[ Upstream commit 0d45a1373e ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_threaded_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an
original error code. Stop calling request_threaded_irq() with the invalid
IRQ #s.
Fixes: 9ba96ae507 ("usb: omap1: Tahvo USB transceiver driver")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/8280d6a4-8e9a-7cfe-1aa9-db586dc9afdf@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0881e22c06 ]
The driver neglects to check the result of platform_get_irq()'s calls and
blithely passes the negative error codes to request_threaded_irq() (which
takes *unsigned* IRQ #), causing them both to fail with -EINVAL, overriding
an original error code. Stop calling request_threaded_irq() with the
invalid IRQ #s.
Fixes: c33fad0c37 ("usb: otg: Adding twl6030-usb transceiver driver for OMAP4430")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/9507f50b-50f1-6dc4-f57c-3ed4e53a1c25@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecc2f30dbb ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code. Stop calling request_irq() with the invalid IRQ #s.
Fixes: 0807c500a1 ("USB: add Freescale USB OTG Transceiver driver")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/b0a86089-8b8b-122e-fd6d-73e8c2304964@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a7f12a21f6 upstream.
Commit fd567653bd ("usb: phy: isp1301: Add OF device ID table")
added an OF device ID table, but used the of_match_ptr() macro
that will lead to a build warning if CONFIG_OF symbol is disabled:
drivers/usb/phy//phy-isp1301.c:36:34: warning: ‘isp1301_of_match’ defined but not used [-Wunused-const-variable=]
static const struct of_device_id isp1301_of_match[] = {
^~~~~~~~~~~~~~~~
Fixes: fd567653bd ("usb: phy: isp1301: Add OF device ID table")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2100e3ca36 ]
The dependency to ensure this driver links correctly fails since
it can not be a loadable module:
drivers/usb/phy/phy-fsl-usb.o: In function `fsl_otg_set_peripheral':
phy-fsl-usb.c:(.text+0x2224): undefined reference to `usb_gadget_vbus_disconnect'
Make the option 'tristate' so it can work correctly.
Fixes: 5a8d651a2b ("usb: gadget: move gadget API functions to udc-core")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5895d311d2 ]
In remove(), use cancel_delayed_work_sync() to cancel the
delayed work. Otherwise there's a chance that this work
will continue to run until after the device has been removed.
This issue was detected with the help of Coccinelle.
Cc: Tony Lindgren <tony@atomide.com>
Cc: Bin Liu <b-liu@ti.com>
Fixes: b6a619a883 ("usb: phy: Check initial state for twl6030")
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2105d4259 ]
Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is
set to module then the following link error occurs.
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl':
drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp':
drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host':
drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp':
drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum':
drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral':
drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
make[1]: *** [Makefile:1020: vmlinux] Error 1
make[1]: Target 'Image' not remade because of errors.
make: *** [Makefile:152: sub-make] Error 2
make: Target 'Image' not remade because of errors.
Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a53469a68e upstream.
power off the phy should be done before populate the phy. Otherwise,
am335x_init() could be called by the phy owner to power on the phy first,
then am335x_phy_probe() turns off the phy again without the caller knowing
it.
Fixes: 2fc711d763 ("usb: phy: am335x: Enable USB remote wakeup using PHY wakeup")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a39ba90a1c ]
Fix build errors when built for PPC64:
These variables are only used on PPC32 so they don't need to be
initialized for PPC64.
../drivers/usb/phy/phy-fsl-usb.c: In function 'usb_otg_start':
../drivers/usb/phy/phy-fsl-usb.c:865:3: error: '_fsl_readl' undeclared (first use in this function); did you mean 'fsl_readl'?
_fsl_readl = _fsl_readl_be;
../drivers/usb/phy/phy-fsl-usb.c:865:16: error: '_fsl_readl_be' undeclared (first use in this function); did you mean 'fsl_readl'?
_fsl_readl = _fsl_readl_be;
../drivers/usb/phy/phy-fsl-usb.c:866:3: error: '_fsl_writel' undeclared (first use in this function); did you mean 'fsl_writel'?
_fsl_writel = _fsl_writel_be;
../drivers/usb/phy/phy-fsl-usb.c:866:17: error: '_fsl_writel_be' undeclared (first use in this function); did you mean 'fsl_writel'?
_fsl_writel = _fsl_writel_be;
../drivers/usb/phy/phy-fsl-usb.c:868:16: error: '_fsl_readl_le' undeclared (first use in this function); did you mean 'fsl_readl'?
_fsl_readl = _fsl_readl_le;
../drivers/usb/phy/phy-fsl-usb.c:869:17: error: '_fsl_writel_le' undeclared (first use in this function); did you mean 'fsl_writel'?
