Before this patch, the freeze code in gfs2 specified GL_NOCACHE in
several places. That's wrong because we always want to know the state
of whether the file system is frozen.
There was also a problem with freeze/thaw transitioning the glock from
frozen (EX) to thawed (SH) because gfs2 will normally grant glocks in EX
to processes that request it in SH mode, unless GL_EXACT is specified.
Therefore, the freeze/thaw code, which tried to reacquire the glock in
SH mode would get the glock in EX mode, and miss the transition from EX
to SH. That made it think the thaw had completed normally, but since the
glock was still cached in EX, other nodes could not freeze again.
This patch removes the GL_NOCACHE flag to allow the freeze glock to be
cached. It also adds the GL_EXACT flag so the glock is fully transitioned
from EX to SH, thereby allowing future freeze operations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, only read-write mounts would grab the freeze
glock in read-only mode, as part of gfs2_make_fs_rw. So the freeze
glock was never initialized. That meant requests to freeze, which
request the glock in EX, were granted without any state transition.
That meant you could mount a gfs2 file system, which is currently
frozen on a different cluster node, in read-only mode.
This patch makes read-only mounts lock the freeze glock in SH mode,
which will block for file systems that are frozen on another node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function freeze_go_sync, called when promoting
the freeze glock, was testing for the SDF_JOURNAL_LIVE superblock flag.
That's only set for read-write mounts. Read-only mounts don't use a
journal, so the bit is never set, so the freeze never happened.
This patch removes the check for SDF_JOURNAL_LIVE for freeze requests
but still checks it when deciding whether to flush a journal.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In several places, we used the GIF_ORDERED inode flag to determine
if an inode was on the ordered writes list. However, since we always
held the sd_ordered_lock spin_lock during the manipulation, we can
just as easily check list_empty(&ip->i_ordered) instead.
This allows us to keep more than one ordered writes list to make
journal writing improvements.
This patch eliminates GIF_ORDERED in favor of checking list_empty.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
While e3a3c3a205 ("UIO: fix uio_pdrv_genirq with device tree but no
interrupt") added support for using uio_pdrv_genirq for devices without
interrupt for device tree platforms, the removal of uio_pdrv in
26dac3c49d ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead")
broke the support for non device tree platforms.
This change fixes this, so that uio_pdrv_genirq can be used without
interrupt on all platforms.
This still leaves the support that uio_pdrv had for custom interrupt
handler lacking, as uio_pdrv_genirq does not handle it (yet).
Fixes: 26dac3c49d ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200701145659.3978-3-esben@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value of 'maxsize' has not been checked since commit 729cac693e
("usb: dwc2: Change ISOC DDMA flow") back in 2018, so remove the set but
unused variable, which fixes the following W=1 kernel build warning:
drivers/usb/dwc2/gadget.c: In function ‘dwc2_gadget_fill_isoc_desc’:
drivers/usb/dwc2/gadget.c:885:6: warning: variable ‘maxsize’ set but not used [-Wunused-but-set-variable]
885 | u32 maxsize = 0;
| ^~~~~~~
Cc: Minas Harutyunyan <hminas@synopsys.com>
Cc: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file has a HUGE debugging sysfs file that spews out a lot of
information all at once, which violates the one-value-per-file rule for
sysfs. If this is really needed, it should go into debugfs, but given
the age of this driver, I strongly doubt anyone is using it anymore.
