commit 80ef08670d upstream.
A request could end up on the fpq->io list after fuse_abort_conn() has
reset fpq->connected and aborted requests on that list:
Thread-1 Thread-2
======== ========
->fuse_simple_request() ->shutdown
->__fuse_request_send()
->queue_request() ->fuse_abort_conn()
->fuse_dev_do_read() ->acquire(fpq->lock)
->wait_for(fpq->lock) ->set err to all req's in fpq->io
->release(fpq->lock)
->acquire(fpq->lock)
->add req to fpq->io
After the userspace copy is done the request will be ended, but
req->out.h.error will remain uninitialized. Also the copy might block
despite being already aborted.
Fix both issues by not allowing the request to be queued on the fpq->io
list after fuse_abort_conn() has processed this list.
Reported-by: Pradeep P V K <pragalla@codeaurora.org>
Fixes: fd22d62ed0 ("fuse: no fc->lock for iqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8217673d07 ]
For cloned connections cuse_channel_release() will be called more than
once, resulting in use after free.
Prevent device cloning for CUSE, which does not make sense at this point,
and highly unlikely to be used in real life.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d78092e493 upstream.
After unlock_request() pages from the ap->pages[] array may be put (e.g. by
aborting the connection) and the pages can be freed.
Prevent use after free by grabbing a reference to the page before calling
unlock_request().
The original patch was created by Pradeep P V K.
Reported-by: Pradeep P V K <ppvk@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 32f98877c5 ]
page_count() is unstable. Unless there has been an RCU grace period
between when the page was removed from the page cache and now, a
speculative reference may exist from the page cache.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 31070f6cce upstream.
The ioctl encoding for this parameter is a long but the documentation says
it should be an int and the kernel drivers expect it to be an int. If the
fuse driver treats this as a long it might end up scribbling over the stack
of a userspace process that only allocated enough space for an int.
This was previously discussed in [1] and a patch for fuse was proposed in
[2]. From what I can tell the patch in [2] was nacked in favor of adding
new, "fixed" ioctls and using those from userspace. However there is still
no "fixed" version of these ioctls and the fact is that it's sometimes
infeasible to change all userspace to use the new one.
Handling the ioctls specially in the fuse driver seems like the most
pragmatic way for fuse servers to support them without causing crashes in
userspace applications that call them.
[1]: https://lore.kernel.org/linux-fsdevel/20131126200559.GH20559@hall.aurel32.net/T/
[2]: https://sourceforge.net/p/fuse/mailman/message/31771759/
Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Fixes: 59efec7b90 ("fuse: implement ioctl support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d84a2d19b upstream.
In current fuse_drop_waiting() implementation it's possible that
fuse_wait_aborted() will not be woken up in the unlikely case that
fuse_abort_conn() + fuse_wait_aborted() runs in between checking
fc->connected and calling atomic_dec(&fc->num_waiting).
Do the atomic_dec_and_test() unconditionally, which also provides the
necessary barrier against reordering with the fc->connected check.
The explicit smp_mb() in fuse_wait_aborted() is not actually needed, since
the spin_unlock() in fuse_abort_conn() provides the necessary RELEASE
barrier after resetting fc->connected. However, this is not a performance
sensitive path, and adding the explicit barrier makes it easier to
document.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: b8f95e5d13 ("fuse: umount should wait for all requests")
Cc: <stable@vger.kernel.org> #v4.19
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb59bd17d2 upstream.
If a filesystem returns negative inode sizes, future reads on the file were
causing the cpu to spin on truncate_pagecache.
Create a helper to validate the attributes. This now does two things:
- check the file mode
- check if the file size fits in i_size without overflowing
Reported-by: Arijit Banerjee <arijit@rubrik.com>
Fixes: d8a5ba4545 ("[PATCH] FUSE - core")
Cc: <stable@vger.kernel.org> # v2.6.14
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2a23f2b8ad ]
Since they are of unsigned int type, it's allowed to read them
unlocked during reporting to userspace. Let's underline this fact
with READ_ONCE() macroses.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b24e7598db upstream.
If writeback cache is enabled, then writes might get reordered with
chmod/chown/utimes. The problem with this is that performing the write in
the fuse daemon might itself change some of these attributes. In such case
the following sequence of operations will result in file ending up with the
wrong mode, for example:
int fd = open ("suid", O_WRONLY|O_CREAT|O_EXCL);
write (fd, "1", 1);
fchown (fd, 0, 0);
fchmod (fd, 04755);
close (fd);
This patch fixes this by flushing pending writes before performing
chown/chmod/utimes.