_fsl_writel = _fsl_writel_le;
and the sysfs "show" function return type should be ssize_t, not int:
../drivers/usb/phy/phy-fsl-usb.c:1042:49: error: initialization of 'ssize_t (*)(struct device *, struct device_attribute *, char *)' {aka 'long int (*)(struct device *, struct device_attribute *, char *)'} from incompatible pointer type 'int (*)(struct device *, struct device_attribute *, char *)' [-Werror=incompatible-pointer-types]
static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: linux-usb@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.9.84
vhost: use mutex_lock_nested() in vhost_dev_lock_vqs()
kcm: Check if sk_user_data already set in kcm_attach
kcm: Only allow TCP sockets to be attached to a KCM mux
cfg80211: check dev_set_name() return value
xfrm: skip policies marked as dead while rehashing
mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed.
xfrm: Fix stack-out-of-bounds read on socket policy lookup.
xfrm: check id proto in validate_tmpl()
sctp: set frag_point in sctp_setsockopt_maxseg correctly
blktrace: fix unlocked registration of tracepoints
drm: Require __GFP_NOFAIL for the legacy drm_modeset_lock_all
ptr_ring: fail early if queue occupies more than KMALLOC_MAX_SIZE
Provide a function to create a NUL-terminated string from unterminated data
selinux: ensure the context is NUL terminated in security_context_to_sid_core()
selinux: skip bounded transition processing if the policy isn't loaded
crypto: x86/twofish-3way - Fix %rbp usage
staging: android: ion: Add __GFP_NOWARN for system contig heap
staging: android: ion: Switch from WARN to pr_warn
blk_rq_map_user_iov: fix error override
KVM: x86: fix escape of guest dr6 to the host
kcov: detect double association with a single task
netfilter: x_tables: fix int overflow in xt_alloc_table_info()
netfilter: x_tables: avoid out-of-bounds reads in xt_request_find_{match|target}
netfilter: ipt_CLUSTERIP: fix out-of-bounds accesses in clusterip_tg_check()
netfilter: on sockopt() acquire sock lock only in the required scope
netfilter: xt_cgroup: initialize info->priv in cgroup_mt_check_v1()
netfilter: xt_RATEEST: acquire xt_rateest_mutex for hash insert
rds: tcp: atomically purge entries from rds_tcp_conn_list during netns delete
net: avoid skb_warn_bad_offload on IS_ERR
crypto: hash - annotate algorithms taking optional key
crypto: hash - prevent using keyed hashes without setting key
ASoC: ux500: add MODULE_LICENSE tag
video: fbdev/mmp: add MODULE_LICENSE
ARM: 8743/1: bL_switcher: add MODULE_LICENSE tag
arm64: dts: add #cooling-cells to CPU nodes
dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock
staging: android: ashmem: Fix a race condition in pin ioctls
binder: check for binder_thread allocation failure in binder_poll()
staging: iio: adc: ad7192: fix external frequency setting
staging: iio: ad5933: switch buffer mode to software
usbip: keep usbip_device sockfd state in sync with tcp_socket
usb: build drivers/usb/common/ when USB_SUPPORT is set
ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context
ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function
ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen
ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet
ARM: dts: logicpd-somlv: Fix wl127x pinmux
ARM: dts: am4372: Correct the interrupts_properties of McASP
ARM: dts: am437x-cm-t43: Correct the dmas property of spi0
perf top: Fix window dimensions change handling
perf bench numa: Fixup discontiguous/sparse numa nodes
media: s5k6aa: describe some function parameters
pinctrl: sunxi: Fix A80 interrupt pin bank
pinctrl: sunxi: Fix A64 UART mux value
i40iw: Correct ARP index mask
RDMA/cma: Make sure that PSN is not over max allowed
sctp: only update outstanding_bytes for transmitted queue when doing prsctp_prune
scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none
ipvlan: Add the skb->mark as flow4's member to lookup route
m68k: add missing SOFTIRQENTRY_TEXT linker section
powerpc/perf: Fix oops when grouping different pmu events
s390/dasd: prevent prefix I/O error
ARM: dts: Fix elm interrupt compiler warning
gianfar: fix a flooded alignment reports because of padding issue.
net_sched: red: Avoid devision by zero
net_sched: red: Avoid illegal values
btrfs: Fix possible off-by-one in btrfs_search_path_in_tree
brcmfmac: Avoid build error with make W=1
net: ethernet: arc: fix error handling in emac_rockchip_probe
509: fix printing uninitialized stack memory when OID is empty
gianfar: Disable EEE autoneg by default
dmaengine: ioat: Fix error handling path
dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved
clk: fix a panic error caused by accessing NULL pointer
ASoC: rockchip: disable clock on error
spi: sun4i: disable clocks in the remove function
xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies.
