commit e5c46fde75 upstream.
After emulating a misaligned load or store issued in Thumb mode, we have
to advance the IT state by hand, or it will get out of sync with the
actual instruction stream, which means we'll end up applying the wrong
condition code to subsequent instructions. This might corrupt the
program state rather catastrophically.
So borrow the it_advance() helper from the probing code, and use it on
CPSR if the emulated instruction is Thumb.
Cc: <stable@vger.kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 747c143072 upstream.
When a nexthop is added, without a gw address, the default scope was set
to 'host'. Thus, when a source address is selected, 127.0.0.1 may be chosen
but rejected when the route is used.
When using a route without a nexthop id, the scope can be configured in the
route, thus the problem doesn't exist.
To explain more deeply: when a user creates a nexthop, it cannot specify
the scope. To create it, the function nh_create_ipv4() calls fib_check_nh()
with scope set to 0. fib_check_nh() calls fib_check_nh_nongw() wich was
setting scope to 'host'. Then, nh_create_ipv4() calls
fib_info_update_nhc_saddr() with scope set to 'host'. The src addr is
chosen before the route is inserted.
When a 'standard' route (ie without a reference to a nexthop) is added,
fib_create_info() calls fib_info_update_nhc_saddr() with the scope set by
the user. iproute2 set the scope to 'link' by default.
Here is a way to reproduce the problem:
ip netns add foo
ip -n foo link set lo up
ip netns add bar
ip -n bar link set lo up
sleep 1
ip -n foo link add name eth0 type dummy
ip -n foo link set eth0 up
ip -n foo address add 192.168.0.1/24 dev eth0
ip -n foo link add name veth0 type veth peer name veth1 netns bar
ip -n foo link set veth0 up
ip -n bar link set veth1 up
ip -n bar address add 192.168.1.1/32 dev veth1
ip -n bar route add default dev veth1
ip -n foo nexthop add id 1 dev veth0
ip -n foo route add 192.168.1.1 nhid 1
Try to get/use the route:
> $ ip -n foo route get 192.168.1.1
> RTNETLINK answers: Invalid argument
> $ ip netns exec foo ping -c1 192.168.1.1
> ping: connect: Invalid argument
Try without nexthop group (iproute2 sets scope to 'link' by dflt):
ip -n foo route del 192.168.1.1
ip -n foo route add 192.168.1.1 dev veth0
Try to get/use the route:
> $ ip -n foo route get 192.168.1.1
> 192.168.1.1 dev veth0 src 192.168.0.1 uid 0
> cache
> $ ip netns exec foo ping -c1 192.168.1.1
> PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
> 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.039 ms
>
> --- 192.168.1.1 ping statistics ---
> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
> rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms
CC: stable@vger.kernel.org
Fixes: 597cfe4fc3 ("nexthop: Add support for IPv4 nexthops")
Reported-by: Edwin Brossette <edwin.brossette@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220713114853.29406-1-nicolas.dichtel@6wind.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 820b8963ad upstream.
The trace event sock_exceed_buf_limit saves the prot->sysctl_mem pointer
and then dereferences it in the TP_printk() portion. This is unsafe as the
TP_printk() portion is executed at the time the buffer is read. That is,
it can be seconds, minutes, days, months, even years later. If the proto
is freed, then this dereference will can also lead to a kernel crash.
Instead, save the sysctl_mem array into the ring buffer and have the
TP_printk() reference that instead. This is the proper and safe way to
read pointers in trace events.
Link: https://lore.kernel.org/all/20220706052130.16368-12-kuniyu@amazon.com/
Cc: stable@vger.kernel.org
Fixes: 3847ce32ae ("core: add tracepoints for queueing skb to rcvbuf")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7edc3945bd upstream.
This reverts commit 46bbe5c671.
As commit 46bbe5c671 ("tracing: fix double free") said, the
"double free" problem reported by clang static analyzer is:
> In parse_var_defs() if there is a problem allocating
> var_defs.expr, the earlier var_defs.name is freed.
> This free is duplicated by free_var_defs() which frees
> the rest of the list.
