For the memory size ( > 512MB, < 1GB), the MSA setting is:
- SSEG0: PHY_START , PHY_START + 512MB
- SSEG1: PHY_START + 512MB, PHY_START + 1GB
But the real memory is no more than 1GB, there is a gap between the
end size of memory and border of 1GB. CPU could speculatively
execute to that gap and if the gap of the bus couldn't respond to
the CPU request, then the crash will happen.
Now make the setting with:
- SSEG0: PHY_START , PHY_START + 512MB (no change)
- SSEG1: Disabled (We use highmem to use the memory of 512MB~1GB)
We also deprecated zhole_szie[] settings, it's only used by arm
style CPUs. All memory gap should use Reserved setting of dts in
csky system.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Currently in the case where eq->src != req->ds, the allocation of
ptr is kfree'd at the end of the code block. However later on in
the case where enc is not null any of the error return paths that
return via the error handling return path end up performing an
erroneous second kfree of ptr.
Fix this by adding an error exit label error_free and only jump to
this when ptr needs kfree'ing thus avoiding the double free issue.
Addresses-Coverity: ("Double free")
Fixes: 10b4f09491 ("crypto: marvell - add the Virtual Function driver for CPT")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When UACCE is m, CRYPTO_DEV_HISI_QM cannot be built-in.
But CRYPTO_DEV_HISI_QM is selected by CRYPTO_DEV_HISI_SEC2
and CRYPTO_DEV_HISI_HPRE unconditionally, which may leads this:
drivers/crypto/hisilicon/qm.o: In function 'qm_alloc_uacce':
drivers/crypto/hisilicon/qm.c:1579: undefined reference to 'uacce_alloc'
Add Kconfig dependency to enforce usable configurations.
Fixes: 47c16b4499 ("crypto: hisilicon - qm depends on UACCE")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for uprobes on csky architecture.
Just like kprobe, it support single-step and simulate instructions.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch enable kprobes, kretprobes, ftrace interface. It utilized
software breakpoint and single step debug exceptions, instructions
simulation on csky.
We use USR_BKPT replace origin instruction, and the kprobe handler
prepares an excutable memory slot for out-of-line execution with a
copy of the original instruction being probed. Most of instructions
could be executed by single-step, but some instructions need origin
pc value to execute and we need software simulate these instructions.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach in
the platform-memory subsystem before the platform will consider them
power-fail protected.
- Fixup some flexible-array declarations.
- Promote numa_map_to_online_node() to a cross-kernel generic facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit test
compilation fixups.
zero_page_range() dax operation is mandatory for dax devices. Right now
that check happens in dax_zero_page_range() function. Dan thinks that's
too late and its better to do the check earlier in alloc_dax().
I also modified alloc_dax() to return pointer with error code in it in
case of failure. Right now it returns NULL and caller assumes failure
happened due to -ENOMEM. But with this ->zero_page_range() check, I
need to return -EINVAL instead.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20200401161125.GB9398@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a dax operation zero_page_range, to zero a page. This will also clear any
known poison in the page being zeroed.
As of now, zeroing of one page is allowed in a single call. There
are no callers which are trying to zero more than a page in a single call.
Once we grow the callers which zero more than a page in single call, we
can add that support. Primary reason for not doing that yet is that this
will add little complexity in dm implementation where a range might be
spanning multiple underlying targets and one will have to split the range
into multiple sub ranges and call zero_page_range() on individual targets.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: https://lore.kernel.org/r/20200228163456.1587-3-vgoyal@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Unlike normal memory ("memory" compatible type in the FDT), the
persistent memory ("ibm,pmemory" in the FDT) can be mapped anywhere in
the guest physical space and it can be used for DMA.
In order to maintain 1:1 mapping via the huge DMA window, we need to
know the maximum physical address at the time of the window setup. So
far we've been looking at "memory" nodes but "ibm,pmemory" does not
have fixed addresses and the persistent memory may be mapped
afterwards.
Since the persistent memory is still backed with page structs, use
MAX_PHYSMEM_BITS as the upper limit.
This effectively disables huge DMA window in LPAR under pHyp if
persistent memory is present but this is the best we can do for the
moment.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Wen Xiong<wenxiong@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200331012338.23773-1-aik@ozlabs.ru
sparc32 is the last platform making dynamic decisions in
get_arch_dma_ops based on the bus passed in. Instead set the
iommu dma_ops at iommu probing and propagate them in
of_propagate_archdata, falling back to the NULL ops for the
direct mapping in the Leon or PCI case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use list_for_each_entry_safe() instead of list_for_each_safe()
to simplify the code.
Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shifting the integer value 1 is evaluated using 32-bit
arithmetic and then used in an expression that expects a 64-bit
value, so there is potentially an integer overflow. Fix this
by using the BIT_ULL macro to perform the shift and avoid the
overflow.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 13f2e64b94 ("mlxsw: spectrum_trap: Add devlink-trap policer support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pegasus' own workqueue and replace it with system_long_wq.
Signed-off-by: Petko Manolov <petkan@nucleusys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we limited the retrans_time to be greater than HZ/2. i.e.
setting retrans_time less than 500ms will not work. This makes the user
unable to achieve a more accurate control for bonding arp fast failover.
Update the sanity check to HZ/100, which is 10ms, to let users have more
ability on the retrans_time control.
v3: sync the behavior with IPv6 and update all the timer handler
v2: use HZ instead of hard code number
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, SO_BINDTODEVICE requires CAP_NET_RAW. This change allows a
non-root user to bind a socket to an interface if it is not already
bound. This is useful to allow an application to bind itself to a
specific VRF for outgoing or incoming connections. Currently, an
application wanting to manage connections through several VRF need to
be privileged.
Previously, IP_UNICAST_IF and IPV6_UNICAST_IF were added for
Wine (76e21053b5 and c4062dfc42) specifically for use by
non-root processes. However, they are restricted to sendmsg() and not
usable with TCP. Allowing SO_BINDTODEVICE would allow TCP clients to
get the same privilege. As for TCP servers, outside the VRF use case,
SO_BINDTODEVICE would only further restrict connections a server could
accept.
When an application is restricted to a VRF (with `ip vrf exec`), the
socket is bound to an interface at creation and therefore, a
non-privileged call to SO_BINDTODEVICE to escape the VRF fails.
When an application bound a socket to SO_BINDTODEVICE and transmit it
to a non-privileged process through a Unix socket, a tentative to
change the bound device also fails.
Before:
>>> import socket
>>> s=socket.socket(socket.AF_INET, socket.SOCK_STREAM)
>>> s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, b"dummy0")
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
PermissionError: [Errno 1] Operation not permitted
After:
>>> import socket
>>> s=socket.socket(socket.AF_INET, socket.SOCK_STREAM)
>>> s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, b"dummy0")
>>> s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, b"dummy0")
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
PermissionError: [Errno 1] Operation not permitted
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull devicetree updates from Rob Herring:
- Unit test for overlays with GPIO hogs
- Improve dma-ranges parsing to handle dma-ranges with multiple entries
- Update dtc to upstream version v1.6.0-2-g87a656ae5ff9
- Improve overlay error reporting
- Device link support for power-domains and hwlocks bindings
- Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida,
PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and
ITE Tech
- Add deprecated Marvell vendor prefix 'mrvl'
- A bunch of binding conversions to DT schema continues. Of note, the
common serial and USB connector bindings are converted.
- Add more Arm CPU compatibles
- Drop Mark Rutland as DT maintainer :(
* tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits)
MAINTAINERS: drop an old reference to stm32 pwm timers doc
MAINTAINERS: dt: update etnaviv file reference
dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb
dt-bindings: uniphier-system-bus: fix warning in the example
dt-bindings: display: meson-vpu: fix indentation of reg-names' "items"
dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints
dt-bindings: power: Fix example for power-domain
dt-bindings: arm: Add some constraints for PSCI nodes
of: some unittest overlays not untracked
of: gpio unittest kfree() wrong object
dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml
dt-bindings: serial: sh-sci: Convert to json-schema
dt-bindings: serial: Document serialN aliases
dt-bindings: thermal: tsens: Set 'additionalProperties: false'
dt-bindings: thermal: tsens: Fix nvmem-cell-names schema
dt-bindings: vendor-prefixes: Add Beacon vendor prefix
dt-bindings: vendor-prefixes: Add Topwise
of: of_private.h: Replace zero-length array with flexible-array member
docs: dt: fix a broken reference to input.yaml
docs: dt: fix references to ap806-system-controller.txt
...
Pull SCSI updates from James Bottomley:
"This series has a huge amount of churn because it pulls in Mauro's doc
update changing all our txt files to rst ones.
Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
some other minor updates.