drm/armada: fix leak of crtc structure
dmaengine: jz4740: disable/unprepare clk if probe fails
usb: dwc3: gadget: Wait longer for controller to end command processing
usb: dwc3: of-simple: fix missing clk_disable_unprepare
mm/early_ioremap: Fix boot hang with earlyprintk=efi,keep
x86/mm/kmmio: Fix mmiotrace for page unaligned addresses
platform/x86: dell-laptop: Fix keyboard max lighting for Dell Latitude E6410
xen: XEN_ACPI_PROCESSOR is Dom0-only
hippi: Fix a Fix a possible sleep-in-atomic bug in rr_close
powerpc/64s: Fix conversion of slb_miss_common to use RFI_TO_USER/KERNEL
powerpc/64s: Simple RFI macro conversions
powerpc/64s: Improve RFI L1-D cache flush fallback
crypto: talitos - fix Kernel Oops on hashing an empty file
drm/i915: fix intel_backlight_device_register declaration
shmem: avoid maybe-uninitialized warning
clk: sunxi-ng: fix build error without CONFIG_RESET_CONTROLLER
vmxnet3: prevent building with 64K pages
perf/x86: Shut up false-positive -Wmaybe-uninitialized warning
PCI: vmd: Fix suspend handlers defined-but-not-used warning
gpio: intel-mid: Fix build warning when !CONFIG_PM
platform/x86: intel_mid_thermal: Fix suspend handlers unused warning
usb: musb: fix compilation warning on unused function
PCI: Change pci_host_common_probe() visibility
perf: xgene: Include module.h
video: fbdev: via: remove possibly unused variables
scsi: advansys: fix build warning for PCI=n
x86/ras/inject: Make it depend on X86_LOCAL_APIC=y
gpio: xgene: mark PM functions as __maybe_unused
arm64: define BUG() instruction without CONFIG_BUG
x86/fpu/math-emu: Fix possible uninitialized variable use
tools build: Add tools tree support for 'make -s'
x86/build: Silence the build with "make -s"
thermal: fix INTEL_SOC_DTS_IOSF_CORE dependencies
x86: add MULTIUSER dependency for KVM
dmaengine: zx: fix build warning
x86/platform: Add PCI dependency for PUNIT_ATOM_DEBUG
x86/vm86: Fix unused variable warning if THP is disabled
scsi: advansys: fix uninitialized data access
arm64: Kconfig: select COMPAT_BINFMT_ELF only when BINFMT_ELF is set
ALSA: hda/ca0132 - fix possible NULL pointer use
reiserfs: avoid a -Wmaybe-uninitialized warning
cw1200: fix bogus maybe-uninitialized warning
security/keys: BIG_KEY requires CONFIG_CRYPTO
drm: exynos: mark pm functions as __maybe_unused
rbd: silence bogus -Wmaybe-uninitialized warning
drm/nouveau: hide gcc-4.9 -Wmaybe-uninitialized
Input: tca8418_keypad - hide gcc-4.9 -Wmaybe-uninitialized warning
KVM: add X86_LOCAL_APIC dependency
shmem: fix compilation warnings on unused functions
tc358743: fix register i2c_rd/wr functions
go7007: add MEDIA_CAMERA_SUPPORT dependency
em28xx: only use mt9v011 if camera support is enabled
tw5864: use dev_warn instead of WARN to shut up warning
ISDN: eicon: reduce stack size of sig_ind function
clk: meson: gxbb: fix build error without RESET_CONTROLLER
kasan: rework Kconfig settings
drm/i915: hide unused intel_panel_set_backlight function
arm64: sunxi: always enable reset controller
binfmt_elf: compat: avoid unused function warning
spi: bcm-qspi: shut up warning about cfi header inclusion
idle: i7300: add PCI dependency
arm64: fix warning about swapper_pg_dir overflow
usb: phy: msm add regulator dependency
x86/microcode/AMD: Change load_microcode_amd()'s param to bool to fix preemptibility bug
KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously
KVM: VMX: clean up declaration of VPID/EPT invalidation types
KVM: nVMX: invvpid handling improvements
crypto: s5p-sss - Fix kernel Oops in AES-ECB mode
Linux 4.9.84
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
On linux-4.4 and linux-4.9 we get a warning about an array that is
never initialized when CONFIG_REGULATOR is disabled:
drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_probe':
drivers/usb/phy/phy-msm-usb.c:1911:14: error: 'regs[0].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized]
motg->vddcx = regs[0].consumer;
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~
drivers/usb/phy/phy-msm-usb.c:1912:14: error: 'regs[1].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized]
motg->v3p3 = regs[1].consumer;
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~
drivers/usb/phy/phy-msm-usb.c:1913:14: error: 'regs[2].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized]
motg->v1p8 = regs[2].consumer;
This adds a Kconfig dependency for it. In newer kernels, the driver no
longer exists, so this is only needed for stable kernels.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.9.71
mfd: fsl-imx25: Clean up irq settings during removal
crypto: rsa - fix buffer overread when stripping leading zeroes
crypto: hmac - require that the underlying hash algorithm is unkeyed
crypto: salsa20 - fix blkcipher_walk API usage
autofs: fix careless error in recent commit
tracing: Allocate mask_str buffer dynamically
USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID
USB: core: prevent malicious bNumInterfaces overflow
usbip: fix stub_rx: get_pipe() to validate endpoint number
usb: add helper to extract bits 12:11 of wMaxPacketSize
usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input
usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer
ceph: drop negative child dentries before try pruning inode's alias
usb: xhci: fix TDS for MTK xHCI1.1
Bluetooth: btusb: driver to enable the usb-wakeup feature
xhci: Don't add a virt_dev to the devs array before it's fully allocated
nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests
sched/rt: Do not pull from current CPU if only one CPU to pull
eeprom: at24: change nvmem stride to 1
dmaengine: dmatest: move callback wait queue to thread context
ext4: fix fdatasync(2) after fallocate(2) operation
ext4: fix crash when a directory's i_size is too small
mac80211: Fix addition of mesh configuration element
usb: phy: isp1301: Add OF device ID table
KVM: nVMX: do not warn when MSR bitmap address is not backed
usb: xhci-mtk: check hcc_params after adding primary hcd
md-cluster: free md_cluster_info if node leave cluster
userfaultfd: shmem: __do_fault requires VM_FAULT_NOPAGE
userfaultfd: selftest: vm: allow to build in vm/ directory
net: initialize msg.msg_flags in recvfrom
bnxt_en: Ignore 0 value in autoneg supported speed from firmware.
