a9eb626 dtv_demod: Prevent NULL pointer crash caused by tuner attach failure [1/1]
d27b145 dtv_demod: TL1 dtmb suspend hangup issue [1/1]
27c05dd dtv_demod: tl1,dvbc, new method for fast channel searching [1/1]
fa80091 dtv_demod: txlx atsc-t loses lock when play video for a long time [1/1]
43db0c5 build: fix build err [1/1]
d4abd67 dtv_demod: TXLX ISDB-T can't search channel [1/1]
70f2c39 dtv_demod: TL1 dvbc search time more than 3 min [1/1]
16d4727 dtv_demod: TL1 dtmb cma allocate fail after dtmb->dvbc->dtmb by cmd [1/1]
b5aa9de media_module: h264/mpeg2/h265 [2/2]
3d6a5ed ppmgr: use light reg for video decoder local reset [1/1]
ppmgr: use light reg for video decoder local reset [1/1]
PD#SWPL-5014
Problem:
ppmgr provider error sometimes in long time run under poor signal
Solution:
use light reg for video decoder local reset
Verify:
X301
Change-Id: I1500c9ddfdce76b3e9cb2b24a35cdee765f82d5f
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
media_module: h264/mpeg2/h265 [2/2]
PD#SWPL-3654
Problem:
provide aspect_ratio information by AMSTREAM_IOC_VDECSTAT
Solution:
add ration_control information in vdec_status function for
h264/mh264/vh265/mpeg12/mmpeg12, and normalized it for
aspect_ratio in AMSTREAM_IOC_VDECSTAT message.
Verify:
Verified U212
Change-Id: Icd9270eb8f2ce2f6f7455ec28780d26ac6c56348
Signed-off-by: Rong Zhang <rong.zhang@amlogic.com>
dtv_demod: TL1 dtmb cma allocate fail after dtmb->dvbc->dtmb by cmd [1/1]
PD#TV-1748
Problem:
[Hisense-T962X2-P-customer-DTV]:Failed to lock frequency in dtmb system
Solution:
leave the last mode before enter current mode to release the resources
Verify:
verified by t962x2_x301
Change-Id: Ibd7e1d4c67f5a5ad2191e0031fdd0b81812c8606
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
dtv_demod: TL1 dvbc search time more than 3 min [1/1]
PD#SWPL-3555
Problem:
{DVB-C}Hisense needs less than 3 minutes for dvb-c search.(5/5，None)
Solution:
1.use demod internal state machine to optimize time
2.remove j.83b filter setting in dvbc mode for tl1 & txlx
Verify:
verified by t962x2_x301&t962x_r311
Change-Id: Ic922e3da727179e2e35a0fc80e52ac7242c54129
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
dtv_demod: TXLX ISDB-T can't search channel [1/1]
PD#SWPL-3987
Problem:
[Einstein]use ISDB-T cannot search any channel
Solution:
release cma memory at leave_mode for ISDB-t&DVB-T
Verify:
verified by t962x_r311
Change-Id: I9b79687a4d5270932ab30afaa3e7d2817e900149
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
build: fix build err [1/1]
PD#SWPL-4150
Problem:
When switch to the toolchain shipped with android P, multipile
"-Werror=maybe-uninitialized" error occurs, and the code fail
to be compiled
Solution:
Initialize variables if necessary
Verify:
Locally on Ampere
Change-Id: I280de648914565656831e211539bf41a7dee2b4a
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
dtv_demod: txlx atsc-t loses lock when play video for a long time [1/1]
PD#SWPL-3418
Problem:
[Einstein]when AC off/on,enter live TV ,
TV display blank screen and no signal about 5S
Solution:
use post-eq to track(0x912=0x50)
Verify:
verified by t962x_r311
Change-Id: I924c55a8f1c92328e4371cb730e1b03bd720457f
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
dtv_demod: tl1,dvbc, new method for fast channel searching [1/1]
PD#TV-2154
Problem:
[Hisense-T962X2-P-customer-DTV]:DVBC QAM is set to auto to search channels
Solution:
add new searching method
note:
use "demod_dvbc_speedup_en" to mark the new method
it's disabled as default, can be enabled if needed
we can make it always enabled after all testing are passed
enable: echo fast_search on > /sys/kernel/debug/demod/dvbc_channel_fast
Verify:
verified by t962x2_x301
Change-Id: Icaaab9f27eb058a062d7048c6ca9fa2e3bff008e
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
dtv_demod: TL1 dtmb suspend hangup issue [1/1]
PD#SWPL-5202
Problem:
cma memory is not released when suspend
Solution:
provide suspend interface to release cma memory
Verify:
verified by t962x2_x301
Change-Id: I1d808a8a6119a2f385961c4c5bded5ab71c9c9d1
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
dtv_demod: Prevent NULL pointer crash caused by tuner attach failure [1/1]
PD#TV-1539
Problem:
Prevent NULL pointer crash caused by tuner attach failure.
