New features could use the devcom interface but not necessarily
the lag feature although for vport managers and ECPF
still check for lag support.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Register devcom devices with switch id instead of guid.
Devcom interface is used to sync between ports in the eswitch,
e.g. Adding miss rules between the ports.
New eswitch devices could have the same guid but a different
switch id so its more correct to group according to switch id
which is the identifier if the ports are on the same eswitch.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Update devcom infrastructure to be more generic, without
depending on max supported ports definition or a device guid,
and also more encapsulated so callers don't need to pass
the register devcom component id per event call.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Move shared function to check lag is supported to lag header file.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
lock_vma_under_rcu() tries to guarantee that __anon_vma_prepare() can't
be called in the VMA-locked page fault path by ensuring that
vma->anon_vma is set.
However, this check happens before the VMA is locked, which means a
concurrent move_vma() can concurrently call unlink_anon_vmas(), which
disassociates the VMA's anon_vma.
This means we can get UAF in the following scenario:
THREAD 1 THREAD 2
======== ========
<page fault>
lock_vma_under_rcu()
rcu_read_lock()
mas_walk()
check vma->anon_vma
mremap() syscall
move_vma()
vma_start_write()
unlink_anon_vmas()
<syscall end>
handle_mm_fault()
__handle_mm_fault()
handle_pte_fault()
do_pte_missing()
do_anonymous_page()
anon_vma_prepare()
__anon_vma_prepare()
find_mergeable_anon_vma()
mas_walk() [looks up VMA X]
munmap() syscall (deletes VMA X)
reusable_anon_vma() [called on freed VMA X]
This is a security bug if you can hit it, although an attacker would
have to win two races at once where the first race window is only a few
instructions wide.
This patch is based on some previous discussion with Linus Torvalds on
the security list.
Cc: stable@vger.kernel.org
Fixes: 5e31275cc9 ("mm: add per-VMA lock and helper functions to control it")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add code to rebuild the LAG resources when rebuilding the state of the
interface after a reset.
Also added in a function for building per-queue information into the buffer
used to configure VF queues for LAG fail-over. This improves code reuse.
Due to differences in timing per interface for recovering from a reset, add
in the ability to retry on non-local dependencies where needed.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
To support SRIOV LAG, the driver cannot allow changes to an interface's DCB
configuration when in a bond. This would break the ability to modify
interfaces Tx scheduling for fail-over interfaces.
Block kernel generated DCB config events when in a bond.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement checks on what interfaces are eligible for supporting SRIOV VFs
when a member of an aggregate interface.
Implement unwind path for interfaces that become ineligible.
checks for the SRIOV LAG feature bit wrap most of the functional code for
manipulating resources that apply to this feature. Utilize this bit
to track compliant aggregates. Also flag any new entries into the
aggregate as not supporting SRIOV LAG for the time they are in the
non-compliant aggregate.
Once an aggregate has been flagged as non-compliant, only unpopulating the
aggregate and re-populating it will return SRIOV LAG functionality.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add in the functions that will allow a VF created on the primary interface
of a bond to "fail-over" to another PF interface in the bond and continue
to Tx and Rx.
Add in an ordered take-down path for the bonded interface.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The event handler for LAG will create a work item to place on the ordered
workqueue to be processed.
Add in defines for training packets and new recipes to be used by the
switching block of the HW for LAG packet steering.
Update the ice_lag struct to reflect the new processing methodology.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add defines needed for interaction with the FW admin queue interface
in relation to supporting LAG and SRIOV VFs interacting.
Add code, or make non-static previously static functions, to access
the new and changed admin queue calls for LAG.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add the defines, fields, and detection code for FW support of LAG for
SRIOV. Also exposes some previously static functions to allow access
in the lag code.
Clean up code that is unused or not needed for LAG support. Also add
an ordered workqueue for processing LAG events.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_alloc_lan_q_ctx function allocates the queue context array for a
given traffic class. This function uses devm_kcalloc which will
zero-allocate the structure. Thus, prior to any queue being setup by
ice_ena_vsi_txq, the q_ctx structure will have a q_handle of 0 and a q_teid
of 0. These are potentially valid values.
