Changes in 4.9.89
blkcg: fix double free of new_blkg in blkcg_init_queue
Input: tsc2007 - check for presence and power down tsc2007 during probe
perf stat: Issue a HW watchdog disable hint
staging: speakup: Replace BUG_ON() with WARN_ON().
staging: wilc1000: add check for kmalloc allocation failure.
HID: reject input outside logical range only if null state is set
drm: qxl: Don't alloc fbdev if emulation is not supported
ARM: dts: r8a7791: Remove unit-address and reg from integrated cache
ARM: dts: r8a7792: Remove unit-address and reg from integrated cache
ARM: dts: r8a7793: Remove unit-address and reg from integrated cache
ARM: dts: r8a7794: Remove unit-address and reg from integrated cache
arm64: dts: r8a7796: Remove unit-address and reg from integrated cache
drm/sun4i: Fix up error path cleanup for master bind function
drm/sun4i: Set drm_crtc.port to the underlying TCON's output port node
ath10k: fix a warning during channel switch with multiple vaps
drm/sun4i: Fix TCON clock and regmap initialization sequence
PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()
selinux: check for address length in selinux_socket_bind()
x86/mm: Make mmap(MAP_32BIT) work correctly
perf sort: Fix segfault with basic block 'cycles' sort dimension
x86/mce: Handle broadcasted MCE gracefully with kexec
eventpoll.h: fix epoll event masks
i40e: Acquire NVM lock before reads on all devices
i40e: fix ethtool to get EEPROM data from X722 interface
perf tools: Make perf_event__synthesize_mmap_events() scale
ARM: brcmstb: Enable ZONE_DMA for non 64-bit capable peripherals
drivers: net: xgene: Fix hardware checksum setting
drivers: net: phy: xgene: Fix mdio write
drivers: net: xgene: Fix wrong logical operation
drivers: net: xgene: Fix Rx checksum validation logic
drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)
ath10k: disallow DFS simulation if DFS channel is not enabled
ath10k: fix fetching channel during potential radar detection
usb: misc: lvs: fix race condition in disconnect handling
ARM: bcm2835: Enable missing CMA settings for VC4 driver
net: ethernet: bgmac: Allow MAC address to be specified in DTB
netem: apply correct delay when rate throttling
x86/mce: Init some CPU features early
omapfb: dss: Handle return errors in dss_init_ports()
perf probe: Fix concat_probe_trace_events
perf probe: Return errno when not hitting any event
HID: clamp input to logical range if no null state
net/8021q: create device with all possible features in wanted_features
ARM: dts: Adjust moxart IRQ controller and flags
qed: Always publish VF link from leading hwfn
s390/topology: fix typo in early topology code
zd1211rw: fix NULL-deref at probe
batman-adv: handle race condition for claims between gateways
of: fix of_device_get_modalias returned length when truncating buffers
solo6x10: release vb2 buffers in solo_stop_streaming()
x86/boot/32: Defer resyncing initial_page_table until per-cpu is set up
scsi: fnic: Fix for "Number of Active IOs" in fnicstats becoming negative
scsi: ipr: Fix missed EH wakeup
media: i2c/soc_camera: fix ov6650 sensor getting wrong clock
timers, sched_clock: Update timeout for clock wrap
sysrq: Reset the watchdog timers while displaying high-resolution timers
Input: qt1070 - add OF device ID table
sched: act_csum: don't mangle TCP and UDP GSO packets
PCI: hv: Properly handle PCI bus remove
PCI: hv: Lock PCI bus on device eject
ASoC: rcar: ssi: don't set SSICR.CKDV = 000 with SSIWSR.CONT
spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer
tcp: sysctl: Fix a race to avoid unexpected 0 window from space
dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped
usb: dwc3: make sure UX_EXIT_PX is cleared
ARM: dts: bcm2835: add index to the ethernet alias
perf annotate: Fix a bug following symbolic link of a build-id file
perf buildid: Do not assume that readlink() returns a null terminated string
i40e/i40evf: Fix use after free in Rx cleanup path
scsi: be2iscsi: Check tag in beiscsi_mccq_compl_wait
driver: (adm1275) set the m,b and R coefficients correctly for power
bonding: make speed, duplex setting consistent with link state
mm: Fix false-positive VM_BUG_ON() in page_cache_{get,add}_speculative()
ALSA: firewire-lib: add a quirk of packet without valid EOH in CIP format
ARM: dts: r8a7794: Add DU1 clock to device tree
ARM: dts: r8a7794: Correct clock of DU1
ARM: dts: silk: Correct clock of DU1
blk-throttle: make sure expire time isn't too big
regulator: core: Limit propagation of parent voltage count and list
perf trace: Handle unpaired raw_syscalls:sys_exit event
f2fs: relax node version check for victim data in gc
drm/ttm: never add BO that failed to validate to the LRU list
bonding: refine bond_fold_stats() wrap detection
PCI: Apply Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
powerpc/mm/hugetlb: Filter out hugepage size not supported by page table layout
braille-console: Fix value returned by _braille_console_setup
drm/vmwgfx: Fixes to vmwgfx_fb
vxlan: vxlan dev should inherit lowerdev's gso_max_size
NFC: nfcmrvl: Include unaligned.h instead of access_ok.h
NFC: nfcmrvl: double free on error path
NFC: pn533: change order of free_irq and dev unregistration
ARM: dts: r7s72100: fix ethernet clock parent
ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks
ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks
ARM: dts: r8a7793: Correct parent of SSI[0-9] clocks
powerpc: Avoid taking a data miss on every userspace instruction miss
net: hns: Correct HNS RSS key set function
net/faraday: Add missing include of of.h
qed: Fix TM block ILT allocation
rtmutex: Fix PI chain order integrity
printk: Correctly handle preemption in console_unlock()
drm: rcar-du: Handle event when disabling CRTCs
ARM: dts: koelsch: Correct clock frequency of X2 DU clock input
reiserfs: Make cancel_old_flush() reliable
ASoC: rt5677: Add OF device ID table
IB/hfi1: Check for QSFP presence before attempting reads
ALSA: firewire-digi00x: add support for console models of Digi00x series
ALSA: firewire-digi00x: handle all MIDI messages on streaming packets
fm10k: correctly check if interface is removed
EDAC, altera: Fix peripheral warnings for Cyclone5
scsi: ses: don't get power status of SES device slot on probe
qed: Correct MSI-x for storage
apparmor: Make path_max parameter readonly
iommu/iova: Fix underflow bug in __alloc_and_insert_iova_range
kvm/svm: Setup MCG_CAP on AMD properly
kvm: nVMX: Disallow userspace-injected exceptions in guest mode
video: ARM CLCD: fix dma allocation size
drm/radeon: Fail fb creation from imported dma-bufs.
drm/amdgpu: Fail fb creation from imported dma-bufs. (v2)
drm/rockchip: vop: Enable pm domain before vop_initial
i40e: only register client on iWarp-capable devices
coresight: Fixes coresight DT parse to get correct output port ID.
lkdtm: turn off kcov for lkdtm_rodata_do_nothing:
tty: amba-pl011: Fix spurious TX interrupts
serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off
MIPS: BPF: Quit clobbering callee saved registers in JIT code.
MIPS: BPF: Fix multiple problems in JIT skb access helpers.
