commit 2195f2062e upstream.
During probing, the driver tries to get a list (mask) of supported
command types in port100_get_command_type_mask() function. The value
is u64 and 0 is treated as invalid mask (no commands supported). The
function however returns also -ERRNO as u64 which will be interpret as
valid command mask.
Return 0 on every error case of port100_get_command_type_mask(), so the
probing will stop.
Cc: <stable@vger.kernel.org>
Fixes: 0347a6ab30 ("NFC: port100: Commands mechanism implementation")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e7b30d24a upstream.
There is a use after free memory corruption during module exit:
- nfcsim_exit()
- nfcsim_device_free(dev0)
- nfc_digital_unregister_device()
This iterates over command queue and frees all commands,
- dev->up = false
- nfcsim_link_shutdown()
- nfcsim_link_recv_wake()
This wakes the sleeping thread nfcsim_link_recv_skb().
- nfcsim_link_recv_skb()
Wake from wait_event_interruptible_timeout(),
call directly the deb->cb callback even though (dev->up == false),
- digital_send_cmd_complete()
Dereference of "struct digital_cmd" cmd which was freed earlier by
nfc_digital_unregister_device().
This causes memory corruption shortly after (with unrelated stack
trace):
nfc nfc0: NFC: nfcsim_recv_wq: Device is down
llcp: nfc_llcp_recv: err -19
nfc nfc1: NFC: nfcsim_recv_wq: Device is down
BUG: unable to handle page fault for address: ffffffffffffffed
Call Trace:
fsnotify+0x54b/0x5c0
__fsnotify_parent+0x1fe/0x300
? vfs_write+0x27c/0x390
vfs_write+0x27c/0x390
ksys_write+0x63/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
KASAN report:
BUG: KASAN: use-after-free in digital_send_cmd_complete+0x16/0x50
Write of size 8 at addr ffff88800a05f720 by task kworker/0:2/71
Workqueue: events nfcsim_recv_wq [nfcsim]
Call Trace:
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x21/0x140
? digital_send_cmd_complete+0x16/0x50
? digital_send_cmd_complete+0x16/0x50
kasan_report.cold+0x7f/0x11b
? digital_send_cmd_complete+0x16/0x50
? digital_dep_link_down+0x60/0x60
digital_send_cmd_complete+0x16/0x50
nfcsim_recv_wq+0x38f/0x3d5 [nfcsim]
? nfcsim_in_send_cmd+0x4a/0x4a [nfcsim]
? lock_is_held_type+0x98/0x110
? finish_wait+0x110/0x110
? rcu_read_lock_sched_held+0x9c/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x12e/0x1f0
This flow of calling digital_send_cmd_complete() callback on driver exit
is specific to nfcsim which implements reading and sending work queues.
Since the NFC digital device was unregistered, the callback should not
be called.
Fixes: 204bddcb50 ("NFC: nfcsim: Make use of the Digital layer")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ca4d4c34ae ]
If the "type_a->nfcid_len" is too large then it would lead to memory
corruption in pn533_target_found_type_a() when we do:
memcpy(nfc_tgt->nfcid1, tgt_type_a->nfcid_data, nfc_tgt->nfcid1_len);
Fixes: c3b1e1e8a7 ("NFC: Export NFCID1 from pn533")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8f0a86795 ]
GPIOs - as returned by of_get_named_gpio() and used by the gpiolib - are
signed integers, where negative number indicates error. The return
value of of_get_named_gpio() should not be assigned to an unsigned int
because in case of !CONFIG_GPIOLIB such number would be a valid GPIO.
Fixes: c04c674fad ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201123162351.209100-1-krzk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f97c04c316 ]
When down_killable() fails, skb_resp should be freed
just like when st95hf_spi_send() fails.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e8fd3a97f ]
The implementation of s3fwrn5_recv_frame() is supposed to consume skb on
all execution paths. Release skb before returning -ENODEV.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3decabdc71 ]
st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path.
Add the missed function call to fix it.
Fixes: 1892bf844e ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0dcdf9f640 ]
The nci_conn_max_data_pkt_payload_size() function sometimes returns
-EPROTO so "max_size" needs to be signed for the error handling to
work. We can make "payload_size" an int as well.