Modify the ice_alloc_lan_q_ctx function to initialize every member of the
q_ctx array to have invalid values. Modify ice_dis_vsi_txq to ensure that
it assigns q_teid to an invalid value when it assigns q_handle to the
invalid value as well.
This will allow other code to check whether the queue context is currently
valid before operating on it.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The nla_for_each_nested parsing in function bpf_sk_storage_diag_alloc
does not check the length of the nested attribute. This can lead to an
out-of-attribute read and allow a malformed nlattr (e.g., length 0) to
be viewed as a 4 byte integer.
This patch adds an additional check when the nlattr is getting counted.
This makes sure the latter nla_get_u32 can access the attributes with
the correct length.
Fixes: 1ed4d92458 ("bpf: INET_DIAG support in bpf_sk_storage")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230725023330.422856-1-linma@zju.edu.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Industrial processor i3255 supports temperatures -40 deg celcius
to 105 deg Celcius. The current implementation of k10temp_read_temp
rounds off any negative temperatures to '0'. To fix this,
the following changes have been made.
A flag 'disp_negative' is added to struct k10temp_data to support
AMD i3255 processors. Flag 'disp_negative' is set if 3255 processor
is found during k10temp_probe. Flag 'disp_negative' is used to
determine whether to round off negative temperatures to '0' in
k10temp_read_temp.
Signed-off-by: Baskaran Kannan <Baski.Kannan@amd.com>
Link: https://lore.kernel.org/r/20230727162159.1056136-1-Baski.Kannan@amd.com
Fixes: aef17ca127 ("hwmon: (k10temp) Only apply temperature offset if result is positive")
Cc: stable@vger.kernel.org
[groeck: Fixed multi-line comment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:
In function ‘fortify_memcpy_chk’,
inlined from ‘wil_rx_crypto_check_edma’ at drivers/net/wireless/ath/wil6210/txrx_edma.c:566:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
where the compiler complains on:
const u8 *pn;
...
pn = (u8 *)&st->ext.pn_15_0;
...
memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN);
and:
In function ‘fortify_memcpy_chk’,
inlined from ‘wil_rx_crypto_check’ at drivers/net/wireless/ath/wil6210/txrx.c:684:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
where the compiler complains on:
const u8 *pn = (u8 *)&d->mac.pn_15_0;
...
memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN);
In both cases, the fortification logic interprets 'memcpy()' as 6-byte
overread of 2-byte field 'pn_15_0' of 'struct wil_rx_status_extension'
and 'pn_15_0' of 'struct vring_rx_mac', respectively. To silence
these warnings, last two fields of the aforementioned structures
are grouped using 'struct_group_attr(pn, __packed' quirk.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230621093711.80118-1-dmantipov@yandex.ru
gcc gets confused when -ftrivial-auto-var-init=pattern is used on sparse
bit fields such as 'struct spi_mem_op', which caused the previous false
positive warning about an uninitialized variable:
drivers/mtd/spi-nor/spansion.c: error: 'op' is used uninitialized [-Werror=uninitialized]
In fact, the variable is fully initialized and gcc does not see it being
used, so the warning is entirely bogus. The problem appears to be
a misoptimization in the initialization of single bit fields when the
rest of the bytes are not initialized.
A previous workaround added another initialization, which ended up
shutting up the warning in spansion.c, though it apparently still happens
in other files as reported by Peter Foley in the gcc bugzilla. The
workaround of adding a fake initialization seems particularly bad
because it would set values that can never be correct but prevent the
compiler from warning about actually missing initializations.
Revert the broken workaround and instead pad the structure to only
have bitfields that add up to full bytes, which should avoid this
behavior in all drivers.
I also filed a new bug against gcc with what I found, so this can
hopefully be addressed in future gcc releases. At the moment, only
gcc-12 and gcc-13 are affected.