So just remove the file entirely, it was never documented, so obviously,
no one actually needed it :)
Cc: Felipe Balbi <balbi@kernel.org>
Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
Link: https://lore.kernel.org/r/20200702072914.1072878-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we assign 'epnum' during the declaration we can also avoid "ISO
C90 forbids mixed declarations" issues. So it does looks like we
can have our cake and eat it in this scenario.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/oxu210hp-hcd.c: In function ‘submit_async’:
drivers/usb/host/oxu210hp-hcd.c:2040:19: warning: variable ‘qtd’ set but not used [-Wunused-but-set-variable]
2040 | struct ehci_qtd *qtd;
| ^~~
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Cc: "Eurotech S.p.A" <info@eurtech.it>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'queue' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'node' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'hep' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'dev' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:35: warning: Function parameter or member 'next_frame' not described in 'c67x00_ep_data'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ly_base_addr' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'port_length' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'pid_ep' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'dev_addr' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ctrl_reg' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'status' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'retry_cnt' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'residue' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'next_td_addr' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'td_list' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'td_addr' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'data' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'urb' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'privdata' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'ep_data' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:71: warning: Function parameter or member 'pipe' not described in 'c67x00_td'
drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'c67x00' not described in 'dbg_td'
drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'td' not described in 'dbg_td'
drivers/usb/c67x00/c67x00-sched.c:137: warning: Function parameter or member 'msg' not described in 'dbg_td'
drivers/usb/c67x00/c67x00-sched.c:169: warning: Function parameter or member 'a' not described in 'frame_add'
drivers/usb/c67x00/c67x00-sched.c:169: warning: Function parameter or member 'b' not described in 'frame_add'
drivers/usb/c67x00/c67x00-sched.c:177: warning: Function parameter or member 'a' not described in 'frame_after'
drivers/usb/c67x00/c67x00-sched.c:177: warning: Function parameter or member 'b' not described in 'frame_after'
drivers/usb/c67x00/c67x00-sched.c:186: warning: Function parameter or member 'a' not described in 'frame_after_eq'
drivers/usb/c67x00/c67x00-sched.c:186: warning: Function parameter or member 'b' not described in 'frame_after_eq'
drivers/usb/c67x00/c67x00-sched.c:199: warning: Function parameter or member 'c67x00' not described in 'c67x00_release_urb'
drivers/usb/c67x00/c67x00-sched.c:199: warning: Function parameter or member 'urb' not described in 'c67x00_release_urb'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'c67x00' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'urb' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'data' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'len' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'pid' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'toggle' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:566: warning: Function parameter or member 'privdata' not described in 'c67x00_create_td'
drivers/usb/c67x00/c67x00-sched.c:692: warning: Function parameter or member 'c67x00' not described in 'c67x00_add_ctrl_urb'
drivers/usb/c67x00/c67x00-sched.c:692: warning: Function parameter or member 'urb' not described in 'c67x00_add_ctrl_urb'
drivers/usb/c67x00/c67x00-sched.c:830: warning: Function parameter or member 'c67x00' not described in 'c67x00_parse_td'
drivers/usb/c67x00/c67x00-sched.c:830: warning: Function parameter or member 'td' not described in 'c67x00_parse_td'
drivers/usb/c67x00/c67x00-sched.c:978: warning: Function parameter or member 'c67x00' not described in 'c67x00_check_td_list'
drivers/usb/c67x00/c67x00-sched.c:1052: warning: Function parameter or member 'c67x00' not described in 'c67x00_send_td'
drivers/usb/c67x00/c67x00-sched.c:1052: warning: Function parameter or member 'td' not described in 'c67x00_send_td'
drivers/usb/c67x00/c67x00-sched.c:1088: warning: Function parameter or member 'c67x00' not described in 'c67x00_do_work'
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-31-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/c67x00/c67x00-ll-hpi.c:269: warning: Function parameter or member 'sie' not described in 'c67x00_ll_usb_clear_status'
drivers/usb/c67x00/c67x00-ll-hpi.c:269: warning: Function parameter or member 'bits' not described in 'c67x00_ll_usb_clear_status'
drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'dev' not described in 'c67x00_ll_write_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'addr' not described in 'c67x00_ll_write_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'data' not described in 'c67x00_ll_write_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:404: warning: Function parameter or member 'len' not described in 'c67x00_ll_write_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'dev' not described in 'c67x00_ll_read_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'addr' not described in 'c67x00_ll_read_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'data' not described in 'c67x00_ll_read_mem_le16'
drivers/usb/c67x00/c67x00-ll-hpi.c:443: warning: Function parameter or member 'len' not described in 'c67x00_ll_read_mem_le16'
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-27-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/ohci.h in included by a whole much of different
sourcefiles. Not all of them make use of cc_to_error. So mark
it as __maybe_used to convey that this behaviour is not only
acceptable it's expected.
