mirror of
https://github.com/hardkernel/linux.git
synced 2026-03-26 20:40:24 +09:00
2067e7a00aa604b94de31d64f29b8893b1696f26
611976 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Dan Carpenter
|
8f9850dd8d |
net: phy: unlock on error in phy_probe()
If genphy_c45_read_eee_adv() fails then we need to do a reset and unlock
the &phydev->lock mutex before returning.
Fixes:
|
||
|
Kang Chen
|
11f180a5d6 |
nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties
devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause
out-of-bounds write in device_property_read_u8_array later.
Fixes:
|
||
|
Rafał Miłecki
|
f99e6d7c4e |
bgmac: fix *initial* chip reset to support BCM5358
While bringing hardware up we should perform a full reset including the
switch bit (BGMAC_BCMA_IOCTL_SW_RESET aka SICF_SWRST). It's what
specification says and what reference driver does.
This seems to be critical for the BCM5358. Without this hardware doesn't
get initialized properly and doesn't seem to transmit or receive any
packets.
Originally bgmac was calling bgmac_chip_reset() before setting
"has_robosw" property which resulted in expected behaviour. That has
changed as a side effect of adding platform device support which
regressed BCM5358 support.
Fixes:
|
||
|
Linus Torvalds
|
5ca26d6039 |
Merge tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
The notable fixes here are the EEE fix which restores boot for many
embedded platforms (real and QEMU); WiFi warning suppression and the
ICE Kconfig cleanup.
Current release - regressions:
- phy: multiple fixes for EEE rework
- wifi: wext: warn about usage only once
- wifi: ath11k: allow system suspend to survive ath11k
Current release - new code bugs:
- mlx5: Fix memory leak in IPsec RoCE creation
- ibmvnic: assign XPS map to correct queue index
Previous releases - regressions:
- netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
- netfilter: ctnetlink: make event listener tracking global
- nf_tables: allow to fetch set elements when table has an owner
- mlx5:
- fix skb leak while fifo resync and push
- fix possible ptp queue fifo use-after-free
Previous releases - always broken:
- sched: fix action bind logic
- ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also
uses a mutex
- netfilter: conntrack: fix rmmod double-free race
- netfilter: xt_length: use skb len to match in length_mt6, avoid
issues with BIG TCP
Misc:
- ice: remove unnecessary CONFIG_ICE_GNSS
- mlx5e: remove hairpin write debugfs files
- sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
* tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
tcp: tcp_check_req() can be called from process context
net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
xen-netback: remove unused variables pending_idx and index
net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
net: dsa: ocelot_ext: remove unnecessary phylink.h include
net: mscc: ocelot: fix duplicate driver name error
net: dsa: felix: fix internal MDIO controller resource length
net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
net/sched: act_sample: fix action bind logic
net/sched: act_mpls: fix action bind logic
net/sched: act_pedit: fix action bind logic
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
qede: avoid uninitialized entries in coal_entry array
nfc: fix memory leak of se_io context in nfc_genl_se_io
ice: remove unnecessary CONFIG_ICE_GNSS
net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy()
ibmvnic: Assign XPS map to correct queue index
docs: net: fix inaccuracies in msg_zerocopy.rst
tools: net: add __pycache__ to gitignore
...
|
||
|
Oleksij Rempel
|
972074ea88 |
net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
Without proper initialization, "changed" returned random numbers and caused
interface initialization failures.
Fixes:
|
||
|
Tom Rix
|
ccf8f7d714 |
xen-netback: remove unused variables pending_idx and index
building with gcc and W=1 reports
drivers/net/xen-netback/netback.c:886:21: error: variable
‘pending_idx’ set but not used [-Werror=unused-but-set-variable]
886 | u16 pending_idx;
| ^~~~~~~~~~~
pending_idx is not used so remove it. Since index was only
used to set pending_idx, remove index as well.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230226163429.2351600-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Jakub Kicinski
|
4db692d682 |
Merge tag 'wireless-2023-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says: ==================== wireless fixes for v6.3 First set of fixes for v6.3. We have only three oneliners. The most important one is the patch reducing warnings about the Wireless Extensions usage, reported by Linus. * tag 'wireless-2023-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: wext: warn about usage only once wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue wifi: ath11k: allow system suspend to survive ath11k ==================== Link: https://lore.kernel.org/r/20230227131053.BD779C433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
11c7052998 |
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
|
||
|
Linus Torvalds
|
da15efe1a8 |
Merge tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson: "MMC core: - Extend slot-gpio to be used for host specific card detect interrupts - Align to common busy polling behaviour for mmc ioctls - Suggest the BFQ I/O scheduler to be built along with MMC/SD support - Add devm_mmc_alloc_host() to enable further cleanups in host drivers MMC host: - atmel-mci: Fix race condition when stopping/starting a command - dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant - dw_mmc-rockchip: Add support for the RK3588 variant - jz4740: Add support for the vqmmc power supply - meson-gx: Convert the DT bindings to the dt-schema - meson-gx: Enable the platform interrupt to be used for card detect - moxart: Set the supported maximum request/block/segment sizes - renesas,sdhi: Add support for the RZ/V2M variants - sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS - sdhci-esdhc-imx: Improve tuning logic support - sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants - sdhci-of-dwcmshc: Add the missing device table IDs for acpi - sdhci-of-dwcmshc: Improve clock support for the Rockchip variant - sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant - sdhci-pxav2: Add support for the PXA168 V1 variant - sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant - uniphier-sd: Add support for SD UHS-I speed modes" * tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits) mmc: meson-gx: Use devm_platform_get_and_ioremap_resource() mmc: meson-gx: constify member data of struct meson_host mmc: meson-gx: use devm_clk_get_enabled() for core clock mmc: core: fix return value check in devm_mmc_alloc_host() dt-bindings: mmc: meson-gx: fix interrupt binding mmc: meson-gx: support platform interrupt as card detect interrupt dt-bindings: mmc: meson-gx: support specifying cd interrupt mmc: core: support setting card detect interrupt from drivers mmc: starfive: Add sdio/emmc driver support dt-bindings: mmc: Add StarFive MMC module dt-bindings: mmc: sdhci-msm: Allow 1 icc path dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string mmc: core: Align to common busy polling behaviour for mmc ioctls dt-bindings: mmc: Add resets property to cadence SDHCI binding mmc: meson-gx: remove meson_mmc_get_cd mmc: moxart: set maximum request/block/segment sizes mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource() mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform mmc: jz4740: Add support for vqmmc power supply ... |
||
|
Linus Torvalds
|
f3a2439f20 |
