[ Upstream commit 942bcd33ed ]
IPQ8074 PCIe PHY nodes are broken in the many ways:
- '#address-cells', '#size-cells' and 'ranges' are missing.
- Child phy/lane node is missing, and the child properties like
'#phy-cells' and 'clocks' are mistakenly put into parent node.
- The clocks properties for parent node are missing.
Fix them to get the nodes comply with the bindings schema.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-9-shawn.guo@linaro.org
Stable-dep-of: 7ba33591b4 ("arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 877cff3568 ]
It seems that clock-output-names for the USB3 QMP PHY-s where set without
actually checking what is the GCC clock driver expecting, so clock core
could never actually find the parents for usb0_pipe_clk_src and
usb1_pipe_clk_src clocks in the GCC driver.
So, correct the names to be what the driver expects so that parenting
works.
Before:
gcc_usb0_pipe_clk_src 0 0 0 125000000 0 0 50000 Y
gcc_usb1_pipe_clk_src 0 0 0 125000000 0 0 50000 Y
After:
usb3phy_0_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y
usb0_pipe_clk_src 1 1 0 125000000 0 0 50000 Y
gcc_usb0_pipe_clk 1 1 0 125000000 0 0 50000 Y
usb3phy_1_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y
usb1_pipe_clk_src 1 1 0 125000000 0 0 50000 Y
gcc_usb1_pipe_clk 1 1 0 125000000 0 0 50000 Y
Fixes: 5e09bc51d0 ("arm64: dts: ipq8074: enable USB support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230108130440.670181-2-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce8a06b5ba ]
The systimer block derives its 13 MHz clock by dividing the main 26 MHz
oscillator clock by 2 internally, not through the TOPCKGEN clock
controller.
On the MT8183 this divider is set either by power-on-reset or by the
bootloader. The bootloader may then make the divider unconfigurable to,
but can be read out by, the operating system.
Making the systimer block take the 26 MHz clock directly requires
changing the implementations. As an ABI compatible fix, change the
input clock of the systimer block a fixed factor divide-by-2 clock
that takes the 26 MHz oscillator as its input.
Fixes: 5bc8e2875f ("arm64: dts: mt8183: add systimer0 device node")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221201084229.3464449-2-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8416262b0e ]
Reorder the clocks and corresponding names to match the QUSB2 phy
schema, fixing the following CHECK_DTBS errors:
arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dtb: phy@1613000: clock-names:0: 'cfg_ahb' was expected
From schema: /newdata/aosp-r/kernel/mainline/kernel/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dtb: phy@1613000: clock-names:1: 'ref' was expected
From schema: /newdata/aosp-r/kernel/mainline/kernel/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
Fixes: cff4bbaf2a ("arm64: dts: qcom: Add support for SM6125")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216213343.1140143-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be8de06dc3 ]
The framebuffer configuration for kumano griffin, written in kumano dtsi
(which is overwritten in bahamut dts for its smaller panel) has to use a
1096x2560 configuration as this is what the panel (and framebuffer area)
has been initialized to. Downstream userspace also has access to (and
uses) this 2.5k mode by default, and only switches the panel to 4k when
requested.
Fixes: d0a6ce59ea ("arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209191733.1458031-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d78c8e3289 upstream.
Clang warns:
arch/powerpc/mm/book3s64/radix_tlb.c:1191:23: error: variable 'hstart' is uninitialized when used here
__tlbiel_va_range(hstart, hend, pid,
^~~~~~
arch/powerpc/mm/book3s64/radix_tlb.c:1191:31: error: variable 'hend' is uninitialized when used here
__tlbiel_va_range(hstart, hend, pid,
^~~~
Rework the 'if (IS_ENABLE(CONFIG_TRANSPARENT_HUGEPAGE))' so hstart/hend
is always initialized to silence the warnings. That will also simplify
the 'else' path. Clang is getting confused with these warnings, but the
warnings is a false-positive.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220810114318.3220630-1-anders.roxell@linaro.org
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can't use 0 here, as io_init_req() is always invoked with the
ctx uring_lock held. Newer kernels have IO_URING_F_UNLOCKED for this,
but previously we used IO_URING_F_NONBLOCK to indicate this as well.
Fixes: cf7f9cd500 ("io_uring: add missing lock in io_get_file_fixed")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
io_get_file_fixed will access io_uring's context. Lock it if it is
invoked unlocked (eg via io-wq) to avoid a race condition with fixed
files getting unregistered.
No single upstream patch exists for this issue, it was fixed as part
of the file assignment changes that went into the 5.18 cycle.
