Completion errors after a disconnect often occur much sooner than a
CM_DISCONNECT event. Use this to try to detect connection loss more
quickly.
Note that other kernel ULPs do take care to disconnect explicitly
when a WR is flushed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up:
The upper layer serializes calls to xprt_rdma_close, so there is no
need for an atomic bit operation, saving 8 bytes in rpcrdma_ia.
This enables merging rpcrdma_ia_remove directly into the disconnect
logic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Move rdma_cm_id creation into rpcrdma_ep_create() so that it is now
responsible for allocating all per-connection hardware resources.
With this clean-up, all three arms of the switch statement in
rpcrdma_ep_connect are exactly the same now, thus the switch can be
removed.
Because device removal behaves a little differently than
disconnection, there is a little more work to be done before
rpcrdma_ep_destroy() can release the connection's rdma_cm_id. So
it is not quite symmetrical with rpcrdma_ep_create() yet.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Make a Protection Domain (PD) a per-connection resource rather than
a per-transport resource. In other words, when the connection
terminates, the PD is destroyed.
Thus there is one less HW resource that remains allocated to a
transport after a connection is closed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Simplify the synopses of functions in the connect and
disconnect paths in preparation for combining the rpcrdma_ia and
struct rpcrdma_ep structures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Simplify the synopses of functions in the post_send path
by combining the struct rpcrdma_ia and struct rpcrdma_ep arguments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: prepare for combining the rpcrdma_ia and rpcrdma_ep
structures. Take the opportunity to rename the function to be
consistent with the "subsystem _ object _ verb" naming scheme.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor rpcrdma_ep_create(), rpcrdma_ep_disconnect(), and
rpcrdma_ep_destroy().
rpcrdma_ep_create will be invoked at connect time instead of at
transport set-up time. It will be responsible for allocating per-
connection resources. In this patch it allocates the CQs and
creates a QP. More to come.
rpcrdma_ep_destroy() is the inverse functionality that is
invoked at disconnect time. It will be responsible for releasing
the CQs and QP.
These changes should be safe to do because both connect and
disconnect is guaranteed to be serialized by the transport send
lock.
This takes us another step closer to resolving the address and route
only at connect time so that connection failover to another device
will work correctly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Two changes:
- Show the number of SG entries that were mapped. This helps debug
DMA-related problems.
- Record the MR's resource ID instead of its memory address. This
groups each MR with its associated rdma-tool output, and reduces
needless exposure of memory addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 7f9803072f ("serial: 8250: Support console on software emulated
rs485 ports") amended serial8250_console_write() with rs485 support, but
positioned the invocation of ->rs485_stop_tx() after re-enablement of
interrupts. The irq handler and ->console_write() are serialized with
the port spinlock, so no problem there, but due to the rs485 delay, the
irq handler may unnecessarily spin for a while. Avoid that by moving
->rs485_stop_tx() before re-enablement of interrupts, which also mirrors
the order at the beginning of serial8250_console_write().
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/019839cb1f61b01210b6ff9ac9f9079ca77f8411.1585319447.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now, snd_soc_pcm_runtime supports multi cpu_dai/codec_dai.
It still has cpu_dai/codec_dai for single DAI,
and has cpu_dais/codec_dais for multi DAIs.
dais = [][][][][][][][][][][][][][][][][][]
^cpu_dais ^codec_dais
|--- num_cpus ---|--- num_codecs --|
/* for multi DAIs */
rtd->cpu_dais = &rtd->dais[0];
rtd->codec_dais = &rtd->dais[dai_link->num_cpus];
/* for single DAI */
rtd->cpu_dai = rtd->cpu_dais[0];
rtd->codec_dai = rtd->codec_dais[0];
But, these can be replaced by dais.
This patch adds asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/875zevk5va.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to an issue with PCIe wrapper logic built for the DWC PCIe IP on
dra7xx, the driver needs to ensure that there are no pending MSI IRQ
vector set (i.e PCIE_MSI_INTR0_STATUS reads 0 at least once) before
exiting IRQ handler otherwise the dra7xx PCIe wrapper will not register
new MSI IRQs even though PCIE_MSI_INTR0_STATUS reports IRQs are pending.
Therefore it's no longer possible to use default IRQ handler provided by
DWC library.
Add an irqchip implementation inside pci-dra7xx.c and install new MSI
IRQ handler to handle the above errata.
This fixes a bug, where PCIe wifi cards with 4 DMA queues like Intel
8260 used to throw following error and stall during ping/iperf3 tests.
[ 97.776310] iwlwifi 0000:01:00.0: Queue 9 stuck for 2500 ms.
Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
gcc 10 will default to -fno-common, which causes this error at link
time:
(.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here
This is because both dtc-lexer as well as dtc-parser define the same
global symbol yyloc. Before with -fcommon those were merged into one
defintion. The proper solution would be to to mark this as "extern",
however that leads to:
dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls]
26 | extern YYLTYPE yylloc;
| ^~~~~~
In file included from dtc-lexer.l:24:
dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here
127 | extern YYLTYPE yylloc;
| ^~~~~~
cc1: all warnings being treated as errors
which means the declaration is completely redundant and can just be
dropped.
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[robh: cherry-pick from upstream]
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The PERF_SAMPLE_CGROUP bit is to save (perf_event) cgroup information in
the sample. It will add a 64-bit id to identify current cgroup and it's
the file handle in the cgroup file system. Userspace should use this
information with PERF_RECORD_CGROUP event to match which cgroup it
belongs.
I put it before PERF_SAMPLE_AUX for simplicity since it just needs a
64-bit word. But if we want bigger samples, I can work on that
direction too.
Committer testing:
$ pahole perf_sample_data | grep -w cgroup -B5 -A5
/* --- cacheline 4 boundary (256 bytes) was 56 bytes ago --- */
struct perf_regs regs_intr; /* 312 16 */
/* --- cacheline 5 boundary (320 bytes) was 8 bytes ago --- */
u64 stack_user_size; /* 328 8 */
u64 phys_addr; /* 336 8 */
u64 cgroup; /* 344 8 */
/* size: 384, cachelines: 6, members: 22 */
/* padding: 32 */
};
$
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support cgroup tracking, add CGROUP event to save a link between
cgroup path and id number. This is needed since cgroups can go away
when userspace tries to read the cgroup info (from the id) later.
The attr.cgroup bit was also added to enable cgroup tracking from
userspace.
This event will be generated when a new cgroup becomes active.
Userspace might need to synthesize those events for existing cgroups.
Committer testing:
From the resulting kernel, using /sys/kernel/btf/vmlinux:
$ pahole perf_event_attr | grep -w cgroup -B5 -A1
__u64 write_backward:1; /* 40:27 8 */
__u64 namespaces:1; /* 40:28 8 */
__u64 ksymbol:1; /* 40:29 8 */
__u64 bpf_event:1; /* 40:30 8 */
__u64 aux_output:1; /* 40:31 8 */
__u64 cgroup:1; /* 40:32 8 */
__u64 __reserved_1:31; /* 40:33 8 */
$
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
[staticize perf_event_cgroup function]
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