The major core change is Hannes moving functions out of the aacraid
driver and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
scsi: ufs: Do not rely on prefetched data
scsi: dc395x: remove dc395x_bios_param
scsi: libiscsi: Fix error count for active session
scsi: hpsa: correct race condition in offload enabled
scsi: message: fusion: Replace zero-length array with flexible-array member
scsi: qedi: Add PCI shutdown handler support
scsi: qedi: Add MFW error recovery process
scsi: ufs: Enable block layer runtime PM for well-known logical units
scsi: ufs-qcom: Override devfreq parameters
scsi: ufshcd: Let vendor override devfreq parameters
scsi: ufshcd: Update the set frequency to devfreq
scsi: ufs: Resume ufs host before accessing ufs device
scsi: ufs-mediatek: customize the delay for enabling host
scsi: ufs: make HCE polling more compact to improve initialization latency
scsi: ufs: allow custom delay prior to host enabling
scsi: ufs-mediatek: use common delay function
scsi: ufs: introduce common and flexible delay function
scsi: ufs: use an enum for host capabilities
scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
...
Pull MTD updates from Miquel Raynal:
"MTD core changes:
- Fix issue where write_cached_data() fails but write() still returns
success
- maps: sa1100-flash: Replace zero-length array with flexible-array
member
- phram: Fix a double free issue in error path
- Convert fallthrough comments into statements
- MAINTAINERS: Add the IRC channel to the MTD related subsystems
Raw NAND core changes:
- Add support for manufacturer specific suspend/resume operation
- Add support for manufacturer specific lock/unlock operation
- Replace zero-length array with flexible-array member
- Fix a typo ("manufecturer")
- Ensure nand_soft_waitrdy wait period is enough
Raw NAND controller driver changes:
- Brcmnand:
* Add support for flash-edu for dma transfers (+ bindings)
- Cadence:
* Reinit completion before executing a new command
* Change bad block marker size
* Fix the calculation of the avaialble OOB size
* Get meta data size from registers
- Qualcom:
* Use dma_request_chan() instead dma_request_slave_channel()
* Release resources on failure within qcom_nandc_alloc()
- Allwinner:
* Use dma_request_chan() instead dma_request_slave_channel()
- Marvell:
* Use dma_request_chan() instead dma_request_slave_channel()
* Release DMA channel on error
- Freescale:
* Use dma_request_chan() instead dma_request_slave_channel()
- Macronix:
* Add support for Macronix NAND randomizer (+ bindings)
- Ams-delta:
* Rename structures and functions to gpio_nand*
* Make the driver custom I/O ready
* Drop useless local variable
* Support custom driver initialisation
* Add module device tables
* Handle more GPIO pins as optional
* Make read pulses optional
* Don't hardcode read/write pulse widths
* Push inversion handling to gpiolib
* Enable OF partition info support
* Drop board specific partition info
* Use struct gpio_nand_platdata
* Write protect device during probe
- Ingenic:
* Use devm_platform_ioremap_resource()
* Add dependency on MIPS || COMPILE_TEST
- Denali:
* Deassert write protect pin
- ST:
* Use dma_request_chan() instead dma_request_slave_channel()
Raw NAND chip driver changes:
- Toshiba:
* Support reading the number of bitflips for BENAND (Built-in ECC NAND)
- Macronix:
* Add support for deep power down mode
* Add support for block protection
SPI-NAND core changes:
- Do not erase the block before writing a bad block marker
- Explicitly use MTD_OPS_RAW to write the bad block marker to OOB
- Stop using spinand->oobbuf for buffering bad block markers
- Rework detect procedure for different READ_ID operation
SPI-NAND driver changes:
- Toshiba:
* Support for new Kioxia Serial NAND
* Rename function name to change suffix and prefix (8Gbit)
* Add comment about Kioxia ID
- Micron:
* Add new Micron SPI NAND devices with multiple dies
* Add M70A series Micron SPI NAND devices
* identify SPI NAND device with Continuous Read mode
* Add new Micron SPI NAND devices
* Describe the SPI NAND device MT29F2G01ABAGD
* Generalize the OOB layout structure and function names
SPI NOR core changes:
- Move all the manufacturer specific quirks/code out of the core, to
make the core logic more readable and thus ease maintenance.
- Move the SFDP logic out of the core, it provides a better
separation between the SFDP parsing and core logic.
- Trim what is exposed in spi-nor.h. The SPI NOR controllers drivers
must not be able to use structures that are meant just for the SPI
NOR core.
- Use the spi-mem direct mapping API to let advanced controllers
optimize the read/write operations when they support direct
mapping.
- Add generic formula for the Status Register block protection
handling. It fixes some long standing locking limitations and eases
the addition of the 4bit block protection support.