net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB values
net: bcmgenet: correct MIB access of UniMAC RUNT counters
net: bcmgenet: reserved phy revisions must be checked first
net: bcmgenet: power down internal phy if open or resume fails
net: bcmgenet: synchronize irq0 status between the isr and task
net: bcmgenet: Power up the internal PHY before probing the MII
rxrpc: Wake up the transmitter if Rx window size increases on the peer
net/mlx5: Fix create autogroup prev initializer
net/mlx5: Don't save PCI state when PCI error is detected
iommu/io-pgtable-arm-v7s: Check for leaf entry before dereferencing it
drm/amdgpu: fix parser init error path to avoid crash in parser fini
NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)
NFSD: fix nfsd_reset_versions for NFSv4.
Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list
drm/omap: fix dmabuf mmap for dma_alloc'ed buffers
netfilter: bridge: honor frag_max_size when refragmenting
ASoC: rsnd: fix sound route path when using SRC6/SRC9
blk-mq: Fix tagset reinit in the presence of cpu hot-unplug
writeback: fix memory leak in wb_queue_work()
net: wimax/i2400m: fix NULL-deref at probe
dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAIN
net: Resend IGMP memberships upon peer notification.
mlxsw: reg: Fix SPVM max record count
mlxsw: reg: Fix SPVMLR max record count
qed: Align CIDs according to DORQ requirement
qed: Fix mapping leak on LL2 rx flow
qed: Fix interrupt flags on Rx LL2
drm: amd: remove broken include path
intel_th: pci: Add Gemini Lake support
openrisc: fix issue handling 8 byte get_user calls
ASoC: rcar: clear DE bit only in PDMACHCR when it stops
scsi: hpsa: update check for logical volume status
scsi: hpsa: limit outstanding rescans
scsi: hpsa: do not timeout reset operations
fjes: Fix wrong netdevice feature flags
drm/radeon/si: add dpm quirk for Oland
Drivers: hv: util: move waiting for release to hv_utils_transport itself
iwlwifi: mvm: cleanup pending frames in DQA mode
sched/deadline: Add missing update_rq_clock() in dl_task_timer()
sched/deadline: Make sure the replenishment timer fires in the next period
sched/deadline: Throttle a constrained deadline task activated after the deadline
sched/deadline: Use deadline instead of period when calculating overflow
mmc: mediatek: Fixed bug where clock frequency could be set wrong
drm/radeon: reinstate oland workaround for sclk
afs: Fix missing put_page()
afs: Populate group ID from vnode status
afs: Adjust mode bits processing
afs: Deal with an empty callback array
afs: Flush outstanding writes when an fd is closed
afs: Migrate vlocation fields to 64-bit
afs: Prevent callback expiry timer overflow
afs: Fix the maths in afs_fs_store_data()
afs: Invalid op ID should abort with RXGEN_OPCODE
afs: Better abort and net error handling
afs: Populate and use client modification time
afs: Fix page leak in afs_write_begin()
afs: Fix afs_kill_pages()
afs: Fix abort on signal while waiting for call completion
nvme-loop: fix a possible use-after-free when destroying the admin queue
nvmet: confirm sq percpu has scheduled and switched to atomic
nvmet-rdma: Fix a possible uninitialized variable dereference
net/mlx4_core: Avoid delays during VF driver device shutdown
net: mpls: Fix nexthop alive tracking on down events
rxrpc: Ignore BUSY packets on old calls
tty: don't panic on OOM in tty_set_ldisc()
tty: fix data race in tty_ldisc_ref_wait()
perf symbols: Fix symbols__fixup_end heuristic for corner cases
efi/esrt: Cleanup bad memory map log messages
NFSv4.1 respect server's max size in CREATE_SESSION
btrfs: add missing memset while reading compressed inline extents
target: Use system workqueue for ALUA transitions
target: fix ALUA transition timeout handling
target: fix race during implicit transition work flushes
Revert "x86/acpi: Set persistent cpuid <-> nodeid mapping when booting"
HID: cp2112: fix broken gpio_direction_input callback
sfc: don't warn on successful change of MAC
fbdev: controlfb: Add missing modes to fix out of bounds access
video: udlfb: Fix read EDID timeout
video: fbdev: au1200fb: Release some resources if a memory allocation fails
video: fbdev: au1200fb: Return an error code if a memory allocation fails
rtc: pcf8563: fix output clock rate
ASoC: Intel: Skylake: Fix uuid_module memory leak in failure case
dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type
PCI/PME: Handle invalid data when reading Root Status
powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo
PCI: Do not allocate more buses than available in parent
iommu/mediatek: Fix driver name
netfilter: ipvs: Fix inappropriate output of procfs
powerpc/opal: Fix EBUSY bug in acquiring tokens
powerpc/ipic: Fix status get and status clear
platform/x86: intel_punit_ipc: Fix resource ioremap warning
target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()
iscsi-target: fix memory leak in lio_target_tiqn_addtpg()
target:fix condition return in core_pr_dump_initiator_port()
target/file: Do not return error for UNMAP if length is zero
badblocks: fix wrong return value in badblocks_set if badblocks are disabled
iommu/amd: Limit the IOVA page range to the specified addresses
xfs: truncate pagecache before writeback in xfs_setattr_size()
