Pull ARM DT and driver fixes from Arnd Bergmann:
"For the devicetree files, there are a total of 20 patches, almost
entirely for 32-bit machines:
- The Allwinner/sun9i r40 SoC dtsi file contains a number of issues,
both for correctness and for style that are addressed in separate
patches. This causes most of the changed lines of the DT updates
this time.
- More Allwinner updates fixing the identification of the security
system on sun8i/A33, a recent regression of the A83t ethernet, and
a few board specific issues on the TBS-A711 macine.
- Several bug fixes for OMAP dts files, most notably fixing the
timings for the NAND flash on the Nokia N900 that regressed a while
ago after the move to configuring them from DT. Some other OMAPs
now set the correct dma limits on the L3 bus, and a regression fix
addresses lost Ethernet on dm814x
- One incorrect setting in the newly added Raspberry Pi Zero W that
may cause issues with the SD card controller.
- A missing property on the bcm2835 firmware node caused incorrect
DMA settings.
- An old bug on the oxnas platform causing spurious interrupts is
finally addressed.
- A regression on the Exynos Midas board broke the OLED panel power
supply.
- The i.MX6 phycore SoM specified the wrong voltage for the SoC, this
is now set to the values from the datasheet.
- Some 64-bit machines use a deprecated string to identify the PSCI
firmware.
There are also several small code fixes addressing mostly serious
issues:
- Fix the sunxi rsb bus access to no longer return incorrect data
when mixing 8 and 16 bit I/O.
- Fix a suspend/resume regression on the OMAP2+ lcdc from a missing
quirk in the ti-sysc driver
- Fix a NULL pointer access from a race in the fsl dpio driver
- Fix a v5.5 regression in the exynos-chipid driver that caused an
invalid error code probing the device on non-exynos platforms
- Fix an out-of-bounds access in the AMD TEE driver"
* tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
soc: samsung: chipid: Fix return value on non-Exynos platforms
arm64: dts: Fix leftover entry-methods for PSCI
ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards
ARM: dts: oxnas: Fix clear-mask property
ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations
ARM: dts: omap5: Add bus_dma_limit for L3 bus
ARM: dts: omap4-droid4: Fix lost touchscreen interrupts
ARM: dts: dra7: Add bus_dma_limit for L3 bus
ARM: bcm2835-rpi-zero-w: Add missing pinctrl name
ARM: dts: sun8i: a33: add the new SS compatible
dt-bindings: crypto: add new compatible for A33 SS
ARM: dts: sun8i: r40: Move SPI device nodes based on address order
ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3
ARM: dts: sun8i: r40: Move AHCI device node based on address order
ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage
soc: fsl: dpio: register dpio irq handlers after dpio create
tee: amdtee: out of bounds read in find_session()
ARM: dts: N900: fix onenand timings
bus: ti-sysc: Fix quirk flags for lcdc on am335x
ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode
...
A new file was added to the tracing directory that will allow a user to
place a PID into it and the task associated to that PID will not have its
events traced. If the event-fork option is enabled, then neither will the
children of that task have its events traced.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A new file was added to the tracing directory that will allow a user to
place a PID into it and the task associated to that PID will not be traced
by the function tracer. If the function-fork option is enabled, then neither
will the children of that task be traced by the function tracer.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's currently a way to select a task that should only have its events
traced, but there's no way to select a task not to have itsevents traced.
Add a set_event_notrace_pid file that acts the same as set_event_pid (and is
also affected by event-fork), but the task pids in this file will not be
traced even if they are listed in the set_event_pid file. This makes it easy
for tools like trace-cmd to "hide" itself from beint traced by events when
it is recording other tasks.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's currently a way to select a task that should only be traced by
functions, but there's no way to select a task not to be traced by the
function tracer. Add a set_ftrace_notrace_pid file that acts the same as
set_ftrace_pid (and is also affected by function-fork), but the task pids in
this file will not be traced even if they are listed in the set_ftrace_pid
file. This makes it easy for tools like trace-cmd to "hide" itself from the
function tracer when it is recording other tasks.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The set_ftrace_pid file is used to filter function tracing to only trace
tasks that are listed in that file. Instead of testing the pids listed in
that file (it's a bitmask) at each function trace event, the logic is done
via a sched_switch hook. A flag is set when the next task to run is in the
list of pids in the set_ftrace_pid file. But the sched_switch hook is not at
the exact location of when the task switches, and the flag gets set before
the task to be traced actually runs. This leaves a residue of traced
functions that do not belong to the pid that should be filtered on.
By changing the logic slightly, where instead of having a boolean flag to
test, record the pid that should be traced, with special values for not to
trace and always trace. Then at each function call, a check will be made to
see if the function should be ignored, or if the current pid matches the
function that should be traced, and only trace if it matches (or if it has
the special value to always trace).
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Have the ring_buffer_iterator set a flag if events were dropped as it were
to go and peek at the next event. Have the trace file display this fact if
it happened with a "LOST EVENTS" message.
Link: http://lkml.kernel.org/r/20200317213417.045858900@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When opening the "trace" file, it is no longer necessary to disable tracing.
Note, a new option is created called "pause-on-trace", when set, will cause
the trace file to emulate its original behavior.