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Fixes: 4d99ff8f12 ("fuse: Turn writeback cache on")
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7640682e67 ]
FUSE filesystem server and kernel client negotiate during initialization
phase, what should be the maximum write size the client will ever issue.
Correspondingly the filesystem server then queues sys_read calls to read
requests with buffer capacity large enough to carry request header + that
max_write bytes. A filesystem server is free to set its max_write in
anywhere in the range between [1*page, fc->max_pages*page]. In particular
go-fuse[2] sets max_write by default as 64K, wheres default fc->max_pages
corresponds to 128K. Libfuse also allows users to configure max_write, but
by default presets it to possible maximum.
If max_write is < fc->max_pages*page, and in NOTIFY_RETRIEVE handler we
allow to retrieve more than max_write bytes, corresponding prepared
NOTIFY_REPLY will be thrown away by fuse_dev_do_read, because the
filesystem server, in full correspondence with server/client contract, will
be only queuing sys_read with ~max_write buffer capacity, and
fuse_dev_do_read throws away requests that cannot fit into server request
buffer. In turn the filesystem server could get stuck waiting indefinitely
for NOTIFY_REPLY since NOTIFY_RETRIEVE handler returned OK which is
understood by clients as that NOTIFY_REPLY was queued and will be sent
back.
Cap requested size to negotiate max_write to avoid the problem. This
aligns with the way NOTIFY_RETRIEVE handler works, which already
unconditionally caps requested retrieve size to fuse_conn->max_pages. This
way it should not hurt NOTIFY_RETRIEVE semantic if we return less data than
was originally requested.
Please see [1] for context where the problem of stuck filesystem was hit
for real, how the situation was traced and for more involving patch that
did not make it into the tree.
[1] https://marc.info/?l=linux-fsdevel&m=155057023600853&w=2
[2] https://github.com/hanwen/go-fuse
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Cc: Jakob Unterwurzacher <jakobunt@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bbd84f3365 upstream.
Starting from commit 9c225f2655 ("vfs: atomic f_pos accesses as per
POSIX") files opened even via nonseekable_open gate read and write via lock
and do not allow them to be run simultaneously. This can create read vs
write deadlock if a filesystem is trying to implement a socket-like file
which is intended to be simultaneously used for both read and write from
filesystem client. See commit 10dce8af34 ("fs: stream_open - opener for
stream-like files so that read and write can run simultaneously without
deadlock") for details and e.g. commit 581d21a2d0 ("xenbus: fix deadlock
on writes to /proc/xen/xenbus") for a similar deadlock example on
/proc/xen/xenbus.
To avoid such deadlock it was tempting to adjust fuse_finish_open to use
stream_open instead of nonseekable_open on just FOPEN_NONSEEKABLE flags,
but grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
and in particular GVFS which actually uses offset in its read and write
handlers
https://codesearch.debian.net/search?q=-%3Enonseekable+%3Dhttps://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481
so if we would do such a change it will break a real user.
Add another flag (FOPEN_STREAM) for filesystem servers to indicate that the
opened handler is having stream-like semantics; does not use file position
and thus the kernel is free to issue simultaneous read and write request on
opened file handle.
This patch together with stream_open() should be added to stable kernels
starting from v3.14+. This will allow to patch OSSPD and other FUSE
filesystems that provide stream-like files to return FOPEN_STREAM |
FOPEN_NONSEEKABLE in open handler and this way avoid the deadlock on all
kernel versions. This should work because fuse_finish_open ignores unknown
open flags returned from a filesystem and so passing FOPEN_STREAM to a
kernel that is not aware of this flag cannot hurt. In turn the kernel that
is not aware of FOPEN_STREAM will be < v3.14 where just FOPEN_NONSEEKABLE
is sufficient to implement streams without read vs write deadlock.
Cc: stable@vger.kernel.org # v3.14+
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15fab63e1e upstream.
Change pipe_buf_get() to return a bool indicating whether it succeeded
in raising the refcount of the page (if the thing in the pipe is a page).
This removes another mechanism for overflowing the page refcount. All
callers converted to handle a failure.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9de5be06d0 upstream.