MIPS: r2-on-r6-emu: Fix BLEZL and BGTZL identification
MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters
v4l: vsp1: Prevent multiple streamon race commencing pipeline early
v4l: vsp1: Register pipe with output WPF
regulator: isl9305: fix array size
md/raid6: Fix anomily when recovering a single device in RAID6.
md.c:didn't unlock the mddev before return EINVAL in array_size_store
powerpc/nohash: Fix use of mmu_has_feature() in setup_initial_memory_limit()
usb: dwc2: Make sure we disconnect the gadget state
usb: gadget: dummy_hcd: Fix wrong power status bit clear/reset in dummy_hub_control()
perf evsel: Return exact sub event which failed with EPERM for wildcards
iwlwifi: mvm: fix RX SKB header size and align it properly
drivers/perf: arm_pmu: handle no platform_device
perf inject: Copy events when reordering events in pipe mode
net: fec: add phy-reset-gpios PROBE_DEFER check
perf session: Don't rely on evlist in pipe mode
vfio/powerpc/spapr_tce: Enforce IOMMU type compatibility check
vfio/spapr_tce: Check kzalloc() return when preregistering memory
scsi: sg: check for valid direction before starting the request
scsi: sg: close race condition in sg_remove_sfp_usercontext()
ALSA: hda: Add Geminilake id to SKL_PLUS
kprobes/x86: Fix kprobe-booster not to boost far call instructions
kprobes/x86: Set kprobes pages read-only
pwm: tegra: Increase precision in PWM rate calculation
clk: qcom: msm8996: Fix the vfe1 powerdomain name
Bluetooth: Avoid bt_accept_unlink() double unlinking
Bluetooth: 6lowpan: fix delay work init in add_peer_chan()
mac80211_hwsim: use per-interface power level
ath10k: fix compile time sanity check for CE4 buffer size
wil6210: fix protection against connections during reset
wil6210: fix memory access violation in wil_memcpy_from/toio_32
perf stat: Fix bug in handling events in error state
mwifiex: Fix invalid port issue
drm/edid: set ELD connector type in drm_edid_to_eld()
video/hdmi: Allow "empty" HDMI infoframes
HID: elo: clear BTN_LEFT mapping
iwlwifi: mvm: rs: don't override the rate history in the search cycle
clk: meson: gxbb: fix wrong clock for SARADC/SANA
ARM: dts: exynos: Correct Trats2 panel reset line
sched: Stop switched_to_rt() from sending IPIs to offline CPUs
sched: Stop resched_cpu() from sending IPIs to offline CPUs
test_firmware: fix setting old custom fw path back on exit
net: ieee802154: adf7242: Fix bug if defined DEBUG
net: xfrm: allow clearing socket xfrm policies.
mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()
net: thunderx: Set max queue count taking XDP_TX into account
ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin
ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
mtd: nand: ifc: update bufnum mask for ver >= 2.0.0
userns: Don't fail follow_automount based on s_user_ns
leds: pm8058: Silence pointer to integer size warning
power: supply: ab8500_charger: Fix an error handling path
power: supply: ab8500_charger: Bail out in case of error in 'ab8500_charger_init_hw_registers()'
ath10k: update tdls teardown state to target
scsi: ses: don't ask for diagnostic pages repeatedly during probe
pwm: stmpe: Fix wrong register offset for hwpwm=2 case
clk: qcom: msm8916: fix mnd_width for codec_digcodec
mwifiex: cfg80211: do not change virtual interface during scan processing
ath10k: fix invalid STS_CAP_OFFSET_MASK
tools/usbip: fixes build with musl libc toolchain
spi: sun6i: disable/unprepare clocks on remove
bnxt_en: Don't print "Link speed -1 no longer supported" messages.