arm-ccn: perf: Prevent module unload while PMU is in use
crypto: tcrypt - fix buffer lengths in test_aead_speed()
mm: Handle 0 flags in _calc_vm_trans() macro
clk: mediatek: add the option for determining PLL source clock
clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU
clk: hi6220: mark clock cs_atb_syspll as critical
clk: tegra: Fix cclk_lp divisor register
ppp: Destroy the mutex when cleanup
ASoC: rsnd: rsnd_ssi_run_mods() needs to care ssi_parent_mod
thermal/drivers/step_wise: Fix temperature regulation misbehavior
scsi: scsi_debug: write_same: fix error report
GFS2: Take inode off order_write list when setting jdata flag
bcache: explicitly destroy mutex while exiting
bcache: fix wrong cache_misses statistics
Ib/hfi1: Return actual operational VLs in port info query
arm64: prevent regressions in compressed kernel image size when upgrading to binutils 2.27
btrfs: tests: Fix a memory leak in error handling path in 'run_test()'
platform/x86: hp_accel: Add quirk for HP ProBook 440 G4
nvme: use kref_get_unless_zero in nvme_find_get_ns
l2tp: cleanup l2tp_tunnel_delete calls
xfs: fix log block underflow during recovery cycle verification
xfs: fix incorrect extent state in xfs_bmap_add_extent_unwritten_real
RDMA/cxgb4: Declare stag as __be32
PCI: Detach driver before procfs & sysfs teardown on device remove
scsi: hpsa: cleanup sas_phy structures in sysfs when unloading
scsi: hpsa: destroy sas transport properties before scsi_host
powerpc/perf/hv-24x7: Fix incorrect comparison in memord
soc: mediatek: pwrap: fix compiler errors
tty fix oops when rmmod 8250
usb: musb: da8xx: fix babble condition handling
pinctrl: adi2: Fix Kconfig build problem
raid5: Set R5_Expanded on parity devices as well as data.
scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry
IB/core: Fix calculation of maximum RoCE MTU
vt6655: Fix a possible sleep-in-atomic bug in vt6655_suspend
rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_createbss_cmd
rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_disassoc_cmd
scsi: sd: change manage_start_stop to bool in sysfs interface
scsi: sd: change allow_restart to bool in sysfs interface
scsi: bfa: integer overflow in debugfs
udf: Avoid overflow when session starts at large offset
macvlan: Only deliver one copy of the frame to the macvlan interface
RDMA/cma: Avoid triggering undefined behavior
IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop
icmp: don't fail on fragment reassembly time exceeded
ath9k: fix tx99 potential info leak
Linux 4.9.71
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit fd567653bd ]
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.9.68
bcache: only permit to recovery read error when cache device is clean
bcache: recover data from backing when data is clean
drm/fsl-dcu: avoid disabling pixel clock twice on suspend
drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume()
Revert "crypto: caam - get rid of tasklet"
mm, oom_reaper: gather each vma to prevent leaking TLB entry
uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices
usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub
serial: 8250_pci: Add Amazon PCI serial device ID
s390/runtime instrumentation: simplify task exit handling
USB: serial: option: add Quectel BG96 id
ima: fix hash algorithm initialization
s390/pci: do not require AIS facility
selftests/x86/ldt_get: Add a few additional tests for limits
staging: greybus: loopback: Fix iteration count on async path
m68k: fix ColdFire node shift size calculation
serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()
staging: rtl8188eu: avoid a null dereference on pmlmepriv
spi: sh-msiof: Fix DMA transfer size check
spi: spi-axi: fix potential use-after-free after deregistration
mmc: sdhci-msm: fix issue with power irq
usb: phy: tahvo: fix error handling in tahvo_usb_probe()
serial: 8250: Preserve DLD[7:4] for PORT_XR17V35X
x86/entry: Use SYSCALL_DEFINE() macros for sys_modify_ldt()
EDAC, sb_edac: Fix missing break in switch
sysrq : fix Show Regs call trace on ARM
usbip: tools: Install all headers needed for libusbip development
perf test attr: Fix ignored test case result
kprobes/x86: Disable preemption in ftrace-based jprobes
tools include: Do not use poison with C++
iio: adc: ti-ads1015: add 10% to conversion wait time
dax: Avoid page invalidation races and unnecessary radix tree traversals
net/mlx4_en: Fix type mismatch for 32-bit systems
l2tp: take remote address into account in l2tp_ip and l2tp_ip6 socket lookups
dmaengine: stm32-dma: Set correct args number for DMA request from DT
dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status
usb: gadget: f_fs: Fix ExtCompat descriptor validation
libcxgb: fix error check for ip6_route_output()
net: systemport: Utilize skb_put_padto()
net: systemport: Pad packet before inserting TSB
ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate
ARM: OMAP1: DMA: Correct the number of logical channels
vti6: fix device register to report IFLA_INFO_KIND
be2net: fix accesses to unicast list
be2net: fix unicast list filling
net/appletalk: Fix kernel memory disclosure
libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount
net: qrtr: Mark 'buf' as little endian
mm: fix remote numa hits statistics
mac80211: calculate min channel width correctly
ravb: Remove Rx overflow log messages
nfs: Don't take a reference on fl->fl_file for LOCK operation
drm/exynos/decon5433: update shadow registers iff there are active windows
drm/exynos/decon5433: set STANDALONE_UPDATE_F also if planes are disabled
KVM: arm/arm64: Fix occasional warning from the timer work function
mac80211: prevent skb/txq mismatch
NFSv4: Fix client recovery when server reboots multiple times
perf/x86/intel: Account interrupts for PEBS errors
powerpc/mm: Fix memory hotplug BUG() on radix
qla2xxx: Fix wrong IOCB type assumption
drm/amdgpu: fix bug set incorrect value to vce register
drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement
net: sctp: fix array overrun read on sctp_timer_tbl
x86/fpu: Set the xcomp_bv when we fake up a XSAVES area
drm/amdgpu: fix unload driver issue for virtual display
mac80211: don't try to sleep in rate_control_rate_init()
RDMA/qedr: Return success when not changing QP state
RDMA/qedr: Fix RDMA CM loopback
tipc: fix nametbl_lock soft lockup at module exit
tipc: fix cleanup at module unload
dmaengine: pl330: fix double lock
tcp: correct memory barrier usage in tcp_check_space()
i2c: i2c-cadence: Initialize configuration before probing devices
nvmet: cancel fatal error and flush async work before free controller
gtp: clear DF bit on GTP packet tx
gtp: fix cross netns recv on gtp socket
net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause
net: thunderx: avoid dereferencing xcv when NULL
be2net: fix initial MAC setting
vfio/spapr: Fix missing mutex unlock when creating a window
mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers
xen-netfront: Improve error handling during initialization
cec: initiator should be the same as the destination for, poll
xen-netback: vif counters from int/long to u64
net: fec: fix multicast filtering hardware setup
dma-buf/dma-fence: Extract __dma_fence_is_later()
dma-buf/sw-sync: Fix the is-signaled test to handle u32 wraparound
dma-buf/sw-sync: Prevent user overflow on timeline advance
dma-buf/sw-sync: Reduce irqsave/irqrestore from known context
dma-buf/sw-sync: sync_pt is private and of fixed size
dma-buf/sw-sync: Fix locking around sync_timeline lists
dma-buf/sw-sync: Use an rbtree to sort fences in the timeline
dma-buf/sw_sync: move timeline_fence_ops around
dma-buf/sw_sync: clean up list before signaling the fence
dma-fence: Clear fence->status during dma_fence_init()
dma-fence: Wrap querying the fence->status
dma-fence: Introduce drm_fence_set_error() helper
dma-buf/sw_sync: force signal all unsignaled fences on dying timeline
dma-buf/sync_file: hold reference to fence when creating sync_file
dma-buf: Update kerneldoc for sync_file_create
usb: hub: Cycle HUB power when initialization fails
usb: xhci: fix panic in xhci_free_virt_devices_depth_first
USB: core: Add type-specific length check of BOS descriptors
USB: Increase usbfs transfer limit
USB: devio: Prevent integer overflow in proc_do_submiturb()
USB: usbfs: Filter flags passed in from user space
usb: host: fix incorrect updating of offset
xen-netfront: avoid crashing on resume after a failure in talk_to_netback()
Linux 4.9.68
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit ce035409bf ]
If devm_extcon_dev_allocate() fails, we should disable clk before return.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 860d2686fd ("usb: phy: tahvo: Use devm_extcon_dev_[allocate|register]() and replace deprecated API")
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a missing ";" after EXPORT_SYMBOL() otherwise we run
into following build error if Kernel Modules are supported:
----------
CC drivers/usb/phy/class-dual-role.o
drivers/usb/phy/class-dual-role.c:91:1: error: expected ',' or ';' before 'int'
int dual_role_get_property(struct dual_role_phy_instance *dual_role,
^
make[3]: *** [drivers/usb/phy/class-dual-role.o] Error 1
----------
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
This CL adds a new class to monitor and change
dual role usb ports from userspace. The usb
phy drivers can register to the dual_role_usb
class and expose the capabilities of the ports.
The phy drivers can decide on whether a specific
attribute can be changed from userspace by
choosing to implement the appropriate callback.
Cherry-picked from
https://android-review.googlesource.com/#/c/167310/
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Bug: 21615151
Change-Id: Id1c4aaa97e898264d7006381a7badd029b5d9789
commit 015105b121 upstream.
Make sure to drop the references taken by of_parse_phandle() and
bus_find_device() before returning from am335x_get_phy_control().
Note that there is no guarantee that the devres-managed struct
phy_control will be valid for the lifetime of the sibling phy device
regardless of this change.
Fixes: 3bb869c8b3 ("usb: phy: Add AM335x PHY driver")
Acked-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe writes:
usb: patches for v4.9 merge window
This time around we have 92 non-merge commits. Most
of the changes are in drivers/usb/gadget (40.3%)
with drivers/usb/gadget/function being the most
active directory (27.2%).