However, if there is a problem allocating N-th var_defs.expr:
+ in parse_var_defs(), the freed 'earlier var_defs.name' is
actually the N-th var_defs.name;
+ then in free_var_defs(), the names from 0th to (N-1)-th are freed;
IF ALLOCATING PROBLEM HAPPENED HERE!!! -+
\
|
0th 1th (N-1)-th N-th V
+-------------+-------------+-----+-------------+-----------
var_defs: | name | expr | name | expr | ... | name | expr | name | ///
+-------------+-------------+-----+-------------+-----------
These two frees don't act on same name, so there was no "double free"
problem before. Conversely, after that commit, we get a "memory leak"
problem because the above "N-th var_defs.name" is not freed.
If enable CONFIG_DEBUG_KMEMLEAK and inject a fault at where the N-th
var_defs.expr allocated, then execute on shell like:
$ echo 'hist:key=call_site:val=$v1,$v2:v1=bytes_req,v2=bytes_alloc' > \
/sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
Then kmemleak reports:
unreferenced object 0xffff8fb100ef3518 (size 8):
comm "bash", pid 196, jiffies 4295681690 (age 28.538s)
hex dump (first 8 bytes):
76 31 00 00 b1 8f ff ff v1......
backtrace:
[<0000000038fe4895>] kstrdup+0x2d/0x60
[<00000000c99c049a>] event_hist_trigger_parse+0x206f/0x20e0
[<00000000ae70d2cc>] trigger_process_regex+0xc0/0x110
[<0000000066737a4c>] event_trigger_write+0x75/0xd0
[<000000007341e40c>] vfs_write+0xbb/0x2a0
[<0000000087fde4c2>] ksys_write+0x59/0xd0
[<00000000581e9cdf>] do_syscall_64+0x3a/0x80
[<00000000cf3b065c>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Link: https://lkml.kernel.org/r/20220711014731.69520-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 46bbe5c671 ("tracing: fix double free")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14c99d6594 upstream.
Currently the implementation will split the PUD when a fallback is taken
inside the create_huge_pud function. This isn't where it should be done:
the splitting should be done in wp_huge_pud, just like it's done for PMDs.
Reason being that if a callback is taken during create, there is no PUD
yet so nothing to split, whereas if a fallback is taken when encountering
a write protection fault there is something to split.
It looks like this was the original intention with the commit where the
splitting was introduced, but somehow it got moved to the wrong place
between v1 and v2 of the patch series. Rebase mistake perhaps.
Link: https://lkml.kernel.org/r/6f48d622eb8bce1ae5dd75327b0b73894a2ec407.camel@amazon.com
Fixes: 327e9fd489 ("mm: Split huge pages on write-notify or COW")
Signed-off-by: James Gowans <jgowans@amazon.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b64b3b2f1d upstream.
The DEFINE_SPINLOCK() macro shouldn't be used for dynamically allocated
spinlocks. The lockdep warns about this and disables locking validator.
Fix the warning by making lock static.
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
Hardware name: Radxa ROCK Pi 4C (DT)
Call trace:
dump_backtrace.part.0+0xcc/0xe0
show_stack+0x18/0x6c
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
register_lock_class+0x4a8/0x4cc
__lock_acquire+0x78/0x20cc
lock_acquire.part.0+0xe0/0x230
lock_acquire+0x68/0x84
_raw_spin_lock_irqsave+0x84/0xc4
add_desc+0x44/0xc0
pl330_get_desc+0x15c/0x1d0
pl330_prep_dma_cyclic+0x100/0x270
snd_dmaengine_pcm_trigger+0xec/0x1c0
dmaengine_pcm_trigger+0x18/0x24
...
Fixes: e588710311 ("dmaengine: pl330: fix descriptor allocation fail")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20220520181432.149904-1-dmitry.osipenko@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc82bbf4de upstream.
This is another old BUG_ON() that just shouldn't exist (see also commit
a382f8fee4: "signal handling: don't use BUG_ON() for debugging").
In fact, as Matthew Wilcox points out, this condition shouldn't really
even result in a warning, since a negative id allocation result is just
a normal allocation failure:
"I wonder if we should even warn here -- sure, the caller is trying to
free something that wasn't allocated, but we don't warn for
kfree(NULL)"
and goes on to point out how that current error check is only causing
people to unnecessarily do their own index range checking before freeing
it.
