LSK 18.07 v4.4-android
* tag 'lsk-v4.4-18.07-android': (254 commits)
Linux 4.4.143
net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL.
rds: avoid unenecessary cong_update in loop transport
KEYS: DNS: fix parsing multiple options
netfilter: ebtables: reject non-bridge targets
MIPS: Use async IPIs for arch_trigger_cpumask_backtrace()
MIPS: Call dump_stack() from show_regs()
rtlwifi: rtl8821ae: fix firmware is not ready to run
net: cxgb3_main: fix potential Spectre v1
net/mlx5: Fix command interface race in polling mode
net_sched: blackhole: tell upper qdisc about dropped packets
vhost_net: validate sock before trying to put its fd
tcp: prevent bogus FRTO undos with non-SACK flows
tcp: fix Fast Open key endianness
r8152: napi hangup fix after disconnect
qed: Limit msix vectors in kdump kernel to the minimum required count.
net: sungem: fix rx checksum support
net/mlx5: Fix incorrect raw command length parsing
net: dccp: switch rx_tstamp_last_feedback to monotonic clock
net: dccp: avoid crash in ccid3_hc_rx_send_feedback()
...
Fix wrong merge of include/linux/compiler-gcc.h
Change-Id: I1daae1251069d2791d2e29b65942d086fb8ad0ac
CVE-2017-0630
This likely breaks tracing tools like trace-cmd. It logs in the same
format but now addresses are all 0x0.
Bug: 34277115
Change-Id: Ifb0d4d2a184bf0d95726de05b1acee0287a375d9
Signed-off-by: Jian Qiu <qiujian@rock-chips.com>
Every time _cpu_up() is called for a CPU, idle_thread_get() is called
which then re-initializes a CPU's idle thread that was already
previously created and cached in a global variable in
smpboot.c. idle_thread_get() calls init_idle() which then calls
__sched_fork(). __sched_fork() is where cpufreq_task_times_init() is,
and cpufreq_task_times_init() allocates memory for the task struct's
time_in_state array.
Since idle_thread_get() reuses a task struct instance that was already
previously created, this means that every time it calls init_idle(),
cpufreq_task_times_init() allocates this array again and overwrites
the existing allocation that the idle thread already had.
This causes memory to be leaked every time a CPU is onlined. In order
to fix this, move allocation of time_in_state into _do_fork to avoid
allocating it at all for idle threads. The cpufreq times interface is
intended to be used for tracking userspace tasks, so we can safely
remove it from the kernel's idle threads without killing any
functionality.
But that's not all!
Task structs can be freed outside of release_task(), which creates
another memory leak because a task struct can be freed without having
its cpufreq times allocation freed. To fix this, free the cpufreq
times allocation at the same time that task struct allocations are
freed, in free_task().
Since free_task() can also be called in error paths of copy_process()
after dup_task_struct(), set time_in_state to NULL immediately after
calling dup_task_struct() to avoid possible double free.
Bug description and fix adapted from patch submitted by
Sultan Alsawaf <sultanxda@gmail.com> at
https://android-review.googlesource.com/c/kernel/msm/+/700134
Bug: 110044919
Test: Hikey960 builds, boots & reports /proc/<pid>/time_in_state
correctly
Change-Id: I12fe7611fc88eb7f6c39f8f7629ad27b6ec4722c
Signed-off-by: Connor O'Brien <connoro@google.com>
Add empty versions of functions to cpufreq_times.h to cut down on use
of #ifdef in .c files.
Test: kernel builds with and without CONFIG_CPU_FREQ_TIMES=y
Change-Id: I49ac364fac3d42bba0ca1801e23b15081094fb12
Signed-off-by: Connor O'Brien <connoro@google.com>
commit abcbcb80cd upstream.
For the common cases where 1000 is a multiple of HZ, or HZ is a multiple of
1000, jiffies_to_msecs() never returns zero when passed a non-zero time
period.
