RK3228 uses the Synopsys DWC HDMI TX controller and the INNO HDMI PHY to
enabling the integration of a complete HDMI Transmmiter interface.
Change-Id: I90f997968fb2de4165a31216c8aee8213089eab5
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>
Switch code to use the newly introduced V4L bus formats IDs instead of custom
defines. Also use the V4L encoding defines.
Some display pipelines can only provide non-RBG input pixels to the HDMI TX
Controller, this patch takes the pixel format from the plat_data if provided.
Change-Id: I2b70ed0f3cab8c6873bb407977738677375b24b0
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit def23aa7e9)
* linux-linaro-lsk-v4.4-android: (521 commits)
Linux 4.4.66
ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
ARCv2: save r30 on kernel entry as gcc uses it for code-gen
nfsd: check for oversized NFSv2/v3 arguments
Input: i8042 - add Clevo P650RS to the i8042 reset list
p9_client_readdir() fix
MIPS: Avoid BUG warning in arch_check_elf
MIPS: KGDB: Use kernel context for sleeping threads
ALSA: seq: Don't break snd_use_lock_sync() loop by timeout
ALSA: firewire-lib: fix inappropriate assignment between signed/unsigned type
ipv6: check raw payload size correctly in ioctl
ipv6: check skb->protocol before lookup for nexthop
macvlan: Fix device ref leak when purging bc_queue
ip6mr: fix notification device destruction
netpoll: Check for skb->queue_mapping
net: ipv6: RTF_PCPU should not be settable from userspace
dp83640: don't recieve time stamps twice
tcp: clear saved_syn in tcp_disconnect()
sctp: listen on the sock only when it's state is listening or closed
net: ipv4: fix multipath RTM_GETROUTE behavior when iif is given
...
Conflicts:
drivers/usb/dwc3/gadget.c
include/linux/usb/quirks.h
Change-Id: I490f766b9a530b10da3107e20709538e4536a99d
The function is_rockchip isn't used any more now that phy reset
operation is performed based on detected phy type.
Change-Id: I58e7a222bc1e1578f0d5d2fcd884b17171fb9601
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
commit fe25deb773 upstream.
Previously, when a surface was opened using a legacy (non prime) handle,
it was verified to have been created by a client in the same master realm.
Relax this so that opening is also allowed recursively if the client
already has the surface open.
This works around a regression in svga mesa where opening of a shared
surface is used recursively to obtain surface information.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64).
For any other mode, the VIC filed in AVI infoframes should be 0.
HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is
extended to (VIC 1-107).
This patch adds a bool input variable, which indicates if the connected
sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a
HDMI 2.0 VIC to a HDMI 1.4 sink.
This patch touches all drm drivers, who are callers of this function
drm_hdmi_avi_infoframe_from_display_mode but to make sure there is
no change in current behavior, is_hdmi2 is kept as false.
In case of I915 driver, this patch checks the connector->display_info
to check if the connected display is HDMI 2.0.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
PS: This patch touches a few lines in few files, which were
already above 80 char, so checkpatch gives 80 char warning again.
- gpu/drm/omapdrm/omap_encoder.c
- gpu/drm/i915/intel_sdvo.c
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
(am from https://patchwork.kernel.org/patch/9641449)
Change-Id: I364cd0aed7eea0384ea9eddfff20c3fa86eb9ba2
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
HDMI PD is power off when system suspend, so ih_mute register
bit0 mute_all_interrupt will be reset to 1 when system resume.
HPD interrupt will be mask, that would cause hdmi plugin could
not be detected.
Change-Id: I3bf2e6116e902cd516a7ac69fbe8569ca943e853
Signed-off-by: Bin Yang <yangbin@rock-chips.com>
Rather than using drm_match_cea_mode() to see if the EDID detailed
timings are supposed to represent one of the CEA/HDMI modes, add a
special version of that function that takes in an explicit clock
tolerance value (in kHz). When looking at the detailed timings specify
the tolerance as 5kHz due to the 10kHz clock resolution limit inherent
in detailed timings.
drm_match_cea_mode() uses the normal KHZ2PICOS() matching of clocks,
which only allows smaller errors for lower clocks (eg. for 25200 it
won't allow any error) and a bigger error for higher clocks (eg. for
297000 it actually matches 296913-297000). So it doesn't really match
what we want for the fixup. Using the explicit +-5kHz is much better
for this use case.
Not sure if we should change the normal mode matching to also use
something else besides KHZ2PICOS() since it allows a different
proportion of error depending on the clock. I believe VESA CVT
allows a maximum deviation of .5%, so using that for normal mode
matching might be a good idea?