Merge tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson: - Support for PRU clients to acquire a control reference to the PRU instances is introduced, and the PRU now allows specifying firmware-name in Devicetree. sysfs is requested to be read-only when the remoteproc instance is consumed by another kernel driver - Support for the C7xv DSP on AM62A SoC is introduced - The Devicetree binding for the Qualcomm PAS devices are split up in multiple files, to better account for the differences in resources between them. A number of missing Devicetree bindings are added, and the Qualcomm WCNSS binding is converted to YAML - A few cleanups are introduced for the Mediatek SCP driver. And a sanity check of the firmware image is introduced in the Mediatek driver - For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and modem support, SM6115 and SM8550 gains ADSP, CDSP and modem support, and support for pronto v3 support (used on e.g. MSM8953) is added - The Qualcomm modem remoteproc driver is modified to use a no-map reserved-memory region for it's authentication metadata, in order to avoid fatal security violations caused by accesses from Linux during the authentication process - Support for separate loading of a Devicetree blob is added to the PAS driver, and support for the PAS driver to carve out DSM memory for the modem is added as well - The Qualcomm ADSP remoteproc driver gains support for mapping memory into specific range using the IOMMU. The sysmon driver is transitioned to strlcpy() * tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (69 commits) dt-bindings: mailbox: qcom,apcs-kpss-global: drop mbox-names from example dt-bindings: remoteproc: qcom,glink-edge: correct label description dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema dt-bindings: remoteproc: qcom,sm8550-pas: correct power domains remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autoboot dt-bindings: remoteproc: qcom: Add sm6115 pas yaml file remoteproc: qcom: pas: Add sm6115 remoteprocs remoteproc: qcom: pas: Adjust the phys addr wrt the mem region remoteproc: qcom: fix sparse warnings remoteproc: qcom: replace kstrdup with kstrndup remoteproc: mediatek: Check the SCP image format remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use" dt-bindings: remoteproc: qcom,sc7280-mss-pil: Update memory-region dt-bindings: remoteproc: qcom,sc7180-mss-pil: Update memory-region dt-bindings: remoteproc: qcom,msm8996-mss-pil: Update memory region dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading ... |
||
|
Linus Torvalds
|
cc38a46de7 |
Merge tag 'rpmsg-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson: - rpmsg ctrl and char driver locking is ensure ordering in cases where the communication link is being torn down in parallel with calls to open(2) or poll(2) - The glink driver is refactored, to move rpm/smem-specifics out of the common logic and better suite further improvements, such as transports without a mailbox controller. The handling of remoteproc shutdown is improved, to fail clients immediately instead of having them to wait for timeouts. A driver_override memory leak is corrected and a few spelling improvements are introduced - glink_ssr is transitioned off strlcpy() and "gpr" is added as a valid child node of the glink-edge DT binding * tag 'rpmsg-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: glink: Release driver_override rpmsg: glink: Avoid infinite loop on intent for missing channel rpmsg: glink: Fix GLINK command prefix rpmsg: glink: Fix spelling of peek rpmsg: glink: Cancel pending intent requests at removal rpmsg: glink: Fail qcom_glink_tx() once remove has been initiated rpmsg: glink: Move irq and mbox handling to transports rpmsg: glink: rpm: Wrap driver context rpmsg: glink: smem: Wrap driver context rpmsg: glink: Extract tx kick operation rpmsg: glink: Include types in qcom_glink_native.h rpmsg: ctrl: Add lock to rpmsg_ctrldev_remove rpmsg: char: Add lock to avoid race when rpmsg device is released rpmsg: move from strlcpy with unused retval to strscpy dt-bindings: remoteproc: qcom,glink-edge: add GPR node |
||
|
Linus Torvalds
|
9b0b0dd857 |
Merge tag 'hwlock-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson: "This updates the sun6i DT binding to allow (and require) #hwlock-cells and makes use of device_match_of_node() to slight clean up the condition in of_hwspin_lock_get_id()" * tag 'hwlock-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: dt-bindings: hwlock: sun6i: Add #hwlock-cells to example dt-bindings: hwlock: sun6i: Add missing #hwlock-cells hwspinlock: Use device_match_of_node() |
||
|
Linus Torvalds
|
498a1cf902 |
Merge tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada: - Change V=1 option to print both short log and full command log - Allow V=1 and V=2 to be combined as V=12 - Make W=1 detect wrong .gitignore files - Tree-wide cleanups for unused command line arguments passed to Clang - Stop using -Qunused-arguments with Clang - Make scripts/setlocalversion handle only correct release tags instead of any arbitrary annotated tag - Create Debian and RPM source packages without cleaning the source tree - Various cleanups for packaging * tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits) kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install docs: kbuild: remove description of KBUILD_LDS_MODULE .gitattributes: use 'dts' diff driver for *.dtso files kbuild: deb-pkg: improve the usability of source package kbuild: deb-pkg: fix binary-arch and clean in debian/rules kbuild: tar-pkg: use tar rules in scripts/Makefile.package kbuild: make perf-tar*-src-pkg work without relying on git kbuild: deb-pkg: switch over to source format 3.0 (quilt) kbuild: deb-pkg: make .orig tarball a hard link if possible kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile kbuild: srcrpm-pkg: create source package without cleaning kbuild: rpm-pkg: build binary packages from source rpm kbuild: deb-pkg: create source package without cleaning kbuild: add a tool to list files ignored by git Documentation/llvm: add Chimera Linux, Google and Meta datacenters setlocalversion: use only the correct release tag for git-describe setlocalversion: clean up the construction of version output .gitignore: ignore *.cover and *.mbx kbuild: remove --include-dir MAKEFLAG from top Makefile kbuild: fix trivial typo in comment ... |
||
|
Linus Torvalds
|
4b8c673b76 |
Merge tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye, stkwebcam, tm6000, vpfe_capture and zr364xx - saa7146 recovered from staging/deprecated. We opted to give ti a chance, and, instead of deprecating it, the intention is to write patches migrating it from VB1 to VB2. - av7110 returned from staging/deprecated/ to staging/ as we're not planning on dropping it any time soon - media controller API has gained experimental support for G_ROUTING and streams API. No drivers use it right now. We're planning to add one after -rc1, giving some time to experience the API and eventually have changes during the next development cycle - New sensor drivers: imx296, imx415, ov8858 - Atomisp had lots of changes, specially on its sensor's interface, making atomisp sensor drivers closer to normal sensor drivers - media controller kAPI has gained some helpers to traverse pipelines - uvcvideo now better support power line control - lots of bug fixes, cleanups and driver improvements * tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits) media: imx-mipi-csis: Check csis_fmt validity before use media: v4l2-subdev.c: clear stream field media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci" media: Revert "media: av7110: move to staging/media/deprecated/saa7146" media: imx-pxp: convert to regmap media: imx-pxp: Use non-threaded IRQ media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers media: imx-pxp: Implement frame size enumeration media: imx-pxp: Pass pixel format value to find_format() media: imx-pxp: Add media controller support media: imx-pxp: Don't set bus_info manually in .querycap() media: imx-pxp: Sort headers alphabetically media: imx-pxp: add support for i.MX7D media: imx-pxp: make data_path_ctrl0 platform dependent media: imx-pxp: disable LUT block media: imx-pxp: explicitly disable unused blocks media: imx-pxp: extract helper function to setup data path media: imx-pxp: detect PXP version media: dt-bindings: media: fsl-pxp: convert to yaml ... |
||
|
Russell King (Oracle)
|
724337be7f |
net: dsa: ocelot_ext: remove unnecessary phylink.h include
During review of ocelot_ext, it created a private phylink instance that wasn't necessary. This was removed for subsequent postings, but the include file seems to have been left behind. Remove it. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
ef1a99c65e |
net: mscc: ocelot: fix duplicate driver name error
When compiling a kernel which has both CONFIG_NET_DSA_MSCC_OCELOT_EXT
and CONFIG_MSCC_OCELOT_SWITCH enabled, the following error message will
be printed:
[ 5.266588] Error: Driver 'ocelot-switch' is already registered, aborting...
Rename the ocelot_ext.c driver to "ocelot-ext-switch" to avoid the name
duplication, and update the mfd_cell entry for its resources.
Fixes:
|
||
|
Vladimir Oltean
|
940af26132 |
net: dsa: felix: fix internal MDIO controller resource length
The blamed commit did not properly convert the resource start/end format
into the DEFINE_RES_MEM_NAMED() start/length format, resulting in a
resource for vsc9959_imdio_res which is much longer than expected:
$ cat /proc/iomem
1f8000000-1f815ffff : pcie@1f0000000
1f8140000-1f815ffff : 0000:00:00.5
1f8148030-1f815006f : imdio
vs (correct)
$ cat /proc/iomem
1f8000000-1f815ffff : pcie@1f0000000
1f8140000-1f815ffff : 0000:00:00.5
1f8148030-1f814803f : imdio
Luckily it's not big enough to exceed the size of the parent resource
(pci_resource_end(pdev, VSC9959_IMDIO_PCI_BAR)), and it doesn't overlap
with anything else that the Linux driver uses currently, so the larger
than expected size isn't a practical problem that I can see. Although it
is clearly wrong in the /proc/iomem output.
