[ Upstream commit 720b47229a ]
The gfx.cp_ecc_error_irq is retired in gfx11. In gfx_v11_0_hw_fini still
use amdgpu_irq_put to disable this interrupt, which caused the call trace
in this function.
[ 102.873958] Call Trace:
[ 102.873959] <TASK>
[ 102.873961] gfx_v11_0_hw_fini+0x23/0x1e0 [amdgpu]
[ 102.874019] gfx_v11_0_suspend+0xe/0x20 [amdgpu]
[ 102.874072] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[ 102.874122] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 102.874172] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[ 102.874223] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[ 102.874321] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 102.874375] process_one_work+0x21f/0x3f0
[ 102.874377] worker_thread+0x200/0x3e0
[ 102.874378] ? process_one_work+0x3f0/0x3f0
[ 102.874379] kthread+0xfd/0x130
[ 102.874380] ? kthread_complete_and_exit+0x20/0x20
[ 102.874381] ret_from_fork+0x22/0x30
v2:
- Handle umc and gfx ras cases in separated patch
- Retired the gfx_v11_0_cp_ecc_error_irq_funcs in gfx11
v3:
- Improve the subject and code comments
- Add judgment on gfx11 in the function of amdgpu_gfx_ras_late_init
v4:
- Drop the define of CP_ME1_PIPE_INST_ADDR_INTERVAL and
SET_ECC_ME_PIPE_STATE which using in gfx_v11_0_set_cp_ecc_error_state
- Check cp_ecc_error_irq.funcs rather than ip version for a more
sustainable life
v5:
- Simplify judgment conditions
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 385c3e4c29 ]
[Why]
In 2560x1600@240p eDP panel, driver use lowest voltage level
to play 1080p video cause underflow. According to HW SPEC,
the senario should use high voltage level.
[How]
ChromaPre value is zero when bandwidth validation.
Correct ChromaPre calculation.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b20566cdef ]
The DP AUX interrupt handling was a bit of a mess.
* There were two functions (one for "native" transfers and one for
"i2c" transfers) that were quite similar. It was hard to say how
many of the differences between the two functions were on purpose
and how many of them were just an accident of how they were coded.
* Each function sometimes used "else if" to test for error bits and
sometimes didn't and again it was hard to say if this was on purpose
or just an accident.
* The two functions wouldn't notice whether "unknown" bits were
set. For instance, there seems to be a bit "DP_INTR_PLL_UNLOCKED"
and if it was set there would be no indication.
* The two functions wouldn't notice if more than one error was set.
Let's fix this by being more consistent / explicit about what we're
doing.
By design this could cause different handling for AUX transfers,
though I'm not actually aware of any bug fixed as a result of
this patch (this patch was created because we simply noticed how odd
the old code was by code inspection). Specific notes here:
1. In the old native transfer case if we got "done + wrong address"
we'd ignore the "wrong address" (because of the "else if"). Now we
won't.
2. In the old native transfer case if we got "done + timeout" we'd
ignore the "timeout" (because of the "else if"). Now we won't.
3. In the old native transfer case we'd see "nack_defer" and translate
it to the error number for "nack". This differed from the i2c
transfer case where "nack_defer" was given the error number for
"nack_defer". This 100% can't matter because the only user of this
error number treats "nack defer" the same as "nack", so it's clear
that the difference between the "native" and "i2c" was pointless
here.
4. In the old i2c transfer case if we got "done" plus any error
besides "nack" or "defer" then we'd ignore the error. Now we don't.
5. If there is more than one error signaled by the hardware it's
possible that we'll report a different one than we used to. I don't
know if this matters. If someone is aware of a case this matters we
should document it and change the code to make it explicit.
6. One quirk we keep (I don't know if this is important) is that in
the i2c transfer case if we see "done + defer" we report that as a
"nack". That seemed too intentional in the old code to just drop.
After this change we will add extra logging, including:
* A warning if we see more than one error bit set.
* A warning if we see an unexpected interrupt.
* A warning if we get an AUX transfer interrupt when shouldn't.