However, if HZ > 1000 and not an integer multiple of 1000 (e.g. 1024 or
1200, as used on alpha and DECstation), jiffies_to_msecs() may return zero
for small non-zero time periods. This may break code that relies on
receiving back a non-zero value.
jiffies_to_usecs() does not need such a fix: one jiffy can only be less
than one µs if HZ > 1000000, and such large values of HZ are already
rejected at build time, twice:
- include/linux/jiffies.h does #error if HZ >= 12288,
- kernel/time/time.c has BUILD_BUG_ON(HZ > USEC_PER_SEC).
Broken since forever.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-alpha@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622143357.7495-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* linux-linaro-lsk-v4.4: (361 commits)
Linux 4.4.135
Revert "vti4: Don't override MTU passed on link creation via IFLA_MTU"
Linux 4.4.134
s390/ftrace: use expoline for indirect branches
kdb: make "mdr" command repeat
Bluetooth: btusb: Add device ID for RTL8822BE
ASoC: samsung: i2s: Ensure the RCLK rate is properly determined
regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'
scsi: lpfc: Fix frequency of Release WQE CQEs
scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing
scsi: lpfc: Fix issue_lip if link is disabled
netlabel: If PF_INET6, check sk_buff ip header version
selftests/net: fixes psock_fanout eBPF test case
perf report: Fix memory corruption in --branch-history mode --branch-history
perf tests: Use arch__compare_symbol_names to compare symbols
x86/apic: Set up through-local-APIC mode on the boot CPU if 'noapic' specified
drm/rockchip: Respect page offset for PRIME mmap calls
MIPS: Octeon: Fix logging messages with spurious periods after newlines
audit: return on memory error to avoid null pointer dereference
crypto: sunxi-ss - Add MODULE_ALIAS to sun4i-ss
...
Conflicts:
arch/arm64/include/asm/assembler.h
Rebase LTS commit 348f043ab6
("arm64: Add work around for Arm Cortex-A55 Erratum 1024718").
fs/f2fs/namei.c
Rebase LTS commit 03bb758894
("do d_instantiate/unlock_new_inode combinations safely")
fs/proc/base.c
Trivial typo.
kernel/auditsc.c
Rebase LTS commit 9bb698bede
("audit: move calcs after alloc and check when logging set loginuid").
kernel/time/timekeeping.c
Rebase changes from AOSP commit 28850c79d0
("BACKPORT: time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting"), and
1d35c04386 ("BACKPORT: time: Clean up CLOCK_MONOTONIC_RAW time handling").
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
capacity_spare_wake in the slow path influences choice of idlest groups,
as we search for groups with maximum spare capacity. In scenarios where
RT pressure is high, a sub optimal group can be chosen and hurt
performance of the task being woken up.
Several tests with results are included below to show improvements with
this change.
1) Hackbench on Pixel 2 Android device (4x4 ARM64 Octa core)
------------------------------------------------------------
Here we have RT activity running on big CPU cluster induced with rt-app,
and running hackbench in parallel. The RT tasks are bound to 4 CPUs on
the big cluster (cpu 4,5,6,7) and have 100ms periodicity with
runtime=20ms sleep=80ms.
Hackbench shows big benefit (30%) improvement when number of tasks is 8
and 32: Note: data is completion time in seconds (lower is better).
Number of loops for 8 and 16 tasks is 50000, and for 32 tasks its 20000.
+--------+-----+-------+-------------------+---------------------------+
| groups | fds | tasks | Without Patch | With Patch |
+--------+-----+-------+---------+---------+-----------------+---------+
| | | | Mean | Stdev | Mean | Stdev |
| | | +-------------------+-----------------+---------+
| 1 | 8 | 8 | 1.0534 | 0.13722 | 0.7293 (+30.7%) | 0.02653 |
| 2 | 8 | 16 | 1.6219 | 0.16631 | 1.6391 (-1%) | 0.24001 |
| 4 | 8 | 32 | 1.2538 | 0.13086 | 1.1080 (+11.6%) | 0.16201 |
+--------+-----+-------+---------+---------+-----------------+---------+
2) Rohit ran barrier.c test (details below) with following improvements:
------------------------------------------------------------------------
This was Rohit's original use case for a patch he posted at [1] however
from his recent tests he showed my patch can replace his slow path
changes [1] and there's no need to selectively scan/skip CPUs in
find_idlest_group_cpu in the slow path to get the improvement he sees.
barrier.c (open_mp code) as a micro-benchmark. It does a number of
iterations and barrier sync at the end of each for loop.