As for UDC drivers, only dwc3 (26.5%) and dwc2
(12.7%) have really been active.
The most important changes for dwc3 are better
support for scatterlist and, again, throughput
improvements. While on dwc2 got some minor stability
fixes related to soft reset and FIFO usage.
Felipe Tonello has done some good work fixing up our
f_midi gadget and Tal Shorer has implemented a nice
API change for our ULPI bus.
Apart from these, we have our usual set of
non-critical fixes, spelling fixes, build warning
fixes, etc.
clk_prepare_enable() may fail, so we should better check its return
value and propagate it in the case of failure.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
The TX settings can be calibrated for particular hardware. The
phy is reset by Linux, so this cannot be handled by the bootloader.
The TRM mentions that the maximum resistance should be used for the
DN/DP calibration in order to pass USB certification.
The values for the TX registers are poorly described in the TRM.
The meanings of the register values were taken from another
NXP-provided document:
https://community.nxp.com/message/566147#comment-566912
Acked-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jaret Cantu <jaret.cantu@timesys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
As the last known user, ie. pxa27x_udc relying on calls to
usb_gadget_xxx() was amended to use the phy notifier, remove a bit the
USB stack adherence.
Actually the driver still uses the gadget API for structures definition,
but the implementation of USB gadget specific function usb_gadget_*() is
not necessary anymore.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
In the gpio based case, the status of the phy is known at start by
reading the VBus gpio.
Actually, this is a fix, as this initial state, when not set up,
prevents a gadget to answer to the enumeration phase, as there is no
notification in this case (the VBus is already high when kernel boots)
so no interrupt is triggered, and the flow is :
- gadget initializes
- gadget gets its phy-generic with a xxx_get_phy_xxx() call type
- gadget does a "set_peripheral()" call type
=> here if the otg->state is correctly filled, the proper vbus
handling will be called, and the gadget will be aware it should
answer enumeration and go forth
Without this fix, the USB cable must be removed and replugged for any
gadget relying on phy-generic and its gpio vbus handling to work.
The problem was seen on a pxa27x architecture based board on a
devicetree build.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Add missing platform_set_drvdata() in omap_otg_probe(), otherwise
calling platform_get_drvdata() in remove returns NULL.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
As a preparation for another cleanup, this moves the header file
for the phy-msm-usb driver into the driver itself. No other file
includes it any more, and we don't really want it in the global
namespace anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Some SoCs have a single phy-hw-block with multiple phys, this is
modelled by a single phy dts node, so we end up with multiple
controller nodes with a phys property pointing to the phy-node
of the otg-phy.
Only one of these controllers typically is an otg controller, yet we
were checking the first controller who uses a phy from the block and
then end up looking for a dr_mode property in e.g. the ehci controller.
This commit fixes this by adding an arg0 parameter to
of_usb_get_dr_mode_by_phy and make of_usb_get_dr_mode_by_phy
check that this matches the phandle args[0] value when looking for
the otg controller.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
instead of defining all functions as static inlines,
let's move them to udc-core and export them with
EXPORT_SYMBOL_GPL, that way we can make sure that
only GPL drivers will use them.
As a side effect, it'll be nicer to add tracepoints
to the gadget API.
While at that, also fix Kconfig dependencies to
avoid randconfig build failures.
Acked-By: Sebastian Reichel <sre@kernel.org>
Acked-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
We need to check the state for the PHY with delayed_work
as otherwise MUSB will get confused and idles immediately.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At least on n900 we have phy-twl4030-usb only generating cable
interrupts, and then have a separate USB PHY.
In order for musb to know the real cable status, we need to
clear any cached state until musb is ready. Otherwise the cable
status interrupts will get just ignored if the status does
not change from the initial state.
To do this, let's add a return value to musb_mailbox(), and
reset cached linkstat to MUSB_UNKNOWN on error. Sorry to cause
a bit of churn here, I should have added that already last time
patching musb_mailbox().
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coccicheck found this pattern which could be
converted to PTR_ERR_OR_ZERO(). No functional
changes.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
gcc warns about the use of regulators in phy_8x16_probe:
drivers/usb/phy/phy-qcom-8x16-usb.c: In function 'phy_8x16_probe':
drivers/usb/phy/phy-qcom-8x16-usb.c:284:13: error: 'regs[0].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/usb/phy/phy-qcom-8x16-usb.c:285:13: error: 'regs[1].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/usb/phy/phy-qcom-8x16-usb.c:286:12: error: 'regs[2].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized]
According to Mark Brown, this is the result of various abuses
of the PHY interfaces [1], so let's fix the driver instead.
This puts the regulator bulk data into the device structure so it
gets properly initialized and lets us call regulator_bulk_enable()
and regulator_bulk_disable() rather than open-coding them.
Setting the voltages the way the driver does is rather pointless
because for each regulator there is only one valid voltage
range, so that can just get set up in the DT. As there doesn't
seem to be any user of the newly added driver yet, we can simply
make sure the DTs are setting this up right when they get added.
I'm also fixing the handling of regulator_bulk_enable() failure.
Right now, the driver just ignores any failure, which doesn't make
sense, so I'm changing it to loudly complain (in case we actually
had a bug here) and error out.