Solution:
Prevent NULL pointer crash caused by tuner attach failure.
Verify:
verified by x301
Change-Id: I57cf32947775626467eb952dd2298ae9ec84601d
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
dtv_demod: add AGC control for board t309 [1/1]
PD#SWPL-5175
Problem:
r842 agc control need be controlled by demod
Solution:
add agc control function
Verify:
verified by t962x2_x301 t962x2_t309
Change-Id: If712e22276b97c457e2e2ed1c79bdf3673813dff
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
commit abcbcb80cd upstream.
For the common cases where 1000 is a multiple of HZ, or HZ is a multiple of
1000, jiffies_to_msecs() never returns zero when passed a non-zero time
period.
However, if HZ > 1000 and not an integer multiple of 1000 (e.g. 1024 or
1200, as used on alpha and DECstation), jiffies_to_msecs() may return zero
for small non-zero time periods. This may break code that relies on
receiving back a non-zero value.
jiffies_to_usecs() does not need such a fix: one jiffy can only be less
than one µs if HZ > 1000000, and such large values of HZ are already
rejected at build time, twice:
- include/linux/jiffies.h does #error if HZ >= 12288,
- kernel/time/time.c has BUILD_BUG_ON(HZ > USEC_PER_SEC).
Broken since forever.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-alpha@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622143357.7495-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I ran into this:
================================================================================
UBSAN: Undefined behaviour in kernel/time/time.c:783:2
signed integer overflow:
5273 + 9223372036854771711 cannot be represented in type 'long int'
CPU: 0 PID: 17363 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #88
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org
04/01/2014
0000000000000000 ffff88011457f8f0 ffffffff82344f50 0000000041b58ab3
ffffffff84f98080 ffffffff82344ea4 ffff88011457f918 ffff88011457f8c8
ffff88011457f8e0 7fffffffffffefff ffff88011457f6d8 dffffc0000000000
Call Trace:
[<ffffffff82344f50>] dump_stack+0xac/0xfc
[<ffffffff82344ea4>] ? _atomic_dec_and_lock+0xc4/0xc4
[<ffffffff8242f4c8>] ubsan_epilogue+0xd/0x8a
[<ffffffff8242fc04>] handle_overflow+0x202/0x23d
[<ffffffff8242fa02>] ? val_to_string.constprop.6+0x11e/0x11e
[<ffffffff823c7837>] ? debug_smp_processor_id+0x17/0x20
[<ffffffff8131b581>] ? __sigqueue_free.part.13+0x51/0x70
[<ffffffff8146d4e0>] ? rcu_is_watching+0x110/0x110
[<ffffffff8242fc4d>] __ubsan_handle_add_overflow+0xe/0x10
[<ffffffff81476ef8>] timespec64_add_safe+0x298/0x340
[<ffffffff81476c60>] ? timespec_add_safe+0x330/0x330
[<ffffffff812f7990>] ? wait_noreap_copyout+0x1d0/0x1d0
[<ffffffff8184bf18>] poll_select_set_timeout+0xf8/0x170
[<ffffffff8184be20>] ? poll_schedule_timeout+0x2b0/0x2b0
[<ffffffff813aa9bb>] ? __might_sleep+0x5b/0x260
[<ffffffff833c8a87>] __sys_recvmmsg+0x107/0x790
[<ffffffff833c8980>] ? SyS_recvmsg+0x20/0x20
[<ffffffff81486378>] ? hrtimer_start_range_ns+0x3b8/0x1380
[<ffffffff845f8bfb>] ? _raw_spin_unlock_irqrestore+0x3b/0x60
[<ffffffff8148bcea>] ? do_setitimer+0x39a/0x8e0
[<ffffffff813aa9bb>] ? __might_sleep+0x5b/0x260
[<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790
[<ffffffff833c91e9>] SyS_recvmmsg+0xd9/0x160
[<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790
[<ffffffff823c7853>] ? __this_cpu_preempt_check+0x13/0x20
[<ffffffff8162f680>] ? __context_tracking_exit.part.3+0x30/0x1b0
[<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790
[<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0
[<ffffffff845f936a>] entry_SYSCALL64_slow_path+0x25/0x25
================================================================================
Line 783 is this:
783 set_normalized_timespec64(&res, lhs.tv_sec + rhs.tv_sec,
784 lhs.tv_nsec + rhs.tv_nsec);
In other words, since lhs.tv_sec and rhs.tv_sec are both time64_t, this
is a signed addition which will cause undefined behaviour on overflow.