- Add block protection support for flashes with 4 block protection
bits in the Status Register.
SPI NOR controller drivers changes:
- The mtk-quadspi driver is replaced by the new spi-mem spi-mtk-nor
driver.
- Merge tag 'mtk-mtd-spi-move' into spi-nor/next to avoid conflicts.
HyperBus changes:
- Print error msg when compatible is wrong or missing
- Move mapping of direct access window from core to individual
drivers"
* tag 'mtd/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (103 commits)
mtd: Convert fallthrough comments into statements
mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND)
MAINTAINERS: Add the IRC channel to the MTD related subsystems
mtd: Fix issue where write_cached_data() fails but write() still returns success
mtd: maps: sa1100-flash: Replace zero-length array with flexible-array member
mtd: phram: fix a double free issue in error path
mtd: spinand: toshiba: Support for new Kioxia Serial NAND
mtd: spinand: toshiba: Rename function name to change suffix and prefix (8Gbit)
mtd: rawnand: macronix: Add support for deep power down mode
mtd: rawnand: Add support for manufacturer specific suspend/resume operation
mtd: spi-nor: Enable locking for n25q512ax3/n25q512a
mtd: spi-nor: Add SR 4bit block protection support
mtd: spi-nor: Add generic formula for SR block protection handling
mtd: spi-nor: Set all BP bits to one when lock_len == mtd->size
mtd: spi-nor: controllers: aspeed-smc: Replace zero-length array with flexible-array member
mtd: spi-nor: Clear WEL bit when erase or program errors occur
MAINTAINERS: update entry after SPI NOR controller move
mtd: spi-nor: Trim what is exposed in spi-nor.h
mtd: spi-nor: Drop the MFR definitions
mtd: spi-nor: Get rid of the now empty spi_nor_ids[] table
...
Pull dmaengine updates from Vinod Koul:
"Core:
- Some code cleanup and optimization in core by Andy
- Debugfs support for displaying dmaengine channels by Peter
Drivers:
- New driver for uniphier-xdmac controller
- Updates to stm32 dma, mdma and dmamux drivers and PM support
- More updates to idxd drivers
- Bunch of changes in tegra-apb driver and cleaning up of pm
functions
- Bunch of spelling fixes and Replace zero-length array patches
- Shutdown hook for fsl-dpaa2-qdma driver
- Support for interleaved transfers for ti-edma and virtualization
support for k3-dma driver
- Support for reset and updates in xilinx_dma driver
- Improvements and locking updates in at_hdma driver"
* tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits)
dt-bindings: dma: renesas,usb-dmac: add r8a77961 support
dmaengine: uniphier-xdmac: Remove redandant error log for platform_get_irq
dmaengine: tegra-apb: Improve DMA synchronization
dmaengine: tegra-apb: Don't save/restore IRQ flags in interrupt handler
dmaengine: tegra-apb: mark PM functions as __maybe_unused
dmaengine: fix spelling mistake "exceds" -> "exceeds"
dmaengine: sprd: Set request pending flag when DMA controller is active
dmaengine: ppc4xx: Use scnprintf() for avoiding potential buffer overflow
dmaengine: idxd: remove global token limit check
dmaengine: idxd: reflect shadow copy of traffic class programming
dmaengine: idxd: Merge definition of dsa_batch_desc into dsa_hw_desc
dmaengine: Create debug directories for DMA devices
dmaengine: ti: k3-udma: Implement custom dbg_summary_show for debugfs
dmaengine: Add basic debugfs support
dmaengine: fsl-dpaa2-qdma: remove set but not used variable 'dpaa2_qdma'
dmaengine: ti: edma: fix null dereference because of a typo in pointer name
dmaengine: fsl-dpaa2-qdma: Adding shutdown hook
dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver
dt-bindings: dmaengine: Add UniPhier external DMA controller bindings
dmaengine: ti: k3-udma: Implement support for atype (for virtualization)
...
Pull i2c updates from Wolfram Sang:
"I2C has:
- using defines for bus speeds to avoid mistakes in hardcoded values;
lots of small driver updates because of that. Thanks, Andy!
- API change: i2c_setup_smbus_alert() was renamed to
i2c_new_smbus_alert_device() and returns ERRPTR now. All in-tree
users have been converted
- in the core, a rare race condition when deleting the cdev has been
fixed. Thanks, Kevin!
- lots of driver updates. Thanks, everyone!
I also want to mention: The amount of review and testing tags given
was quite high this time. Thank you to these people, too. I hope we
can keep it like this!"