Fixes:
|
||
|
Vladimir Oltean
|
0322ef49c1 |
net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
During the refactoring in the commit below, vsc9953_mdio_read() was replaced with mscc_miim_read(), which has one extra step: it checks for the MSCC_MIIM_DATA_ERROR bits before returning the result. On T1040RDB, there are 8 QSGMII PCSes belonging to the switch, and they are organized in 2 groups. First group responds to MDIO addresses 4-7 because QSGMIIACR1[MDEV_PORT] is 1, and the second group responds to MDIO addresses 8-11 because QSGMIIBCR1[MDEV_PORT] is 2. I have double checked that these values are correctly set in the SERDES, as well as PCCR1[QSGMA_CFG] and PCCR1[QSGMB_CFG] are both 0b01. mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 4 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 4 reg 0x5 MIIM_DATA 0x3da01, ERROR mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR As can be seen, the data in MIIM_DATA is still valid despite having the MSCC_MIIM_DATA_ERROR bits set. The driver as introduced in commit |
||
|
Lorenzo Bianconi
|
cf45efcb25 |
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
Fix the following use-after-free issue in mt76u_free_rx_queue routine:
usb 3-3.3.4: reset high-speed USB device number 8 using xhci_hcd
iwlwifi 0000:05:00.0: Detected RF HR B3, rfid=0x10a100
iwlwifi 0000:05:00.0: base HW address: 50:eb:71:79:02:57
iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0
mt76x2u 3-3.3.4:1.0: ASIC revision: 76320044
usb 3-3.3.1: 1:3 : unsupported format bits 0x100000000
mt76x2u 3-3.3.4:1.0: could not get hardware semaphore for ROM PATCH
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 13 PID: 983 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110
Modules linked in: snd_seq_midi snd_seq_midi_event mt76x2u(+)
mt76x2_common mt76x02_usb mt76_usb iwlmvm mt76x02_lib mt76
snd_hda_codec_realtek intel_rapl_msr snd_hda_codec_generic
snd_hda_codec_hdmi intel_rapl_common snd_hda_intel mac80211
snd_intel_dspcfg snd_usb_audio(+) snd_intel_sdw_acpi btusb
edac_mce_amd snd_hda_codec btrtl btbcm snd_usbmidi_lib snd_hda_core
btintel snd_rawmidi btmtk snd_hwdep libarc4 mc iwlwifi kvm_amd snd_seq
vfat bluetooth eeepc_wmi asus_ec_sensors snd_seq_device fat kvm
cfg80211 asus_wmi snd_pcm irqbypass ledtrig_audio sparse_keymap rapl
wmi_bmof platform_profile xpad snd_timer k10temp ff_memless i2c_piix4
rfkill snd joydev soundcore acpi_cpufreq loop zram amdgpu
crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni
polyval_generic drm_ttm_helper ttm video iommu_v2 ucsi_ccg drm_buddy
gpu_sched typec_ucsi ghash_clmulni_intel drm_display_helper igb
sha512_ssse3 typec ccp nvme cec sp5100_tco nvme_core dca nvme_common
wmi ip6_tables ip_tables fuse
BTRFS info (device nvme1n1): enabling ssd optimizations
CPU: 13 PID: 983 Comm: (udev-worker) Tainted: G W L
------- --- 6.3.0-0.rc0.20230222git5b7c4cabbb65.3.fc39.x86_64+debug
BTRFS info (device nvme1n1): auto enabling async discard
Hardware name: System manufacturer System Product Name/ROG STRIX
X570-I GAMING, BIOS 4601 02/02/2023
RIP: 0010:refcount_warn_saturate+0xba/0x110
Code: 01 01 e8 69 a6 83 ff 0f 0b e9 52 f4 85 00 80 3d 69 6f ec 01 00
75 85 48 c7 c7 d0 25 b3 a9 c6 05 59 6f ec 01 01 e8 46 a6 83 ff <0f> 0b
e9 2f f4 85 00 80 3d 47 6f ec 01 00 0f 85 5e ff ff ff 48 c7
RSP: 0018:ffffb4010456fb78 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000080000000 RCX: 0000000000000000
RDX: 0000000000000002 RSI: ffffffffa9b17e3e RDI: 00000000ffffffff
RBP: ffff8d15877336c0 R08: 0000000000000000 R09: ffffb4010456fa00
R10: 0000000000000003 R11: ffff8d246e2fffe8 R12: 0000000000000080
R13: ffff8d15b42fd000 R14: 0000000000000000 R15: ffff8d1587736a58
FS: 00007fc05ae34940(0000) GS:ffff8d2425e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d801f1d540 CR3: 000000011df60000 CR4: 0000000000350ee0
Call Trace:
<TASK>
mt76u_queues_deinit+0x2a0/0x370 [mt76_usb]
mt76x2u_probe+0xf3/0x130 [mt76x2u]
usb_probe_interface+0xe8/0x300
really_probe+0x1b6/0x410
__driver_probe_device+0x78/0x170
driver_probe_device+0x1f/0x90
__driver_attach+0xd2/0x1c0
? __pfx___driver_attach+0x10/0x10
bus_for_each_dev+0x8a/0xd0
bus_add_driver+0x141/0x230
driver_register+0x77/0x120
usb_register_driver+0xaf/0x170
? __pfx_init_module+0x10/0x10 [mt76x2u]
do_one_initcall+0x6e/0x350
do_init_module+0x4a/0x220
__do_sys_init_module+0x192/0x1c0
? lock_is_held_type+0xce/0x120
do_syscall_64+0x5b/0x80
? lock_is_held_type+0xce/0x120
? asm_exc_page_fault+0x22/0x30
? lockdep_hardirqs_on+0x7d/0x100
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fc05b1351be
Code: 48 8b 0d 4d 0c 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f
84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 8b 0d 1a 0c 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd947c0988 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
RAX: ffffffffffffffda RBX: 000055d801f2b090 RCX: 00007fc05b1351be
RDX: 00007fc05b65c07d RSI: 00000000000234be RDI: 000055d802c6b170
RBP: 00007ffd947c0a40 R08: 000055d8019b4690 R09: 0000000000022000
R10: 000000055d8019b4 R11: 0000000000000246 R12: 00007fc05b65c07d
R13: 0000000000020000 R14: 000055d801f39770 R15: 000055d801f47780
</TASK>
irq event stamp: 186313
hardirqs last enabled at (186323): [<ffffffffa81c675e>]
__up_console_sem+0x5e/0x70
hardirqs last disabled at (186332): [<ffffffffa81c6743>]
__up_console_sem+0x43/0x70
softirqs last enabled at (186022): [<ffffffffa811d2f7>]
__irq_exit_rcu+0xd7/0x160
softirqs last disabled at (186017): [<ffffffffa811d2f7>]
__irq_exit_rcu+0xd7/0x160
---[ end trace 0000000000000000 ]---
mt76x2u: probe of 3-3.3.4:1.0 failed with error -110
usbcore: registered new interface driver mt76x2u
kauditd_printk_skb: 32 callbacks suppressed
Fixes:
|
||
|
Michal Schmidt
|
aaa3c08ee0 |
qede: avoid uninitialized entries in coal_entry array
Even after commit |
||
|
David S. Miller
|
5064561090 |
Merge tag 'mlx5-fixes-2023-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahemeed says: ==================== mlx5 fixes 2023-02-24 V1->V2: - Toss away arguably non-fixes patches This series provides bug fixes for mlx5 driver. Please pull and let me know if there is any problem. ==================== |
||
|
Fedor Pchelkin
|
25ff6f8a5a |
nfc: fix memory leak of se_io context in nfc_genl_se_io
The callback context for sending/receiving APDUs to/from the selected
secure element is allocated inside nfc_genl_se_io and supposed to be
eventually freed in se_io_cb callback function. However, there are several
error paths where the bwi_timer is not charged to call se_io_cb later, and
the cb_context is leaked.
The patch proposes to free the cb_context explicitly on those error paths.
At the moment we can't simply check 'dev->ops->se_io()' return value as it
may be negative in both cases: when the timer was charged and was not.
Fixes:
|
||
|
Jacob Keller
|
cf871006c0 |
ice: remove unnecessary CONFIG_ICE_GNSS
CONFIG_ICE_GNSS was added by commit |
||
|
Marek Vasut
|
3e62aba828 |
media: imx-mipi-csis: Check csis_fmt validity before use
The find_csis_format() may return NULL in case supported format is not
found, check the return value of find_csis_format() before using the
result to avoid NULL pointer dereference.