scsi: core: scsi_get_device_flags_keyed(): Always return device flags
scsi: devinfo: apply to HP XP the same flags as Hitachi VSP
scsi: dh: add new rdac devices
media: vsp1: Prevent suspending and resuming DRM pipelines
media: cpia2: Fix a couple off by one bugs
veth: set peer GSO values
drm/amdkfd: Fix memory leaks in kfd topology
powerpc/modules: Don't try to restore r2 after a sibling call
agp/intel: Flush all chipset writes after updating the GGTT
mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED
mac80211: remove BUG() when interface type is invalid
ASoC: nuc900: Fix a loop timeout test
ipvlan: add L2 check for packets arriving via virtual devices
rcutorture/configinit: Fix build directory error message
locking/locktorture: Fix num reader/writer corner cases
ima: relax requiring a file signature for new files with zero length
net: hns: Some checkpatch.pl script & warning fixes
x86/boot/32: Fix UP boot on Quark and possibly other platforms
x86/cpufeatures: Add Intel PCONFIG cpufeature
selftests/x86/entry_from_vm86: Exit with 1 if we fail
selftests/x86: Add tests for User-Mode Instruction Prevention
selftests/x86: Add tests for the STR and SLDT instructions
selftests/x86/entry_from_vm86: Add test cases for POPF
x86/vm86/32: Fix POPF emulation
x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels
x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist
x86/mm: Fix vmalloc_fault to use pXd_large
parisc: Handle case where flush_cache_range is called with no context
ALSA: pcm: Fix UAF in snd_pcm_oss_get_formats()
ALSA: hda - Revert power_save option default value
ALSA: seq: Fix possible UAF in snd_seq_check_queue()
ALSA: seq: Clear client entry before deleting else at closing
drm/amdgpu: fix prime teardown order
drm/amdgpu/dce: Don't turn off DP sink when disconnected
fs: Teach path_connected to handle nfs filesystems with multiple roots.
lock_parent() needs to recheck if dentry got __dentry_kill'ed under it
fs/aio: Add explicit RCU grace period when freeing kioctx
fs/aio: Use RCU accessors for kioctx_table->table[]
irqchip/gic-v3-its: Ensure nr_ites >= nr_lpis
scsi: sg: fix SG_DXFER_FROM_DEV transfers
scsi: sg: fix static checker warning in sg_is_valid_dxfer
scsi: sg: only check for dxfer_len greater than 256M
btrfs: alloc_chunk: fix DUP stripe size handling
btrfs: Fix use-after-free when cleaning up fs_devs with a single stale device
scsi: qla2xxx: Fix extraneous ref on sp's after adapter break
USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
usb: dwc3: Fix GDBGFIFOSPACE_TYPE values
usb: gadget: bdc: 64-bit pointer capability check
Linux 4.9.89
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 7064dc7fc1 ]
I ran into a link error on ARM64 for lkdtm_rodata_do_nothing:
drivers/misc/built-in.o: In function `lkdtm_rodata_do_nothing':
:(.rodata+0x68c8): relocation truncated to fit: R_AARCH64_CALL26 against symbol `__sanitizer_cov_trace_pc' defined in .text section in kernel/built-in.o
I did not analyze this further, but my theory is that we would need a trampoline
to call __sanitizer_cov_trace_pc(), but the linker (correctly) only adds trampolines
for callers in executable sections.
Disabling KCOV for this one file avoids the build failure with no
other practical downsides I can think of.
The problem can only happen on kernels that contain both kcov and
lkdtm, so if we want to backport this, it should be in the earliest
version that has both (v4.8).
Fixes: 5c9a8750a6 ("kernel: add kcov code coverage")
Fixes: 9a49a528dc ("lkdtm: add function for testing .rodata section")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Disable LTO for lkdtm_rodata.o to allow objcopy to be used to
manipulate sections.
Bug: 62093296
Bug: 67506682
Change-Id: Iedd1a3a2a9b06f44e7ceb6ac287ea764eaf5ef0a
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This module tracks cputime and io stats.
Signed-off-by: Jin Qian <jinqian@google.com>
Bug: 34198239
Change-Id: I9ee7d9e915431e0bb714b36b5a2282e1fdcc7342
New driver memory_state_time tracks time spent in different DDR
frequency and bandwidth states.
Memory drivers such as qcom,cpubw can post updated state to the driver
after registering a callback. Processed by a workqueue
Bandwidth buckets are read in from device tree in the relevant qualcomm
section, can be defined in any quantity and spacing.
The data is exposed at /sys/kernel/memory_state_time, able to be read by
the Android framework.