This was noted by Itay Iellin, because the bluetooth HCI socket cookie
code does *not* do that range checking, and ends up just freeing the
error case too, triggering the BUG_ON().
The HCI code requires CAP_NET_RAW, and seems to just result in an ugly
splat, but there really is no reason to BUG_ON() here, and we have
generally striven for allocation models where it's always ok to just do
free(alloc());
even if the allocation were to fail for some random reason (usually
obviously that "random" reason being some resource limit).
Fixes: 88eca0207c ("ida: simplified functions for id allocation")
Reported-by: Itay Iellin <ieitayie@gmail.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2cd37c2e72 upstream.
Set return value in rsp_buf alloc error path before going to
error handling.
drivers/misc/cardreader/rtsx_usb.c:639:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!ucr->rsp_buf)
^~~~~~~~~~~~~
drivers/misc/cardreader/rtsx_usb.c:678:9: note: uninitialized use occurs here
return ret;
^~~
drivers/misc/cardreader/rtsx_usb.c:639:2: note: remove the 'if' if its condition is always false
if (!ucr->rsp_buf)
^~~~~~~~~~~~~~~~~~
drivers/misc/cardreader/rtsx_usb.c:622:9: note: initialize the variable 'ret' to silence this warning
int ret;
^
= 0
Fixes: 3776c78559 ("misc: rtsx_usb: use separate command and response buffers")
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220701165352.15687-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7cd3cf0b2 upstream.
The revision of the imx-sdma IP that is in the i.MX8M series is the
same is that as that in the i.MX7 series but the imx7d MODULE_FIRMWARE
directive is wrapped in a condiditional which means it's not defined
when built for aarch64 SOC_IMX8M platforms and hence you get the
following errors when the driver loads on imx8m devices:
imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
imx-sdma 302c0000.dma-controller: external firmware not found, using ROM firmware
Add the SOC_IMX8M into the check so the firmware can load on i.MX8.
Fixes: 1474d48bd6 ("arm64: dts: imx8mq: Add SDMA nodes")
Fixes: 941acd566b ("dmaengine: imx-sdma: Only check ratio on parts that support 1:1")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: stable@vger.kernel.org # v5.2+
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20220606161034.3544803-1-pbrobinson@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83844aacab ]
When packets are not received, they aren't received on $host1_if, so the
message talking about the second host not receiving them is incorrect.
Fix it.
Fixes: d4deb01467 ("selftests: forwarding: Add a test for FDB learning")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a635d3e1c ]
The first host interface has by default no interest in receiving packets
MAC DA de:ad:be:ef:13:37, so it might drop them before they hit the tc
filter and this might confuse the selftest.
Enable promiscuous mode such that the filter properly counts received
packets.
Fixes: d4deb01467 ("selftests: forwarding: Add a test for FDB learning")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8e629b05f ]
As mentioned in the blamed commit, flood_unicast_test() works by
checking the match count on a tc filter placed on the receiving
interface.
But the second host interface (host2_if) has no interest in receiving a
packet with MAC DA de:ad:be:ef:13:37, so its RX filter drops it even
before the ingress tc filter gets to be executed. So we will incorrectly
get the message "Packet was not flooded when should", when in fact, the
packet was flooded as expected but dropped due to an unrelated reason,
at some other layer on the receiving side.
Force h2 to accept this packet by temporarily placing it in promiscuous
mode. Alternatively we could either deliver to its MAC address or use
tcpdump_start, but this has the fewest complications.
This fixes the "flooding" test from bridge_vlan_aware.sh and
bridge_vlan_unaware.sh, which calls flood_test from the lib.
Fixes: 236dd50bf6 ("selftests: forwarding: Add a test for flooded traffic")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b18f09d31 ]
During a reset, there may have been transmits in flight that are no
longer valid and cannot be fulfilled. Resetting and clearing the
queues is insufficient; each skb also needs to be explicitly freed
so that upper levels are not left waiting for confirmation of a
transmit that will never happen. If this happens frequently enough,
the apparent backlog will cause TCP to begin "congestion control"
unnecessarily, culminating in permanently decreased throughput.