Signed-off-by: Jheng, Bing-Jhong Billy <billy@starlabs.sg>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45bf39f8df upstream.
Ever since commit 83e83ecb79 ("usb: core: get config and string
descriptors for unauthorized devices") was merged in 2013, there has
been no mechanism for reallocating the rawdescriptors buffers in
struct usb_device after the initial enumeration. Before that commit,
the buffers would be deallocated when a device was deauthorized and
reallocated when it was authorized and enumerated.
This means that the locking in the read_descriptors() routine is not
needed, since the buffers it reads will never be reallocated while the
routine is running. This locking can interfere with user programs
trying to read a hub's descriptors via sysfs while new child devices
of the hub are being initialized, since the hub is locked during this
procedure.
Since the locking in read_descriptors() hasn't been needed for over
nine years, we can remove it.
Reported-and-tested-by: Troels Liebe Bentsen <troels@connectedcars.dk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/Y9l+wDTRbuZABzsE@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7394d2ebb6 upstream.
When COMPILED_SOURCE is set, running
make ARCH=x86_64 COMPILED_SOURCE=1 cscope tags
could throw the following errors:
scripts/tags.sh: line 98: /usr/bin/realpath: Argument list too long
cscope: no source files found
scripts/tags.sh: line 98: /usr/bin/realpath: Argument list too long
ctags: No files specified. Try "ctags --help".
This is most likely to happen when the kernel is configured to build a
large number of modules, which has the consequence of passing too many
arguments when calling 'realpath' in 'all_compiled_sources()'.
Let's improve this by invoking 'realpath' through 'xargs', which takes
care of properly limiting the argument list.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20220516234646.531208-1-cristian.ciocaltea@collabora.com
Cc: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae3419fbac upstream.
Commit 226fae124b ("vc_screen: move load of struct vc_data pointer in
vcs_read() to avoid UAF") moved the call to vcs_vc() into the loop.
While doing this it also moved the unconditional assignment of
ret = -ENXIO;
This unconditional assignment was valid outside the loop but within it
it clobbers the actual value of ret.
To avoid this only assign "ret = -ENXIO" when actually needed.
[ Also, the 'goto unlock_out" needs to be just a "break", so that it
does the right thing when it exits on later iterations when partial
success has happened - Linus ]
Reported-by: Storm Dragon <stormdragon2976@gmail.com>
Link: https://lore.kernel.org/lkml/Y%2FKS6vdql2pIsCiI@hotmail.com/
Fixes: 226fae124b ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/64981d94-d00c-4b31-9063-43ad0a384bde@t-8ch.de/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1fe4850b34 upstream.
The bpf_fib_lookup() helper does not only look up the fib (ie. route)
but it also looks up the neigh. Before returning the neigh, the helper
does not check for NUD_VALID. When a neigh state (neigh->nud_state)
is in NUD_FAILED, its dmac (neigh->ha) could be all zeros. The helper
still returns SUCCESS instead of NO_NEIGH in this case. Because of the
SUCCESS return value, the bpf prog directly uses the returned dmac
and ends up filling all zero in the eth header.
This patch checks for NUD_VALID and returns NO_NEIGH if the neigh is
not valid.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217004150.2980689-3-martin.lau@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ea427a222d ]
The initial value of hid->collection[].parent_idx if 0. When
Report descriptor doesn't contain "HID Collection", the value
remains as 0.
In the meanwhile, when the Report descriptor fullfill
all following conditions, it will trigger hid_apply_multiplier
function call.
1. Usage page is Generic Desktop Ctrls (0x01)
2. Usage is RESOLUTION_MULTIPLIER (0x48)
3. Contain any FEATURE items
The while loop in hid_apply_multiplier will search the top-most
collection by searching parent_idx == -1. Because all parent_idx
is 0. The loop will run forever.
There is a Report Descriptor triggerring the deadloop
0x05, 0x01, // Usage Page (Generic Desktop Ctrls)
0x09, 0x48, // Usage (0x48)
0x95, 0x01, // Report Count (1)
0x75, 0x08, // Report Size (8)
0xB1, 0x01, // Feature
Signed-off-by: Xin Zhao <xnzhao@google.com>
Link: https://lore.kernel.org/r/20230130212947.1315941-1-xnzhao@google.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1d2ecdf5e ]
Entries can linger in cache without timer for days, thanks to
the gc_thresh1 limit. As result, without traffic, the confirmed
time can be outdated and to appear to be in the future. Later,
on traffic, NUD_STALE entries can switch to NUD_DELAY and start
the timer which can see the invalid confirmed time and wrongly
switch to NUD_REACHABLE state instead of NUD_PROBE. As result,
timer is set many days in the future. This is more visible on
32-bit platforms, with higher HZ value.