Here barrier,c is running in along with ping on CPU 0 and 1 as:
'ping -l 10000 -q -s 10 -f hostX'
barrier.c can be found at:
http://www.spinics.net/lists/kernel/msg2506955.html
Following are the results for the iterations per second with this
micro-benchmark (higher is better), on a 44 core, 2 socket 88 Threads
Intel x86 machine:
+--------+------------------+---------------------------+
|Threads | Without patch | With patch |
| | | |
+--------+--------+---------+-----------------+---------+
| | Mean | Std Dev | Mean | Std Dev |
+--------+--------+---------+-----------------+---------+
|1 | 539.36 | 60.16 | 572.54 (+6.15%) | 40.95 |
|2 | 481.01 | 19.32 | 530.64 (+10.32%)| 56.16 |
|4 | 474.78 | 22.28 | 479.46 (+0.99%) | 18.89 |
|8 | 450.06 | 24.91 | 447.82 (-0.50%) | 12.36 |
|16 | 436.99 | 22.57 | 441.88 (+1.12%) | 7.39 |
|32 | 388.28 | 55.59 | 429.4 (+10.59%)| 31.14 |
|64 | 314.62 | 6.33 | 311.81 (-0.89%) | 11.99 |
+--------+--------+---------+-----------------+---------+
3) ping+hackbench test on bare-metal sever (Rohit ran this test)
----------------------------------------------------------------
Here hackbench is running in threaded mode along
with, running ping on CPU 0 and 1 as:
'ping -l 10000 -q -s 10 -f hostX'
This test is running on 2 socket, 20 core and 40 threads Intel x86
machine:
Number of loops is 10000 and runtime is in seconds (Lower is better).
+--------------+-----------------+--------------------------+
|Task Groups | Without patch | With patch |
| +-------+---------+----------------+---------+
|(Groups of 40)| Mean | Std Dev | Mean | Std Dev |
+--------------+-------+---------+----------------+---------+
|1 | 0.851 | 0.007 | 0.828 (+2.77%)| 0.032 |
|2 | 1.083 | 0.203 | 1.087 (-0.37%)| 0.246 |
|4 | 1.601 | 0.051 | 1.611 (-0.62%)| 0.055 |
|8 | 2.837 | 0.060 | 2.827 (+0.35%)| 0.031 |
|16 | 5.139 | 0.133 | 5.107 (+0.63%)| 0.085 |
|25 | 7.569 | 0.142 | 7.503 (+0.88%)| 0.143 |
+--------------+-------+---------+----------------+---------+
[1] https://patchwork.kernel.org/patch/9991635/
Matt Fleming also ran cyclictest and several different hackbench tests
on his test machines to santiy-check that the patch doesn't harm any
of his usecases.
Change-Id: Ibcedbb65273545ff2f4d1962b4eaca14072b1bd2
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Morten Ramussen <morten.rasmussen@arm.com>
Cc: Brendan Jackman <brendan.jackman@arm.com>
Tested-by: Rohit Jain <rohit.k.jain@oracle.com>
Tested-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
commit 86b389ff22 upstream.
If a instance has an event trigger enabled when it is freed, it could cause
an access of free memory. Here's the case that crashes:
# cd /sys/kernel/tracing
# mkdir instances/foo
# echo snapshot > instances/foo/events/initcall/initcall_start/trigger
# rmdir instances/foo
Would produce:
general protection fault: 0000 [#1] PREEMPT SMP PTI
Modules linked in: tun bridge ...