Fixes: a06347c04c ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c3331d2fe3 ]
The PN544 driver checks the "enable" polarity during of driver's probe and
it's doing that by turning ON and OFF NFC with different polarities until
enabling succeeds. It takes some time for the hardware to power-down, and
thus, to deassert the IRQ that is raised by turning ON the hardware.
Since the delay after last power-down of the polarity-checking process is
missed in the code, the interrupt may trigger immediately after installing
the IRQ handler (right after the checking is done), which results in IRQ
handler trying to touch the disabled HW and ends with marking NFC as
'DEAD' during of the driver's probe:
pn544_hci_i2c 1-002a: NFC: nfc_en polarity : active high
pn544_hci_i2c 1-002a: NFC: invalid len byte
shdlc: llc_shdlc_recv_frame: NULL Frame -> link is dead
This patch fixes the occasional NFC initialization failure on Nexus 7
device.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 718eae277e ]
Convert cpu_to_le16(le16_to_cpu(frame->datalen) + len) to
use le16_add_cpu(), which is more concise and does the same thing.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5080832627 upstream.
Clang warns
../drivers/nfc/pn544/pn544.c:696:4: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
return nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
^
../drivers/nfc/pn544/pn544.c:692:3: note: previous statement is here
if (target->nfcid1_len != 4 && target->nfcid1_len != 7 &&
^
1 warning generated.
This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.
Fixes: da052850b9 ("NFC: Add pn544 presence check for different targets")
Link: https://github.com/ClangBuiltLinux/linux/issues/814
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a71a29f50d ]
I2C communication errors (-EREMOTEIO) during the IRQ handler of nxp-nci
result in a NULL pointer dereference at the moment:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 355 Comm: irq/137-nxp-nci Not tainted 5.4.0-rc6 #1
RIP: 0010:skb_queue_tail+0x25/0x50
Call Trace:
nci_recv_frame+0x36/0x90 [nci]
nxp_nci_i2c_irq_thread_fn+0xd1/0x285 [nxp_nci_i2c]
? preempt_count_add+0x68/0xa0
? irq_forced_thread_fn+0x80/0x80
irq_thread_fn+0x20/0x60
irq_thread+0xee/0x180
? wake_threads_waitq+0x30/0x30
kthread+0xfb/0x130
? irq_thread_check_affinity+0xd0/0xd0
? kthread_park+0x90/0x90
ret_from_fork+0x1f/0x40
Afterward the kernel must be rebooted to work properly again.
This happens because it attempts to call nci_recv_frame() with skb == NULL.
However, unlike nxp_nci_fw_recv_frame(), nci_recv_frame() does not have any
NULL checks for skb, causing the NULL pointer dereference.
Change the code to call only nxp_nci_fw_recv_frame() in case of an error.
Make sure to log it so it is obvious that a communication error occurred.
The error above then becomes:
nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121
nci: __nci_request: wait_for_completion_interruptible_timeout failed 0
nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121
Fixes: 6be88670fc ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5f9f0b11f0 upstream.
If starting the transfer of a command suceeds but the transfer for the reply
fails, it is not enough to initiate killing the transfer for the
command may still be running. You need to wait for the killing to finish
before you can reuse URB and buffer.
Reported-and-tested-by: syzbot+711468aa5c3a1eabf863@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 99a8efbb6e ]
The variable nfcid_skb is not changed in the callee nfc_hci_get_param()
if error occurs. Consequently, the freed variable nfcid_skb will be
freed again, resulting in a double free bug. Set nfcid_skb to NULL after
releasing it to fix the bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 517ce4e933 ]
The address of fw_vsc_cfg is on stack. Releasing it with devm_kfree() is
incorrect, which may result in a system crash or other security impacts.
The expected object to free is *fw_vsc_cfg.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d04830531d ]
Add missing <of_device_id> table for SPI driver relying on SPI
device match since compatible is in a DT binding or in a DTS.
Before this patch:
modinfo drivers/nfc/st95hf/st95hf.ko | grep alias
alias: spi:st95hf
After this patch:
modinfo drivers/nfc/st95hf/st95hf.ko | grep alias
alias: spi:st95hf
alias: of:N*T*Cst,st95hfC*
alias: of:N*T*Cst,st95hf
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2eee74b7e2 upstream.