Cc: Peter Foley <pefoley2@pefoley.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110743
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108402
Link: https://godbolt.org/z/efMMsG1Kx
Fixes: 420c4495b5 ("mtd: spi-nor: spansion: make sure local struct does not contain garbage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230719190045.4007391-1-arnd@kernel.org
syzkaller found a race where IOMMUFD_DESTROY increments the refcount:
obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY);
if (IS_ERR(obj))
return PTR_ERR(obj);
iommufd_ref_to_users(obj);
/* See iommufd_ref_to_users() */
if (!iommufd_object_destroy_user(ucmd->ictx, obj))
As part of the sequence to join the two existing primitives together.
Allowing the refcount the be elevated without holding the destroy_rwsem
violates the assumption that all temporary refcount elevations are
protected by destroy_rwsem. Racing IOMMUFD_DESTROY with
iommufd_object_destroy_user() will cause spurious failures:
WARNING: CPU: 0 PID: 3076 at drivers/iommu/iommufd/device.c:477 iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:478
Modules linked in:
CPU: 0 PID: 3076 Comm: syz-executor.0 Not tainted 6.3.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
RIP: 0010:iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:477
Code: e8 3d 4e 00 00 84 c0 74 01 c3 0f 0b c3 0f 1f 44 00 00 f3 0f 1e fa 48 89 fe 48 8b bf a8 00 00 00 e8 1d 4e 00 00 84 c0 74 01 c3 <0f> 0b c3 0f 1f 44 00 00 41 57 41 56 41 55 4c 8d ae d0 00 00 00 41
RSP: 0018:ffffc90003067e08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888109ea0300 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000ffffffff
RBP: 0000000000000004 R08: 0000000000000000 R09: ffff88810bbb3500
R10: ffff88810bbb3e48 R11: 0000000000000000 R12: ffffc90003067e88
R13: ffffc90003067ea8 R14: ffff888101249800 R15: 00000000fffffffe
FS: 00007ff7254fe6c0(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555557262da8 CR3: 000000010a6fd000 CR4: 0000000000350ef0
Call Trace:
<TASK>
iommufd_test_create_access drivers/iommu/iommufd/selftest.c:596 [inline]
iommufd_test+0x71c/0xcf0 drivers/iommu/iommufd/selftest.c:813
iommufd_fops_ioctl+0x10f/0x1b0 drivers/iommu/iommufd/main.c:337
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x84/0xc0 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The solution is to not increment the refcount on the IOMMUFD_DESTROY path
at all. Instead use the xa_lock to serialize everything. The refcount
check == 1 and xa_erase can be done under a single critical region. This
avoids the need for any refcount incrementing.
It has the downside that if userspace races destroy with other operations
it will get an EBUSY instead of waiting, but this is kind of racing is
already dangerous.
Fixes: 2ff4bed7fe ("iommufd: File descriptor, context, kconfig and makefiles")
Link: https://lore.kernel.org/r/2-v1-85aacb2af554+bc-iommufd_syz3_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: syzbot+7574ebfe589049630608@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Arseniy Krasnov says:
====================
virtio/vsock: some updates for MSG_PEEK flag
This patchset does several things around MSG_PEEK flag support. In
general words it reworks MSG_PEEK test and adds support for this flag
in SOCK_SEQPACKET logic. Here is per-patch description:
1) This is cosmetic change for SOCK_STREAM implementation of MSG_PEEK:
1) I think there is no need of "safe" mode walk here as there is no
"unlink" of skbs inside loop (it is MSG_PEEK mode - we don't change
queue).
2) Nested while loop is removed: in case of MSG_PEEK we just walk
over skbs and copy data from each one. I guess this nested loop
even didn't behave as loop - it always executed just for single
iteration.
2) This adds MSG_PEEK support for SOCK_SEQPACKET. It could be implemented
be reworking MSG_PEEK callback for SOCK_STREAM to support SOCK_SEQPACKET
also, but I think it will be more simple and clear from potential
bugs to implemented it as separate function thus not mixing logics
for both types of socket. So I've added it as dedicated function.