Writepage requests were cropped to i_size & 0xffffffff, which meant that
mmaped writes to any file larger than 4G might be silently discarded.
Fix by storing the file size in a properly sized variable (loff_t instead
of size_t).
Reported-by: Antonio SJ Musumeci <trapexit@spawn.link>
Fixes: 6eaf4782eb ("fuse: writepages: crop secondary requests")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9509941e9c upstream.
Some of the pipe_buf_release() handlers seem to assume that the pipe is
locked - in particular, anon_pipe_buf_release() accesses pipe->tmp_page
without taking any extra locks. From a glance through the callers of
pipe_buf_release(), it looks like FUSE is the only one that calls
pipe_buf_release() without having the pipe locked.
This bug should only lead to a memory leak, nothing terrible.
Fixes: dd3bb14f44 ("fuse: support splice() writing to fuse device")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fabaf3034 upstream.
fuse_request_send_notify_reply() may fail if the connection was reset for
some reason (e.g. fs was unmounted). Don't leak request reference in this
case. Besides leaking memory, this resulted in fc->num_waiting not being
decremented and hence fuse_wait_aborted() left in a hanging and unkillable
state.
Fixes: 2d45ba381a ("fuse: add retrieve request")
Fixes: b8f95e5d13 ("fuse: umount should wait for all requests")
Reported-and-tested-by: syzbot+6339eda9cb4ebbc4c37b@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> #v2.6.36
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebacb81273 upstream.
In async IO blocking case the additional reference to the io is taken for
it to survive fuse_aio_complete(). In non blocking case this additional
reference is not needed, however we still reference io to figure out
whether to wait for completion or not. This is wrong and will lead to
use-after-free. Fix it by storing blocking information in separate
variable.
This was spotted by KASAN when running generic/208 fstest.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 744742d692 ("fuse: Add reference counting for fuse_io_priv")
Cc: <stable@vger.kernel.org> # v4.6
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 908a572b80 upstream.
Using waitqueue_active() is racy. Make sure we issue a wake_up()
unconditionally after storing into fc->blocked. After that it's okay to
optimize with waitqueue_active() since the first wake up provides the
necessary barrier for all waiters, not the just the woken one.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 3c18ef8117 ("fuse: optimize wake_up")
Cc: <stable@vger.kernel.org> # v3.10
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8f95e5d13 upstream.
fuse_abort_conn() does not guarantee that all async requests have actually
finished aborting (i.e. their ->end() function is called). This could
actually result in still used inodes after umount.
Add a helper to wait until all requests are fully done. This is done by
looking at the "num_waiting" counter. When this counter drops to zero, we
can be sure that no more requests are outstanding.
Fixes: 0d8e84b043 ("fuse: simplify request abort")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45ff350bbd upstream.
fuse_dev_release() assumes that it's the only one referencing the
fpq->processing list, but that's not true, since fuse_abort_conn() can be
doing the same without any serialization between the two.
Fixes: c3696046be ("fuse: separate pqueue for clones")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87114373ea upstream.
Refcounting of request is broken when fuse_abort_conn() is called and
request is on the fpq->io list:
- ref is taken too late
- then it is not dropped
Fixes: 0d8e84b043 ("fuse: simplify request abort")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2477b0e67 upstream.
fuse_dev_splice_write() reads pipe->buffers to determine the size of
'bufs' array before taking the pipe_lock(). This is not safe as
another thread might change the 'pipe->buffers' between the allocation
and taking the pipe_lock(). So we end up with too small 'bufs' array.
Move the bufs allocations inside pipe_lock()/pipe_unlock() to fix this.
Fixes: dd3bb14f44 ("fuse: support splice() writing to fuse device")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.9.111
x86/spectre_v1: Disable compiler optimizations over array_index_mask_nospec()
x86/mce: Improve error message when kernel cannot recover
x86/mce: Check for alternate indication of machine check recovery on Skylake
x86/mce: Fix incorrect "Machine check from unknown source" message
x86/mce: Do not overwrite MCi_STATUS in mce_no_way_out()
x86: Call fixup_exception() before notify_die() in math_error()
m68k/mm: Adjust VM area to be unmapped by gap size for __iounmap()
serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding version
signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
usb: do not reset if a low-speed or full-speed device timed out
1wire: family module autoload fails because of upper/lower case mismatch.