Change-Id: I824ec50368ddf152c9daa747ba92aaba1ef50f4b
Cc: Adam Jackson <ajax@redhat.com>
Tested-by: nathan.d.ciobanu@linux.intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92217
Fixes: fa3a7340ea ("drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 4c6bcf4454)
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Adds parsing for HDMI 2.0 'HDMI Forum Vendor
Specific Data Block'. This block is present in
some HDMI 2.0 EDID's and gives information about
scrambling support, SCDC, 3D Views, and others.
Parsed parameters are stored in drm_connector
structure.
(am from: https://patchwork.kernel.org/patch/9273645)
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Change-Id: I5a1485b79a407fd27ac4754827de318175bb8f6a
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
SCDC is a mechanism defined in the HDMI 2.0 specification that allows
the source and sink devices to communicate.
This commit introduces helpers to access the SCDC and provides the
symbolic names for the various registers defined in the specification.
(am from: https://patchwork.kernel.org/patch/7258251/)
Change-Id: I378bc2b465a720ccfede35a93bce0d9371e78f78
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Like what has been done for connectors add callbacks on encoder,
crtc and plane to let driver do actions after drm device registration.
Correspondingly, add callbacks called before unregister drm device.
version 2:
add drm_modeset_register_all() and drm_modeset_unregister_all()
to centralize all calls
version 3:
in error case unwind registers in drm_modeset_register_all
fix uninitialed return value
inverse order of unregistration in drm_modeset_unregister_all
version 4:
move function definitions in drm_crtc_internal.h
remove not needed documentation
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466519829-4000-1-git-send-email-benjamin.gaignard@linaro.org
(cherry picked from commit 79190ea265)
Change-Id: I836e8ea62b46c0eae89cf8c70bcf3ea4e10068f5
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
drm_format_plane_cpp use byte size, not works for 10bit
format, use drm_format_plane_bpp instead.
Change-Id: If1a6ca1c286747fdc868184cebe75eb0af0a746d
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
* linux-linaro-lsk-v4.4-android: (1362 commits)
Linux 4.4.30
Revert "fix minor infoleak in get_user_ex()"
Revert "x86/mm: Expand the exception table logic to allow new handling options"
Linux 4.4.29
ARM: pxa: pxa_cplds: fix interrupt handling
powerpc/nvram: Fix an incorrect partition merge
mpt3sas: Don't spam logs if logging level is 0
perf symbols: Fixup symbol sizes before picking best ones
perf symbols: Check symbol_conf.allow_aliases for kallsyms loading too
perf hists browser: Fix event group display
clk: divider: Fix clk_divider_round_rate() to use clk_readl()
clk: qoriq: fix a register offset error
s390/con3270: fix insufficient space padding
s390/con3270: fix use of uninitialised data
s390/cio: fix accidental interrupt enabling during resume
x86/mm: Expand the exception table logic to allow new handling options
dmaengine: ipu: remove bogus NO_IRQ reference
power: bq24257: Fix use of uninitialized pointer bq->charger
staging: r8188eu: Fix scheduling while atomic splat
ASoC: dapm: Fix kcontrol creation for output driver widget
...
LSK 16.07 v4.4-android
* tag 'lsk-v4.4-16.07-android': (160 commits)
arm64: kaslr: increase randomization granularity
arm64: relocatable: deal with physically misaligned kernel images
arm64: don't map TEXT_OFFSET bytes below the kernel if we can avoid it
arm64: kernel: replace early 64-bit literal loads with move-immediates
arm64: introduce mov_q macro to move a constant into a 64-bit register
arm64: kernel: perform relocation processing from ID map
arm64: kernel: use literal for relocated address of __secondary_switched
arm64: kernel: don't export local symbols from head.S
arm64: simplify kernel segment mapping granularity
arm64: cover the .head.text section in the .text segment mapping
arm64: move early boot code to the .init segment
arm64: use 'segment' rather than 'chunk' to describe mapped kernel regions
arm64: mm: Mark .rodata as RO
Linux 4.4.16
ovl: verify upper dentry before unlink and rename
drm/i915: Revert DisplayPort fast link training feature
tmpfs: fix regression hang in fallocate undo
tmpfs: don't undo fallocate past its last page
crypto: qat - make qat_asym_algs.o depend on asn1 headers
xen/acpi: allow xen-acpi-processor driver to load on Xen 4.7
...