Fixes: d7c0ef36bd ("ibmvnic: Free and re-allocate scrqs when tx/rx scrqs change")
Tested-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Rick Lindsley <ricklind@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1adb1563e7 ]
Dropped packets caused by too large frames were not included in
dropped RX packets statistics.
Issue was caused by not reading the GL_RXERR1 register. That register
stores count of packet which was have been dropped due to too large
size.
Fix it by reading GL_RXERR1 register for each interface.
Repro steps:
Send a packet larger than the set MTU to SUT
Observe rx statists: ethtool -S <interface> | grep rx | grep -v ": 0"
Fixes: 41a9e55c89 ("i40e: add missing VSI statistics")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 512d1999b8 ]
When a XSK pool gets mapped, xp_check_dma_contiguity() adds bit 0x1
to pages' DMA addresses that go in ascending order and at 4K stride.
The problem is that the bit does not get cleared before doing unmap.
As a result, a lot of warnings from iommu_dma_unmap_page() are seen
in dmesg, which indicates that lookups by iommu_iova_to_phys() fail.
Fixes: 2b43470add ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220628091848.534803-1-ivan.malov@oktetlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fb779558f ]
"make dtbs_check" complains about the missing "-supply" suffix for
vdd_lvs1_2 which is clearly a typo, originally introduced in the
msm8994-smd-rpm.dtsi file and apparently later copied to
msm8992-xiaomi-libra.dts:
msm8992-lg-bullhead-rev-10/101.dtb: pm8994-regulators: 'vdd_lvs1_2'
does not match any of the regexes:
'.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+'
From schema: regulator/qcom,smd-rpm-regulator.yaml
msm8992-xiaomi-libra.dtb: pm8994-regulators: 'vdd_lvs1_2'
does not match any of the regexes:
'.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+'
From schema: regulator/qcom,smd-rpm-regulator.yaml
Reported-by: Rob Herring <robh@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: f3b2c99e73 ("arm64: dts: Enable onboard SDHCI on msm8992")
Fixes: 0f5cdb31e8 ("arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220627135938.2901871-1-stephan.gerhold@kernkonzept.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0836de513e ]
According to RM bit layout, BIT3 and BIT0 are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Although function is not broken, we should not set reserved bit.
Fixes: 5e4a67ff7f ("arm64: dts: imx8mp-evk: Add i2c3 support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b838582ab8 ]
0x19 is not a valid setting. According to RM bit layout,
BIT3 and BIT0 are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Correct setting with PE PUE set, DSE set to 0.
Fixes: 50d336b12f ("arm64: dts: imx8mp-evk: Add GPIO LED support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d4fb72b68 ]
According to the IOMUXC_SW_PAD_CTL_PAD_UART2_RXD/TXD register define in
imx8mp RM, bit0 and bit3 are reserved, and the uart2 rx/tx pin should
enable the pull up, so need to set bit8 to 1. The original pinctl value
0x49 is incorrect and needs to be changed to 0x140, same as uart1 and
uart3.
Fixes: 9e847693c6 ("arm64: dts: freescale: Add i.MX8MP EVK board support")
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e445976537 upstream.
This ASSERT in xfs_rename is a) incorrect, because
(RENAME_WHITEOUT|RENAME_NOREPLACE) is a valid combination, and
b) unnecessary, because actual invalid flag combinations are already
handled at the vfs level in do_renameat2() before we get called.
So, remove it.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Fixes: 7dcf5c3e45 ("xfs: add RENAME_WHITEOUT support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3b6df2c56 upstream.
Use correct bittiming limits depending on device. For devices based on
USBcanII, Leaf M32C or Leaf i.MX28.
Fixes: 080f40a6fa ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Fixes: b4f20130af ("can: kvaser_usb: add support for Kvaser Leaf v2 and usb mini PCIe")
Fixes: f5d4abea3c ("can: kvaser_usb: Add support for the USBcan-II family")
Link: https://lore.kernel.org/all/20220603083820.800246-4-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
[mkl: remove stray netlink.h include]
[mkl: keep struct can_bittiming_const kvaser_usb_flexc_bittiming_const in kvaser_usb_hydra.c]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