Fixes:
|
||
|
Hans Verkuil
|
68e87ebf26 |
media: v4l2-subdev.c: clear stream field
Both userspace and kernelspace can pass structs with an uninitialized 'stream' field. Since the check_state() function checks for a non-zero stream field, suddenly these calls will fails with -EINVAL. So check in the wrapper functions in v4l2-subdev.c (which are used by both the kernel and userspace API) if V4L2_SUBDEV_FL_STREAMS is set, and if not, then zero the stream field. Currently no drivers set V4L2_SUBDEV_FL_STREAMS, so the stream field will always be set to 0. This patch might well be reverted in the future when streams support is fully enabled and we finalized the userspace API support for this feature. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
|
Linus Torvalds
|
1ec35eadc3 |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have one small patch to the clk core this time around. It fixes a
corner case with the CLK_OPS_PARENT_ENABLE flag combined with
clk_core_is_enabled() where it hangs the system. We'll simply assume
the clk is disabled if the parent is disabled and the flag is set.
Trying to turn on the parent to check the enable state of the clk runs
into system hangs at boot. We let this bake in -next for a couple
weeks to make sure there aren't any more issues because the last
attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around
sync_state and disabling unused clks, but I asked for that to be
reverted from the qcom PR because it isn't ready and we're still
discussing the best solution on the list.
Outside of the core clk framework, we have the usual collection of clk
driver updates and support for new SoCs (which seems to never stop).
The dirstat is dominated by Qualcomm because they added support for
quite a few SoCs this time around and also migrated quite a few of
their drivers to clk_parent_data. The other big diff is in the
Mediatek clk drivers that saw a significant rework this cycle to
similarly modernize the code, and we'll see that work continue in the
next cycle as well. Nothing really jumps out as scary here, except
that the significant churn in parent data descriptions can have typos
that go unnoticed. More details below.
Core:
- Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers:
- Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
ref clocks
- Support for Mediatek MT7891 SoC clks
- Support for many Qualcomm clk controllers:
- QDU1000/QRU1000 global clock controller
- SA8775P global clock controller
- SM8550 TCSR and display clock controller
- SM6350 clock controller
- MSM8996 CBF and APCS clock controllers
Updates:
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Versa 5P49V60 clks
- Disable R-Car H3 ES1.*, as it was only available to an internal
development group and needed a lot of quirks and workarounds
- Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
resets on Renesas RZ/V2M
- Add display clocks on Renesas R-Car V4H
- Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
- Free the imx_uart_clocks even if imx_register_uart_clocks returns
early
- Get the stdout clocks count from device tree on i.MX
- Drop the clock count argument from imx_register_uart_clocks()
- Keep the uart clocks on i.MX93 for when earlycon is used
- Fix SPDX comment in i.MX6SLL clocks bindings header
- Drop some unnecessary spaces from i.MX8ULP clocks bindings header
- Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
not configured via devicetree
- Fix the ENET1 gate configuration for i.MX6UL according to the
reference manual
- Add ENET refclock mux support for i.MX6UL
- Add support for USB host/device configuration on Renesas RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
V4H
- Add D1 CAN bus gates and resets for Allwinner
- Mark D1 CPUX clock as critical on Allwinner
- Reuse D1 driver for Allwinner R528/T113
- Cleanup sunxi-ng Kconfig
- Fix sunxi-ng kernel-doc issues
- Model Allwinner H3/H5 DRAM clock as fixed clock
- Use .determine_rate() instead of .round_rate() for the dualdiv,
mpll, sclk-div and cpu-dyn-div amlogic clock drivers
- DDR clocks were marked as critical in the proper clock driver for
each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
in the next releases as it only does clock enablement
- Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
of them may use it
- Support synchronous power_off requests in the qcom GDSC driver for
proper GPU power collapse
- Drop test clocks from various Qualcomm clk drivers
- Update parent references to use clk_parent_data/clk_hw in various
Qualcomm clk drivers
- Fixes for the Qualcomm MSM8996 CPU clock controller
- Transition Qualcomm MSM8974 GCC off the externally defined
sleep_clk
- Add GDSCs in the global clock controller for Qualcomm QCS404
- The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
- Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
SDM845 are moved to use the recently introduced properties in the
GDSC struct
- Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
the IPA clock is added on a variety of platforms
- De-duplicate identical clks in Qualcomm SMD RPM clk driver
- Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
to Qualcomm SDM RPM clk driver
- Various Qualcomm clk drivers use devm_pm_runtime_enable() to
simplify"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
clk: qcom: Revert sync_state based clk_disable_unused
clk: imx: pll14xx: fix recalc_rate for negative kdiv
clk: rs9: Drop unused pin_xin field
MAINTAINERS: clk: imx: Add Peng Fan as reviewer
clk: sprd: Add dependency for SPRD_UMS512_CLK
clk: ralink: fix 'mt7621_gate_is_enabled()' function
clk: mediatek: clk-mtk: Remove unneeded semicolon
dt-bindings: clock: remove stih416 bindings
dt-bindings: clock: add loongson-2 clock
dt-bindings: clock: add loongson-2 clock include file
clk: imx: fix compile testing imxrt1050
clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
...
|
||
|
Linus Torvalds
|
562ed38ded |
Merge tag 'mailbox-v6.3' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar: - qcom: misc changes to bindings for sa8775p, QDU1000/QRU1000, IPQ5332, SDX55, msm8976, glink-rpm-edge - sti: convert to DT schema - zynq: switch to flexible array to simplify code * tag 'mailbox-v6.3' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom-ipcc: Add compatible for QDU1000/QRU1000 mailbox: qcom-apcs-ipc: add IPQ5332 APSS clock support dt-bindings: mailbox: qcom: add compatible for the IPQ5332 SoC dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema mailbox: qcom-apcs-ipc: enable APCS clock device for MSM8996 dt-bindings: mailbox: qcom: add #clock-cells to msm8996 example dt-bindings: mailbox: qcom: add missing platforms to conditional clauses dt-bindings: mailbox: qcom: correct the list of platforms using clocks dt-bindings: mailbox: qcom: enable syscon compatible for msm8976 dt-bindings: mailbox: qcom: add SDX55 compatible dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform dt-bindings: mailbox: sti-mailbox: convert to DT schema mailbox: zynq: Switch to flexible array to simplify code |
||
|
Linus Torvalds
|
2e3036a264 |
Merge tag 'mtd/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD changes:
- parsers: ofpart: add workaround for #size-cells 0
- dt-bindings: partitions: Fix partition node name pattern
- dataflash: remove duplicate SPI ID table
Raw NAND core changes:
- Check the data only read pattern only once
- Prepare the late addition of supported operation checks
- Support for sequential cache reads
- Fix nand_chip kdoc
Raw NAND driver changes:
- Fsl_elbc: Propagate HW ECC settings to HW
- Marvell: Add missing layouts
- Pasemi: Don't use static data to track per-device state
- Sunxi:
- Fix the size of the last OOB region
- Remove an unnecessary check
- Remove an unnecessary check
- Clean up chips after failed init
- Precompute the ECC_CTL register value
- Embed sunxi_nand_hw_ecc by value
- Update OOB layout to match hardware
- tmio_nand: Remove driver
- vf610_nfc: Use regular comments for functions
SPI-NAND driver changes:
- Add support for AllianceMemory AS5F34G04SND
- Macronix: use scratch buffer for DMA operation
NAND ECC changes:
- Mediatek:
- Add ECC support fot MT7986 IC
- Add compatible for MT7986
- dt-bindings: Split ECC engine with rawnand controller
SPI NOR changes:
- Misc core fixes
SPI NOR driver changes:
- Spansion: Minor fixes"
* tag 'mtd/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (33 commits)
mtd: parsers: ofpart: add workaround for #size-cells 0
mtd: rawnand: sunxi: Precompute the ECC_CTL register value
mtd: rawnand: sunxi: Embed sunxi_nand_hw_ecc by value
mtd: rawnand: sunxi: Update OOB layout to match hardware
mtd: spi-nor: Sort headers alphabetically
mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type
mtd: nand: ecc-mtk: Add ECC support fot MT7986 IC
dt-bindings: mtd: mediatek,nand-ecc-engine: Add compatible for MT7986
dt-bindings: mtd: Split ECC engine with rawnand controller
mtd: rawnand: fsl_elbc: Propagate HW ECC settings to HW
mtd: spinand: Add support for AllianceMemory AS5F34G04SND
dt-bindings: mtd: partitions: Fix partition node name pattern
mtd: spi-nor: Create macros to define chip IDs and geometries
mtd: spi-nor: spansion: Make CFRx reg fields generic
mtd: spi-nor: spansion: Consider reserved bits in CFR5 register
mtd: spi-nor: core: fix implicit declaration warning
mtd: spinand: macronix: use scratch buffer for DMA operation
mtd: rawnand: Fix nand_chip kdoc
mtd: rawnand: vf610_nfc: use regular comments for functions
mtd: rawnand: Support for sequential cache reads
...