Fixes the following kernel build warning(s):
In file included from drivers/usb/host/ohci-pci.c:25:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-platform.c:32:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-exynos.c:20:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-spear.c:22:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-st.c:26:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-at91.c:31:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-s3c2410.c:32:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Roman Weissgaerber <weissg@vienna.at>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-22-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neither usb_hcd_at91_probe() nor usb_hcd_at91_remove()'s function
headers reach the standards required of a kerneldoc entry. Only
one attempt at describing an argument was made, as it is not
correct (we're removing that too to save confusion).
Fixes the following kernel build warning(s):
drivers/usb/host/ohci-at91.c:166: warning: Function parameter or member 'driver' not described in 'usb_hcd_at91_probe'
drivers/usb/host/ohci-at91.c:166: warning: Function parameter or member 'pdev' not described in 'usb_hcd_at91_probe'
drivers/usb/host/ohci-at91.c:259: warning: Function parameter or member 'hcd' not described in 'usb_hcd_at91_remove'
drivers/usb/host/ohci-at91.c:259: warning: Function parameter or member 'pdev' not described in 'usb_hcd_at91_remove'
drivers/usb/host/ohci-at91.c:259: warning: Excess function parameter 'dev' description in 'usb_hcd_at91_remove'
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It would seem a shame to strip out all of the unused register entries,
since they can act as a fair source of documentation. Instead, mark
them all as __maybe_unused to show the build system that this behaviour
is known and intentional.
Fixes the following kernel build warning(s):
In file included from drivers/usb/host/isp1362-hcd.c:96:
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGALTTMR’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:199:1: note: in expansion of macro ‘ISP1362_REG’
199 | ISP1362_REG(OTGALTTMR, 0x6C, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGTIMER’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:198:1: note: in expansion of macro ‘ISP1362_REG’
198 | ISP1362_REG(OTGTIMER, 0x6A, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGINTENB’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:197:1: note: in expansion of macro ‘ISP1362_REG’
197 | ISP1362_REG(OTGINTENB, 0x69, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGINT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:196:1: note: in expansion of macro ‘ISP1362_REG’
196 | ISP1362_REG(OTGINT, 0x68, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGSTATUS’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:195:1: note: in expansion of macro ‘ISP1362_REG’
195 | ISP1362_REG(OTGSTATUS, 0x67, REG_WIDTH_16, REG_ACCESS_R);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGCONTROL’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:194:1: note: in expansion of macro ‘ISP1362_REG’
194 | ISP1362_REG(OTGCONTROL, 0x62, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCATLPORT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:183:1: note: in expansion of macro ‘ISP1362_REG’
183 | ISP1362_REG(HCATLPORT, 0x44, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCINTLPORT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:175:1: note: in expansion of macro ‘ISP1362_REG’
175 | ISP1362_REG(HCINTLPORT, 0x43, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCISTL1PORT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:171:1: note: in expansion of macro ‘ISP1362_REG’
171 | ISP1362_REG(HCISTL1PORT, 0x42, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCISTL0PORT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:170:1: note: in expansion of macro ‘ISP1362_REG’
170 | ISP1362_REG(HCISTL0PORT, 0x40, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCINTDIS’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:77:1: note: in expansion of macro ‘ISP1362_REG’
77 | ISP1362_REG(HCINTDIS, 0x05, REG_WIDTH_32, REG_ACCESS_RW);
| ^~~~~~~~~~~
Cc: "by L. Wassmann" <LW@KARO-electronics.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mainline misspelled function argument descriptions. Also one
formatting issue with a missing '@' identifier.