Directly including access_ok.h can result in the following compile errors
if an architecture such as ia64 does not support direct unaligned accesses.
include/linux/unaligned/access_ok.h:7:19: error:
redefinition of 'get_unaligned_le16'
include/linux/unaligned/le_struct.h:6:19: note:
previous definition of 'get_unaligned_le16' was here
include/linux/unaligned/access_ok.h:12:19: error:
redefinition of 'get_unaligned_le32'
include/linux/unaligned/le_struct.h:11:19: note:
previous definition of 'get_unaligned_le32' was here
Include asm/unaligned.h instead and let the architecture decide which
access functions to use.
Cc: Clément Perrochaud <clement.perrochaud@effinnov.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5bf59773aa ]
Use the new of_get_compatible_child() helper to lookup the nfc child
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent node).
Fixes: e097dc624f ("NFC: nfcmrvl: add UART driver")
Fixes: d8e018c0b3 ("NFC: nfcmrvl: update device tree bindings for Marvell NFC")
Cc: stable <stable@vger.kernel.org> # 4.2
Cc: Vincent Cuissard <cuissard@marvell.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Changes in 4.9.89
blkcg: fix double free of new_blkg in blkcg_init_queue
Input: tsc2007 - check for presence and power down tsc2007 during probe
perf stat: Issue a HW watchdog disable hint
staging: speakup: Replace BUG_ON() with WARN_ON().
staging: wilc1000: add check for kmalloc allocation failure.
HID: reject input outside logical range only if null state is set
drm: qxl: Don't alloc fbdev if emulation is not supported
ARM: dts: r8a7791: Remove unit-address and reg from integrated cache
ARM: dts: r8a7792: Remove unit-address and reg from integrated cache
ARM: dts: r8a7793: Remove unit-address and reg from integrated cache
ARM: dts: r8a7794: Remove unit-address and reg from integrated cache
arm64: dts: r8a7796: Remove unit-address and reg from integrated cache
drm/sun4i: Fix up error path cleanup for master bind function
drm/sun4i: Set drm_crtc.port to the underlying TCON's output port node
ath10k: fix a warning during channel switch with multiple vaps
drm/sun4i: Fix TCON clock and regmap initialization sequence
PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()
selinux: check for address length in selinux_socket_bind()
x86/mm: Make mmap(MAP_32BIT) work correctly
perf sort: Fix segfault with basic block 'cycles' sort dimension
x86/mce: Handle broadcasted MCE gracefully with kexec
eventpoll.h: fix epoll event masks
i40e: Acquire NVM lock before reads on all devices
i40e: fix ethtool to get EEPROM data from X722 interface
perf tools: Make perf_event__synthesize_mmap_events() scale
ARM: brcmstb: Enable ZONE_DMA for non 64-bit capable peripherals
drivers: net: xgene: Fix hardware checksum setting
drivers: net: phy: xgene: Fix mdio write
drivers: net: xgene: Fix wrong logical operation
drivers: net: xgene: Fix Rx checksum validation logic
drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)
ath10k: disallow DFS simulation if DFS channel is not enabled
ath10k: fix fetching channel during potential radar detection
usb: misc: lvs: fix race condition in disconnect handling
ARM: bcm2835: Enable missing CMA settings for VC4 driver
net: ethernet: bgmac: Allow MAC address to be specified in DTB
netem: apply correct delay when rate throttling
x86/mce: Init some CPU features early
omapfb: dss: Handle return errors in dss_init_ports()
perf probe: Fix concat_probe_trace_events
perf probe: Return errno when not hitting any event
HID: clamp input to logical range if no null state
net/8021q: create device with all possible features in wanted_features
ARM: dts: Adjust moxart IRQ controller and flags
qed: Always publish VF link from leading hwfn
s390/topology: fix typo in early topology code
zd1211rw: fix NULL-deref at probe
batman-adv: handle race condition for claims between gateways
of: fix of_device_get_modalias returned length when truncating buffers
solo6x10: release vb2 buffers in solo_stop_streaming()
x86/boot/32: Defer resyncing initial_page_table until per-cpu is set up