ASoC: dapm: delete dapm_kcontrol_data paths list before freeing it
ASoC: cirrus: i2s: Fix LRCLK configuration
ASoC: cirrus: i2s: Fix {TX|RX}LinCtrlData setup
clk: renesas: cpg-mssr: Stop using printk format %pCr
lib/vsprintf: Remove atomic-unsafe support for %pCr
mips: ftrace: fix static function graph tracing
branch-check: fix long->int truncation when profiling branches
ipmi:bt: Set the timeout before doing a capabilities check
Bluetooth: hci_qca: Avoid missing rampatch failure with userspace fw loader
fuse: atomic_o_trunc should truncate pagecache
fuse: don't keep dead fuse_conn at fuse_fill_super().
fuse: fix control dir setup and teardown
powerpc/mm/hash: Add missing isync prior to kernel stack SLB switch
powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREG
powerpc/ptrace: Fix enforcement of DAWR constraints
powerpc/powernv/ioda2: Remove redundant free of TCE pages
cpuidle: powernv: Fix promotion from snooze if next state disabled
powerpc/fadump: Unregister fadump on kexec down path.
ARM: 8764/1: kgdb: fix NUMREGBYTES so that gdb_regs[] is the correct size
arm64: kpti: Use early_param for kpti= command-line option
arm64: mm: Ensure writes to swapper are ordered wrt subsequent cache maintenance
of: unittest: for strings, account for trailing \0 in property length field
IB/qib: Fix DMA api warning with debug kernel
IB/{hfi1, qib}: Add handling of kernel restart
IB/mlx5: Fetch soft WQE's on fatal error state
IB/isert: Fix for lib/dma_debug check_sync warning
IB/isert: fix T10-pi check mask setting
RDMA/mlx4: Discard unknown SQP work requests
mtd: cfi_cmdset_0002: Change write buffer to check correct value
mtd: cfi_cmdset_0002: Use right chip in do_ppb_xxlock()
mtd: cfi_cmdset_0002: fix SEGV unlocking multiple chips
mtd: cfi_cmdset_0002: Fix unlocking requests crossing a chip boudary
mtd: cfi_cmdset_0002: Avoid walking all chips when unlocking.
MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum
PCI: Add ACS quirk for Intel 7th & 8th Gen mobile
PCI: Add ACS quirk for Intel 300 series
PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume
printk: fix possible reuse of va_list variable
MIPS: io: Add barrier after register read in inX()
time: Make sure jiffies_to_msecs() preserves non-zero time periods
X.509: unpack RSA signatureValue field from BIT STRING
Btrfs: fix return value on rename exchange failure
Btrfs: fix unexpected cow in run_delalloc_nocow
iio:buffer: make length types match kfifo types
scsi: qla2xxx: Fix setting lower transfer speed if GPSC fails
scsi: zfcp: fix missing SCSI trace for result of eh_host_reset_handler
scsi: zfcp: fix missing SCSI trace for retry of abort / scsi_eh TMF
scsi: zfcp: fix misleading REC trigger trace where erp_action setup failed
scsi: zfcp: fix missing REC trigger trace on terminate_rport_io early return
scsi: zfcp: fix missing REC trigger trace on terminate_rport_io for ERP_FAILED
scsi: zfcp: fix missing REC trigger trace for all objects in ERP_FAILED
scsi: zfcp: fix missing REC trigger trace on enqueue without ERP thread
linvdimm, pmem: Preserve read-only setting for pmem devices
clk: at91: PLL recalc_rate() now using cached MUL and DIV values
md: fix two problems with setting the "re-add" device state.
rpmsg: smd: do not use mananged resources for endpoints and channels
ubi: fastmap: Cancel work upon detach
ubi: fastmap: Correctly handle interrupted erasures in EBA
UBIFS: Fix potential integer overflow in allocation
backlight: as3711_bl: Fix Device Tree node lookup
backlight: max8925_bl: Fix Device Tree node lookup
backlight: tps65217_bl: Fix Device Tree node lookup
mfd: intel-lpss: Program REMAP register in PIO mode
perf tools: Fix symbol and object code resolution for vdso32 and vdsox32
perf intel-pt: Fix sync_switch INTEL_PT_SS_NOT_TRACING
perf intel-pt: Fix decoding to accept CBR between FUP and corresponding TIP
perf intel-pt: Fix MTC timing after overflow
perf intel-pt: Fix "Unexpected indirect branch" error
perf intel-pt: Fix packet decoding of CYC packets
media: v4l2-compat-ioctl32: prevent go past max size
media: cx231xx: Add support for AverMedia DVD EZMaker 7
media: dvb_frontend: fix locking issues at dvb_frontend_get_event()
nfsd: restrict rd_maxcount to svc_max_payload in nfsd_encode_readdir
NFSv4: Fix possible 1-byte stack overflow in nfs_idmap_read_and_verify_message
NFSv4: Revert commit 5f83d86cf5 ("NFSv4.x: Fix wraparound issues..")