Doing a fly-by review of the driver, I notice a couple of other
problems that I'm not addressing here:
- It really should not have been written as a USB PHY driver, but
instead should use the PHY subsystem.
- The DT compatible string does not follow the usual conventions,
and it should have a proper identifier in it rather than a wildcard.
- The example in the devicetree binding lists a register address
that is the same as the actual EHCI host controller in the SoC
as well as the otg-snps and the ci-hdrc device, which indicates
that these are probably not even distinct devices (or all but
one of them are wrong), and if more than one of them tries to
request the resources correctly, they fail.
[1] https://lkml.org/lkml/2016/1/26/267
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
It is possible for the VBUS detect GPIO interrupt to occur before
nop_set_peripheral() is called, in which case otg->gadget is NULL.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
phy-am335x.c doesn't use any interfaces from linux/regulator/consumer.h, so
stop including it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The power_up function is used for otg or udc mode, but nost when
the driver is only configured for host mode:
drivers/usb/phy/phy-isp1301-omap.c:261:13: error: 'power_up' defined but not used [-Werror=unused-function]
This marks the function __maybe_unused to avoid the warning and
silently drop the definition when it is unused.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
When working in Dual Role Device mode, USB state machine is not kicked,
when host or gadget drivers are loaded. Fix this be explicitly triggering
state detection on client driver load.
Issue is that if the board is booted without micro usb cable and usb
device attached, kernel fails to populate the usb host and device.
The reason for this is that the state machine worker logic only checks
for USB_DR_MODE_PERIPHERAL and USB_DR_MODE_HOST modes to run worker
thread. However if the phy is configured in OTG mode it would fail
to run the state machine, resulting in failure to detect for very
first time.
This patch fixes the issue by removing the explicit checks.
Issue is noticed on Qualcomm Dragon board DB410C.
[srinivas.kandagatla@linaro.org: Added more details to log]
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Initialize vbus_value to be 0 since it's possible not to assign
any value before judgement.
Acked-by: Peter Chen <peter.chen@nxp.com
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This driver registers for extcon events as part of its probe, but
never unregisters them in case of error in the probe path.
There were multiple issues noticed due to this missing error handling.
One of them is random crashes if the regulators are not ready yet by the
time probe is invoked.
Ivan's previous attempt [1] to fix this issue, did not really address
all the failure cases like regualtor/get_irq failures.
[1] https://lkml.org/lkml/2015/9/7/62
Without this patch the kernel would carsh with log:
...
Unable to handle kernel paging request at virtual address 17d78410
pgd = ffffffc001a5c000
[17d78410] *pgd=00000000b6806003, *pud=00000000b6806003, *pmd=0000000000000000
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.4.0+ #48
Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
Workqueue: deferwq deferred_probe_work_func
task: ffffffc03686e900 ti: ffffffc0368b0000 task.ti: ffffffc0368b0000
PC is at raw_notifier_chain_register+0x1c/0x44
LR is at extcon_register_notifier+0x88/0xc8
pc : [<ffffffc0000da43c>] lr : [<ffffffc000606298>] pstate: 80000085
sp : ffffffc0368b3a70
x29: ffffffc0368b3a70 x28: ffffffc03680c310
x27: ffffffc035518000 x26: ffffffc035518000
x25: ffffffc03bfa20e0 x24: ffffffc035580a18
x23: 0000000000000000 x22: ffffffc035518458
x21: ffffffc0355e9a60 x20: ffffffc035518000
x19: 0000000000000000 x18: 0000000000000028
x17: 0000000000000003 x16: ffffffc0018153c8
x15: 0000000000000001 x14: ffffffc03686f0f8
x13: ffffffc03686f0f8 x12: 0000000000000003
x11: 0000000000000001 x10: 0000000000000001
x9 : ffffffc03686f0f8 x8 : 0000e3872014c1a1
x7 : 0000000000000028 x6 : 0000000000000000
x5 : 0000000000000001 x4 : 0000000000000000
x3 : 00000000354fb170 x2 : 0000000017d78400
x1 : ffffffc0355e9a60 x0 : ffffffc0354fb268
Fixes: 591fc116f3 ("usb: phy: msm: Use extcon framework for VBUS and ID detection")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
We currently can't unload omap2430 MUSB platform glue driver module and
this cause issues for fixing the MUSB code further. The reason we can't
remove omap2430 is because it uses the PHY functions and also exports the
omap_musb_mailbox function that some PHY drivers are using.
Let's fix the issue by exporting a more generic musb_mailbox function
from the MUSB core and allow platform glue layers to register phy_callback
function as needed.
And now we can now also get rid of the include/linux/musb-omap.h.
Cc: Bin Liu <b-liu@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: NeilBrown <neil@brown.name>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
To prevent VBUS contention, the am335x MUSB phy senses VBUS first before
transitioning to host mode. However, for host-only mode, VBUS could be
directly tied to 5V power rail which could prevent MUSB transitions to
host mode.
This change receives dr_mode of the controller then bypass the first
VBUS sensing for host-only mode, so that MUSB can work in host mode
event if VBUS is tied to 5V.
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The filename of am35x-phy-control.h is confusing. The header is used
by the am335x phy driver, but the filename refers to am35x. Even worse
there is indeed another device called am35x but it does not use this
header at all.
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