Functionality is behind a config option CONFIG_MEMORY_STATE_TIME
Change-Id: I4fee165571cb975fb9eacbc9aada5e6d7dd748f0
Signed-off-by: James Carr <carrja@google.com>
Adds proc files /proc/uid_cputime/show_uid_stat and
/proc/uid_cputime/remove_uid_range.
show_uid_stat lists the total utime and stime for the active as well as
terminated processes for each of the uids.
Writing a range of uids to remove_uid_range will delete the accounting
for all the uids within that range.
Change-Id: I21d9210379da730b33ddc1a0ea663c8c9d2ac15b
Patches merged to the IIO BMP085 driver makes it fully compliant
with all features found in this old misc driver. Retire this old
driver in favor of the new one in the proper subsystem.
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Marek Belisko <marek@goldelico.com>
Acked-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Rohm BH1780 ambient light sensor has a new driver with extended
functionality (proper runtime PM) in the appropriate framework IIO,
it can be found at:
drivers/iio/light/bh1780.c
The MISC driver symbol CONFIG_SENSORS_BH1780 does not appear in any
defconfigs, so it should safe to delete.
Cc: Hemanth V <hemanthv@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The targets for lkdtm's objcopy were missing which caused them to always
be rebuilt. This corrects the problem.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
This splits all the remaining tests from lkdtm_core.c into the new
lkdtm_bugs.c file to help separate things better for readability.
Signed-off-by: Kees Cook <keescook@chromium.org>
This splits the *_AFTER_FREE and related tests into the new lkdtm_heap.c
file to help separate things better for readability.
Signed-off-by: Kees Cook <keescook@chromium.org>
This splits the EXEC_*, WRITE_* and related tests into the new lkdtm_perms.c
file to help separate things better for readability.
Signed-off-by: Kees Cook <keescook@chromium.org>
This splits the USERCOPY_* tests into the new lkdtm_usercopy.c file to
help separate things better for readability.
Signed-off-by: Kees Cook <keescook@chromium.org>
This adds a function that lives in the .rodata section. The section
flags are corrected using objcopy since there is no way with gcc to
declare section flags in an architecture-agnostic way.
Signed-off-by: Kees Cook <keescook@chromium.org>
Kbuild lacks a way to do in-place objcopy or other modifications of
built targets, so in order to move functions into non-text sections
without renaming the kernel module, the build of lkdtm must be split
into separate source files. This renames lkdtm.c to lkdtm_core.c in
preparation for adding the source file for the .rodata section.
Signed-off-by: Kees Cook <keescook@chromium.org>
This driver is used to configure the coincell charger found in
Qualcomm PMICs.
The driver allows configuring the current-limiting resistor for
the charger, as well as the voltage to apply to the coincell
(or capacitor) when charging.
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CARMA project has ended, and the hardware has all been moved into
storage. It is unlikely to ever be used again.
Remove the drivers so that there is no more maintenance burden from
ongoing upstream kernel changes.
Signed-off-by: Ira W. Snyder <ira.snyder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds the base cxl support that cannot be built as a module. Specifically
it adds the cxl callbacks that are called from the core powerpc mm code which
must always exist irrespective of if the cxl module is loaded or not. This is
similar to how cell works with CONFIG_SPU_BASE.
This adds a cxl_slbia() call (similar to spu_flush_all_slbs()) which checks if
the cxl module is loaded and in use, returning immediately if it is not. If it
is in use it calls into the cxl SLB invalidation code.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch - finally, after over 6 months! :-( - addresses
Samuel's request to split the vexpress-sysreg driver into
smaller portions and define the device in a form of MFD
cells:
* LEDs code has been completely removed and replaced with
"gpio-leds" nodes in the tree (referencing dedicated
GPIO subnodes in sysreg - bindings documentation updated);
this also better fits the reality as some variants of the
motherboard don't have all the LEDs populated
* syscfg bridge code has been extracted into a separate
driver (placed in drivers/misc for no better place)
* all the ID & MISC registers are defined as sysconf
making them available for other drivers should they need
to use them (and also to the user via /sys/kernel/debug/regmap
which can be helpful in platform debugging)
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
The code is clean, there are users of it, so it doesn't belong in
staging anymore, move it to drivers/misc/.