* 'i2c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
i2c: rcar: clean up after refactoring i2c_timings
macintosh: convert to i2c_new_scanned_device
i2c: drivers: Use generic definitions for bus frequencies
i2c: algo: Use generic definitions for bus frequencies
i2c: stm32f7: switch to I²C generic property parsing
i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()
i2c: core: Allow override timing properties with 0
i2c: core: Provide generic definitions for bus frequencies
i2c: mxs: Use dma_request_chan() instead dma_request_slave_channel()
i2c: imx: remove duplicate print after platform_get_irq()
i2c: designware: Fix spelling typos in the comments
i2c: designware: Discard i2c_dw_read_comp_param() function
i2c: designware: Detect the FIFO size in the common code
i2c: dev: Fix the race between the release of i2c_dev and cdev
i2c: qcom-geni: Drop of_platform.h include
i2c: qcom-geni: Grow a dev pointer to simplify code
i2c: qcom-geni: Let firmware specify irq trigger flags
i2c: stm32f7: do not backup read-only PECR register
i2c: smbus: remove outdated references to irq level triggers
i2c: convert SMBus alert setup function to return an ERRPTR
...
Setting nfs_mountpoint_expiry_timeout() to a negative value stops
mountpoint expiration, while setting it to a positive value restarts
the scheduler.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We must not return from nfs_d_automount() without holding 2 references
to the mount record. Doing so, will trigger the BUG() in finish_automount().
Also ensure that we don't try to reschedule the automount timer with
a negative or zero timeout value.
Fixes: 22a1ae9a93 ("NFS: If nfs_mountpoint_expiry_timeout < 0, do not expire submounts")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Pull sound updates from Takashi Iwai:
"This became again a busy development cycle. There are few ALSA core
updates (merely API cleanups and sparse fixes), with the majority of
other changes are found in ASoC scene.
Here are some highlights:
ALSA core:
- More helper macros for sparse warning fixes (e.g. bitwise types)
- Slight optimization of PCM OSS locks
- Make common handling for PCM / compress buffers (for SOF)
ASoC:
- Lots of code refactoring and modernization for (still ongoing)
componentization works
- Conversion of SND_SOC_ALL_CODECS to use imply
- Continued refactoring and fixing of the Intel SOF/SST support,
including the initial (but still incomplete) SoundWire support
- SoundWire and more advanced clocking support for Realtek RT5682
- Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563
and TLV320ADCX140
HD-audio:
- Optimizations in HDMI jack handling
- A few new quirks and fixups for Realtek codecs
USB-audio:
- Delayed registration support
- New quirks for Motu, Kingston, Presonus"
* tag 'sound-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor
Revert "ALSA: uapi: Drop asound.h inclusion from asoc.h"
ALSA: hda/realtek - Remove now-unnecessary XPS 13 headphone noise fixups
ALSA: hda/realtek - Set principled PC Beep configuration for ALC256
ALSA: doc: Document PC Beep Hidden Register on Realtek ALC256
ALSA: hda/realtek - a fake key event is triggered by running shutup
ALSA: hda: default enable CA0132 DSP support
ASoC: amd: acp3x-pcm-dma: clean up two indentation issues
ASoC: tlv320adcx140: Remove undocumented property
ASoC: Intel: sof_sdw: Add Volteer support with RT5682 SNDW helper function
ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver
ASoC: Intel: boards: add sof_sdw machine driver
ASoC: Intel: soc-acpi: update topology and driver name for SoundWire platforms
ASoC: rt5682: move DAI clock registry to I2S mode
ASoC: pxa: magician: convert to use i2c_new_client_device()
ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing capabilities
Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread
ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire
ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop quirks
ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt handlers
...
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.7 kernel cycle.
There are no core changes this time, only driver developments:
- New driver for the Dialog Semiconductor DA9062 Power Management
Integrated Circuit (PMIC).
- Renesas SH-PFC has improved consistency, with group and register
checks in the configuration checker.
- New subdriver for the Qualcomm IPQ6018.
- Add the RGMII pin control functionality to Qualcomm IPQ8064.
- Performance and code quality cleanups in the Mediatek driver.
- Improve the Broadcom BCM2835 support to cover all the GPIOs that
exist in it.
- The Allwinner/Sunxi driver properly masks non-wakeup IRQs on
suspend.
- Add some missing groups and functions to the Ingenic driver.
- Convert some of the Freescale device tree bindings to use the new
and all improved JSON YAML markup.
- Refactorings and support for the SFIO/GPIO in the Tegra194 SoC
driver.