CPU: 5 PID: 6203 Comm: rmdir Tainted: G W 4.17.0-rc4-test+ #933
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
RIP: 0010:clear_event_triggers+0x3b/0x70
RSP: 0018:ffffc90003783de0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b2b RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800c7130ba0
RBP: ffffc90003783e00 R08: ffff8801131993f8 R09: 0000000100230016
R10: ffffc90003783d80 R11: 0000000000000000 R12: ffff8800c7130ba0
R13: ffff8800c7130bd8 R14: ffff8800cc093768 R15: 00000000ffffff9c
FS: 00007f6f4aa86700(0000) GS:ffff88011eb40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6f4a5aed60 CR3: 00000000cd552001 CR4: 00000000001606e0
Call Trace:
event_trace_del_tracer+0x2a/0xc5
instance_rmdir+0x15c/0x200
tracefs_syscall_rmdir+0x52/0x90
vfs_rmdir+0xdb/0x160
do_rmdir+0x16d/0x1c0
__x64_sys_rmdir+0x17/0x20
do_syscall_64+0x55/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
This was due to the call the clears out the triggers when an instance is
being deleted not removing the trigger from the link list.
Cc: stable@vger.kernel.org
Fixes: 85f2b08268 ("tracing: Add basic event trigger framework")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LSK 18.05 v4.4-android
* tag 'lsk-v4.4-18.05-android': (605 commits)
ANDROID: sdcardfs: Don't d_drop in d_revalidate
goldfish: pipe: ANDROID: mark local functions static
UPSTREAM: ANDROID: binder: prevent transactions into own process.
goldfish: pipe: ANDROID: Add DMA support
UPSTREAM: f2fs: clear PageError on writepage - part 2
UPSTREAM: f2fs: avoid fsync() failure caused by EAGAIN in writepage()
ANDROID: x86_64_cuttlefish_defconfig: Disable KPTI
UPSTREAM: mac80211: ibss: Fix channel type enum in ieee80211_sta_join_ibss()
UPSTREAM: mac80211: Fix clang warning about constant operand in logical operation
UPSTREAM: nl80211: Fix enum type of variable in nl80211_put_sta_rate()
UPSTREAM: sysfs: remove signedness from sysfs_get_dirent
UPSTREAM: tracing: Use cpumask_available() to check if cpumask variable may be used
BACKPORT: clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK
UPSTREAM: netpoll: Fix device name check in netpoll_setup()
FROMLIST: staging: Fix sparse warnings in vsoc driver.
FROMLIST: staging: vsoc: Fix a i386-randconfig warning.
FROMLIST: staging: vsoc: Create wc kernel mapping for region shm.
goldfish: pipe: ANDROID: Replace writel with gf_write_ptr
goldfish: pipe: ANDROID: Use dev_ logging instead of pr_
goldfish: pipe: ANDROID: fix checkpatch warnings
...
Conflicts:
fs/f2fs/node.c
scripts/Makefile.lib
Change-Id: Ib92d11938a383464249fe6f2dad3ab2a05bc4770
[ Upstream commit 23138ead27 ]
If there is a memory allocation error when trying to change an audit
kernel feature value, the ignored allocation error will trigger a NULL
pointer dereference oops on subsequent use of that pointer. Return
instead.
Passes audit-testsuite.
See: https://github.com/linux-audit/audit-kernel/issues/76
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: not necessary (other funcs check for NULL), but a good practice]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9e5b127d6f ]
Mark reported his arm64 perf fuzzer runs sometimes splat like:
armv8pmu_read_counter+0x1e8/0x2d8
armpmu_event_update+0x8c/0x188
armpmu_read+0xc/0x18
perf_output_read+0x550/0x11e8
perf_event_read_event+0x1d0/0x248
perf_event_exit_task+0x468/0xbb8
do_exit+0x690/0x1310
do_group_exit+0xd0/0x2b0
get_signal+0x2e8/0x17a8
do_signal+0x144/0x4f8
do_notify_resume+0x148/0x1e8
work_pending+0x8/0x14
which asserts that we only call pmu::read() on ACTIVE events.
The above callchain does:
perf_event_exit_task()
perf_event_exit_task_context()
task_ctx_sched_out() // INACTIVE
perf_event_exit_event()
perf_event_set_state(EXIT) // EXIT
sync_child_event()
perf_event_read_event()
perf_output_read()
perf_output_read_group()
leader->pmu->read()
Which results in doing a pmu::read() on an !ACTIVE event.