Cc: Steve Underwood <steveu@coppice.org>
Cc: David Rowe <david@rowetel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull pwm changes from Thierry Reding:
"Mostly bug fixes and clean up. There is a new driver, which is
actually moving a custom PWM driver from drivers/misc.
The majority of the patches are enhancements to the device tree
support in the pwm-backlight driver. Backlights can now additionally
be powered using a regulator and enabled using a GPIO in addition to
just the PWM input"
* tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits)
Documentation/pwm: Update supported SoC name for pwm-samsung
pwm: samsung: Fix kernel warning while unexporting a channel
MAINTAINERS: Move PWM subsystem tree to kernel.org
Documentation/pwm: Fix trivial typos
pwm-backlight: Remove unused variable
pwm_backlight: avoid short blank screen while doing hibernation
pwm-backlight: Fix brightness adjustment
pwm: add ep93xx PWM support
pwm-backlight: Allow for non-increasing brightness levels
pwm-backlight: Add power supply support
pwm-backlight: Use new enable_gpio field
unicore32: Initialize PWM backlight enable_gpio field
ARM: shmobile: Initialize PWM backlight enable_gpio field
ARM: SAMSUNG: Initialize PWM backlight enable_gpio field
ARM: pxa: Initialize PWM backlight enable_gpio field
ARM: OMAP: Initialize PWM backlight enable_gpio field
pwm-backlight: Add optional enable GPIO
pwm-backlight: Track enable state
pwm-backlight: Refactor backlight power on/off
pwm-backlight: Improve readability
...
Remove the non-standard EP93xx PWM driver in drivers/misc and add
a new driver for the PWM controllers on the EP93xx platform based
on the PWM framework.
These PWM controllers each support 1 PWM channel with programmable
duty cycle, frequency, and polarity inversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This driver requests and remaps a memory region as configured in the
device tree. It serves memory from this region via the genalloc API. It
optionally enables the SRAM clock.
Other drivers can retrieve the genalloc pool from a phandle pointing to
this drivers' device node in the device tree.
The allocation granularity is hard-coded to 32 bytes for now, to make the
SRAM driver useful for the 6502 remoteproc driver. There is overhead for
bigger SRAMs, where only a much coarser allocation granularity is needed:
At 32 bytes minimum allocation size, a 256 KiB SRAM needs a 1 KiB bitmap
to track allocations.
[akpm@linux-foundation.org: fix Kconfig text, make sram_init static]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Michal Simek <monstr@monstr.eu>
Cc: Dong Aisheng <dong.aisheng@linaro.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Shijie <shijie8@gmail.com>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Matt Porter <mporter@ti.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This module accepts a single 'irq' parameter, which it should register for.
Its sole purpose is to help with debugging of IRQ sharing problems, by
force-enabling IRQ that would otherwise be disabled.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for bitstream configuration (programming /
loading) of the Lattice ECP3 FPGA's via the SPI bus.
Here an example on my custom MPC5200 based board:
$ echo 1 > /sys/class/firmware/spi0.0/loading
$ cat fpga_a4m2k.bit > /sys/class/firmware/spi0.0/data
$ echo 0 > /sys/class/firmware/spi0.0/loading
leads to these messages:
lattice-ecp3 spi0.0: FPGA Lattice ECP3-35 detected
lattice-ecp3 spi0.0: Configuring the FPGA...
lattice-ecp3 spi0.0: FPGA succesfully configured!
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VMCI head config patch Adds all the necessary files to enable building of the VMCI
module with the Linux Makefiles and Kconfig systems. Also adds the header files used
for building modules against the driver.
Signed-off-by: George Zhang <georgezhang@vmware.com>
Acked-by: Andy king <acking@vmware.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull staging tree changes from Greg Kroah-Hartman:
"Here is the big staging tree pull request for the 3.5-rc1 merge
window.