Provide subsystem-level suspend and resume helpers that can be used to
implement suspend/resume on atomic mode-setting enabled drivers.
v2: simplify locking, enhance kerneldoc comments
v3: pass lock acquisition context by parameter, improve kerneldoc
v4: - remove redundant code (already provided by atomic helpers)
(Maarten Lankhorst)
- move backoff dance from drm_modeset_lock_all_ctx() into suspend
helper (Daniel Vetter)
v5: handle potential EDEADLK from drm_atomic_helper_duplicate_state()
and drm_atomic_helper_disable_all() (Daniel Vetter)
Change-Id: I58c5b794cdafa6c9f2594376fc2e98918156e409
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449075005-13937-2-git-send-email-thierry.reding@gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
(cherry picked from 1494276000)
This function is like drm_modeset_lock_all(), but it takes the lock
acquisition context as a parameter rather than storing it in the DRM
device's mode_config structure.
Implement drm_modeset_{,un}lock_all() in terms of the new function for
better code reuse, and add a note to the kerneldoc that new code should
use the new functions.
v2: improve kerneldoc
v4: rename drm_modeset_lock_all_crtcs() to drm_modeset_lock_all_ctx()
and take mode_config's .connection_mutex instead of .mutex lock to
avoid lock inversion (Daniel Vetter), use drm_modeset_drop_locks()
which is now the equivalent of drm_modeset_unlock_all_ctx()
v5: do not take the dev->mode_config.connection_mutex in
drm_atomic_legacy_backoff() since drm_modeset_lock_all_ctx()
already keeps it, enhance kerneldoc for drm_modeset_lock_all_ctx()
(Daniel Vetter)
Change-Id: I1f16f686f77139b749b38c7a3a0dbc0b5d25f6fd
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449075005-13937-1-git-send-email-thierry.reding@gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
(cherry picked from commit 06eaae4638)
commit 94477bff39 upstream.
There are cases where it is desired to see if a proposed placement
is compatible with a buffer object before calling ttm_bo_validate().
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original math would bring some inaccurate to N/CTS that would
caused those magic number won't fit the HDMI 1.4 Spec request:
128 * SampleRate = Tmds * N / CTS;
So this time we try to improved to math of N that would find the
minimal inaccurate with the HDMI 1.4 Spec.
Change-Id: Ied3cde3c352d955ae6f15d5e7fb172e92316c2a5
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/315424
Reviewed-by: Douglas Anderson <dianders@chromium.org>
RK3399 and RK3288 shared the same HDMI IP controller, only some light
difference with GRF configure.
Change-Id: Ic404ff3df6004a87b709f00552d91eb546c78450
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
(am from https://patchwork.kernel.org/patch/9223315/)
This misc update would try to fix below comments from my eDP thread[0],
and lucky to say this version is stable, and i'm start to perpare the
pull request to David with this version. So i guess it's time to create
a misc FIXUP patch to address the comments.
[0]: https://patchwork.kernel.org/patch/9175613/
- Correct the misspell of "marcos" in commit message (Dominik, reviewed at Google Gerrit)
- Write a kerneldoc-style comment explaining the chips data fields (Tomasz, reviewed at Google Gerrit)
- Drop the '.lcdcsel_mask' number in chips data field (Tomasz, reviewed at Google Gerrit)
- Make this hack code more clear (Tomasz, reviewed at Google Gerrit)
reg = ~reg & REF_CLK_MASK; ---> reg ^= REF_CLK_MASK;
- Give the "rk3399-edp" a separate line for clarity in document (Tomasz, reviewed at Google Gerrit)
- Move 'output_type' setting before the return statement (Tomasz, reviewed at Google Gerrit)
- Avoid to change any internal driver state in .mode_valid interface. (Tomasz, reviewed at Google Gerrit)
- Hook the connector's color_formats in .get_modes directly. (Tomasz, reviewed at Google Gerrit)
Change-Id: Ic35f166ebac04e417ff3d135e7bf4573bbca2004
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
This patch adds a helper to parse the encoder endpoint connected to the
encoder's crtc and two helpers to return its id and port id.
This can be used to determine input mux setting from endpoint or port ids.