|
||
|
Linus Torvalds
|
60e2bf7d10 |
Merge tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - a set of tweaks to iqs269a touch controller driver - a fix for ads7846 driver to properly handle 7845 chip - cap11xx driver will support cap1203, cap1293 and cap1298 models - xpad driver will support 8BitDo Pro 2 Wired Controller - input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() - other miscellaneous fixes and tweaks * tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (113 commits) dt-bindings: input: iqs626a: Redefine trackpad property types Input: iqs626a - drop unused device node references dt-bindings: input: touchscreen: st,stmfts: convert to dtschema Input: cyttsp5 - fix bitmask for touch buttons Input: exc3000 - properly stop timer on shutdown Input: synaptics-rmi4 - fix SPI device ID Input: cap11xx - add support for cap1203, cap1293 and cap1298 dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298 Input: pmic8xxx-keypad - fix a Kconfig spelling mistake & hyphenation Input: edt-ft5x06 - fix typo in a comment Input: tegra-kbc - use devm_platform_get_and_ioremap_resource() Input: st-keyscan - use devm_platform_get_and_ioremap_resource() Input: spear-keyboard - use devm_platform_get_and_ioremap_resource() Input: olpc_apsp - use devm_platform_get_and_ioremap_resource() Input: arc_ps2 - use devm_platform_get_and_ioremap_resource() Input: apbps2 - use devm_platform_get_and_ioremap_resource() Input: altera_ps2 - use devm_platform_get_and_ioremap_resource() Input: ads7846 - don't check penirq immediately for 7845 Input: ads7846 - always set last command to PWRDOWN Input: ads7846 - don't report pressure for ads7845 ... |
||
|
Linus Torvalds
|
472a2abb7a |
Merge tag 'flex-array-transformations-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array updates from Gustavo Silva: "Transform zero-length arrays, in unions, into flexible arrays" * tag 'flex-array-transformations-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: bcache: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper mm/memremap: Replace zero-length array with DECLARE_FLEX_ARRAY() helper exportfs: Replace zero-length array with DECLARE_FLEX_ARRAY() helper |
||
|
Linus Torvalds
|
cac85e4616 |
Merge tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson: - Remove redundant resource check in vfio-platform (Angus Chen) - Use GFP_KERNEL_ACCOUNT for persistent userspace allocations, allowing removal of arbitrary kernel limits in favor of cgroup control (Yishai Hadas) - mdev tidy-ups, including removing the module-only build restriction for sample drivers, Kconfig changes to select mdev support, documentation movement to keep sample driver usage instructions with sample drivers rather than with API docs, remove references to out-of-tree drivers in docs (Christoph Hellwig) - Fix collateral breakages from mdev Kconfig changes (Arnd Bergmann) - Make mlx5 migration support match device support, improve source and target flows to improve pre-copy support and reduce downtime (Yishai Hadas) - Convert additional mdev sysfs case to use sysfs_emit() (Bo Liu) - Resolve copy-paste error in mdev mbochs sample driver Kconfig (Ye Xingchen) - Avoid propagating missing reset error in vfio-platform if reset requirement is relaxed by module option (Tomasz Duszynski) - Range size fixes in mlx5 variant driver for missed last byte and stricter range calculation (Yishai Hadas) - Fixes to suspended vaddr support and locked_vm accounting, excluding mdev configurations from the former due to potential to indefinitely block kernel threads, fix underflow and restore locked_vm on new mm (Steve Sistare) - Update outdated vfio documentation due to new IOMMUFD interfaces in recent kernels (Yi Liu) - Resolve deadlock between group_lock and kvm_lock, finally (Matthew Rosato) - Fix NULL pointer in group initialization error path with IOMMUFD (Yan Zhao) * tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfio: (32 commits) vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd docs: vfio: Update vfio.rst per latest interfaces vfio: Update the kdoc for vfio_device_ops vfio/mlx5: Fix range size calculation upon tracker creation vfio: no need to pass kvm pointer during device open vfio: fix deadlock between group lock and kvm lock vfio: revert "iommu driver notify callback" vfio/type1: revert "implement notify callback" vfio/type1: revert "block on invalid vaddr" vfio/type1: restore locked_vm vfio/type1: track locked_vm per dma vfio/type1: prevent underflow of locked_vm via exec() vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR vfio: platform: ignore missing reset if disabled at module init vfio/mlx5: Improve the target side flow to reduce downtime vfio/mlx5: Improve the source side flow upon pre_copy vfio/mlx5: Check whether VF is migratable samples: fix the prompt about SAMPLE_VFIO_MDEV_MBOCHS vfio/mdev: Use sysfs_emit() to instead of sprintf() vfio-mdev: add back CONFIG_VFIO dependency ... |
||
|
Linus Torvalds
|
84cc6674b7 |
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin: - device feature provisioning in ifcvf, mlx5 - new SolidNET driver - support for zoned block device in virtio blk - numa support in virtio pmem - VIRTIO_F_RING_RESET support in vhost-net - more debugfs entries in mlx5 - resume support in vdpa - completion batching in virtio blk - cleanup of dma api use in vdpa - now simulating more features in vdpa-sim - documentation, features, fixes all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits) vdpa/mlx5: support device features provisioning vdpa/mlx5: make MTU/STATUS presence conditional on feature bits vdpa: validate device feature provisioning against supported class vdpa: validate provisioned device features against specified attribute vdpa: conditionally read STATUS in config space vdpa: fix improper error message when adding vdpa dev vdpa/mlx5: Initialize CVQ iotlb spinlock vdpa/mlx5: Don't clear mr struct on destroy MR vdpa/mlx5: Directly assign memory key tools/virtio: enable to build with retpoline vringh: fix a typo in comments for vringh_kiov vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails scsi: virtio_scsi: fix handling of kmalloc failure vdpa: Fix a couple of spelling mistakes in some messages vhost-net: support VIRTIO_F_RING_RESET vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit vdpa: mlx5: support per virtqueue dma device vdpa: set dma mask for vDPA device virtio-vdpa: support per vq dma device vdpa: introduce get_vq_dma_device() ... |
||
|
Linus Torvalds
|
49d5759268 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
|
||
|
Linus Torvalds
|
d0a32f5520 |
Merge tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman: - Support for configuring secure boot with user-defined keys on PowerVM LPARs - Simplify the replay of soft-masked IRQs by making it non-recursive - Add support for KCSAN on 64-bit Book3S - Improvements to the API & code which interacts with RTAS (pseries firmware) - Change 32-bit powermac to assign PCI bus numbers per domain by default - Some improvements to the 32-bit BPF JIT - Various other small features and fixes Thanks to Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain, Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, and Sudhakar Kuppusamy. * tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (114 commits) powerpc/pseries: Avoid hcall in plpks_is_available() on non-pseries powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot powerpc/e500: Add missing prototype for 'relocate_init' powerpc/64: Fix unannotated intra-function call warning powerpc/epapr: Don't use wrteei on non booke powerpc: Pass correct CPU reference to assembler powerpc/mm: Rearrange if-else block to avoid clang warning powerpc/nohash: Fix build with llvm-as powerpc/nohash: Fix build error with binutils >= 2.38 powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags macintosh: windfarm: Use unsigned type for 1-bit bitfields powerpc/kexec_file: print error string on usable memory property update failure powerpc/machdep: warn when machine_is() used too early powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500 powerpc/eeh: Set channel state after notifying the drivers selftests/powerpc: Fix incorrect kernel headers search path powerpc/rtas: arch-wide function token lookup conversions powerpc/rtas: introduce rtas_function_token() API powerpc/pseries/lpar: convert to papr_sysparm API powerpc/pseries/hv-24x7: convert to papr_sysparm API ... |
||
|
Linus Torvalds
|
7c3dc440b1 |
Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dan Williams:
"To date Linux has been dependent on platform-firmware to map CXL RAM
regions and handle events / errors from devices. With this update we
can now parse / update the CXL memory layout, and report events /
errors from devices. This is a precursor for the CXL subsystem to
handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
for DDR-attached-DRAM is handled by the EDAC driver where it maps
system physical address events to a field-replaceable-unit (FRU /
endpoint device). In general, CXL has the potential to standardize
what has historically been a pile of memory-controller-specific error
handling logic.