scsi: fnic: Fix for "Number of Active IOs" in fnicstats becoming negative
scsi: ipr: Fix missed EH wakeup
media: i2c/soc_camera: fix ov6650 sensor getting wrong clock
timers, sched_clock: Update timeout for clock wrap
sysrq: Reset the watchdog timers while displaying high-resolution timers
Input: qt1070 - add OF device ID table
sched: act_csum: don't mangle TCP and UDP GSO packets
PCI: hv: Properly handle PCI bus remove
PCI: hv: Lock PCI bus on device eject
ASoC: rcar: ssi: don't set SSICR.CKDV = 000 with SSIWSR.CONT
spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer
tcp: sysctl: Fix a race to avoid unexpected 0 window from space
dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped
usb: dwc3: make sure UX_EXIT_PX is cleared
ARM: dts: bcm2835: add index to the ethernet alias
perf annotate: Fix a bug following symbolic link of a build-id file
perf buildid: Do not assume that readlink() returns a null terminated string
i40e/i40evf: Fix use after free in Rx cleanup path
scsi: be2iscsi: Check tag in beiscsi_mccq_compl_wait
driver: (adm1275) set the m,b and R coefficients correctly for power
bonding: make speed, duplex setting consistent with link state
mm: Fix false-positive VM_BUG_ON() in page_cache_{get,add}_speculative()
ALSA: firewire-lib: add a quirk of packet without valid EOH in CIP format
ARM: dts: r8a7794: Add DU1 clock to device tree
ARM: dts: r8a7794: Correct clock of DU1
ARM: dts: silk: Correct clock of DU1
blk-throttle: make sure expire time isn't too big
regulator: core: Limit propagation of parent voltage count and list
perf trace: Handle unpaired raw_syscalls:sys_exit event
f2fs: relax node version check for victim data in gc
drm/ttm: never add BO that failed to validate to the LRU list
bonding: refine bond_fold_stats() wrap detection
PCI: Apply Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
powerpc/mm/hugetlb: Filter out hugepage size not supported by page table layout
braille-console: Fix value returned by _braille_console_setup
drm/vmwgfx: Fixes to vmwgfx_fb
vxlan: vxlan dev should inherit lowerdev's gso_max_size
NFC: nfcmrvl: Include unaligned.h instead of access_ok.h
NFC: nfcmrvl: double free on error path
NFC: pn533: change order of free_irq and dev unregistration
ARM: dts: r7s72100: fix ethernet clock parent
ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks
ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks
ARM: dts: r8a7793: Correct parent of SSI[0-9] clocks
powerpc: Avoid taking a data miss on every userspace instruction miss
net: hns: Correct HNS RSS key set function
net/faraday: Add missing include of of.h
qed: Fix TM block ILT allocation
rtmutex: Fix PI chain order integrity
printk: Correctly handle preemption in console_unlock()
drm: rcar-du: Handle event when disabling CRTCs
ARM: dts: koelsch: Correct clock frequency of X2 DU clock input
reiserfs: Make cancel_old_flush() reliable
ASoC: rt5677: Add OF device ID table
IB/hfi1: Check for QSFP presence before attempting reads
ALSA: firewire-digi00x: add support for console models of Digi00x series
ALSA: firewire-digi00x: handle all MIDI messages on streaming packets
fm10k: correctly check if interface is removed
EDAC, altera: Fix peripheral warnings for Cyclone5
scsi: ses: don't get power status of SES device slot on probe
qed: Correct MSI-x for storage
apparmor: Make path_max parameter readonly
iommu/iova: Fix underflow bug in __alloc_and_insert_iova_range
kvm/svm: Setup MCG_CAP on AMD properly
kvm: nVMX: Disallow userspace-injected exceptions in guest mode
video: ARM CLCD: fix dma allocation size
drm/radeon: Fail fb creation from imported dma-bufs.
drm/amdgpu: Fail fb creation from imported dma-bufs. (v2)
drm/rockchip: vop: Enable pm domain before vop_initial
i40e: only register client on iWarp-capable devices
coresight: Fixes coresight DT parse to get correct output port ID.
lkdtm: turn off kcov for lkdtm_rodata_do_nothing:
tty: amba-pl011: Fix spurious TX interrupts
serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off
MIPS: BPF: Quit clobbering callee saved registers in JIT code.
MIPS: BPF: Fix multiple problems in JIT skb access helpers.