- Support high impedance mode in the Spreadtrum/Unisoc driver"
* tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (64 commits)
pinctrl: qcom: fix compilation error
pinctrl: qcom: use scm_call to route GPIO irq to Apps
pinctrl: sprd: Add pin high impedance mode support
pinctrl: sprd: Use the correct pin output configuration
pinctrl: tegra: Add SFIO/GPIO programming on Tegra194
pinctrl: tegra: Renumber the GG.0 and GG.1 pins
pinctrl: tegra: Do not add default pin range on Tegra194
pinctrl: tegra: Pass struct tegra_pmx for pin range check
pinctrl: tegra: Fix "Scmitt" -> "Schmitt" typo
pinctrl: tegra: Fix whitespace issues for improved readability
pinctrl: mediatek: Use scnprintf() for avoiding potential buffer overflow
pinctrl: freescale: drop the dependency on ARM64 for i.MX8M
Revert "pinctrl: mvebu: armada-37xx: use use platform api"
dt-bindings: pinctrl: at91: Fix a typo ("descibe")
pinctrl: meson: add tsin pinctrl for meson gxbb/gxl/gxm
pinctrl: sprd: Fix the kconfig warning
pinctrl: ingenic: add hdmi-ddc pin control group
pinctrl: sirf/atlas7: Replace zero-length array with flexible-array member
pinctrl: sprd: Allow the SPRD pinctrl driver building into a module
pinctrl: Export some needed symbols at module load time
...
Pull hwspinlock updates from Bjorn Andersson:
"This marks all hwspinlock driver COMPILE_TESTable and replaces the
zero-length array in hwspinlock_device with a flexible-array member"
* tag 'hwlock-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
hwspinlock: hwspinlock_internal.h: Replace zero-length array with flexible-array member
hwspinlock: Allow drivers to be built with COMPILE_TEST
Pull remoteproc updates from Bjorn Andersson:
- a range of improvements to the OMAP remoeteproc driver; among other
things adding devicetree, suspend/resume and watchdog support, and
adds support the remoteprocs in the DRA7xx SoC
- support for 64-bit firmware, extends the ELF loader to support this
and fixes for a number of race conditions in the recovery handling
- a generic mechanism to allow remoteproc drivers to sync state with
remote processors during a panic, and uses this to prepare Qualcomm
remote processors for post mortem analysis
- fixes to cleanly recover from crashes in the modem firmware on
production Qualcomm devices
* tag 'rproc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (37 commits)
remoteproc/omap: Switch to SPDX license identifiers
remoteproc/omap: Add watchdog functionality for remote processors
remoteproc/omap: Report device exceptions and trigger recovery
remoteproc/omap: Add support for runtime auto-suspend/resume
remoteproc/omap: Add support for system suspend/resume
remoteproc/omap: Request a timer(s) for remoteproc usage
remoteproc/omap: Check for undefined mailbox messages
remoteproc/omap: Remove the platform_data header
remoteproc/omap: Add support for DRA7xx remote processors
remoteproc/omap: Initialize and assign reserved memory node
remoteproc/omap: Add the rproc ops .da_to_va() implementation
remoteproc/omap: Add support to parse internal memories from DT
remoteproc/omap: Add a sanity check for DSP boot address alignment
remoteproc/omap: Add device tree support
dt-bindings: remoteproc: Add OMAP remoteproc bindings
remoteproc: qcom: Introduce panic handler for PAS and ADSP
remoteproc: qcom: q6v5: Add common panic handler
remoteproc: Introduce "panic" callback in ops
remoteproc: Traverse rproc_list under RCU read lock
remoteproc: Fix NULL pointer dereference in rproc_virtio_notify
...
nfs_vers_tokens, nfs_xprt_protocol_tokens, and nfs_secflavor_tokens were
all missing an empty item at the end of the array, allowing
lookup_constant() to potentially walk off the end and trigger and oops.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Fixes: e38bb238ed ("NFS: Convert mount option parsing to use functionality from fs_parser.h")
Cc: stable@vger.kernel.org # v5.6
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Pull percpu updates from Dennis Zhou:
"This is just a few documentation fixes for percpu refcount and bitmap
helpers that went in v5.6, and moving my emails to all be at korg"
* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: update copyright emails to dennis@kernel.org
include/bitmap.h: add new functions to documentation
include/bitmap.h: add missing parameter in docs
percpu_ref: Fix comment regarding percpu_ref_init flags
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
Pull x86 fix from Ingo Molnar:
"A single fix addressing Sparse warnings. <asm/bitops.h> is changed
non-trivially to avoid the warnings, but generated code is not
supposed to be affected"
* tag 'x86-urgent-2020-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix bitops.h warning with a moved cast
Pull integrity updates from Mimi Zohar:
"Just a couple of updates for linux-5.7:
- A new Kconfig option to enable IMA architecture specific runtime
policy rules needed for secure and/or trusted boot, as requested.