3) This is reworked MSG_PEEK test for SOCK_STREAM. Previous version just
sent single byte, then tried to read it with MSG_PEEK flag, then read
it in normal way. New version is more complex: now sender uses buffer
instead of single byte and this buffer is initialized with random
values. Receiver tests several things:
1) Read empty socket with MSG_PEEK flag.
2) Read part of buffer with MSG_PEEK flag.
3) Read whole buffer with MSG_PEEK flag, then checks that it is same
as buffer from 2) (limited by size of buffer from 2) of course).
4) Read whole buffer without any flags, then checks that it is same
as buffer from 3).
4) This is MSG_PEEK test for SOCK_SEQPACKET. It works in the same way
as for SOCK_STREAM, except it also checks combination of MSG_TRUNC
and MSG_PEEK.
====================
Link: https://lore.kernel.org/r/20230725172912.1659970-1-AVKrasnov@sberdevices.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as
SOCK_STREAM test, except it also tests MSG_TRUNC flag.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This new version makes test more complicated by adding empty read,
partial read and data comparisons between MSG_PEEK and normal reads.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds support of MSG_PEEK flag for SOCK_SEQPACKET type of socket.
Difference with SOCK_STREAM is that this callback returns either length
of the message or error.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reworks current implementation of MSG_PEEK logic:
1) Replaces 'skb_queue_walk_safe()' with 'skb_queue_walk()'. There is
no need in the first one, as there are no removes of skb in loop.
2) Removes nested while loop - MSG_PEEK logic could be implemented
without it: just iterate over skbs without removing it and copy
data from each until destination buffer is not full.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SoCFPGA dts fix for v6.5
- Fix incorrect I2C property for SCL signal
* tag 'socfpga_dts_fix_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10: fix incorrect I2C property for SCL signal
Link: https://lore.kernel.org/r/20230724145617.887443-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Memory controller drivers - fixes for v6.5
Two fixes are needed for Tegra194 memory controllers caused by the same
Tegra PCI commit merged in v6.5-rc1. The Tegra PCI requires now
interconnect from the memory controller, which was set only for
Tegra234, but not for Tegra194, causing probe deferrals. Expose some
dummy interconnect provider for Tegra194, to satisfy PCI driver needs.
* tag 'memory-controller-drv-fixes-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra: make icc_set_bw return zero if BWMGR not supported
memory: tegra: Add dummy implementation on Tegra194
Link: https://lore.kernel.org/r/20230726084811.124038-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 6.5:
- A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
frequency of sk-imx53 board
- Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux
- A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl
- A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
VPU label and gpio-line-names
- Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev
child, so that runtime PM can translate into the necessary GPC power
domain action
* tag 'imx-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
arm64: dts: freescale: Fix VPU G2 clock
arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
arm64: dts: phycore-imx8mm: Correction in gpio-line-names
arm64: dts: phycore-imx8mm: Label typo-fix of VPU
ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
Link: https://lore.kernel.org/r/20230725075837.GR151430@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The corgi_lcd_limit_intensity() function is called from platform
and defined in a driver, but the driver does not see the declaration:
drivers/video/backlight/corgi_lcd.c:434:6: error: no previous prototype for 'corgi_lcd_limit_intensity' [-Werror=missing-prototypes]
434 | void corgi_lcd_limit_intensity(int limit)
Move the prototype into a header that can be included from both
sides to shut up the warning.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Prior to this change, events without a group would be sorted as if they
were from the location of the first event without a group. For example
instructions and cycles are without a group:
instructions,{imc_free_running/data_read/,imc_free_running/data_write/},cycles
parse events would create an eventual evlist like:
instructions,cycles,{uncore_imc_free_running_0/data_read/,uncore_imc_free_running_1/data_read/,uncore_imc_free_running_0/data_write/,uncore_imc_free_running_1/data_write/}
This is done so that perf metric events, that must always be in a
group, will be adjacent and so can be forced into a group.
This change modifies the sorting so that only force grouped events,
like perf metrics, are sorted and all other events keep their position
with respect to groups in the evlist. The location of the force
grouped event is chosen to match the first force grouped event.