It actually turns out that as a result of this change then at boot we
sometimes see an error:
[drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy
That means that, during init, we are seeing DP_INTR_PLL_UNLOCKED. For
now I'm going to say that leaving this error reported in the logs is
OK-ish and hopefully it will encourage someone to track down what's
going on at init time.
One last note here is that this change renames one of the interrupt
bits. The bit named "i2c done" clearly was used for native transfers
being done too, so I renamed it to indicate this.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/520658/
Link: https://lore.kernel.org/r/20230126170745.v2.1.I90ffed3ddd21e818ae534f820cb4d6d8638859ab@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2429b3c529 ]
In tegra_sor_compute_config(), the 32-bit value mode->clock is
multiplied by 1000, and assigned to the u64 variable pclk. We can avoid
a potential 32-bit integer overflow by casting mode->clock to u64 before
we do the arithmetic and assignment.
Signed-off-by: Nur Hussein <hussein@unixcat.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37403ced9f ]
[Why]
Observing underflow on dcn30+ system config at 4k144hz
[How]
We set the UCLK hardmax on AC/DC switch if softmax is enabled
and also on boot. While booting up the UCLK Hardmax is set
to softmax before the init sequence and the init sequence
resets the hardmax to UCLK max which enables P-state switching.
Just added a conditional check to avoid setting hardmax on init.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ayush Gupta <ayugupta@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5af48eedc ]
This fixes a use-after-free crash during rmmod.
The DRM encoder is embedded inside the larger rockchip_hdmi,
which is allocated with the component. The component memory
gets freed before the main drm device is destroyed. Fix it
by running encoder cleanup before tearing down its container.
Signed-off-by: Toby Chen <tobyc@nvidia.com>
[moved encoder cleanup above clk_disable, similar to bind-error-path]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230317005126.496-1-tobyc@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7222f5841f ]
[Why & How]
DC now uses a new commit sequence which is more robust since it
addresses cases where we need to reorganize pipes based on planes and
other parameters. As a result, this new commit sequence reset the DC
state by cleaning plane states and re-creating them accordingly with the
need. For this reason, the dce_transform_set_pixel_storage_depth can be
invoked after a plane state is destroyed and before its re-creation. In
this situation and on DCE devices, DC will hit a condition that will
trigger a dmesg log that looks like this:
Console: switching to colour frame buffer device 240x67
------------[ cut here ]------------
[..]
Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 5603 07/28/2020
RIP: 0010:dce_transform_set_pixel_storage_depth+0x3f8/0x480 [amdgpu]
[..]
RSP: 0018:ffffc9000202b850 EFLAGS: 00010293
RAX: ffffffffa081d100 RBX: ffff888110790000 RCX: 000000000000000c
RDX: ffff888100bedbf8 RSI: 0000000000001a50 RDI: ffff88810463c900
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000007
R10: 0000000000000001 R11: 0000000000000f00 R12: ffff88810f500010
R13: ffff888100bedbf8 R14: ffff88810f515688 R15: 0000000000000000
FS: 00007ff0159249c0(0000) GS:ffff88840e940000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff01528e550 CR3: 0000000002a10000 CR4: 00000000003506e0
Call Trace:
<TASK>
? dm_write_reg_func+0x21/0x80 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
dc_stream_set_dither_option+0xfb/0x130 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
amdgpu_dm_crtc_configure_crc_source+0x10b/0x190 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
amdgpu_dm_atomic_commit_tail+0x20a8/0x2a90 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
? free_unref_page_commit+0x98/0x170
? free_unref_page+0xcc/0x150
commit_tail+0x94/0x120
drm_atomic_helper_commit+0x10f/0x140
drm_atomic_commit+0x94/0xc0
? drm_plane_get_damage_clips.cold+0x1c/0x1c
drm_client_modeset_commit_atomic+0x203/0x250
drm_client_modeset_commit_locked+0x56/0x150
drm_client_modeset_commit+0x21/0x40
drm_fb_helper_lastclose+0x42/0x70
amdgpu_driver_lastclose_kms+0xa/0x10 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
drm_release+0xda/0x110
__fput+0x89/0x240
task_work_run+0x5c/0x90
do_exit+0x333/0xae0
do_group_exit+0x2d/0x90
__x64_sys_exit_group+0x14/0x20
do_syscall_64+0x5b/0x80
? exit_to_user_mode_prepare+0x1e/0x140
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7ff016ceaca1
Code: Unable to access opcode bytes at RIP 0x7ff016ceac77.