- Some message cleanup (eg. pr_fmt, additional error messages)"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: add a new CONFIG for loading arch-specific policies
integrity: Remove duplicate pr_fmt definitions
IMA: Add log statements for failure conditions
IMA: Update KBUILD_MODNAME for IMA files to ima
Merge updates from Andrew Morton:
"A large amount of MM, plenty more to come.
Subsystems affected by this patch series:
- tools
- kthread
- kbuild
- scripts
- ocfs2
- vfs
- mm: slub, kmemleak, pagecache, gup, swap, memcg, pagemap, mremap,
sparsemem, kasan, pagealloc, vmscan, compaction, mempolicy,
hugetlbfs, hugetlb"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits)
include/linux/huge_mm.h: check PageTail in hpage_nr_pages even when !THP
mm/hugetlb: fix build failure with HUGETLB_PAGE but not HUGEBTLBFS
selftests/vm: fix map_hugetlb length used for testing read and write
mm/hugetlb: remove unnecessary memory fetch in PageHeadHuge()
mm/hugetlb.c: clean code by removing unnecessary initialization
hugetlb_cgroup: add hugetlb_cgroup reservation docs
hugetlb_cgroup: add hugetlb_cgroup reservation tests
hugetlb: support file_region coalescing again
hugetlb_cgroup: support noreserve mappings
hugetlb_cgroup: add accounting for shared mappings
hugetlb: disable region_add file_region coalescing
hugetlb_cgroup: add reservation accounting for private mappings
mm/hugetlb_cgroup: fix hugetlb_cgroup migration
hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations
hugetlb_cgroup: add hugetlb_cgroup reservation counter
hugetlbfs: Use i_mmap_rwsem to address page fault/truncate race
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
mm/memblock.c: remove redundant assignment to variable max_addr
mm: mempolicy: require at least one nodeid for MPOL_PREFERRED
mm: mempolicy: use VM_BUG_ON_VMA in queue_pages_test_walk()
...
Pull xfs updates from Darrick Wong:
"There's a lot going on this cycle with cleanups in the log code, the
btree code, and the xattr code.
We're tightening of metadata validation and online fsck checking, and
introducing a common btree rebuilding library so that we can refactor
xfs_repair and introduce online repair in a future cycle.
We also fixed a few visible bugs -- most notably there's one in
getdents that we introduced in 5.6; and a fix for hangs when disabling
quotas.
This series has been running fstests & other QA in the background for
over a week and looks good so far.
I anticipate sending a second pull request next week. That batch will
change how xfs interacts with memory reclaim; how the log batches and
throttles log items; how hard writes near ENOSPC will try to squeeze
more space out of the filesystem; and hopefully fix the last of the
umount hangs after a catastrophic failure. That should ease a lot of
problems when running at the limits, but for now I'm leaving that in
for-next for another week to make sure we got all the subtleties
right.
Summary:
- Fix a hard to trigger race between iclog error checking and log
shutdown.
- Strengthen the AGF verifier.
- Ratelimit some of the more spammy error messages.
- Remove the icdinode uid/gid members and just use the ones in the
vfs inode.
- Hold ILOCK across insert/collapse range.
- Clean up the extended attribute interfaces.
- Clean up the attr flags mess.
- Restore PF_MEMALLOC after exiting xfsaild thread to avoid
triggering warnings in the process accounting code.
- Remove the flexibly-sized array from struct xfs_agfl to eliminate
compiler warnings about unaligned pointers and packed structures.
- Various macro and typedef removals.
- Stale metadata buffers if we decide they're corrupt outside of a
verifier.
- Check directory data/block/free block owners.
- Fix a UAF when aborting inactivation of a corrupt xattr fork.
- Teach online scrub to report failed directory and attr name lookups
as a metadata corruption instead of a runtime error.
- Avoid potential buffer overflows in sysfs files by using scnprintf.
- Fix a regression in getdents lookups due to a mistake in pointer
arithmetic.
- Refactor btree cursor private data structures to use anonymous
unions.
- Cleanups in the log unmounting code.