Link: http://lkml.kernel.org/r/20200317213416.903351225@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Move from requesting only full file layout segments, to requesting
layout segments that match our I/O size. This means the server is
still free to return a full file layout, but we will no longer
error out if it does not.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When starting to read or write with a layout segment, check that the
range matches our request.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Check that the number of mirrors, and the mirror information matches
before deciding to merge layout segments in pNFS/flexfiles.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fix up pnfs_layout_mark_request_commit() to alway reschedule the write
if the layout segment is invalid. Also minor cleanup.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Move the pNFS commit related operations into a separate structure
that can be carried by the pnfs_ds_commit_info.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Lift filelayout_search_commit_reqs() into the generic pnfs/nfs code,
and add support for commit arrays.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Enable adding and lookup of per-layout segment commits in filelayout
and flexfilelayout.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that both the file and flexfiles layout types clean up when
freeing the layout segments.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add support for scanning the full list of per-layout segment commit
arrays to nfs_clear_pnfs_ds_commit_verifiers().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Instead of trying to save the commit verifiers and checking them against
previous writes, adopt the same strategy as for buffered writes, of
just checking the verifiers at commit time.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add a pNFS callback to allow the O_DIRECT code to release the DS
commitinfo when freeing the dreq.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add support for scanning the full list of per-layout segment commit
arrays to pnfs_generic_commit_pagelist().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add support for scanning the full list of per-layout segment commit
arrays to pnfs_generic_recover_commit_reqs().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add support for scanning the full list of per-layout segment commit
arrays to pnfs_generic_scan_commit_lists()
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When we have multiple layout segments with different lists of mirrored
data, we need to track the commits on a per layout segment basis.
This patch adds a list to support this tracking in struct
pnfs_ds_commit_info.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When the ring buffer becomes writable for even when the trace file is read,
it must still not be resized. But since tracers can be activated while the
trace file is being read, the irqsoff tracer can modify the per CPU buffers,
and this can cause the reader of the trace file to update the wrong buffer's
resize disable bit, as the irqsoff tracer swaps out cpu buffers.
By making the resize disable per cpu_buffer, it makes the update follow the
per cpu_buffer even if it's swapped out with the snapshot buffer and keeps
the release of the trace file modifying the same data as the open did.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With the help of previously added tracepoints we can now trace
report-zones, zone-write and zone-mgmt ops in null_blk_zoned.c.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds two new tracpoints for null_blk_zoned.c that allows us
to trace report-zones, zone-mgmt-op and zone-write operations which has
direct effect on the zone condition state machine.
Also, we update drivers/block/Makefile so that new null_blk related
tracefiles can be compiled.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to stringify the zone conditions. We use this helper in the
next patch to track zone conditions in tracepoints.
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Function gfs2_recover_func grabs the sd_log_flush_lock rw_semaphore in
write mode. This is unnecessary because we only need to prevent log flush
from using sd_log_bio bio while it does. Therefore, a read lock will be
enough. This is a small step in cleaning up log flush.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, if the ail1 flush got stuck for some reason, there
were no clues as to why. This patch introduces a check for getting
stuck for more than a minute, and if it happens, it dumps the items
still remaining on the ail1 list.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In function try_rgrp_unlink, we added a temporary lock of the
sd_log_flush_lock while searching the bitmaps. This protected us from
problems in which dinodes being freed were still in a state of flux
because the rgrp was in an active transaction. It was a kludge.
Now that we've straightened out the code for inode eviction, deletes,
and all the recovery mess, we no longer need this kludge.
This patch removes it, and should improve performance.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
We now get the quota data structure when opening a file writable and put it
when closing that writable file descriptor, so there no longer is a need for
gfs2_qa_{get,put} while we're holding a writable file descriptor.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Keeping reservations and quotas separate helps reviewing the code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, multiple users called gfs2_qa_alloc which allocated
a qadata structure to the inode, if quotas are turned on. Later, in
file close or evict, the structure was deleted with gfs2_qa_delete.
But there can be several competing processes who need access to the
structure. There were races between file close (release) and the others.
Thus, a release could delete the structure out from under a process
that relied upon its existence. For example, chown.
This patch changes the management of the qadata structures to be
a get/put scheme. Function gfs2_qa_alloc has been changed to gfs2_qa_get
and if the structure is allocated, the count essentially starts out at
1. Function gfs2_qa_delete has been renamed to gfs2_qa_put, and the
last guy to decrement the count to 0 frees the memory.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, multiple callers called gfs2_rsqa_alloc to force
the existence of a reservations structure and a quota data structure
if needed. However, now the reservations are handled separately, so
the quota data is only the quota data. So we eliminate the one in
favor of just calling gfs2_qa_alloc directly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Replace open-coded versions of list_first_entry and list_last_entry with those
functions.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When allocating a new inode, mark the iopen glock holder as uninitialized to
make sure gfs2_evict_inode won't fail after an incomplete create or lookup. In
gfs2_evict_inode, allow the inode glock to be NULL and remove the duplicate
iopen glock teardown code. In gfs2_inode_lookup, don't tear down things that
gfs2_evict_inode will already tear down.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
dm_clone_nr_of_hydrated_regions() returns the number of regions that
have been hydrated so far. In order to do so it employs bitmap_weight().
Until now, the return type of dm_clone_nr_of_hydrated_regions() was
unsigned long.
Because bitmap_weight() returns an int, in case BITS_PER_LONG == 64 and
the return value of bitmap_weight() is 2^31 (the maximum allowed number
of regions for a device), the result is sign extended from 32 bits to 64
bits and an incorrect value is displayed, in the status output of
dm-clone, as the number of hydrated regions.
Fix this by having dm_clone_nr_of_hydrated_regions() return an unsigned
int.
Fixes: 7431b7835f ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