Fixes the following W=1 build warnings:
drivers/usb/cdns3/gadget.c:653: warning: Function parameter or member 'priv_ep' not described in 'cdns3_wa2_descmissing_packet'
drivers/usb/cdns3/gadget.c:653: warning: Excess function parameter 'priv_dev' description in 'cdns3_wa2_descmissing_packet'
drivers/usb/cdns3/gadget.c:1088: warning: Function parameter or member 'request' not described in 'cdns3_ep_run_transfer'
drivers/usb/cdns3/gadget.c:2574: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_set_halt'
drivers/usb/cdns3/gadget.c:2574: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_set_halt'
drivers/usb/cdns3/gadget.c:2595: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_clear_halt'
drivers/usb/cdns3/gadget.c:2595: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_clear_halt'
drivers/usb/cdns3/gadget.c:2898: warning: Function parameter or member 'priv_dev' not described in 'cdns3_init_eps'
drivers/usb/cdns3/gadget.c:2898: warning: Excess function parameter 'cdns3' description in 'cdns3_init_eps'
drivers/usb/cdns3/gadget.c:3210: warning: Function parameter or member 'cdns' not described in 'cdns3_gadget_init'
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Pawel Jez <pjez@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add some missing function argument descriptions for 'ep', 'desc'
and 'zlp', and correct spelling/bitrot issues surrounding the
correct spelling of present args.
Fixes the following W=1 warnings:
drivers/usb/cdns3/ep0.c:36: warning: Function parameter or member 'zlp' not described in 'cdns3_ep0_run_transfer'
drivers/usb/cdns3/ep0.c:236: warning: Function parameter or member 'ctrl' not described in 'cdns3_req_ep0_get_status'
drivers/usb/cdns3/ep0.c:236: warning: Excess function parameter 'ctrl_req' description in 'cdns3_req_ep0_get_status'
drivers/usb/cdns3/ep0.c:411: warning: Function parameter or member 'ctrl' not described in 'cdns3_req_ep0_handle_feature'
drivers/usb/cdns3/ep0.c:411: warning: Excess function parameter 'ctrl_req' description in 'cdns3_req_ep0_handle_feature'
drivers/usb/cdns3/ep0.c:661: warning: Function parameter or member 'ep' not described in 'cdns3_gadget_ep0_enable'
drivers/usb/cdns3/ep0.c:661: warning: Function parameter or member 'desc' not described in 'cdns3_gadget_ep0_enable'
drivers/usb/cdns3/ep0.c:671: warning: Function parameter or member 'ep' not described in 'cdns3_gadget_ep0_disable'
drivers/usb/cdns3/ep0.c:867: warning: Function parameter or member 'priv_ep' not described in 'cdns3_init_ep0'
drivers/usb/cdns3/ep0.c:867: warning: Excess function parameter 'ep_priv' description in 'cdns3_init_ep0'
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Pawel Jez <pjez@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are 3 misspellings and 1 incorrect format used in this file's
kerneldoc function headers. Fixing them squashes the following W=1
kernel build warnings:
drivers/usb/cdns3/gadget.c:653: warning: Function parameter or member 'priv_ep' not described in 'cdns3_wa2_descmissing_packet'
drivers/usb/cdns3/gadget.c:653: warning: Excess function parameter 'priv_dev' description in 'cdns3_wa2_descmissing_packet'
drivers/usb/cdns3/gadget.c:1088: warning: Function parameter or member 'request' not described in 'cdns3_ep_run_transfer'
drivers/usb/cdns3/gadget.c:2574: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_set_halt'
drivers/usb/cdns3/gadget.c:2574: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_set_halt'
drivers/usb/cdns3/gadget.c:2595: warning: Function parameter or member 'priv_ep' not described in '__cdns3_gadget_ep_clear_halt'
drivers/usb/cdns3/gadget.c:2595: warning: Excess function parameter 'ep' description in '__cdns3_gadget_ep_clear_halt'
drivers/usb/cdns3/gadget.c:2898: warning: Function parameter or member 'priv_dev' not described in 'cdns3_init_eps'
drivers/usb/cdns3/gadget.c:2898: warning: Excess function parameter 'cdns3' description in 'cdns3_init_eps'
drivers/usb/cdns3/gadget.c:3210: warning: Function parameter or member 'cdns' not described in 'cdns3_gadget_init'
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly, demote function header to standard comment block as
they are not suitable for kerneldoc. Then provide description
for ulpi_register_driver()'s argument 'module'. Finally rename
description for ulpi_unregister_interface()'s 'ulpi' arg.