video: uvesafb: Fix integer overflow in allocation
Input: elan_i2c - add ELAN0618 (Lenovo v330 15IKB) ACPI ID
pwm: lpss: platform: Save/restore the ctrl register over a suspend/resume
rbd: flush rbd_dev->watch_dwork after watch is unregistered
mm: fix devmem_is_allowed() for sub-page System RAM intersections
xen: Remove unnecessary BUG_ON from __unbind_from_irq()
udf: Detect incorrect directory size
Input: elan_i2c_smbus - fix more potential stack buffer overflows
Input: elantech - enable middle button of touchpads on ThinkPad P52
Input: elantech - fix V4 report decoding for module with middle key
ALSA: hda/realtek - Fix pop noise on Lenovo P50 & co
ALSA: hda/realtek - Add a quirk for FSC ESPRIMO U9210
block: Fix transfer when chunk sectors exceeds max
dm thin: handle running out of data space vs concurrent discard
cdc_ncm: avoid padding beyond end of skb
Linux 4.9.111
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit df0e91d488 upstream.
Fuse has an "atomic_o_trunc" mode, where userspace filesystem uses the
O_TRUNC flag in the OPEN request to truncate the file atomically with the
open.
In this mode there's no need to send a SETATTR request to userspace after
the open, so fuse_do_setattr() checks this mode and returns. But this
misses the important step of truncating the pagecache.
Add the missing parts of truncation to the ATTR_OPEN branch.
Reported-by: Chad Austin <chadaustin@fb.com>
Fixes: 6ff958edbf ("fuse: add atomic open+truncate support")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
page allocated in fuse_dentry_canonical_path to be handled in
fuse_dev_do_write is allocated using __get_free_pages(GFP_KERNEL).
This may not return a page with data filled with 0. Now this
page may not have a null terminator at all.
If this happens and userspace fuse daemon screws up by passing a string
to kernel which is not NULL terminated (or did not fill anything),
then inside fuse driver in kernel when we try to do
strlen(fuse_dev_write->kern_path->getname_kernel)
on that page data -> it may give us issue with kernel paging request.
Unable to handle kernel paging request at virtual address
------------[ cut here ]------------
<..>
PC is at strlen+0x10/0x90
LR is at getname_kernel+0x2c/0xf4
<..>
strlen+0x10/0x90
kern_path+0x28/0x4c
fuse_dev_do_write+0x5b8/0x694
fuse_dev_write+0x74/0x94
do_iter_readv_writev+0x80/0xb8
do_readv_writev+0xec/0x1cc
vfs_writev+0x54/0x64
SyS_writev+0x64/0xe4
el0_svc_naked+0x24/0x28
To avoid this we should ensure in case of FUSE_CANONICAL_PATH,
the page is null terminated.