For architectures without force grouped events, ie anything not Intel
Icelake or newer, this should mean sorting and fixing doesn't modify
the event positions except when fixing the grouping for PMUs of things
like uncore events.
Fixes: 347c2f0a09 ("perf parse-events: Sort and group parsed events")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230719001836.198363-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evsel grouping fix iterates over evsels tracking the leader group
and the current position's group, updating the current position's leader
if an evsel is being forced into a group or groups changed. However,
groups changing isn't a sufficient condition as sorting may have
reordered events and the leader may no longer come first. For this
reason update all leaders whenever they disagree.
This change breaks certain Icelake+ metrics due to bugs in the
kernel. For example, tma_l3_bound with threshold enabled tries to
program the events:
{topdown-retiring,slots,CYCLE_ACTIVITY.STALLS_L2_MISS,topdown-fe-bound,EXE_ACTIVITY.BOUND_ON_STORES,EXE_ACTIVITY.1_PORTS_UTIL,topdown-be-bound,cpu/INT_MISC.RECOVERY_CYCLES,cmask=1,edge/,CYCLE_ACTIVITY.STALLS_L3_MISS,CPU_CLK_UNHALTED.THREAD,CYCLE_ACTIVITY.STALLS_MEM_ANY,EXE_ACTIVITY.2_PORTS_UTIL,CYCLE_ACTIVITY.STALLS_TOTAL,topdown-bad-spec}:W
fixing the perf metric event order gives:
{slots,topdown-retiring,topdown-fe-bound,topdown-be-bound,topdown-bad-spec,CYCLE_ACTIVITY.STALLS_L2_MISS,EXE_ACTIVITY.BOUND_ON_STORES,EXE_ACTIVITY.1_PORTS_UTIL,cpu/INT_MISC.RECOVERY_CYCLES,cmask=1,edge/,CYCLE_ACTIVITY.STALLS_L3_MISS,CPU_CLK_UNHALTED.THREAD,CYCLE_ACTIVITY.STALLS_MEM_ANY,EXE_ACTIVITY.2_PORTS_UTIL,CYCLE_ACTIVITY.STALLS_TOTAL}:W
Both of these return "<not counted>" for all events, whilst they work
with the group removed respecting that the perf metric events must still
be grouped. A vendor events update will need to add METRIC_NO_GROUP to
these metrics to workaround the kernel PMU driver issue.
Fixes: a90cc5a9ee ("perf evsel: Don't let evsel__group_pmu_name() traverse unsorted group")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230719001836.198363-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf metric (topdown) events on Intel Icelake+ machines require a
group, however, they may be next to events that don't require a group.
Consider:
cycles,slots,topdown-fe-bound
The cycles event needn't be grouped but slots and topdown-fe-bound need
grouping.
Prior to this change, as slots and topdown-fe-bound need a group forcing
and all events share the same PMU, slots and topdown-fe-bound would be
forced into a group with cycles.
This is a bug on two fronts, cycles wasn't supposed to be grouped and
cycles can't be a group leader with a perf metric event.
This change adds recognition that cycles isn't force grouped and so it
shouldn't be force grouped with slots and topdown-fe-bound.
Fixes: a90cc5a9ee ("perf evsel: Don't let evsel__group_pmu_name() traverse unsorted group")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230719001836.198363-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered.
Reported by German when working on qemu-storage-deamon which requires
single thread ublk daemon.
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Reported-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ASoC: Fixes for v6.5
A collection of device specific fixes, none particularly remarkable.
There's a set of repetitive fixes for the RealTek drivers fixing an
issue with suspend that was replicated in multiple drivers.
The flow-control of `bm_find` is very deeply nested with a conditional
comparing a ternary expression against the pattern inside a for-loop
inside a while-loop inside a for-loop.
Move the inner for-loop into a helper function to reduce the amount of
indentation and make the code easier to read.