RSP: 002b:00007ffe7a2357e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00007ff016e15a00 RCX: 00007ff016ceaca1
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffffffffff78 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff016e15a00
R13: 0000000000000000 R14: 00007ff016e1aee8 R15: 00007ff016e1af00
</TASK>
Since this issue only happens in a transition state on DC, this commit
replace BREAK_TO_DEBUGGER with DC_LOG_DC.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97fa4dfa66 ]
[Why]
There is underflow and flickering occuring. The
underflow stops when hostvm is forced to active.
According to policy, hostvm should be enabled if riommu
is active, but this is not taken into account when
deciding whether to enable hostvm.
[What]
For DCN314, set hostvm to true if riommu is active.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26a9f53198 ]
[Why]
In 2560x1440@240p eDP panel, some use cases will enable MPC
combine with RGB MPO then underflow happened. This case is
not allowed from HW formula.
[How]
Correct eDP, DP and DP2 output bpp calculation to align HW
formula.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bb10b7aae ]
[Why]
System restart observed while changing the display resolution
to 8k with extended mode. Sytem restart was caused by a page fault.
[How]
When the driver populates subvp info it did it for both the pipes using
vblank which caused an outof bounds array access causing the page fault.
added checks to allow the top pipe only to fix this issue.
Co-authored-by: Ayush Gupta <ayush.gupta@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ayush Gupta <ayush.gupta@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 157821fb3e ]
There are new cases where we want to block i915 probe, such
as when experimenting or developing the new Xe driver.
But also, with the new hybrid cards, users or developers might
want to use i915 only on integrated and fully block the probe
of the i915 for the discrete. Or vice versa.
There are even older development and validation reasons,
like when you use some distro where the modprobe.blacklist is
not present.
But in any case, let's introduce a more granular control, but without
introducing yet another parameter, but using the existent force_probe
one.
Just by adding a ! in the begin of the id in the force_probe, like
in this case where we would block the probe for Alder Lake:
$ insmod i915.ko force_probe='!46a6'
v2: Take care of '*' and '!*' cases as pointed out by
Gustavo and Jani.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103194701.1492984-1-rodrigo.vivi@intel.com
Stable-dep-of: 79c901c935 ("drm/i915: taint kernel when force probing unsupported devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ff80028e2 ]
drm_dp_dsc_sink_max_slice_count() may return 0 if something goes
wrong on the part of the DSC sink and its DPCD register. This null
value may be later used as a divisor in intel_dsc_compute_params(),
which will lead to an error.