Loads of changes here, and we just narrowly added more lines than we
added:
622 files changed, 28356 insertions(+), 26059 deletions(-)
But, good news is that there is a number of subsystems that moved out
of the staging tree, to their respective "real" portions of the
kernel.
Code that moved out was:
- iio core code
- mei driver
- vme core and bridge drivers
There was one broken network driver that moved into staging as a step
before it is removed from the tree (pc300), and there was a few new
drivers added to the tree:
- new iio drivers
- gdm72xx wimax USB driver
- ipack subsystem and 2 drivers
All of the movements around have acks from the various subsystem
maintainers, and all of this has been in the linux-next tree for a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fixed up various trivial conflicts, along with a non-trivial one found
in -next and pointed out by Olof Johanssen: a clean - but incorrect -
merge of the arch/arm/boot/dts/at91sam9g20.dtsi file. Fix up manually
as per Stephen Rothwell.
* tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (536 commits)
Staging: bcm: Remove two unused variables from Adapter.h
Staging: bcm: Removes the volatile type definition from Adapter.h
Staging: bcm: Rename all "INT" to "int" in Adapter.h
Staging: bcm: Fix warning: __packed vs. __attribute__((packed)) in Adapter.h
Staging: bcm: Correctly format all comments in Adapter.h
Staging: bcm: Fix all whitespace issues in Adapter.h
Staging: bcm: Properly format braces in Adapter.h
Staging: ipack/bridges/tpci200: remove unneeded casts
Staging: ipack/bridges/tpci200: remove TPCI200_SHORTNAME constant
Staging: ipack: remove board_name and bus_name fields from struct ipack_device
Staging: ipack: improve the register of a bus and a device in the bus.
staging: comedi: cleanup all the comedi_driver 'detach' functions
staging: comedi: remove all 'default N' in Kconfig
staging: line6/config.h: Delete unused header
staging: gdm72xx depends on NET
staging: gdm72xx: Set up parent link in sysfs for gdm72xx devices
staging: drm/omap: initial dmabuf/prime import support
staging: drm/omap: dmabuf/prime mmap support
pstore/ram: Add ECC support
pstore/ram: Switch to persistent_ram routines
...
Pull driver core updates from Greg Kroah-Hartman:
"Here's the driver core, and other driver subsystems, pull request for
the 3.5-rc1 merge window.
Outside of a few minor driver core changes, we ended up with the
following different subsystem and core changes as well, due to
interdependancies on the driver core:
- hyperv driver updates
- drivers/memory being created and some drivers moved into it
- extcon driver subsystem created out of the old Android staging
switch driver code
- dynamic debug updates
- printk rework, and /dev/kmsg changes
All of this has been tested in the linux-next releases for a few weeks
with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.
* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
uio_pdrv_genirq: get irq through platform resource if not set otherwise
memory: tegra{20,30}-mc: Remove empty *_remove()
printk() - isolate KERN_CONT users from ordinary complete lines
sysfs: get rid of some lockdep false positives
Drivers: hv: util: Properly handle version negotiations.
Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
memory: tegra{20,30}-mc: Use dev_err_ratelimited()
driver core: Add dev_*_ratelimited() family
Driver Core: don't oops with unregistered driver in driver_find_device()
printk() - restore prefix/timestamp printing for multi-newline strings
printk: add stub for prepend_timestamp()
ARM: tegra30: Make MC optional in Kconfig
ARM: tegra20: Make MC optional in Kconfig
ARM: tegra30: MC: Remove unnecessary BUG*()
ARM: tegra20: MC: Remove unnecessary BUG*()
printk: correctly align __log_buf
ARM: tegra30: Add Tegra Memory Controller(MC) driver
ARM: tegra20: Add Tegra Memory Controller(MC) driver
printk() - restore timestamp printing at console output
printk() - do not merge continuation lines of different threads
...
This patch remove old max8997-muic drvier because of newly Extcon framework.