Another change of note is the default policy for handling RAM-backed
device-dax instances. Previously the default access mode was "device",
mmap(2) a device special file to access memory. The new default is
"kmem" where the address range is assigned to the core-mm via
add_memory_driver_managed(). This saves typical users from wondering
why their platform memory is not visible via free(1) and stuck behind
a device-file. At the same time it allows expert users to deploy
policy to, for example, get dedicated access to high performance
memory, or hide low performance memory from general purpose kernel
allocations. This affects not only CXL, but also systems with
high-bandwidth-memory that platform-firmware tags with the
EFI_MEMORY_SP (special purpose) designation.
Summary:
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
for setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL
HDM Decoder Capability to translate the CXL DVSEC Range Registers
into 'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of
hotplug, or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug
message improvements"
* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
dax/kmem: Fix leak of memory-hotplug resources
cxl/mem: Add kdoc param for event log driver state
cxl/trace: Add serial number to trace points
cxl/trace: Add host output to trace points
cxl/trace: Standardize device information output
cxl/pci: Remove locked check for dvsec_range_allowed()
cxl/hdm: Add emulation when HDM decoders are not committed
cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
cxl/hdm: Emulate HDM decoder from DVSEC range registers
cxl/pci: Refactor cxl_hdm_decode_init()
cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
cxl: add RAS status unmasking for CXL
cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
dax/hmem: build hmem device support as module if possible
dax: cxl: add CXL_REGION dependency
cxl: avoid returning uninitialized error code
cxl/pmem: Fix nvdimm registration races
cxl/mem: Fix UAPI command comment
cxl/uapi: Tag commands from cxl_query_cmd()
...
|
||
|
Nick Child
|
6f2ce45f0c |
ibmvnic: Assign XPS map to correct queue index
When setting the XPS map value for TX queues, use the index of the
transmit queue.
Previously, the function was passing the index of the loop that iterates
over all queues (RX and TX). This was causing invalid XPS map values.
Fixes:
|
||
|
Linus Torvalds
|
595fa4e313 |
Merge tag 'soundwire-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"This is a small update which features a bit of core changes and driver
updates in Intel and cadence driver.
Core:
- sdw_transfer_defer() API change to drop an argument
- Reset page address rework
- Export sdw_nwrite_no_pm and sdw_nread_no_pm APIs
Drivers:
- Cadence and related intel driver updates for FIFO handling and low
level msg transfers"
* tag 'soundwire-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: cadence: further simplify low-level xfer_msg_defer() callback
soundwire: cadence: use directly bus sdw_defer structure
soundwire: bus: remove sdw_defer argument in sdw_transfer_defer()
soundwire: stream: use consistent pattern for freeing buffers
soundwire: bus: Remove unused reset_page_addr() callback
soundwire: bus: Don't zero page registers after every transaction
soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe()
soundwire: stream: Move remaining register accesses over to no_pm
soundwire: debugfs: Switch to sdw_read_no_pm
soundwire: Provide build stubs for common functions
soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions
soundwire: cadence: remove unused sdw_cdns_master_ops declaration
soundwire: enable optional clock registers for SoundWire 1.2 devices
ASoC/soundwire: remove is_sdca boolean property
soundwire: cadence: Drain the RX FIFO after an IO timeout
soundwire: cadence: Remove wasted space in response_buf
soundwire: cadence: Don't overflow the command FIFOs
soundwire: intel: remove DAI startup/shutdown
|
||
|
Linus Torvalds
|
8ff99ad04c |
Merge tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"This features a bunch of new device support, a couple of new drivers,
yaml conversion and updates of a few drivers.
Core support:
- New devm_of_phy_optional_get() API with users and conversion
New hardware support:
- Mediatek MT7986 phy support
- Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250 USB3
phy support, SM6350 combo phy support, SM6125 UFS PHY support amd
SM8350 & SM8450 combo phy support
- Qualcomm SNPS eUSB2 eUSB2 repeater drivers
- Allwinner F1C100s USB PHY support
- Tegra xusb support for Tegra234
Updates:
- Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy
- G4 mode support in Qualcomm UFS phy and support for various SoCs
- Yaml conversion for Meson usb2 phy
- TI Type C support for usb phy for j721
- Yaml conversion for Tegra xusb binding"
* tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (106 commits)
phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater
phy: qcom: Add QCOM SNPS eUSB2 repeater driver
dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeater
dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file
dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional phy-supply property
phy: rockchip-typec: Fix unsigned comparison with less than zero
phy: rockchip-typec: fix tcphy_get_mode error case
phy: qcom: snps-eusb2: Add missing headers
phy: qcom-qmp-combo: Add support for SM8550
phy: qcom-qmp: Add v6 DP register offsets
phy: qcom-qmp: pcs-usb: Add v6 register offsets
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Document SM8550 compatible
phy: qcom: Add QCOM SNPS eUSB2 driver
dt-bindings: phy: Add qcom,snps-eusb2-phy schema file
phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs
phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets
phy: qcom-qmp: pcs-pcie: Add v6 register offsets
phy: qcom-qmp: pcs: Add v6.20 register offsets
...