In the unlikely event that this issue occurs, fix it by testing the
return value of drm_dp_dsc_sink_max_slice_count() against zero.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: a4a157777c ("drm/i915/dp: Compute DSC pipe config in atomic check")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418140430.69902-1-n.zhandarovich@fintech.ru
(cherry picked from commit 51f7008239)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8687694bb ]
The fbdev test of IGT may write after EOF, which lead to out-of-bound
access for drm drivers with fbdev-generic. For example, run fbdev test
on a x86+ast2400 platform, with 1680x1050 resolution, will cause the
linux kernel hang with the following call trace:
Oops: 0000 [#1] PREEMPT SMP PTI
[IGT] fbdev: starting subtest eof
Workqueue: events drm_fb_helper_damage_work [drm_kms_helper]
[IGT] fbdev: starting subtest nullptr
RIP: 0010:memcpy_erms+0xa/0x20
RSP: 0018:ffffa17d40167d98 EFLAGS: 00010246
RAX: ffffa17d4eb7fa80 RBX: ffffa17d40e0aa80 RCX: 00000000000014c0
RDX: 0000000000001a40 RSI: ffffa17d40e0b000 RDI: ffffa17d4eb80000
RBP: ffffa17d40167e20 R08: 0000000000000000 R09: ffff89522ecff8c0
R10: ffffa17d4e4c5000 R11: 0000000000000000 R12: ffffa17d4eb7fa80
R13: 0000000000001a40 R14: 000000000000041a R15: ffffa17d40167e30
FS: 0000000000000000(0000) GS:ffff895257380000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa17d40e0b000 CR3: 00000001eaeca006 CR4: 00000000001706e0
Call Trace:
<TASK>
? drm_fbdev_generic_helper_fb_dirty+0x207/0x330 [drm_kms_helper]
drm_fb_helper_damage_work+0x8f/0x170 [drm_kms_helper]
process_one_work+0x21f/0x430
worker_thread+0x4e/0x3c0
? __pfx_worker_thread+0x10/0x10
kthread+0xf4/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
CR2: ffffa17d40e0b000
---[ end trace 0000000000000000 ]---
The is because damage rectangles computed by
drm_fb_helper_memory_range_to_clip() function is not guaranteed to be
bound in the screen's active display area. Possible reasons are:
1) Buffers are allocated in the granularity of page size, for mmap system
call support. The shadow screen buffer consumed by fbdev emulation may
also choosed be page size aligned.
2) The DIV_ROUND_UP() used in drm_fb_helper_memory_range_to_clip()
will introduce off-by-one error.
For example, on a 16KB page size system, in order to store a 1920x1080
XRGB framebuffer, we need allocate 507 pages. Unfortunately, the size
1920*1080*4 can not be divided exactly by 16KB.
1920 * 1080 * 4 = 8294400 bytes
506 * 16 * 1024 = 8290304 bytes
507 * 16 * 1024 = 8306688 bytes
line_length = 1920*4 = 7680 bytes
507 * 16 * 1024 / 7680 = 1081.6
off / line_length = 507 * 16 * 1024 / 7680 = 1081
DIV_ROUND_UP(507 * 16 * 1024, 7680) will yeild 1082
memcpy_toio() typically issue the copy line by line, when copy the last
line, out-of-bound access will be happen. Because:
1082 * line_length = 1082 * 7680 = 8309760, and 8309760 > 8306688
Note that userspace may still write to the invisiable area if a larger
buffer than width x stride is exposed. But it is not a big issue as
long as there still have memory resolve the access if not drafting so
far.
- Also limit the y1 (Daniel)
- keep fix patch it to minimal (Daniel)
- screen_size is page size aligned because of it need mmap (Thomas)
- Adding fixes tag (Thomas)
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Fixes: aa15c677cc ("drm/fb-helper: Fix vertical damage clipping")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/dri-devel/ad44df29-3241-0d9e-e708-b0338bf3c623@189.cn/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420030500.1578756-1-suijingfeng@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0215ce9057 ]
[Why]
Block periods that are too short as they have the potential to
currently cause hangs in other firmware components on the system.
[How]
Update the threshold, mostly targeting a block of 4k and downscaling.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d893f39320 ("drm/amd/display: Lowering min Z8 residency time")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73dd4ca4b5 ]
[Why]
It's not supported in multi-display, but it is supported in 2nd eDP
screen only.
[How]
Remove multi display support, restrict number of planes for all
z-states support, but still allow Z8 if we're not using PWRSEQ0.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d893f39320 ("drm/amd/display: Lowering min Z8 residency time")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00812bfc7b ]
[Why]
It's currently tied to Z10 support, and is required for Z10, but
we can still support Z10 display off without PSR.
We currently need to skip the PSR CRTC disable to prevent stuttering
and underflow from occuring during PSR-SU.
[How]
Add a debug option to allow specifying this separately.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d893f39320 ("drm/amd/display: Lowering min Z8 residency time")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8067693680 ]
[Why]
Even if we block Z9 based on crossover threshold it's possible to
allow for Z8.
[How]
There's support for this on DCN314, so update the support types to
include a z8 only and z8_z10 only state.