Fix indentation and trailing white-space in preceding debug logging
statement.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
In current ctnetlink_parse_tuple_ip() function, nested parsing and
validation is splitting as two parts, which could be cleanup to a
simplified form. As the nla_parse_nested_deprecated function
supports validation in the fly. These two finially reach same place
__nla_validate_parse with same validate flag.
nla_parse_nested_deprecated
__nla_parse(.., NL_VALIDATE_LIBERAL, ..)
__nla_validate_parse
nla_validate_nested_deprecated
__nla_validate_nested(.., NL_VALIDATE_LIBERAL, ..)
__nla_validate
__nla_validate_parse
This commit removes the call to nla_validate_nested_deprecated and pass
cta_ip_nla_policy when do parsing.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
nf_tables relies on manual test of netlink attributes coming from userspace
even in cases where this could be handled via netlink policy.
Convert a bunch of 'flag' attributes to use NLA_POLICY_MASK checks.
Signed-off-by: Florian Westphal <fw@strlen.de>
__NLA_IS_BEINT_TYPE(tp) isn't useful. NLA_BE16/32 are identical to
NLA_U16/32, the only difference is that it tells the netlink validation
functions that byteorder conversion might be needed before comparing
the value to the policy min/max ones.
After this change all policy macros that can be used with UINT types,
such as NLA_POLICY_MASK() can also be used with NLA_BE16/32.
This will be used to validate nf_tables flag attributes which
are in bigendian byte order.
Signed-off-by: Florian Westphal <fw@strlen.de>
When building with W=1, the following warning occurs.
net/netfilter/nf_conntrack_proto_dccp.c:72:27: warning: ‘dccp_state_names’ defined but not used [-Wunused-const-variable=]
static const char * const dccp_state_names[] = {
We include dccp_state_names in the macro
CONFIG_NF_CONNTRACK_PROCFS, since it is only used in the place
which is included in the macro CONFIG_NF_CONNTRACK_PROCFS.
Fixes: 2bc780499a ("[NETFILTER]: nf_conntrack: add DCCP protocol support")
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Since commit bb1520d581 ("s390/mm: start kernel with DAT enabled")
the kernel crashes early during boot when debug pagealloc is enabled:
mem auto-init: stack:off, heap alloc:off, heap free:off
addressing exception: 0005 ilc:2 [#1] SMP DEBUG_PAGEALLOC
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-09759-gc5666c912155 #630
[..]
Krnl Code: 00000000001325f6: ec5600248064 cgrj %r5,%r6,8,000000000013263e
00000000001325fc: eb880002000c srlg %r8,%r8,2
#0000000000132602: b2210051 ipte %r5,%r1,%r0,0
>0000000000132606: b90400d1 lgr %r13,%r1
000000000013260a: 41605008 la %r6,8(%r5)
000000000013260e: a7db1000 aghi %r13,4096
0000000000132612: b221006d ipte %r6,%r13,%r0,0
0000000000132616: e3d0d0000171 lay %r13,4096(%r13)
Call Trace:
__kernel_map_pages+0x14e/0x320
__free_pages_ok+0x23a/0x5a8)
free_low_memory_core_early+0x214/0x2c8
memblock_free_all+0x28/0x58
mem_init+0xb6/0x228
mm_core_init+0xb6/0x3b0
start_kernel+0x1d2/0x5a8
startup_continue+0x36/0x40
Kernel panic - not syncing: Fatal exception: panic_on_oops
This is caused by using large mappings on machines with EDAT1/EDAT2. Add
the code to split the mappings into 4k pages if debug pagealloc is enabled
by CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT or the debug_pagealloc kernel
command line option.
Fixes: bb1520d581 ("s390/mm: start kernel with DAT enabled")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If tipc_link_bc_create() fails inside tipc_node_create() for a newly
allocated tipc node then we should stop its tipc crypto and free the
resources allocated with a call to tipc_crypto_start().
As the node ref is initialized to one to that point, just put the ref on
tipc_link_bc_create() error case that would lead to tipc_node_free() be
eventually executed and properly clean the node and its crypto resources.