Extcon framework manages the external connector, so add extcon-max8997 driver
by using Extcon interface to support MUIC feature of Maxim 8997 PMIC instead
of max8997-muic driver(drivers/misc/max8997-muic.c).
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[mchehab@redhat.com: Fix a merge conflict]
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (26 commits)
amba pl011: workaround for uart registers lockup
n_gsm: fix the wrong FCS handling
pch_uart: add missing comment about OKI ML7223
pch_uart: Add MSI support
tty: fix "IRQ45: nobody cared"
PTI feature to allow user to name and mark masterchannel request.
0 for o PTI Makefile bug.
tty: serial: samsung.c remove legacy PM code.
SERIAL: SC26xx: Fix link error.
serial: mrst_max3110: initialize waitqueue earlier
mrst_max3110: Change max missing message priority.
tty: s5pv210: Add delay loop on fifo reset function for UART
tty/serial: Fix XSCALE serial ports, e.g. ce4100
serial: bfin_5xx: fix off-by-one with resource size
drivers/tty: use printk_ratelimited() instead of printk_ratelimit()
tty: n_gsm: Added refcount usage to gsm_mux and gsm_dlci structs
tty: n_gsm: Add raw-ip support
tty: n_gsm: expose gsmtty device nodes at ldisc open time
pch_phub: Fix register miss-setting issue
serial: 8250, increase PASS_LIMIT
...
The FSA9480 is a USB port accessory detector and switch. This patch adds
support the FSA9480 USB Switch.
[akpm@linux-foundation.org: make a couple of things static]
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes an issue where 'obj' was actually
spelled '0bj' and would skip compiling the pti driver.
Signed-off-by: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits)
serial: 8250_pci: add support for Cronyx Omega PCI multiserial board.
tty/serial: Fix break handling for PORT_TEGRA
tty/serial: Add explicit PORT_TEGRA type
n_tracerouter and n_tracesink ldisc additions.
Intel PTI implementaiton of MIPI 1149.7.
Kernel documentation for the PTI feature.
export kernel call get_task_comm().
tty: Remove to support serial for S5P6442
pch_phub: Support new device ML7223
8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
ASoC: Update cx20442 for TTY API change
pch_uart: Support new device ML7223 IOH
parport: Use request_muxed_region for IT87 probe and lock
tty/serial: add support for Xilinx PS UART
n_gsm: Use print_hex_dump_bytes
drivers/tty/moxa.c: Put correct tty value
TTY: tty_io, annotate locking functions
TTY: serial_core, remove superfluous set_task_state
TTY: serial_core, remove invalid test
Char: moxa, fix locking in moxa_write
...
Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and
drivers/tty/serial/Makefile.
I did the hci_ldisc thing as an evil merge, cleaning things up.
This driver allows userspace to access the data processing FPGAs on the
OVRO CARMA board. It has two modes of operation:
1) random access
This allows users to poke any DATA-FPGA registers by using mmap to map
the address region directly into their memory map.
2) correlation dumping
When correlating, the DATA-FPGA's have special requirements for getting
the data out of their memory before the next correlation. This nominally
happens at 64Hz (every 15.625ms). If the data is not dumped before the
next correlation, data is lost.
The data dumping driver handles buffering up to 1 second worth of
correlation data from the FPGAs. This lowers the realtime scheduling
requirements for the userspace process reading the device.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The PTI (Parallel Trace Interface) driver directs
trace data routed from various parts in the system out
through an Intel Penwell PTI port and out of the mobile
device for analysis with a debugging tool (Lauterbach or Fido).
Though n_tracesink and n_tracerouter line discipline drivers
are used to extract modem tracing data to the PTI driver
and other parts of an Intel mobile solution, the PTI driver
can be used independent of n_tracesink and n_tracerouter.
You should select this driver if the target kernel is meant for
an Intel Atom (non-netbook) mobile device containing a MIPI
P1149.7 standard implementation.
Signed-off-by: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