Change-Id: I48eb7c66edb951af40085e4e388afbd5d4b2c77b
Suggested-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
(cherry pick from commit 4cacf91fcb)
* linux-linaro-lsk-v4.4-android: (797 commits)
parisc: Use generic extable search and sort routines
arm64: kasan: Use actual memory node when populating the kernel image shadow
arm64: mm: treat memstart_addr as a signed quantity
arm64: lse: deal with clobbered IP registers after branch via PLT
arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly
arm64: kasan: Fix zero shadow mapping overriding kernel image shadow
arm64: consistently use p?d_set_huge
arm64: fix KASLR boot-time I-cache maintenance
arm64: hugetlb: partial revert of 66b3923a1a
arm64: make irq_stack_ptr more robust
arm64: efi: invoke EFI_RNG_PROTOCOL to supply KASLR randomness
efi: stub: use high allocation for converted command line
efi: stub: add implementation of efi_random_alloc()
efi: stub: implement efi_get_random_bytes() based on EFI_RNG_PROTOCOL
arm64: kaslr: randomize the linear region
arm64: add support for kernel ASLR
arm64: add support for building vmlinux as a relocatable PIE binary
arm64: switch to relative exception tables
extable: add support for relative extables to search and sort routines
scripts/sortextable: add support for ET_DYN binaries
...
Conflicts:
arch/arm64/mm/dma-mapping.c
drivers/clk/rockchip/clk-rk3368.c
drivers/mmc/core/core.c
drivers/mmc/core/sdio.c
include/linux/dcache.h
Change-Id: Ibaa1e90ac735db8d9f5e542c266ef27b91616ef4
The plane hardware is used when the display scanout run into plane active
scanout, that means we can reuse the plane hardware resources on plane
non-active scanout.
Because resource share, There are some limit on share plane: one group
of share planes need use same zpos, can't not overlap, etc.
We assume share plane is a universal plane with some limit flags.
people who use the share plane need know the limit, should call the ioctl
DRM_CLIENT_CAP_SHARE_PLANES, and judge the planes limit before use it.
Change-Id: Iecc3d8e7f1ce29d567cdbad689ba4dbad3d594e1
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
It's helpful to expand the mode_valid callback to platform driver,
so they could valid the display mode or informations.
Change-Id: Icfd7593bd10c93fc9045acf04a8d0ed6336ffb85
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Thoes file were introduced by Commit bdafdac384
(rk3288 chromium: drm grafic fb support for x11 mali gpu), for now we have the
mainline rockchip drm code, no need those old head files, let's removed them.
Change-Id: I325a5b7981ac5478349f276f8811b1b51e40c564
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
* linux-linaro-lsk-v4.4-android: (477 commits)
arm64: vdso: Mark vDSO code as read-only
ARM/vdso: Mark the vDSO code read-only after init
x86/vdso: Mark the vDSO code read-only after init
lkdtm: Verify that '__ro_after_init' works correctly
arch: Introduce post-init read-only memory
x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option
mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings
asm-generic: Consolidate mark_rodata_ro()
Linux 4.4.6
ld-version: Fix awk regex compile failure
target: Drop incorrect ABORT_TASK put for completed commands
block: don't optimize for non-cloned bio in bio_get_last_bvec()
MIPS: smp.c: Fix uninitialised temp_foreign_map
MIPS: Fix build error when SMP is used without GIC
ovl: fix getcwd() failure after unsuccessful rmdir
ovl: copy new uid/gid into overlayfs runtime inode
userfaultfd: don't block on the last VM updates at exit time
powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages
powerpc/powernv: Add a kmsg_dumper that flushes console output on panic
powerpc: Fix dedotify for binutils >= 2.26
...
Rockchip have three clocks for dp controller, we leave pclk_edp
to analogix_dp driver control, and keep the sclk_edp_24m and
sclk_edp in platform driver.
(am from https://patchwork.kernel.org/patch/8615371/)
Change-Id: Ibe22447ab881b7421e999479cbdfd529d183f6b4
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Split the dp core driver from exynos directory to bridge directory,
and rename the core driver to analogix_dp_*, rename the platform
code to exynos_dp.
Beside the new analogix_dp driver would export six hooks.
"analogix_dp_bind()" and "analogix_dp_unbind()"
"analogix_dp_suspned()" and "analogix_dp_resume()"
"analogix_dp_detect()" and "analogix_dp_get_modes()"
The bind/unbind symbols is used for analogix platform driver to connect
with analogix_dp core driver. And the detect/get_modes is used for analogix
platform driver to init the connector.
They reason why connector need register in helper driver is rockchip drm
haven't implement the atomic API, but Exynos drm have implement it, so
there would need two different connector helper functions, that's why we
leave the connector register in helper driver.
(am from https://patchwork.kernel.org/patch/8615401/)
Change-Id: Iad075ae92ba9fa08674fb3d36488f7691909fead
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