Fixes the following W=1 warnings:
drivers/usb/common/ulpi.c:23: warning: Function parameter or member 'ulpi' not described in 'ulpi_read'
drivers/usb/common/ulpi.c:23: warning: Function parameter or member 'addr' not described in 'ulpi_read'
drivers/usb/common/ulpi.c:150: warning: Function parameter or member 'module' not described in '__ulpi_register_driver'
drivers/usb/common/ulpi.c:299: warning: Function parameter or member 'ulpi' not described in 'ulpi_unregister_interface'
drivers/usb/common/ulpi.c:299: warning: Excess function parameter 'intrf' description in 'ulpi_unregister_interface'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Demote drd.c's file header to a standard comment block.
Fixes the following W=1 build warnings:
drivers/usb/dwc3/drd.c:20: warning: Function parameter or member 'dwc' not described in 'dwc3_otg_disable_events'
drivers/usb/dwc3/drd.c:20: warning: Function parameter or member 'disable_mask' not described in 'dwc3_otg_disable_events'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
File headers and simple comments are not kerneldoc worthy.
Fixes the following W=1 warnings:
drivers/usb/common/debug.c:15: warning: Function parameter or member 'bRequestType' not described in 'usb_decode_get_status'
drivers/usb/common/debug.c:15: warning: Function parameter or member 'wIndex' not described in 'usb_decode_get_status'
drivers/usb/common/debug.c:15: warning: Function parameter or member 'wLength' not described in 'usb_decode_get_status'
drivers/usb/common/debug.c:15: warning: Function parameter or member 'str' not described in 'usb_decode_get_status'
drivers/usb/common/debug.c:15: warning: Function parameter or member 'size' not described in 'usb_decode_get_status'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'str' not described in 'usb_decode_ctrl'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'size' not described in 'usb_decode_ctrl'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'bRequestType' not described in 'usb_decode_ctrl'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'bRequest' not described in 'usb_decode_ctrl'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'wValue' not described in 'usb_decode_ctrl'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'wIndex' not described in 'usb_decode_ctrl'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'wLength' not described in 'usb_decode_ctrl'
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
quirk_usb_handoff_xhci()'s function header is the only one across
the sourcefile which is denoted as a kerneldoc header. Despite
no attempt to document its arguments. Drop it down in status from
kerneldoc to a standard comment block to match the other headers
in the file.
Fixes the following W=1 kernel build warning:
drivers/usb/host/pci-quirks.c:1145: warning: Function parameter or member 'pdev' not described in 'quirk_usb_handoff_xhci'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Martin Mares <mj@ucw.cz>
Cc: aleksey_gorelov@phoenix.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kerneldoc expects arg descriptions to be in the format '@.*: '. If either
the '@' or the ':' is omitted then kerneldoc complains that the description
is missing. Add the missing ':'s here.
Also provide a new description for 'event'.