Update the decide_zstate_support function to allow for specifying
these modes based on the Z8 threshold.
DCN31 has z-state disabled, but still update the legacy code to
map z8_only = disallow and z10_z8_only = z10_only to keep the support
the same.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d893f39320 ("drm/amd/display: Lowering min Z8 residency time")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d73b1d02de ]
If the hangcheck timer expires, check if the fw's position in the
cmdstream has advanced (changed) since last timer expiration, and
allow it up to three additional "extensions" to it's alotted time.
The intention is to continue to catch "shader stuck in a loop" type
hangs quickly, but allow more time for things that are actually
making forward progress.
Because we need to sample the CP state twice to detect if there has
not been progress, this also cuts the the timer's duration in half.
v2: Fix typo (REG_A6XX_CP_CSQ_IB2_STAT), add comment
v3: Only halve hangcheck timer duration for generations which
support progress detection (hdanton); removed unused a5xx
progress (without knowing how to adjust for data buffered
in ROQ it is too likely to report a false negative)
v4: Comment updates to better describe the total hangcheck
duration when progress detection is applied
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Tested-by: Chia-I Wu <olvaffe@gmail.com> # dEQP-GLES2.functional.flush_finish.wait
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511584/
Link: https://lore.kernel.org/r/20221114193049.1533391-3-robdclark@gmail.com
Stable-dep-of: ca090c837b ("drm/msm: fix missing wq allocation error handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3eeca5e5f3 upstream.
The adreno_load_gpu() path is guarded by an error check on
adreno_load_fw(). This function is responsible for loading
Qualcomm-only-signed binaries (e.g. SQE and GMU FW for A6XX), but it
does not take the vendor-signed ZAP blob into account.
By embedding the SQE (and GMU, if necessary) firmware into the
initrd/kernel, we can trigger and unfortunate path that would not bail
out early and proceed with gpu->hw_init(). That will fail, as the ZAP
loader path will not find the firmware and return back to
adreno_load_gpu().
This error path involves pm_runtime_put_sync() which then calls idle()
instead of suspend(). This is suboptimal, as it means that we're not
going through the clean shutdown sequence. With at least A619_holi, this
makes the GPU not wake up until it goes through at least one more
start-fail-stop cycle. The pm_runtime_put_sync that appears in the error
path actually does not guarantee that because of the earlier enabling of
runtime autosuspend.
Fix that by using pm_runtime_put_sync_suspend to force a clean shutdown.
Test cases:
1. All firmware baked into kernel
2. error loading ZAP fw in initrd -> load from rootfs at DE start
Both succeed on A619_holi (SM6375) and A630 (SDM845).
Fixes: 0d997f95b7 ("drm/msm/adreno: fix runtime PM imbalance at gpu load")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/530001/
Link: https://lore.kernel.org/r/20230330231517.2747024-1-konrad.dybcio@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2210af50ae upstream.
All microcode runs a basic validation after it's been loaded. Each
IP block as part of init will run both.
Introduce a wrapper for request_firmware and amdgpu_ucode_validate.
This wrapper will also remap any error codes from request_firmware
to -ENODEV. This is so that early_init will fail if firmware couldn't
be loaded instead of the IP block being disabled.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc42e76e7d upstream.
Add an early_init phase to MES for fetching and validating microcode
from the filesystem.
If MES microcode is required but not available during early init, the
firmware framebuffer will have already been released and the screen will
freeze.
Move the request for MES microcode into the early_init phase
so that if it's not available, early_init will fail.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6040517e4a upstream.
MES scheduler and kiq versions are stored in mes.sched_version and
mes.kiq_version, respectively, which are read from a register after
their queues are initialized. Remove mes.ucode_fw_version and
mes.data_fw_version which tried to read this versioning info from the
firmware headers (which don't contain this information).
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5247f05ead upstream.
Prevent further dpm casting on legacy asics without od_enabled in
amdgpu_dpm_is_overdrive_supported. This can avoid UBSAN complain
in init sequence.
v2: add a macro to check legacy dpm instead of checking asic family/type
v3: refine macro name for naming consistency
Suggested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