Note that this is not currently a huge concern since the kernel should be
built with -fno-strict-overflow by default, but could be a problem in the
future, a problem with older compilers, or other compilers than gcc.
The easiest way to avoid the overflow is to cast one of the arguments to
unsigned (so the addition will be done using unsigned arithmetic).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
timespec64_add_safe() has been defined in time64.h for 64 bit systems.
But, 32 bit systems only have an extern function prototype defined.
Provide a definition for the above function.
The function will be necessary as part of y2038 changes. struct
timespec is not y2038 safe. All references to timespec will be replaced
by struct timespec64. The function is meant to be a replacement for
timespec_add_safe().
The implementation is similar to timespec_add_safe().
Link: http://lkml.kernel.org/r/1461947989-21926-2-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The do_sys_settimeofday() function uses a timespec, which is not year
2038 safe on 32bit systems.
Thus this patch introduces do_sys_settimeofday64(), which allows us to
transition users of do_sys_settimeofday() to using 64bit time types.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
[jstultz: Include errno-base.h to avoid build issue on some arches]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Handle the following ISO 8601 features in mktime64():
(1) Leap seconds.
Leap seconds are indicated by the seconds parameter being the value
60. Handle this by treating it the same as 00 of the following
minute.
It has been pointed out that a minute may contain two leap seconds.
However, pending discussion of what that looks like and how to handle
it, I'm not going to concern myself with it.
(2) Alternate encodings of midnight.
Two different encodings of midnight are permitted - 00:00:00 and
24:00:00 - the first is midnight today and the second is midnight
tomorrow and is exactly equivalent to the first with tomorrow's date.
As it happens, we don't actually need to change mktime64() to handle either
of these - just comment them as valid parameters.
These facility will be used by the X.509 parser. Doing it in mktime64()
makes the policy common to the whole kernel and easier to find.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
cc: John Stultz <john.stultz@linaro.org>
cc: Rudolf Polzer <rpolzer@google.com>
cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Pull timer updates from Thomas Gleixner:
"Rather large, but nothing exiting:
- new range check for settimeofday() to prevent that boot time
becomes negative.
- fix for file time rounding
- a few simplifications of the hrtimer code
- fix for the proc/timerlist code so the output of clock realtime
timers is accurate
- more y2038 work
- tree wide conversion of clockevent drivers to the new callbacks"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (88 commits)
hrtimer: Handle failure of tick_init_highres() gracefully
hrtimer: Unconfuse switch_hrtimer_base() a bit
hrtimer: Simplify get_target_base() by returning current base
hrtimer: Drop return code of hrtimer_switch_to_hres()
time: Introduce timespec64_to_jiffies()/jiffies_to_timespec64()
time: Introduce current_kernel_time64()
time: Introduce struct itimerspec64
time: Add the common weak version of update_persistent_clock()
time: Always make sure wall_to_monotonic isn't positive
time: Fix nanosecond file time rounding in timespec_trunc()
timer_list: Add the base offset so remaining nsecs are accurate for non monotonic timers
cris/time: Migrate to new 'set-state' interface
kernel: broadcast-hrtimer: Migrate to new 'set-state' interface
xtensa/time: Migrate to new 'set-state' interface
unicore/time: Migrate to new 'set-state' interface
um/time: Migrate to new 'set-state' interface
sparc/time: Migrate to new 'set-state' interface
sh/localtimer: Migrate to new 'set-state' interface
score/time: Migrate to new 'set-state' interface
s390/time: Migrate to new 'set-state' interface
...
The conversion between struct timespec and jiffies is not year 2038
safe on 32bit systems. Introduce timespec64_to_jiffies() and
jiffies_to_timespec64() functions which use struct timespec64 to
make it ready for 2038 issue.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
timespec_trunc() avoids rounding if granularity <= nanoseconds-per-jiffie
(or TICK_NSEC). This optimization assumes that:
1. current_kernel_time().tv_nsec is already rounded to TICK_NSEC (i.e.
with HZ=1000 you'd get 1000000, 2000000, 3000000... but never 1000001).
This is no longer true (probably since hrtimers introduced in 2.6.16).
2. TICK_NSEC is evenly divisible by all possible granularities. This may
be true for HZ=100, 250, 1000, but obviously not for HZ=300 /
TICK_NSEC=3333333 (introduced in 2.6.20).