- Fix a potential mishandling of ENOMEM errors on multi-block
directory buffer lookups.
- Fix an incorrect test in the block allocation code.
- Cleanups and name prefix shortening in the scrub code.
- Introduce btree bulk loading code for online repair and scrub.
- Fix a quotaoff log item leak (and hang) when the fs goes down
midway through a quotaoff operation.
- Remove di_version from the incore inode.
- Refactor some of the log shutdown checking code.
- Record the forcing of the log unmount records in the log force
counters.
- Fix a longstanding bug where quotacheck would purge the
administrator's default quota grace interval and warning limits.
- Reduce memory usage when scrubbing directory and xattr trees.
- Don't let fsfreeze race with GETFSMAP or online scrub.
- Handle bio_add_page failures more gracefully in xlog_write_iclog"
* tag 'xfs-5.7-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (108 commits)
xfs: prohibit fs freezing when using empty transactions
xfs: shutdown on failure to add page to log bio
xfs: directory bestfree check should release buffers
xfs: drop all altpath buffers at the end of the sibling check
xfs: preserve default grace interval during quotacheck
xfs: remove xlog_state_want_sync
xfs: move the ioerror check out of xlog_state_clean_iclog
xfs: refactor xlog_state_clean_iclog
xfs: remove the aborted parameter to xlog_state_done_syncing
xfs: simplify log shutdown checking in xfs_log_release_iclog
xfs: simplify the xfs_log_release_iclog calling convention
xfs: factor out a xlog_wait_on_iclog helper
xfs: merge xlog_cil_push into xlog_cil_push_work
xfs: remove the di_version field from struct icdinode
xfs: simplify a check in xfs_ioctl_setattr_check_cowextsize
xfs: simplify di_flags2 inheritance in xfs_ialloc
xfs: only check the superblock version for dinode size calculation
xfs: add a new xfs_sb_version_has_v3inode helper
xfs: fix unmount hang and memory leak on shutdown during quotaoff
xfs: factor out quotaoff intent AIL removal and memory free
...
Pull hibernation fix from Darrick Wong:
"Fix a regression where we broke the userspace hibernation driver by
disallowing writes to the swap device"
* tag 'vfs-5.7-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
hibernate: Allow uswsusp to write to swap
Pull iomap updates from Darrick Wong:
"We're fixing tracepoints and comments in this cycle, so there
shouldn't be any surprises here.
I anticipate sending a second pull request next week with a single bug
fix for readahead, but it's still undergoing QA.
Summary:
- Fix a broken tracepoint
- Fix a broken comment"
* tag 'iomap-5.7-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: fix comments in iomap_dio_rw
iomap: Remove pgoff from tracepoints
Pull vfs pathwalk sanitizing from Al Viro:
"Massive pathwalk rewrite and cleanups.
Several iterations have been posted; hopefully this thing is getting
readable and understandable now. Pretty much all parts of pathname
resolutions are affected...
The branch is identical to what has sat in -next, except for commit
message in "lift all calls of step_into() out of follow_dotdot/
follow_dotdot_rcu", crediting Qian Cai for reporting the bug; only
commit message changed there."
* 'work.dotdot1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (69 commits)
lookup_open(): don't bother with fallbacks to lookup+create
atomic_open(): no need to pass struct open_flags anymore
open_last_lookups(): move complete_walk() into do_open()
open_last_lookups(): lift O_EXCL|O_CREAT handling into do_open()
open_last_lookups(): don't abuse complete_walk() when all we want is unlazy
open_last_lookups(): consolidate fsnotify_create() calls
take post-lookup part of do_last() out of loop
link_path_walk(): sample parent's i_uid and i_mode for the last component
__nd_alloc_stack(): make it return bool
reserve_stack(): switch to __nd_alloc_stack()
pick_link(): take reserving space on stack into a new helper
pick_link(): more straightforward handling of allocation failures
fold path_to_nameidata() into its only remaining caller
pick_link(): pass it struct path already with normal refcounting rules
fs/namei.c: kill follow_mount()
non-RCU analogue of the previous commit
helper for mount rootwards traversal
follow_dotdot(): be lazy about changing nd->path
follow_dotdot_rcu(): be lazy about changing nd->path
follow_dotdot{,_rcu}(): massage loops
...
- Apply Qualcomm class fixup only to PCIe host bridges, not to all
PCI_VENDOR_ID_QCOM devices (Bjorn Andersson)
* remotes/lorenzo/pci/qcom:
PCI: qcom: Fix the fixup of PCI_VENDOR_ID_QCOM