|
||
|
Linus Torvalds
|
9e6bfd42b1 |
Merge tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul: "A new driver, couple of device support and binding conversion along with bunch of driver updates are the main features of this. New hardware support: - TI AM62Ax controller support - Xilinx xdma driver - Qualcomm SM6125, SM8550, QDU1000/QRU1000 GPI controller Updates: - Runtime pm support for at_xdmac driver - IMX sdma binding conversion to yaml and HDMI audio support - IMX mxs binding conversion to yaml" * tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits) dmaengine: idma64: Update bytes_transferred field dmaengine: imx-sdma: Set DMA channel to be private dmaengine: dw: Move check for paused channel to dwc_get_residue() dmaengine: ptdma: check for null desc before calling pt_cmd_callback dmaengine: dw-axi-dmac: Do not dereference NULL structure dmaengine: idxd: Fix default allowed read buffers value in group dmaengine: sf-pdma: pdma_desc memory leak fix dmaengine: Simplify dmaenginem_async_device_register() function dmaengine: use sysfs_emit() to instead of scnprintf() dmaengine: Make an order in struct dma_device definition dt-bindings: dma: cleanup examples - indentation, lowercase hex dt-bindings: dma: drop unneeded quotes dmaengine: xilinx: xdma: Add user logic interrupt support dmaengine: xilinx: xdma: Add xilinx xdma driver dmaengine: drivers: Use devm_platform_ioremap_resource() dmaengine: at_xdmac: remove empty line dmaengine: at_xdmac: add runtime pm support dmaengine: at_xdmac: align properly function members dmaengine: ppc4xx: Convert to use sysfs_emit()/sysfs_emit_at() APIs dmaengine: sun6i: Set the maximum segment size ... |
||
|
Linus Torvalds
|
008128cd59 |
Merge tag 'i2c-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - new drivers for HPE GXP and Loongson 2K/LS7A - bigger refactorings for i801 and xiic - gpio driver gained ACPI and SDA-write only support - the core converted some OF helpers to fwnode helpers - usual bunch of driver updates * tag 'i2c-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) MAINTAINERS: Add HPE GXP I2C Support i2c: Add GXP SoC I2C Controller dt-bindings: i2c: Add hpe,gxp-i2c i2c: xiic: Remove some dead code i2c: xiic: Add SCL frequency configuration support i2c: xiic: Update compatible with new IP version dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible i2c: i801: Call i801_check_post() from i801_access() i2c: i801: Call i801_check_pre() from i801_access() i2c: i801: Centralize configuring block commands in i801_block_transaction i2c: i801: Centralize configuring non-block commands in i801_simple_transaction i2c: i801: Handle SMBAUXCTL_E32B in i801_block_transaction_by_block only i2c: i801: Add i801_simple_transaction(), complementing i801_block_transaction() Documentation: i2c: correct spelling dt-bindings: i2c: i2c-st: convert to DT schema i2c: i801: add helper i801_set_hstadd() i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ i2c: i801: improve interrupt handler i2c: st: use pm_sleep_ptr to avoid ifdef CONFIG_PM_SLEEP ... |
||
|
Linus Torvalds
|
39f013440d |
Merge tag 'for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel: "Nothing special for the power-supply subystem this time. - power-supply core: remove faulty cooling logic - convert all sysfs show() handlers from *printf() use sysfs_emit() - bq25890: add dual-charger support required by Lenovo Yoga Tab 3 Pro - bq27xxx: fix reporting critical level - syscon-reboot: add priority property support - new rt9467 charger driver - new rt9471 charger driver - new Odroid Go Ultra poweroff driver - misc minor fixes and cleanups" * tag 'for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: reset: odroid-go-ultra: fix I2C dependency power: supply: leds: explicitly include linux/leds.h dt-bindings: power: supply: pm8941-coincell: Don't require charging properties dt-bindings: power: supply: pm8941-coincell: Add PM8998 compatible power: reset: add Odroid Go Ultra poweroff driver power: supply: rt9467: Fix spelling mistake "attache" -> "attach" power: supply: rt9471: fix using wrong ce_gpio in rt9471_probe() power: supply: max77650: Make max77650_charger_disable() return void Documentation: power: rt9467: Document exported sysfs entries power: supply: rt9467: Add Richtek RT9467 charger driver dt-bindings: power: supply: Add Richtek RT9467 battery charger Documentation: power: rt9471: Document exported sysfs entries power: supply: rt9471: Add Richtek RT9471 charger driver dt-bindings: power: supply: Add Richtek RT9471 battery charger power: supply: max1721x: Use strscpy() is more robust and safer power: supply: test-power: use strscpy() instead of strncpy() power: supply: bq27xxx: fix reporting critical level power: supply: bq256xx: Init ichg/vbat value with chip default value power: supply: collie_battery: Convert to GPIO descriptors (part 2) power: supply: remove faulty cooling logic ... |
||
|
Linus Torvalds
|
90ddb3f034 |
Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Rework portdrv shutdown so it disables interrupts but doesn't
disable bus mastering, which leads to hangs on Loongson LS7A
- Add mechanism to prevent Max_Read_Request_Size (MRRS) increases,
again to avoid hardware issues on Loongson LS7A (and likely other
devices based on DesignWare IP)
- Ignore devices with a firmware (DT or ACPI) node that says the
device is disabled
Resource management:
- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better. Tried this in v6.1 but had
to revert for regressions, so try again
- Fix root bus issue that dropped resources that happened to end
at 0, e.g., [bus 00]
PCI device hotplug:
- Remove device locking when marking device as disconnected so this
doesn't have to wait for concurrent driver bind/unbind to complete
- Quirk more Qualcomm bridges that don't fully implement the PCIe
Slot Status 'Command Completed' bit
Power management:
- Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we
don't miss hot-add notifications for USB4 docks, Thunderbolt, etc
Reset:
- Observe delay after reset, e.g., resuming from system sleep,
regardless of whether a bridge can suspend to D3cold at runtime
- Wait for secondary bus to become ready after a bridge reset
Virtualization:
- Avoid FLR on some AMD FCH AHCI adapters where it doesn't work
- Allow independent IOMMU groups for some Wangxun NICs that prevent
peer-to-peer transactions but don't advertise an ACS Capability
Error handling:
- Configure End-to-End-CRC (ECRC) only if Linux owns the AER
Capability
- Remove redundant Device Control Error Reporting Enable in the AER
service driver since this is already done for all devices during
enumeration
ASPM:
- Add pci_enable_link_state() interface to allow drivers to enable
ASPM link state
Endpoint framework:
- Move dra7xx and tegra194 linkup processing from hard IRQ to
threaded IRQ handler
- Add a separate lock for endpoint controller list of endpoint
function drivers to prevent deadlock in callbacks
- Pass events from endpoint controller to endpoint function drivers
via callbacks instead of notifiers
Synopsys DesignWare eDMA controller driver (acked by Vinod):
- Fix CPU vs PCI address issues
- Fix source vs destination address issues
- Fix issues with interleaved transfer semantics
- Fix channel count initialization issue (issue still exists in
several other drivers)
- Clean up and improve debugfs usage so it will work on platforms
with several eDMA devices
Baikal T-1 PCIe controller driver:
- Set a 64-bit DMA mask
Freescale i.MX6 PCIe controller driver:
- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver
support
Intel VMD host bridge driver:
- Add quirk to configure PCIe ASPM and LTR. This is normally done by
BIOS, and will be for future products
Marvell MVEBU PCIe controller driver:
- Mark this driver as broken in Kconfig since bugs prevent its daily
usage
MediaTek MT7621 PCIe controller driver:
- Delay PHY port initialization to improve boot reliability for ZBT
WE1326, ZBT WF3526-P, and some Netgear models
Qualcomm PCIe controller driver:
- Add MSM8998 DT compatible string
- Unify MSM8996 and MSM8998 clock orderings
- Add SM8350 DT binding and driver support
- Add IPQ8074 Gen3 DT binding and driver support
- Correct qcom,perst-regs in DT binding
- Add qcom_pcie_host_deinit() so the PHY is powered off and
regulators and clocks are disabled on late host-init errors
Socionext UniPhier Pro5 controller driver:
- Clean up uniphier-ep reg, clocks, resets, and their names in DT
binding
Synopsys DesignWare PCIe controller driver:
- Restrict coherent DMA mask to 32 bits for MSI, but allow controller
drivers to set 64-bit streaming DMA mask
- Add eDMA engine support in both Root Port and Endpoint controllers
Miscellaneous:
- Remove MODULE_LICENSE from boolean drivers so they don't look like
modules so modprobe can complain about them"
* tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits)
PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
PCI: bt1: Set 64-bit DMA mask
PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
dmaengine: dw-edma: Add mem-mapped LL-entries support
PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
PCI: hv: Drop duplicate PCI_MSI dependency
PCI/P2PDMA: Annotate RCU dereference
PCI/sysfs: Constify struct kobj_type pci_slot_ktype
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
PCI: qcom: Add IPQ8074 Gen3 port support
dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
dt-bindings: PCI: qcom: Sort compatibles alphabetically
PCI: qcom: Fix host-init error handling
PCI: qcom: Add SM8350 support
dt-bindings: PCI: qcom: Add SM8350
dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
...
|
||
|
Linus Torvalds
|
8cbd92339d |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Quite a small cycle this time, even with the rc8. I suppose everyone
went to sleep over xmas.