MIPS: r2-on-r6-emu: Fix BLEZL and BGTZL identification
MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters
v4l: vsp1: Prevent multiple streamon race commencing pipeline early
v4l: vsp1: Register pipe with output WPF
regulator: isl9305: fix array size
md/raid6: Fix anomily when recovering a single device in RAID6.
md.c:didn't unlock the mddev before return EINVAL in array_size_store
powerpc/nohash: Fix use of mmu_has_feature() in setup_initial_memory_limit()
usb: dwc2: Make sure we disconnect the gadget state
usb: gadget: dummy_hcd: Fix wrong power status bit clear/reset in dummy_hub_control()
perf evsel: Return exact sub event which failed with EPERM for wildcards
iwlwifi: mvm: fix RX SKB header size and align it properly
drivers/perf: arm_pmu: handle no platform_device
perf inject: Copy events when reordering events in pipe mode
net: fec: add phy-reset-gpios PROBE_DEFER check
perf session: Don't rely on evlist in pipe mode
vfio/powerpc/spapr_tce: Enforce IOMMU type compatibility check
vfio/spapr_tce: Check kzalloc() return when preregistering memory
scsi: sg: check for valid direction before starting the request
scsi: sg: close race condition in sg_remove_sfp_usercontext()
ALSA: hda: Add Geminilake id to SKL_PLUS
kprobes/x86: Fix kprobe-booster not to boost far call instructions
kprobes/x86: Set kprobes pages read-only
pwm: tegra: Increase precision in PWM rate calculation
clk: qcom: msm8996: Fix the vfe1 powerdomain name
Bluetooth: Avoid bt_accept_unlink() double unlinking
Bluetooth: 6lowpan: fix delay work init in add_peer_chan()
mac80211_hwsim: use per-interface power level
ath10k: fix compile time sanity check for CE4 buffer size
wil6210: fix protection against connections during reset
wil6210: fix memory access violation in wil_memcpy_from/toio_32
perf stat: Fix bug in handling events in error state
mwifiex: Fix invalid port issue
drm/edid: set ELD connector type in drm_edid_to_eld()
video/hdmi: Allow "empty" HDMI infoframes
HID: elo: clear BTN_LEFT mapping
iwlwifi: mvm: rs: don't override the rate history in the search cycle
clk: meson: gxbb: fix wrong clock for SARADC/SANA
ARM: dts: exynos: Correct Trats2 panel reset line
sched: Stop switched_to_rt() from sending IPIs to offline CPUs
sched: Stop resched_cpu() from sending IPIs to offline CPUs
test_firmware: fix setting old custom fw path back on exit
net: ieee802154: adf7242: Fix bug if defined DEBUG
net: xfrm: allow clearing socket xfrm policies.
mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()
net: thunderx: Set max queue count taking XDP_TX into account
ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin
ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
mtd: nand: ifc: update bufnum mask for ver >= 2.0.0
userns: Don't fail follow_automount based on s_user_ns
leds: pm8058: Silence pointer to integer size warning
power: supply: ab8500_charger: Fix an error handling path
power: supply: ab8500_charger: Bail out in case of error in 'ab8500_charger_init_hw_registers()'
ath10k: update tdls teardown state to target
scsi: ses: don't ask for diagnostic pages repeatedly during probe
pwm: stmpe: Fix wrong register offset for hwpwm=2 case
clk: qcom: msm8916: fix mnd_width for codec_digcodec
mwifiex: cfg80211: do not change virtual interface during scan processing
ath10k: fix invalid STS_CAP_OFFSET_MASK
tools/usbip: fixes build with musl libc toolchain
spi: sun6i: disable/unprepare clocks on remove
bnxt_en: Don't print "Link speed -1 no longer supported" messages.