Thus, sub-second portions of in-core file times are not rounded to on-disk
granularity. I.e. file times may change when the inode is re-read from disk
or when the file system is remounted.
This affects all file systems with file time granularities > 1 ns and < 1s,
e.g. CEPH (1000 ns), UDF (1000 ns), CIFS (100 ns), NTFS (100 ns) and FUSE
(configurable from user mode via struct fuse_init_out.time_gran).
Steps to reproduce with e.g. UDF:
$ dd if=/dev/zero of=udfdisk count=10000 && mkudffs udfdisk
$ mkdir udf && mount udfdisk udf
$ touch udf/test && stat -c %y udf/test
2015-06-09 10:22:56.130006767 +0200
$ umount udf && mount udfdisk udf
$ stat -c %y udf/test
2015-06-09 10:22:56.130006000 +0200
Remounting truncates the mtime to 1 µs.
Fix the rounding in timespec_trunc() and update the documentation.
timespec_trunc() is exclusively used to calculate inode's [acm]time (mostly
via current_fs_time()), and always with super_block.s_time_gran as second
argument. So this can safely be changed without side effects.
Note: This does _not_ fix the issue for FAT's 2 second mtime resolution,
as super_block.s_time_gran isn't prepared to handle different ctime /
mtime / atime resolutions nor resolutions > 1 second.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Pull timer fixes from Thomas Gleixner:
"A set of small fixes:
- regression fix for exynos_mct clocksource
- trivial build fix for kona clocksource
- functional one liner fix for the sh_tmu clocksource
- two validation fixes to prevent (root only) data corruption in the
kernel via settimeofday and adjtimex. Tagged for stable"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: adjtimex: Validate the ADJ_FREQUENCY values
time: settimeofday: Validate the values of tv from user
clocksource: sh_tmu: Set cpu_possible_mask to fix SMP broadcast
clocksource: kona: fix __iomem annotation
clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write
An unvalidated user input is multiplied by a constant, which can result in
an undefined behaviour for large values. While this is validated later,
we should avoid triggering undefined behaviour.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[jstultz: include trivial milisecond->microsecond correction noticed
by Andy]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Pull drm updates from Dave Airlie:
"Highlights:
- AMD KFD driver merge
This is the AMD HSA interface for exposing a lowlevel interface for
GPGPU use. They have an open source userspace built on top of this
interface, and the code looks as good as it was going to get out of
tree.
- Initial atomic modesetting work
The need for an atomic modesetting interface to allow userspace to
try and send a complete set of modesetting state to the driver has
arisen, and been suffering from neglect this past year. No more,
the start of the common code and changes for msm driver to use it
are in this tree. Ongoing work to get the userspace ioctl finished
and the code clean will probably wait until next kernel.
- DisplayID 1.3 and tiled monitor exposed to userspace.
Tiled monitor property is now exposed for userspace to make use of.
- Rockchip drm driver merged.
- imx gpu driver moved out of staging
Other stuff:
- core:
panel - MIPI DSI + new panels.
expose suggested x/y properties for virtual GPUs
- i915:
Initial Skylake (SKL) support
gen3/4 reset work
start of dri1/ums removal
infoframe tracking
fixes for lots of things.
- nouveau:
tegra k1 voltage support
GM204 modesetting support
GT21x memory reclocking work
- radeon:
CI dpm fixes
GPUVM improvements
Initial DPM fan control
- rcar-du:
HDMI support added
removed some support for old boards
slave encoder driver for Analog Devices adv7511
- exynos:
Exynos4415 SoC support
- msm:
a4xx gpu support
atomic helper conversion
- tegra:
iommu support
universal plane support
ganged-mode DSI support
- sti:
HDMI i2c improvements
- vmwgfx:
some late fixes.
- qxl:
use suggested x/y properties"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
drm: sti: fix module compilation issue
drm/i915: save/restore GMBUS freq across suspend/resume on gen4
drm: sti: correctly cleanup CRTC and planes
drm: sti: add HQVDP plane
drm: sti: add cursor plane
drm: sti: enable auxiliary CRTC
drm: sti: fix delay in VTG programming
drm: sti: prepare sti_tvout to support auxiliary crtc
drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
drm: sti: fix hdmi avi infoframe
drm: sti: remove event lock while disabling vblank
drm: sti: simplify gdp code
drm: sti: clear all mixer control
drm: sti: remove gpio for HDMI hot plug detection
drm: sti: allow to change hdmi ddc i2c adapter
drm/doc: Document drm_add_modes_noedid() usage
drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
drm: Zero out DRM object memory upon cleanup
drm/i915/bdw: Fix the write setting up the WIZ hashing mode
...
