0.
Now we set up init's creds for our non-privileged shell:
kdb> mm 0xffff8800065bc740+0x02b0 0xffff8800073e0580
0xffff8800065bc9f0 = 0xffff8800073e0580
kdb> mm 0xffff8800065bc740+0x02b8 0xffff8800073e0580
0xffff8800065bc9f8 = 0xffff8800073e0580
And thus gaining the root:
kdb> go
cbou:~$ id
uid=0(root) gid=0(root) groups=0(root)
cbou:~$ bash
root:~#
p.s. No distro enables kdb by default (although, with a nice KDB-over-KMS
feature availability, I would expect at least some would enable it), so
it's not actually some kind of a major issue.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
This patch introduces several new flags to collect kdb commands into
groups (later allowing them to be optionally disabled).
This follows similar prior art to enable/disable magic sysrq
commands.
The commands have been categorized as follows:
Always on: go (w/o args), env, set, help, ?, cpu (w/o args), sr,
dmesg, disable_nmi, defcmd, summary, grephelp
Mem read: md, mdr, mdp, mds, ef, bt (with args), per_cpu
Mem write: mm
Reg read: rd
Reg write: go (with args), rm
Inspect: bt (w/o args), btp, bta, btc, btt, ps, pid, lsmod
Flow ctrl: bp, bl, bph, bc, be, bd, ss
Signal: kill
Reboot: reboot
All: cpu, kgdb, (and all of the above), nmi_console
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
The actual values of KDB_REPEAT_* enum values and overall logic stayed
the same, but we now treat the values as flags.
This makes it possible to add other flags and combine them, plus makes
the code a lot simpler and shorter. But functionality-wise, there should
be no changes.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.
To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
... instead of naked numbers.
Stuff in sysrq.c used to set it to 8 which is supposed to mean above
default level so set it to DEBUG instead as we're terminating/killing all
tasks and we want to be verbose there.
Also, correct the check in x86_64_start_kernel which should be >= as
we're clearly issuing the string there for all debug levels, not only
the magical 10.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Joe Perches <joe@perches.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is a continuation of efforts trying to optimize find_vma(),
avoiding potentially expensive rbtree walks to locate a vma upon faults.
The original approach (https://lkml.org/lkml/2013/11/1/410), where the
largest vma was also cached, ended up being too specific and random,
thus further comparison with other approaches were needed. There are
two things to consider when dealing with this, the cache hit rate and
the latency of find_vma(). Improving the hit-rate does not necessarily
translate in finding the vma any faster, as the overhead of any fancy
caching schemes can be too high to consider.
We currently cache the last used vma for the whole address space, which
provides a nice optimization, reducing the total cycles in find_vma() by
up to 250%, for workloads with good locality. On the other hand, this
simple scheme is pretty much useless for workloads with poor locality.
Analyzing ebizzy runs shows that, no matter how many threads are
running, the mmap_cache hit rate is less than 2%, and in many situations
below 1%.
The proposed approach is to replace this scheme with a small per-thread
cache, maximizing hit rates at a very low maintenance cost.
Invalidations are performed by simply bumping up a 32-bit sequence
number. The only expensive operation is in the rare case of a seq
number overflow, where all caches that share the same address space are
flushed. Upon a miss, the proposed replacement policy is based on the
page number that contains the virtual address in question. Concretely,
the following results are seen on an 80 core, 8 socket x86-64 box:
1) System bootup: Most programs are single threaded, so the per-thread
scheme does improve ~50% hit rate by just adding a few more slots to
the cache.
+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline | 50.61% | 19.90 |
| patched | 73.45% | 13.58 |
+----------------+----------+------------------+
2) Kernel build: This one is already pretty good with the current
approach as we're dealing with good locality.
+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline | 75.28% | 11.03 |
| patched | 88.09% | 9.31 |
+----------------+----------+------------------+
3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload.
+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline | 70.66% | 17.14 |
| patched | 91.15% | 12.57 |
+----------------+----------+------------------+
4) Ebizzy: There's a fair amount of variation from run to run, but this
approach always shows nearly perfect hit rates, while baseline is just
about non-existent. The amounts of cycles can fluctuate between
anywhere from ~60 to ~116 for the baseline scheme, but this approach
reduces it considerably. For instance, with 80 threads:
+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline | 1.06% | 91.54 |
| patched | 99.97% | 14.18 |
+----------------+----------+------------------+
[akpm@linux-foundation.org: fix nommu build, per Davidlohr]
[akpm@linux-foundation.org: document vmacache_valid() logic]
[akpm@linux-foundation.org: attempt to untangle header files]
[akpm@linux-foundation.org: add vmacache_find() BUG_ON]
[hughd@google.com: add vmacache_valid_mm() (from Oleg)]
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: adjust and enhance comments]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