scsi: core: scsi_get_device_flags_keyed(): Always return device flags
scsi: devinfo: apply to HP XP the same flags as Hitachi VSP
scsi: dh: add new rdac devices
media: vsp1: Prevent suspending and resuming DRM pipelines
media: cpia2: Fix a couple off by one bugs
veth: set peer GSO values
drm/amdkfd: Fix memory leaks in kfd topology
powerpc/modules: Don't try to restore r2 after a sibling call
agp/intel: Flush all chipset writes after updating the GGTT
mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED
mac80211: remove BUG() when interface type is invalid
ASoC: nuc900: Fix a loop timeout test
ipvlan: add L2 check for packets arriving via virtual devices
rcutorture/configinit: Fix build directory error message
locking/locktorture: Fix num reader/writer corner cases
ima: relax requiring a file signature for new files with zero length
net: hns: Some checkpatch.pl script & warning fixes
x86/boot/32: Fix UP boot on Quark and possibly other platforms
x86/cpufeatures: Add Intel PCONFIG cpufeature
selftests/x86/entry_from_vm86: Exit with 1 if we fail
selftests/x86: Add tests for User-Mode Instruction Prevention
selftests/x86: Add tests for the STR and SLDT instructions
selftests/x86/entry_from_vm86: Add test cases for POPF
x86/vm86/32: Fix POPF emulation
x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels
x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist
x86/mm: Fix vmalloc_fault to use pXd_large
parisc: Handle case where flush_cache_range is called with no context
ALSA: pcm: Fix UAF in snd_pcm_oss_get_formats()
ALSA: hda - Revert power_save option default value
ALSA: seq: Fix possible UAF in snd_seq_check_queue()
ALSA: seq: Clear client entry before deleting else at closing
drm/amdgpu: fix prime teardown order
drm/amdgpu/dce: Don't turn off DP sink when disconnected
fs: Teach path_connected to handle nfs filesystems with multiple roots.
lock_parent() needs to recheck if dentry got __dentry_kill'ed under it
fs/aio: Add explicit RCU grace period when freeing kioctx
fs/aio: Use RCU accessors for kioctx_table->table[]
irqchip/gic-v3-its: Ensure nr_ites >= nr_lpis
scsi: sg: fix SG_DXFER_FROM_DEV transfers
scsi: sg: fix static checker warning in sg_is_valid_dxfer
scsi: sg: only check for dxfer_len greater than 256M
btrfs: alloc_chunk: fix DUP stripe size handling
btrfs: Fix use-after-free when cleaning up fs_devs with a single stale device
scsi: qla2xxx: Fix extraneous ref on sp's after adapter break
USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
usb: dwc3: Fix GDBGFIFOSPACE_TYPE values
usb: gadget: bdc: 64-bit pointer capability check
Linux 4.9.89
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit d916d92372 ]
Including linux/unaligned/access_ok.h causes the allmodconfig build on
ia64 (and maybe others) to fail with the following warnings:
include/linux/unaligned/access_ok.h:7:19: error: redefinition of 'get_unaligned_le16'
include/linux/unaligned/access_ok.h:12:19: error: redefinition of 'get_unaligned_le32'
include/linux/unaligned/access_ok.h:17:19: error: redefinition of 'get_unaligned_le64'
include/linux/unaligned/access_ok.h:22:19: error: redefinition of 'get_unaligned_be16'
include/linux/unaligned/access_ok.h:27:19: error: redefinition of 'get_unaligned_be32'
include/linux/unaligned/access_ok.h:32:19: error: redefinition of 'get_unaligned_be64'
include/linux/unaligned/access_ok.h:37:20: error: redefinition of 'put_unaligned_le16'
include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_le32'
include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_le64'
include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_be16'
include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_be32'
include/linux/unaligned/access_ok.h:42:20: error: redefinition of 'put_unaligned_be64'
Fix these by including asm/unaligned.h instead and leave it up to the
architecture to decide how to implement unaligned accesses.
Fixes: 3194c68701 ("NFC: nfcmrvl: add firmware download support")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Link: https://lkml.org/lkml/2016/10/22/247
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Overflow on memcpy is possible in kernel driver for st21nfca's
NFC HCI layer when handling connectivity events if aid_len or
params_len are bigger than the buffer size.
Memory leak is possible when parameter tag is invalid.
Bug: 62679581
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Possible buffer overflow when reading next_read_size bytes into
tmp buffer after next_read_size was extracted from a previous packet.
Bug: 62678828
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Out of bounds kernel accesses in st21nfca's NFC HCI layer
might happen when handling ATR_REQ events if user-specified
atr_req->length is bigger than the buffer size. In
that case memcpy() inside st21nfca_tm_send_atr_res() will
read extra bytes resulting in OOB read from the kernel heap.
Bug: 62679012
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
commit b6355fb3f5 upstream.