- Minor driver updates for hfi1, cxgb4, erdma, hns, irdma, mlx5, siw,
mana
- inline CQE support for hns
- Have mlx5 display device error codes
- Pinned DMABUF support for irdma
- Continued rxe cleanups, particularly converting the MRs to use
xarray
- Improvements to what can be cached in the mlx5 mkey cache"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (61 commits)
IB/mlx5: Extend debug control for CC parameters
IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors
IB/hfi1: Fix math bugs in hfi1_can_pin_pages()
RDMA/irdma: Add support for dmabuf pin memory regions
RDMA/mlx5: Use query_special_contexts for mkeys
net/mlx5e: Use query_special_contexts for mkeys
net/mlx5: Change define name for 0x100 lkey value
net/mlx5: Expose bits for querying special mkeys
RDMA/rxe: Fix missing memory barriers in rxe_queue.h
RDMA/mana_ib: Fix a bug when the PF indicates more entries for registering memory on first packet
RDMA/rxe: Remove rxe_alloc()
RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size
Subject: RDMA/rxe: Handle zero length rdma
iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry()
RDMA/mlx5: Use rdma_umem_for_each_dma_block()
RDMA/umem: Remove unused 'work' member from struct ib_umem
RDMA/irdma: Cap MSIX used to online CPUs + 1
RDMA/mlx5: Check reg_create() create for errors
RDMA/restrack: Correct spelling
RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish()
...
|
||
|
Linus Torvalds
|
143c7bc649 |
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Some polishing and small fixes for iommufd:
- Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt
subsystem
- Use GFP_KERNEL_ACCOUNT inside the iommu_domains
- Support VFIO_NOIOMMU mode with iommufd
- Various typos
- A list corruption bug if HWPTs are used for attach"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not add the same hwpt to the ioas->hwpt_list twice
iommufd: Make sure to zero vfio_iommu_type1_info before copying to user
vfio: Support VFIO_NOIOMMU with iommufd
iommufd: Add three missing structures in ucmd_buffer
selftests: iommu: Fix test_cmd_destroy_access() call in user_copy
iommu: Remove IOMMU_CAP_INTR_REMAP
irq/s390: Add arch_is_isolated_msi() for s390
iommu/x86: Replace IOMMU_CAP_INTR_REMAP with IRQ_DOMAIN_FLAG_ISOLATED_MSI
genirq/msi: Rename IRQ_DOMAIN_MSI_REMAP to IRQ_DOMAIN_ISOLATED_MSI
genirq/irqdomain: Remove unused irq_domain_check_msi_remap() code
iommufd: Convert to msi_device_has_isolated_msi()
vfio/type1: Convert to iommu_group_has_isolated_msi()
iommu: Add iommu_group_has_isolated_msi()
genirq/msi: Add msi_device_has_isolated_msi()
|
||
|
Linus Torvalds
|
a13de74e47 |
Merge tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Consolidate iommu_map/unmap functions.
There have been blocking and atomic variants so far, but that was
problematic as this approach does not scale with required new
variants which just differ in the GFP flags used. So Jason
consolidated this back into single functions that take a GFP
parameter.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
- Cater for three power domains on SM6375
- Document existing compatible strings for Qualcomm SoCs
- Tighten up clocks description for platform-specific
compatible strings
- Enable Qualcomm workarounds for some additional platforms that
need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
* tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits)
iommu/amd: Skip attach device domain is same as new domain
iommu: Attach device group to old domain in error path
iommu/vt-d: Allow to use flush-queue when first level is default
iommu/vt-d: Fix PASID directory pointer coherency
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
iommu/vt-d: Fix error handling in sva enable/disable paths
iommu/amd: Improve page fault error reporting
iommu/amd: Do not identity map v2 capable device when snp is enabled
iommu: Fix error unwind in iommu_group_alloc()
iommu/of: mark an unused function as __maybe_unused
iommu: dart: DART_T8110_ERROR range should be 0 to 5
iommu/vt-d: Enable IOMMU perfmon support
iommu/vt-d: Add IOMMU perfmon overflow handler support
iommu/vt-d: Support cpumask for IOMMU perfmon
iommu/vt-d: Add IOMMU perfmon support
iommu/vt-d: Support Enhanced Command Interface
iommu/vt-d: Retrieve IOMMU perfmon capability information
iommu/vt-d: Support size of the register set in DRHD
iommu/vt-d: Set No Execute Enable bit in PASID table entry
iommu/vt-d: Remove sva from intel_svm_dev
...
|
||
|
Linus Torvalds
|
8395d932d2 |
Merge tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add node lifecycle unit tests
- Add of_property_present() helper aligned with fwnode API
- Print more information on reserved regions on boot
- Update dtc to upstream v1.6.1-66-gabbd523bae6e
- Use strscpy() to instead of strncpy() in DT core
- Add option for schema validation on %.dtb targets
Bindings:
- Add/fix support for listing multiple patterns in DT_SCHEMA_FILES
- Rework external memory controller/bus bindings to properly support
controller specific child node properties
- Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip
RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT
schema format
- Add RiscV SBI PMU event mapping binding
- Add missing contraints on Arm SCMI child node allowed properties
- Add a bunch of missing Socionext UniPhier glue block bindings and
example fixes
- Various fixes for duplicate or conflicting type definitions on DT
properties"
* tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
dt-bindings: regulator: Add mps,mpq7932 power-management IC
of: dynamic: Fix spelling mistake "kojbect" -> "kobject"
dt-bindings: drop Sagar Kadam from SiFive binding maintainership
dt-bindings: sram: qcom,imem: document sm8450
dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
dt-bindings: arm: Add Cortex-A715 and X3
of: dynamic: add lifecycle docbook info to node creation functions
of: add consistency check to of_node_release()
of: do not use "%pOF" printk format on node with refcount of zero
of: unittest: add node lifecycle tests
of: update kconfig unittest help
of: add processing of EXPECT_NOT to of_unittest_expect
of: prepare to add processing of EXPECT_NOT to of_unittest_expect
of: Use preferred of_property_read_* functions
of: Use of_property_present() helper
of: Add of_property_present() helper
of: reserved_mem: Use proper binary prefix
dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES
of: reserved-mem: print out reserved-mem details during boot
dt-bindings: serial: restrict possible child node names
...
|
||
|
Linus Torvalds
|
a93e884edf |
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
|
||
|
Linus Torvalds
|
693fed981e |
Merge tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
|
||
|
Linus Torvalds
|
0601f25d1c |
Merge tag 'staging-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH: "Here is the "boring" staging driver update for 6.3-rc1. Nothing major in here at all, it's just lots of tiny code cleanups to bring some of the staging drivers more in line with the real portion of the kernel (apis and coding style.) Overall we remove more lines of code than we add, always a nice result. The big work was done by Martin Kaiser and Philipp Hortmann, both tackling some of the older wifi drivers, removing unused code and structures and a file in one case. Full details of the changes are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (219 commits) staging: r8188eu: Revert "staging: r8188eu: simplify rtw_get_ff_hwaddr" staging: r8188eu: replace hand coded loop with list_for_each_entry staging: r8188eu: merge _rtw_enqueue_cmd into its caller most: add maintainer entry staging: rtl8192e: Use BIT() instead of << for bit field MSR_LINK_MASK staging: rtl8192e: Rename DM_RxPathSelTable staging: rtl8192e: Rename diff_TH and disabledRF staging: rtl8192e: Rename Enable, cck_Rx_path and SS_TH_low staging: rtl8192e: Rename RateAdaptiveTH.., VeryLowRSSI and WAIotTHVal staging: rtl8192e: Rename RxPathSelectio.., RateAdaptive.. and RateAdap.. staging: rtl8192e: Rename OFDM_Table.., CCK_Table_.. and RxPathSelecti.. staging: rtl8192e: Rename MacBlkCtrl and remove double definition staging: rtl8192e: Remove blank lines in r8192E_hw.h, rtl_core.h and .. staging: rtl8192e: Rename AcmHw_ViqEn, AcmHw_VoqEn and ANAPAR_FOR_8192PciE staging: r8188eu: bagg_pkt parameter is not used staging: r8188eu: simplify rtw_get_ff_hwaddr staging: r8188eu: simplify xmit_buf flags staging: r8188eu: xmit_buf's ff_hwaddr is not used staging: r8188eu: remove unused frametag defines staging: r8188eu: simplify rtw_alloc_xmitframe ... |
||
|
Linus Torvalds
|
17cd4d6f05 |
Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH: "Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits) tty: n_gsm: add keep alive support serial: imx: remove a redundant check dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h tty: n_gsm: add TIOCMIWAIT support tty: n_gsm: add RING/CD control support tty: n_gsm: mark unusable ioctl structure fields accordingly serial: imx: get rid of registers shadowing serial: imx: refine local variables in rxint() serial: imx: stop using USR2 in FIFO reading loop serial: imx: remove redundant USR2 read from FIFO reading loop serial: imx: do not break from FIFO reading loop prematurely serial: imx: do not sysrq broken chars serial: imx: work-around for hardware RX flood serial: imx: factor-out common code to imx_uart_soft_reset() serial: 8250_pci1xxxx: Add power management functions to quad-uart driver serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver serial: 8250_pci1xxxx: Add driver for quad-uart support serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c tty: pcn_uart: fix memory leak with using debugfs_lookup() ... |