Fixes the following kernel build W=1 warnings:
drivers/usb/phy/phy.c:106: warning: Function parameter or member 'work' not described in 'usb_phy_notify_charger_work'
drivers/usb/phy/phy.c:172: warning: Function parameter or member 'nb' not described in 'usb_phy_get_charger_type'
drivers/usb/phy/phy.c:172: warning: Function parameter or member 'state' not described in 'usb_phy_get_charger_type'
drivers/usb/phy/phy.c:172: warning: Function parameter or member 'data' not described in 'usb_phy_get_charger_type'
drivers/usb/phy/phy.c:194: warning: Function parameter or member 'usb_phy' not described in 'usb_phy_set_charger_current'
drivers/usb/phy/phy.c:194: warning: Function parameter or member 'mA' not described in 'usb_phy_set_charger_current'
drivers/usb/phy/phy.c:244: warning: Function parameter or member 'usb_phy' not described in 'usb_phy_get_charger_current'
drivers/usb/phy/phy.c:244: warning: Function parameter or member 'min' not described in 'usb_phy_get_charger_current'
drivers/usb/phy/phy.c:244: warning: Function parameter or member 'max' not described in 'usb_phy_get_charger_current'
drivers/usb/phy/phy.c:281: warning: Function parameter or member 'usb_phy' not described in 'usb_phy_set_charger_state'
drivers/usb/phy/phy.c:281: warning: Function parameter or member 'state' not described in 'usb_phy_set_charger_state'
drivers/usb/phy/phy.c:427: warning: Function parameter or member 'dev' not described in 'devm_usb_get_phy'
drivers/usb/phy/phy.c:427: warning: Function parameter or member 'type' not described in 'devm_usb_get_phy'
drivers/usb/phy/phy.c:456: warning: Function parameter or member 'type' not described in 'usb_get_phy'
drivers/usb/phy/phy.c:500: warning: Function parameter or member 'dev' not described in 'devm_usb_get_phy_by_node'
drivers/usb/phy/phy.c:500: warning: Function parameter or member 'node' not described in 'devm_usb_get_phy_by_node'
drivers/usb/phy/phy.c:500: warning: Function parameter or member 'nb' not described in 'devm_usb_get_phy_by_node'
drivers/usb/phy/phy.c:558: warning: Function parameter or member 'dev' not described in 'devm_usb_get_phy_by_phandle'
drivers/usb/phy/phy.c:558: warning: Function parameter or member 'phandle' not described in 'devm_usb_get_phy_by_phandle'
drivers/usb/phy/phy.c:558: warning: Function parameter or member 'index' not described in 'devm_usb_get_phy_by_phandle'
drivers/usb/phy/phy.c:590: warning: Function parameter or member 'dev' not described in 'devm_usb_put_phy'
drivers/usb/phy/phy.c:590: warning: Function parameter or member 'phy' not described in 'devm_usb_put_phy'
drivers/usb/phy/phy.c:627: warning: Function parameter or member 'type' not described in 'usb_add_phy'
drivers/usb/phy/phy.c:721: warning: Function parameter or member 'event' not described in 'usb_phy_set_event'
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull m68knommu mm fixes from Greg Ungerer:
"Two critical mm related fixes that affect booting of m68k/ColdFire
devices.
Both fix problems caused by recent system init memblock changes"
* tag 'm68knommu-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: mm: fix node memblock init
m68k: nommu: register start of the memory with memblock
Pull devicetree fixes from Rob Herring:
- Sync dtc to upstream to pick up fixes for I2C bus checks and quiet
warnings
- Various fixes for DT binding check warnings
- A couple of build fixes/improvements for binding checks
- ReST formatting improvements for writing-schema.rst
- Document reference fixes
* tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: clock: imx: Fix e-mail address
dt-bindings: thermal: k3: Fix the reg property
dt-bindings: thermal: Remove soc unit address
dt-bindings: display: arm: versatile: Pass the sysreg unit name
dt-bindings: usb: aspeed: Remove the leading zeroes
dt-bindings: copy process-schema-examples.yaml to process-schema.yaml
dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check'
dt-bindings: fix error in 'make clean' after 'make dt_binding_check'
dt-bindings: mailbox: zynqmp_ipi: fix unit address
dt-bindings: bus: uniphier-system-bus: fix warning in example
scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c
doc: devicetree: bindings: fix spelling mistake
docs: dt: minor adjustments at writing-schema.rst
dt: fix reference to olpc,xo1.75-ec.txt
dt: Fix broken references to renamed docs
dt: fix broken links due to txt->yaml renames
dt: update a reference for reneases pcar file renamed to yaml
Pull data race annotation from Christian Brauner:
"This contains an annotation patch for a data race in copy_process()
reported by KCSAN when reading and writing nr_threads.