We've lost the +1 required for correct timeouts in
commit 5ed0bdf21a
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Wed Jul 16 21:05:06 2014 +0000
drm: i915: Use nsec based interfaces
Use ktime_get_raw_ns() and get rid of the back and forth timespec
conversions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: John Stultz <john.stultz@linaro.org>
So fix this up by reinstating our handrolled _timeout function. While
at it bother with handling MAX_JIFFIES.
v2: Convert to usecs (we don't care about the accuracy anyway) first
to avoid overflow issues Dave Gordon spotted.
v3: Drop the explicit MAX_JIFFY_OFFSET check, usecs_to_jiffies should
take care of that already. It might be a bit too enthusiastic about it
though.
v4: Chris has a much nicer color, so use his implementation.
This requires to export nsec_to_jiffies from time.c.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82749
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As part of addressing "y2038 problem" for in-kernel uses, this
patch adds safe mktime64() using time64_t.
After this patch, mktime() is deprecated and all its call sites
will be fixed using mktime64(), after that it can be removed.
Signed-off-by: pang.xunlei <pang.xunlei@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
timeval_to_jiffies tried to round a timeval up to an integral number
of jiffies, but the logic for doing so was incorrect: intervals
corresponding to exactly N jiffies would become N+1. This manifested
itself particularly repeatedly stopping/starting an itimer:
setitimer(ITIMER_PROF, &val, NULL);
setitimer(ITIMER_PROF, NULL, &val);
would add a full tick to val, _even if it was exactly representable in
terms of jiffies_ (say, the result of a previous rounding.) Doing
this repeatedly would cause unbounded growth in val. So fix the math.
Here's what was wrong with the conversion: we essentially computed
(eliding seconds)
jiffies = usec * (NSEC_PER_USEC/TICK_NSEC)
by using scaling arithmetic, which took the best approximation of
NSEC_PER_USEC/TICK_NSEC with denominator of 2^USEC_JIFFIE_SC =
x/(2^USEC_JIFFIE_SC), and computed:
jiffies = (usec * x) >> USEC_JIFFIE_SC
and rounded this calculation up in the intermediate form (since we
can't necessarily exactly represent TICK_NSEC in usec.) But the
scaling arithmetic is a (very slight) *over*approximation of the true
value; that is, instead of dividing by (1 usec/ 1 jiffie), we
effectively divided by (1 usec/1 jiffie)-epsilon (rounding
down). This would normally be fine, but we want to round timeouts up,
and we did so by adding 2^USEC_JIFFIE_SC - 1 before the shift; this
would be fine if our division was exact, but dividing this by the
slightly smaller factor was equivalent to adding just _over_ 1 to the
final result (instead of just _under_ 1, as desired.)
In particular, with HZ=1000, we consistently computed that 10000 usec
was 11 jiffies; the same was true for any exact multiple of
TICK_NSEC.
We could possibly still round in the intermediate form, adding
something less than 2^USEC_JIFFIE_SC - 1, but easier still is to
convert usec->nsec, round in nanoseconds, and then convert using
time*spec*_to_jiffies. This adds one constant multiplication, and is
not observably slower in microbenchmarks on recent x86 hardware.
Tested: the following program:
int main() {
struct itimerval zero = {{0, 0}, {0, 0}};
/* Initially set to 10 ms. */
struct itimerval initial = zero;
initial.it_interval.tv_usec = 10000;
setitimer(ITIMER_PROF, &initial, NULL);
/* Save and restore several times. */
for (size_t i = 0; i < 10; ++i) {
struct itimerval prev;
setitimer(ITIMER_PROF, &zero, &prev);
/* on old kernels, this goes up by TICK_USEC every iteration */
printf("previous value: %ld %ld %ld %ld\n",
prev.it_interval.tv_sec, prev.it_interval.tv_usec,
prev.it_value.tv_sec, prev.it_value.tv_usec);
setitimer(ITIMER_PROF, &prev, NULL);
}
return 0;
}
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Turner <pjt@google.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Paul Turner <pjt@google.com>
Reported-by: Aaron Jacobs <jacobsa@google.com>
Signed-off-by: Andrew Hunter <ahh@google.com>
[jstultz: Tweaked to apply to 3.17-rc]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Required for moving drivers to the nanosecond based interfaces.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Right now we have time related prototypes in 3 different header
files. Move it to a single timekeeping header file and move the core
internal stuff into a core private header.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