Found by Linux Verification Center (linuxtesting.org).
Fixes: cb8092d70a ("tipc: move bc link creation back to tipc_node_create")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230725214628.25246-1-pchelkin@ispras.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
kernel test robot reported slab-out-of-bounds access in strlen(). [0]
Commit 06d4c8a808 ("af_unix: Fix fortify_panic() in unix_bind_bsd().")
removed unix_mkname_bsd() call in unix_bind_bsd().
If sunaddr->sun_path is not terminated by user and we don't enable
CONFIG_INIT_STACK_ALL_ZERO=y, strlen() will do the out-of-bounds access
during file creation.
Let's go back to strlen()-with-sockaddr_storage way and pack all 108
trickiness into unix_mkname_bsd() with bold comments.
[0]:
BUG: KASAN: slab-out-of-bounds in strlen (lib/string.c:?)
Read of size 1 at addr ffff000015492777 by task fortify_strlen_/168
CPU: 0 PID: 168 Comm: fortify_strlen_ Not tainted 6.5.0-rc1-00333-g3329b603ebba #16
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:235)
show_stack (arch/arm64/kernel/stacktrace.c:242)
dump_stack_lvl (lib/dump_stack.c:107)
print_report (mm/kasan/report.c:365 mm/kasan/report.c:475)
kasan_report (mm/kasan/report.c:590)
__asan_report_load1_noabort (mm/kasan/report_generic.c:378)
strlen (lib/string.c:?)
getname_kernel (./include/linux/fortify-string.h:? fs/namei.c:226)
kern_path_create (fs/namei.c:3926)
unix_bind (net/unix/af_unix.c:1221 net/unix/af_unix.c:1324)
__sys_bind (net/socket.c:1792)
__arm64_sys_bind (net/socket.c:1801)
invoke_syscall (arch/arm64/kernel/syscall.c:? arch/arm64/kernel/syscall.c:52)
el0_svc_common (./include/linux/thread_info.h:127 arch/arm64/kernel/syscall.c:147)
do_el0_svc (arch/arm64/kernel/syscall.c:189)
el0_svc (./arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:144 arch/arm64/kernel/entry-common.c:648)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:?)
el0t_64_sync (arch/arm64/kernel/entry.S:591)
Allocated by task 168:
kasan_set_track (mm/kasan/common.c:45 mm/kasan/common.c:52)
kasan_save_alloc_info (mm/kasan/generic.c:512)
__kasan_kmalloc (mm/kasan/common.c:383)
__kmalloc (mm/slab_common.c:? mm/slab_common.c:998)
unix_bind (net/unix/af_unix.c:257 net/unix/af_unix.c:1213 net/unix/af_unix.c:1324)
__sys_bind (net/socket.c:1792)
__arm64_sys_bind (net/socket.c:1801)
invoke_syscall (arch/arm64/kernel/syscall.c:? arch/arm64/kernel/syscall.c:52)
el0_svc_common (./include/linux/thread_info.h:127 arch/arm64/kernel/syscall.c:147)
do_el0_svc (arch/arm64/kernel/syscall.c:189)
el0_svc (./arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:144 arch/arm64/kernel/entry-common.c:648)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:?)
el0t_64_sync (arch/arm64/kernel/entry.S:591)
The buggy address belongs to the object at ffff000015492700
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 0 bytes to the right of
allocated 119-byte region [ffff000015492700, ffff000015492777)
The buggy address belongs to the physical page:
page:00000000aeab52ba refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x55492
anon flags: 0x3fffc0000000200(slab|node=0|zone=0|lastcpupid=0xffff)
page_type: 0xffffffff()
raw: 03fffc0000000200 ffff0000084018c0 fffffc00003d0e00 0000000000000005
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff000015492600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff000015492680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff000015492700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 fc
^
ffff000015492780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff000015492800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 06d4c8a808 ("af_unix: Fix fortify_panic() in unix_bind_bsd().")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/netdev/202307262110.659e5e8-oliver.sang@intel.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230726190828.47874-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
