The xilinx dma driver uses the consistent allocations, so for correct
operation also set the DMA mask for coherent APIs. It fixes the below
kernel crash with dmatest client when DMA IP is configured with 64-bit
address width and linux is booted from high (>4GB) memory.
Call trace:
[ 489.531257] dma_alloc_from_pool+0x8c/0x1c0
[ 489.535431] dma_direct_alloc+0x284/0x330
[ 489.539432] dma_alloc_attrs+0x80/0xf0
[ 489.543174] dma_pool_alloc+0x160/0x2c0
[ 489.547003] xilinx_cdma_prep_memcpy+0xa4/0x180
[ 489.551524] dmatest_func+0x3cc/0x114c
[ 489.555266] kthread+0x124/0x130
[ 489.558486] ret_from_fork+0x10/0x3c
[ 489.562051] ---[ end trace 248625b2d596a90a ]---
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Harini Katakam <harini.katakam@xilinx.com>
Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull floppy fix from Denis:
"Bring back O_NDELAY for floppy
Only one commit this time with revert of O_NDELAY removal for the floppy.
Users reported that the commit breaks userspace utils and known floppy
workflow patterns. We already reverted the same commit back in 2016
presumably for the same reason. Completely drop O_NDELAY for floppy seems
excessive to solve problems it introduces.
I started to write basic selftests for the floppy to prevent this kind of
userspace breaks in the future.
Signed-off-by: Denis Efremov <efremov@linux.com>"
* tag 'floppy-for-5.15' of https://github.com/evdenis/linux-floppy:
Revert "floppy: reintroduce O_NDELAY fix"
To reset mwifiex on Surface gen4+ (Pro 4 or later gen) devices, it
seems that putting the wifi device into D3cold is required according
to errata.inf file on Windows installation (Windows/INF/errata.inf).
This patch adds a function that performs power-cycle (put into D3cold
then D0) and call the function at the end of reset_prepare().
Note: Need to also reset the parent device (bridge) of wifi on SB1;
it might be because the bridge of wifi always reports it's in D3hot.
When I tried to reset only the wifi device (not touching parent), it gave
the following error and the reset failed:
acpi device:4b: Cannot transition to power state D0 for parent in D3hot
mwifiex_pcie 0000:03:00.0: can't change power state from D3cold to D0 (config space inaccessible)
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210820142050.35741-3-verdre@v0yd.nl
This commit adds the ability to apply device-specific quirks to the
mwifiex driver. It uses DMI matching similar to the quirks brcmfmac uses
with dmi.c. We'll add identifiers to match various MS Surface devices,
which this is primarily meant for, later.
This commit is a slightly modified version of a previous patch sent in
by Tsuchiya Yuto.
Co-developed-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210820142050.35741-2-verdre@v0yd.nl
When resuming from suspend, brcmf_pcie_pm_leave_D3 will first attempt a
hot resume and then fall back to removing the PCI device and then
reprobing. If this probe fails, the kernel will oops, because brcmf_err,
which is called to report the failure will dereference the stale bus
pointer. Open code and use the default bus-less brcmf_err to avoid this.
Fixes: 8602e62441 ("brcmfmac: pass bus to the __brcmf_err() in pcie.c")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210817063521.22450-1-a.fatoum@pengutronix.de
kmemleak reported that dev_name() of internally-handled cores were leaked
on driver unbinding. Let's use device_initialize() to take refcounts for
them and put_device() to properly free the related stuff.
While looking at it, there's another potential issue for those which should
be *registered* into driver core. If device_register() failed, we put
device once and freed bcma_device structures. In bcma_unregister_cores(),
they're treated as unregistered and we hit both UAF and double-free. That
smells not good and has also been fixed now.
Fixes: ab54bc8460 ("bcma: fill core details for every device")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210727025232.663-2-yuzenghui@huawei.com
Make sure that the PLL that feeds the CPU won't be stopped while the
kernel is running.