We are checking phy after dereferencing it. We can print the debug
information after checking it. If phy is NULL then we will get a good
stack trace to tell us that we are in this irq handler.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2497128133 upstream.
If port100_send_ack() was called twice or more, it has race to hangup.
port100_send_ack() port100_send_ack()
init_completion()
[...]
dev->cmd_cancel = true
/* this removes previous from completion */
init_completion()
[...]
dev->cmd_cancel = true
wait_for_completion()
/* never be waked up */
wait_for_completion()
Like above race, this code is not assuming port100_send_ack() is
called twice or more.
To fix, this checks dev->cmd_cancel to know if prior cancel is
in-flight or not. And never be remove prior task from completion by
using reinit_completion(), so this guarantees to be waked up properly
soon or later.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45dd39b974 upstream.
The nci-device was never deregistered in the event that
fw-initialisation failed.
Fix this by moving the firmware initialisation before device
registration since the firmware work queue should be available before
registering.
Note that this depends on a recent fix that moved device-name
initialisation back to to nci_allocate_device() as the
firmware-workqueue name is now derived from the nfc-device name.
Fixes: 3194c68701 ("NFC: nfcmrvl: add firmware download support")
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5834ac229 upstream.
Use the nfc- rather than phy-device in firmware-management code that
needs a valid struct device.
This specifically fixes a NULL-pointer dereference in
nfcmrvl_fw_dnld_init() during registration when the underlying tty is
one end of a Unix98 pty.
Note that the driver still uses the phy device for any debugging, which
is fine for now.
Fixes: 3194c68701 ("NFC: nfcmrvl: add firmware download support")
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cbe40112f upstream.
This specifically fixes resource leaks in the registration error paths.
Device-managed resources is a bad fit for this driver as devices can be
registered from the n_nci line discipline. Firstly, a tty may not even
have a corresponding device (should it be part of a Unix98 pty)
something which would lead to a NULL-pointer dereference when
registering resources.
Secondly, if the tty has a class device, its lifetime exceeds that of
the line discipline, which means that resources would leak every time
the line discipline is closed (or if registration fails).
Currently, the devres interface was only being used to request a reset
gpio despite the fact that it was already explicitly freed in
nfcmrvl_nci_unregister_dev() (along with the private data), something
which also prevented the resource leak at close.
Note that the driver treats gpio number 0 as invalid despite it being
perfectly valid. This will be addressed in a follow-up patch.
Fixes: b2fe288eac ("NFC: nfcmrvl: free reset gpio")
Fixes: 4a2b947f56 ("NFC: nfcmrvl: add chip reset management")
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15e0c59f15 upstream.
Make sure to check the tty-device pointer before trying to access the
parent device to avoid dereferencing a NULL-pointer when the tty is one
end of a Unix98 pty.
Fixes: e097dc624f ("NFC: nfcmrvl: add UART driver")
Cc: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NFC version reply size checked against only header size, not against
full message size. That may lead potentially to uninitialized memory access
in version data.
That leads to warnings when version data is accessed:
drivers/misc/mei/bus-fixup.c: warning: '*((void *)&ver+11)' may be used uninitialized in this function [-Wuninitialized]: => 212:2
Reported in
Build regressions/improvements in v4.9-rc3
https://lkml.org/lkml/2016/10/30/57
Fixes: 59fcd7c63a (mei: nfc: Initial nfc implementation)
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samuel Ortiz says:
====================
NFC 4.8 pull request
This is the first NFC pull request for 4.8. We have:
- A fairly large NFC digital stack patchset:
* RTOX fixes.
* Proper DEP RWT support.
* ACK and NACK PDUs handling fixes, in both initiator
and target modes.
* A few memory leak fixes.
- A conversion of the nfcsim driver to use the digital stack.
The driver supports the DEP protocol in both NFC-A and NFC-F.
- Error injection through debugfs for the nfcsim driver.
- Improvements to the port100 driver for the Sony USB chipset, in
particular to the command abort and cancellation code paths.
- A few minor fixes for the pn533, trf7970a and fdp drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows to simulate the lost of frames exchanged between the 2
nfcsim devices through a control entry in the debugfs and is used as
follow:
echo n > /sys/kernel/debug/nfcsim/nfcX/dropframe
Where n specifies the number of frames to be dropped between 0 and 255
and nfcX is either nfc0 or nfc1, one of the two nfcsim devices.