Why this is a problem? While we expect unused entries to expire,
such entries stay in REACHABLE state for too long, locked in
cache. They are not expired normally, only when cache is full.
Problem and the wrong state change reported by Zhang Changzhong:
172.16.1.18 dev bond0 lladdr 0a:0e:0f:01:12:01 ref 1 used 350521/15994171/350520 probes 4 REACHABLE
350520 seconds have elapsed since this entry was last updated, but it is
still in the REACHABLE state (base_reachable_time_ms is 30000),
preventing lladdr from being updated through probe.
Fix it by ensuring timer is started with valid used/confirmed
times. Considering the valid time range is LONG_MAX jiffies,
we try not to go too much in the past while we are in
DELAY/PROBE state. There are also places that need
used/updated times to be validated while timer is not running.
Reported-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Tested-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33e17b3f5a ]
The arg->clone_sources_count is u64 and can trigger a warning when a
huge value is passed from user space and a huge array is allocated.
Limit the allocated memory to 8MiB (can be increased if needed), which
in turn limits the number of clone sources to 8M / sizeof(struct
clone_root) = 8M / 40 = 209715. Real world number of clones is from
tens to hundreds, so this is future proof.
Reported-by: syzbot+4376a9a073770c173269@syzkaller.appspotmail.com
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb6df4366f ]
Lockdep reports that acpi_nfit_shutdown() may deadlock against an
opportune acpi_nfit_scrub(). acpi_nfit_scrub () is run from inside a
'work' and therefore has already acquired workqueue-internal locks. It
also acquiires acpi_desc->init_mutex. acpi_nfit_shutdown() first
acquires init_mutex, and was subsequently attempting to cancel any
pending workqueue items. This reversed locking order causes a potential
deadlock:
======================================================
WARNING: possible circular locking dependency detected
6.2.0-rc3 #116 Tainted: G O N
------------------------------------------------------
libndctl/1958 is trying to acquire lock:
ffff888129b461c0 ((work_completion)(&(&acpi_desc->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0x43/0x450
but task is already holding lock:
ffff888129b460e8 (&acpi_desc->init_mutex){+.+.}-{3:3}, at: acpi_nfit_shutdown+0x87/0xd0 [nfit]
which lock already depends on the new lock.
...
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&acpi_desc->init_mutex);
lock((work_completion)(&(&acpi_desc->dwork)->work));
lock(&acpi_desc->init_mutex);
lock((work_completion)(&(&acpi_desc->dwork)->work));
*** DEADLOCK ***
Since the workqueue manipulation is protected by its own internal locking,
the cancellation of pending work doesn't need to be done under
acpi_desc->init_mutex. Move cancel_delayed_work_sync() outside the
init_mutex to fix the deadlock. Any work that starts after
acpi_nfit_shutdown() drops the lock will see ARS_CANCEL, and the
cancel_delayed_work_sync() will safely flush it out.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20230112-acpi_nfit_lockdep-v1-1-660be4dd10be@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29f316a1d7 ]
Make function buttons on ELECOM M-HT1DRBK trackball mouse work. This model
has two devices with different device IDs (010D and 011C). Both of
them misreports the number of buttons as 5 in the report descriptor, even
though they have 8 buttons. hid-elecom overwrites the report to fix them,
but supports only on 010D and does not work on 011C. This patch fixes
011C in the similar way but with specialized position parameters.
In fact, it is sufficient to rewrite only 17th byte (05 -> 08). However I
followed the existing way.
Signed-off-by: Takahiro Fujii <fujii@xaxxi.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0355dbbf1 ]
This change adds support for nested IPsec tunnels by ensuring that
XFRM-I verifies existing policies before decapsulating a subsequent
policies. Addtionally, this clears the secpath entries after policies
are verified, ensuring that previous tunnels with no-longer-valid
do not pollute subsequent policy checks.
This is necessary especially for nested tunnels, as the IP addresses,
protocol and ports may all change, thus not matching the previous
policies. In order to ensure that packets match the relevant inbound
templates, the xfrm_policy_check should be done before handing off to
the inner XFRM protocol to decrypt and decapsulate.
Notably, raw ESP/AH packets did not perform policy checks inherently,
whereas all other encapsulated packets (UDP, TCP encapsulated) do policy
checks after calling xfrm_input handling in the respective encapsulation
layer.
Test: Verified with additional Android Kernel Unit tests
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e55f0f5bef ]
The same pre-work code is used before each call to
ionic_rx_fill(), so bring it in and make it a part of
the routine.
Signed-off-by: Neel Patel <neel@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