This fixes a problem on JZ4760 (and probably others) where under very
specific conditions, the main PLL would be turned OFF when the kernel
was shutting down, causing the shutdown process to fail.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
I think last commits in tag iwlwifi-next-for-kalle-2021-08-26 are not
ready yet so I'm skipping those and pulling an earlier commit. I
modified Luca's description below to not include the skipped commits.
iwlwifi patches for v5.15
* Support scanning hidden 6GHz networks;
* Some improvements in the FW error dumps;
* Add some HE capability flags
* A bunch of janitorial clean-ups;
* Clean-ups in the TX code;
* Small fix for SMPS;
* Support for a new hardware family (Bz);
* Small fix in the scan code;
* A bunch of changes in the D3 code, including new FW API;
* Finalize the refactoring of 6GHz scan;
* Initial changes in the SAR profile code;
* Fix reading one of our ACPI tables (WTAS);
* Support some new ACPI table revisions;
* Support new API of the WoWlan status FW notification;
* Fixes in SAR ACPI tables handling;
* Some debugging improvements;
* Fix in ROC;
* Support for new FW API versions;
* Support new FW command versions;
* Some other small fixes, clean-ups and improvements.
smp_processor_id()/raw* will be called once each when not
more queues in virtnet_xdp_get_sq() which is called in
non-preemptible context, so it's safe to call the function
smp_processor_id() once.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.
Some reasons why this API should be removed have been given by Julia
Lawall in [2].
A coccinelle script has been used to perform the needed transformation
Only relevant parts are given below.
It has been hand modified to use 'dma_set_mask_and_coherent()' instead of
'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable.
This is less verbose.
Finally, the now useless 'dma_mask' variable has been removed.
It has been compile tested.
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.
Some reasons why this API should be removed have been given by Julia
Lawall in [2].
A coccinelle script has been used to perform the needed transformation
Only relevant parts are given below.
It has been compile tested.
@@ @@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@ @@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.
Some reasons why this API should be removed have been given by Julia
Lawall in [2].
A coccinelle script has been used to perform the needed transformation
Only relevant parts are given below.
@@ @@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@ @@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@ @@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
NPC extraction profile marks layer types
NPC_LT_LB_CTAG for CTAG and NPC_LT_LB_STAG_QINQ for
STAG after parsing input packet. Those layer types
can be used to install ntuple filters using
vlan-etype option. Below are the commands and
corresponding behavior with this patch in place.
> alias nt "ethtool -U eth0 flow-type ether"
> nt vlan 5 m 0xf000 action 0
Input packets with outer VLAN id as 5 i.e,
stag packets with VLAN id 5 and ctag packets with
VLAN id as 5 are hit.
> nt vlan-etype 0x8100 action 0
All input ctag packets with any VLAN id are hit.
> nt vlan-etype 0x88A8 action 0
All input stag packets with any VLAN id are hit.
> nt vlan-etype 0x8100 vlan 5 m 0xf000 action 0
All input ctag packets with VLAN id 5 are hit.
> nt vlan-etype 0x88A8 vlan 5 m 0xf000 action 0
All input stag packets with VLAN id 5 are hit.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver crashes when restoring from the Hibernate. In the resume flow,
driver need to clean up the older nic/vec objects and re-initialize them.
Fixes: 8aaa112a57 ("net: atlantic: refactoring pm logic")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixed inconsistent license text across the RVU admin
function driver.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixed inconsistent license text across the netdev
drivers.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
queue
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2021-08-27
ravindhan Gunasekaran says:
This adds support for Credit-based shaper qdisc offload from
Traffic Control system. It enables traffic prioritization and
bandwidth reservation via the Credit-Based Shaper which is
implemented in hardware by i225 controller.
Patch 1/3 adds a default cycle-time for TSN mode to be configured.
Patch 2/3 helps to separate TSN mode programming on the fly and
during reset sequence. It also simplifies handling features flags
for various TSN modes supported by i225 in the driver.