Change-Id: I33ca7cc76b4472eaa982c67bb20685df451121f5
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Bug: 75984715
[Daniel - small edit, using args size ]
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:
@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@
module_param_call(_name, _set_func, _get_func, _arg, _mode);
@fix_set_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _set_func(
-_val_type _val
+const char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
@fix_get_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _get_func(
-_val_type _val
+char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:
drivers/platform/x86/thinkpad_acpi.c
fs/lockd/svc.c
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Bug: 67506682
Change-Id: I2c9c0ee8ed28065e63270a52c155e5e7d2791295
(cherry picked from commit e4dca7b7aa)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Changes in 4.9.60
workqueue: replace pool->manager_arb mutex with a flag
ALSA: hda/realtek - Add support for ALC236/ALC3204
ALSA: hda - fix headset mic problem for Dell machines with alc236
ceph: unlock dangling spinlock in try_flush_caps()
usb: xhci: Handle error condition in xhci_stop_device()
KVM: PPC: Fix oops when checking KVM_CAP_PPC_HTM
spi: uapi: spidev: add missing ioctl header
spi: bcm-qspi: Fix use after free in bcm_qspi_probe() in error path
fuse: fix READDIRPLUS skipping an entry
xen/gntdev: avoid out of bounds access in case of partial gntdev_mmap()
Input: elan_i2c - add ELAN0611 to the ACPI table
Input: gtco - fix potential out-of-bound access
assoc_array: Fix a buggy node-splitting case
scsi: zfcp: fix erp_action use-before-initialize in REC action trace
scsi: sg: Re-fix off by one in sg_fill_request_table()
drm/amd/powerplay: fix uninitialized variable
can: sun4i: fix loopback mode
can: kvaser_usb: Correct return value in printout
can: kvaser_usb: Ignore CMD_FLUSH_QUEUE_REPLY messages
cfg80211: fix connect/disconnect edge cases
ipsec: Fix aborted xfrm policy dump crash
regulator: fan53555: fix I2C device ids
ecryptfs: fix dereference of NULL user_key_payload
Linux 4.9.60
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit c6cdd51404 upstream.
Marios Titas running a Haskell program noticed a problem with fuse's
readdirplus: when it is interrupted by a signal, it skips one directory
entry.
The reason is that fuse erronously updates ctx->pos after a failed
dir_emit().
The issue originates from the patch adding readdirplus support.
Reported-by: Jakob Unterwurzacher <jakobunt@gmail.com>
Tested-by: Marios Titas <redneb@gmx.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 0b05b18381 ("fuse: implement NFS-like readdirplus support")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.9.44
mm: ratelimit PFNs busy info message
mm: fix list corruptions on shmem shrinklist
futex: Remove unnecessary warning from get_futex_key
xtensa: fix cache aliasing handling code for WT cache
xtensa: mm/cache: add missing EXPORT_SYMBOLs
xtensa: don't limit csum_partial export by CONFIG_NET
mtd: nand: Fix timing setup for NANDs that do not support SET FEATURES
iscsi-target: fix memory leak in iscsit_setup_text_cmd()
iscsi-target: Fix iscsi_np reset hung task during parallel delete
target: Fix node_acl demo-mode + uncached dynamic shutdown regression
fuse: initialize the flock flag in fuse_file on allocation
nand: fix wrong default oob layout for small pages using soft ecc
mmc: mmc: correct the logic for setting HS400ES signal voltage
nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays
drm/etnaviv: Fix off-by-one error in reloc checking
drm/i915: Fix out-of-bounds array access in bdw_load_gamma_lut
USB: serial: option: add D-Link DWM-222 device ID
USB: serial: cp210x: add support for Qivicon USB ZigBee dongle
USB: serial: pl2303: add new ATEN device id
usb: musb: fix tx fifo flush handling again
USB: hcd: Mark secondary HCD as dead if the primary one died
staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read
iio: accel: bmc150: Always restore device to normal mode after suspend-resume
iio: light: tsl2563: use correct event code
staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING
uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069
usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling
usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3
USB: Check for dropped connection before switching to full speed
usb: core: unlink urbs from the tail of the endpoint's urb_list
usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter
usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume
iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits
pnfs/blocklayout: require 64-bit sector_t
pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver
pinctrl: intel: merrifield: Correct UART pin lists
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
pinctrl: samsung: Remove bogus irq_[un]mask from resource management
pinctrl: meson-gxbb: Add missing GPIODV_18 pin entry
MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
Linux 4.9.44
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 68227c03cb upstream.
Before the patch, the flock flag could remain uninitialized for the
lifespan of the fuse_file allocation. Unless set to true in
fuse_file_flock(), it would remain in an indeterminate state until read in
an if statement in fuse_release_common(). This could consequently lead to
taking an unexpected branch in the code.
The bug was discovered by a runtime instrumentation designed to detect use
of uninitialized memory in the kernel.
Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com>
Fixes: 37fb3a30b4 ("fuse: fix flock")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e38bea99a upstream.
fuse_file_put() was missing the "force" flag for the RELEASE request when
sending synchronously (fuseblk).
If this flag is not set, then a sync request may be interrupted before it
is dequeued by the userspace filesystem. In this case the OPEN won't be
balanced with a RELEASE.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 5a18ec176c ("fuse: fix hang of single threaded fuseblk filesystem")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