The data race is intentional and benign. This is obvious from the
comment above the relevant code and based on general consensus when
discussing this issue. So simply using data_race() to annotate this as
an intentional race seems the best option"
* tag 'for-linus-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fork: annotate data race in copy_process()
Pull tpm fixes from Jarkko Sakkinen:
"These are just fixes for bugs found lately.
All of them are small scale things here and there, and all of them are
for previous kernel releases (the oldest appeared in v2.6.17)"
* tag 'tpmdd-next-v5.8-rc4' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm_tis: Remove the HID IFX0102
tpm_tis_spi: Prefer async probe
tpm: ibmvtpm: Wait for ready buffer before probing for TPM2 attributes
tpm/st33zp24: fix spelling mistake "drescription" -> "description"
tpm_tis: extra chip->ops check on error path in tpm_tis_core_init
tpm_tis_spi: Don't send anything during flow control
tpm: Fix TIS locality timeout problems
Pull kselftest fixes from Shuah Khan:
"tpm test fixes from Jarkko Sakkinen"
* tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tpm: Use /bin/sh instead of /bin/bash
selftests: tpm: Use 'test -e' instead of 'test -f'
Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"
Pull kunit fixes from Shuah Khan
"Fixes for build and run-times failures.
Also includes troubleshooting tips updates to kunit user
documentation"
* tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: Add some troubleshooting tips to the FAQ
kunit: kunit_tool: Fix invalid result when build fails
kunit: show error if kunit results are not present
kunit: kunit_config: Fix parsing of CONFIG options with space
Pull nfsd fixes from Bruce Fields:
"Fixes for a umask bug on exported filesystems lacking ACL support, a
leak and a module unloading bug in the /proc/fs/nfsd/clients/ code,
and a compile warning"
* tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linux:
SUNRPC: Add missing definition of ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
nfsd: fix nfsdfs inode reference count leak
nfsd4: fix nfsdfs reference count loop
nfsd: apply umask on fs without ACL support
Pull block fixes from Jens Axboe:
- Use kvfree_sensitive() for the block keyslot free (Eric)
- Sync blk-mq debugfs flags (Hou)
- Memory leak fix in virtio-blk error path (Hou)
* tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
virtio-blk: free vblk-vqs in error path of virtblk_probe()
block/keyslot-manager: use kvfree_sensitive()
blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flags
Pull io_uring fixes from Jens Axboe:
"One fix in here, for a regression in 5.7 where a task is waiting in
the kernel for a condition, but that condition won't become true until
task_work is run. And the task_work can't be run exactly because the
task is waiting in the kernel, so we'll never make any progress.
One example of that is registering an eventfd and queueing io_uring
work, and then the task goes and waits in eventfd read with the
expectation that it'll get woken (and read an event) when the io_uring
request completes. The io_uring request is finished through task_work,
which won't get run while the task is looping in eventfd read"
* tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
io_uring: use signal based task_work running
task_work: teach task_work_add() to do signal_wake_up()
I would like that Claudiu becomes co-maintainer of the Cadence macb
driver. He's already participating to lots of reviews and enhancements
to this driver and knows the different versions of this controller.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of ports is incorrectly set to the maximum available for a DSA
switch. Even if the extra ports are not used, this causes some functions
to be called later, like port_disable() and port_stp_state_set(). If the
driver doesn't check the port index, it will end up modifying unknown
registers.
Fixes: b987e98e50 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