In the following example, the next frame that should be sent by the nfc0
device will be dropped and thus not received by the nfc1 device:
echo 1 > /sys/kernel/debug/nfcsim/nfc0/dropframe
The value of 0 can be used to reset the dropframe counter.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The idea is to have a way to control and/or modify the behavior of the
nfcsim virtual devices.
This patch creates a folder tree in the debug filesystem. The debugfs is
usually mounted into /sys/kernel/debug and the nfcsim entries are
located in DEBUGFS/nfcsim/nfcX/ where X is either 0 or 1 depending on
the device you want to address.
These folders are empty for now and control entries will be added by
upcoming commits.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
On mips and parisc:
drivers/bluetooth/btwilink.c: In function 'ti_st_open':
drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow]
hst->reg_status = -EINPROGRESS;
drivers/nfc/nfcwilink.c: In function 'nfcwilink_open':
drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow]
drv->st_register_cb_status = -EINPROGRESS;
There are actually two issues:
1. Whether "char" is signed or unsigned depends on the architecture.
As the completion callback data is used to pass a (negative) error
code, it should always be signed.
2. EINPROGRESS is 150 on mips, 245 on parisc.
Hence -EINPROGRESS doesn't fit in a signed 8-bit number.
Change the callback status from "char" to "int" to fix these.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The nfcsim driver now depends on the Digital layer. This patch adds the
missing dependency on NFC_DIGITAL for NFC_SIM config.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
If a command is still being processed by the device, the switch RF off
command will be rejected. With this patch, the port100 driver calls
port100_abort_cmd() before sending the switch RF off command.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch makes the abort_cmd function synchronous. This allows the
caller to immediately send a new command after abort_cmd() returns.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The USB out_urb used to send commands to the device can be submitted
through the standard command processing queue coming from the Digital
Protocol layer but it can also be submitted from port100_abort_cmd().
To not submit the URB while already active, a mutex is now used to
protect it and a cmd_cancel flag is used to not send command while
canceling the previous one.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch ensures that a command is not still in process before sending
a new one to the device. This can happen when neard is in constant
polling mode: the configure_hw command can be sent when neard restarts
polling after a LLCP SYMM timeout but before the device has returned in
timeout from the last DEP frame sent.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
With this complete rewrite, the loopback nfcsim driver now relies on the
Digital layer of the nfc stack. As with the previous version, 2 nfc
devices are declared when the driver is initialized. The driver supports
the NFC_DEP protocol in NFC-A and NFC-F technologies.
The 2 devices are using a pair of virtual links for sk_buff exchange.
The out-link of one device is the in-link of the other and conversely.
To receive data, a device calls nfcsim_link_recv_skb() on its in-link
and waits for incoming data on a wait queue. To send data, a device
calls nfcsim_link_send_skb() on its out-link which stores the passed skb
and signals its wait queue. If the peer device was in the
nfcsim_link_recv_skb() call, it will be signaled and will be able to
pass the received sk_buff up to the Digital layer.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
When setting the driver framing as NFC_DIGITAL_FRAMING_NFCF_NFC_DEP it
used to be already configured as NFC_DIGITAL_FRAMING_NFCF which is the
same. So this entry was empty in the in_protocols table.
Now that the digital stack can handle PLS requests, it can be changed
on the fly from NFC_DIGITAL_FRAMING_NFCA_NFC_DEP.
This patch explicitly defines the framing configuration values for
NFC_DIGITAL_FRAMING_NFCF_NFC_DEP.
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
drivers/nfc/fdp/fdp.c: In function ‘fdp_nci_patch_otp’:
drivers/nfc/fdp/fdp.c:373: warning: comparison is always false due to limited range of data type
drivers/nfc/fdp/fdp.c: In function ‘fdp_nci_patch_ram’:
drivers/nfc/fdp/fdp.c:444: warning: comparison is always false due to limited range of data type
fdp_nci_create_conn() may return a negative error code, which is
silently ignored by assigning it to a u8.
Change conn_id from u8 to int to fix this.
Fixes: a06347c04c ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We can't pass devm_ allocated pointers to kfree() because they will be
freed again after the drive is unloaded.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