Patch 3/3 adds support for IEEE802.1Qav(CBS) standard
implemented in i225 HW. Two sets of CBS HW shapers are present
in i225 and driver enables them in the two high priority queues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't populate the array fsm_state on the stack but instead it
static const. Makes the object code smaller by 154 bytes:
Before:
text data bss dec hex filename
9213 3904 0 13117 333d .../wireless/rsi/rsi_91x_debugfs.o
After:
text data bss dec hex filename
8995 3968 0 12963 32a3 .../wireless/rsi/rsi_91x_debugfs.o
(gcc version 10.3.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210819125018.8577-1-colin.king@canonical.com
For making user to switch back to the old playback mode, this patch
adds a new module option 'lowlatency' to snd-usb-audio driver.
When user face a regression due to the recent low-latency playback
support, they can test easily by passing lowlatency=0 option without
rebuilding the kernel.
Fixes: 307cc9baac ("ALSA: usb-audio: Reduce latency at playback start, take#2")
Link: https://lore.kernel.org/r/20210829073830.22686-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clang warns:
drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:901:6: warning:
variable 'place' is used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
if (chnl > 14) {
^~~~~~~~~
drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:909:9: note:
uninitialized use occurs here
return place;
^~~~~
drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:901:2: note: remove
the 'if' if its condition is always true
if (chnl > 14) {
^~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:899:10: note:
initialize the variable 'place' to silence this warning
u8 place;
^
= '\0'
1 warning generated.
Commit 369956ae57 ("rtlwifi: rtl8192de: Remove redundant variable
initializations") removed the initialization of place but it appears
that this removal was in the wrong function.
_rtl92c_phy_get_rightchnlplace() returns place's value at the end of the
function so now if the if statement is false, place never gets
initialized. Add that initialization back to address the warning.
place's initialization is not necessary in
rtl92d_get_rightchnlplace_for_iqk() as place is only used within the if
statement so it can be removed, which is likely what was intended in the
first place.
Fixes: 369956ae57 ("rtlwifi: rtl8192de: Remove redundant variable initializations")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210823222014.764557-1-nathan@kernel.org
This error path is unlikely because of it checked for NULL and
returned -ENOMEM earlier in the function. But it should return
an error code here as well if we ever do hit it because of a
race condition or something.
Fixes: bdcd817079 ("Add ath6kl cleaned up driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210813113438.GB30697@kili
The problem is that gpio_free() can sleep and the cfg_soc() can be
called with spinlocks held. One problematic call tree is:
--> ath_reset_internal() takes &sc->sc_pcu_lock spin lock
--> ath9k_hw_reset()
--> ath9k_hw_gpio_request_in()
--> ath9k_hw_gpio_request()
--> ath9k_hw_gpio_cfg_soc()
Remove gpio_free(), use error message instead, so we should make sure
there is no GPIO conflict.
Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(),
as gpio_mask will never be set for SOC chips.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1628481916-15030-1-git-send-email-miaoqing@codeaurora.org
Bad header can have large length field which can cause OOB.
cptr is the last bytes for read, and the eeprom is parsed
from high to low address. The OOB, triggered by the condition
length > cptr could cause memory error with a read on
negative index.
There are some sanity check around length, but it is not
compared with cptr (the remaining bytes). Here, the
corrupted/bad EEPROM can cause panic.
I was able to reproduce the crash, but I cannot find the
log and the reproducer now. After I applied the patch, the
bug is no longer reproducible.
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home
The WLAN NV firmware blob differs between platforms, and possibly
devices, so add support in the wcn36xx driver for reading the path of
this file from DT in order to allow these files to live in a generic
file system (or linux-firmware).
For some reason the parent (wcnss_ctrl) also needs to upload this blob,
so rather than specifying the same information in both nodes wcn36xx
reads the string from the parent's of_node.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Aníbal Limón <anibal.limon@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210824171225.686683-1-bjorn.andersson@linaro.org