I _think_ this is 'new' since we added attr.inherit_stat, which added
the perf_event_read_event() to the exit path, without that
perf_event_read_output() would only trigger from samples and for
@event to trigger a sample, it's leader _must_ be ACTIVE too.
Still, adding this check makes it consistent with the @sub case for
the siblings.
Reported-and-Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d29a20645d ]
While running rt-tests' pi_stress program I got the following splat:
rq->clock_update_flags < RQCF_ACT_SKIP
WARNING: CPU: 27 PID: 0 at kernel/sched/sched.h:960 assert_clock_updated.isra.38.part.39+0x13/0x20
[...]
<IRQ>
enqueue_top_rt_rq+0xf4/0x150
? cpufreq_dbs_governor_start+0x170/0x170
sched_rt_rq_enqueue+0x65/0x80
sched_rt_period_timer+0x156/0x360
? sched_rt_rq_enqueue+0x80/0x80
__hrtimer_run_queues+0xfa/0x260
hrtimer_interrupt+0xcb/0x220
smp_apic_timer_interrupt+0x62/0x120
apic_timer_interrupt+0xf/0x20
</IRQ>
[...]
do_idle+0x183/0x1e0
cpu_startup_entry+0x5f/0x70
start_secondary+0x192/0x1d0
secondary_startup_64+0xa5/0xb0
We can get rid of it be the "traditional" means of adding an
update_rq_clock() call after acquiring the rq->lock in
do_sched_rt_period_timer().
The case for the RT task throttling (which this workload also hits)
can be ignored in that the skip_update call is actually bogus and
quite the contrary (the request bits are removed/reverted).
By setting RQCF_UPDATED we really don't care if the skip is happening
or not and will therefore make the assert_clock_updated() check happy.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: linux-kernel@vger.kernel.org
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20180402164954.16255-1-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c917e0f259 ]
When a perf_event is attached to parent cgroup, it should count events
for all children cgroups:
parent_group <---- perf_event
\
- child_group <---- process(es)
However, in our tests, we found this perf_event cannot report reliable
results. Here is an example case:
# create cgroups
mkdir -p /sys/fs/cgroup/p/c
# start perf for parent group
perf stat -e instructions -G "p"
# on another console, run test process in child cgroup:
stressapptest -s 2 -M 1000 & echo $! > /sys/fs/cgroup/p/c/cgroup.procs
# after the test process is done, stop perf in the first console shows
<not counted> instructions p
The instruction should not be "not counted" as the process runs in the
child cgroup.
We found this is because perf_event->cgrp and cpuctx->cgrp are not
identical, thus perf_event->cgrp are not updated properly.
This patch fixes this by updating perf_cgroup properly for ancestor
cgroup(s).
Reported-by: Ephraim Park <ephiepark@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <jolsa@redhat.com>
Cc: <kernel-team@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20180312165943.1057894-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 537f4146c5 ]
Never directly free @dev after calling device_register(), even
if it returned an error! Always use put_device() to give up the
reference initialized in this function instead.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 11dc13224c ]
When queuing on the qspinlock, the count field for the current CPU's head
node is incremented. This needn't be atomic because locking in e.g. IRQ
context is balanced and so an IRQ will return with node->count as it
found it.
However, the compiler could in theory reorder the initialisation of
node[idx] before the increment of the head node->count, causing an
IRQ to overwrite the initialised node and potentially corrupt the lock
state.
Avoid the potential for this harmful compiler reordering by placing a
barrier() between the increment of the head node->count and the subsequent
node initialisation.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1518528177-19169-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 328008a72d ]
The declaration for swsusp_arch_resume marks it as 'asmlinkage', but the
definition in x86-32 does not, and it fails to include the header with the
declaration. This leads to a warning when building with
link-time-optimizations:
kernel/power/power.h:108:23: error: type of 'swsusp_arch_resume' does not match original declaration [-Werror=lto-type-mismatch]
extern asmlinkage int swsusp_arch_resume(void);
^
arch/x86/power/hibernate_32.c:148:0: note: 'swsusp_arch_resume' was previously declared here
int swsusp_arch_resume(void)
This moves the declaration into a globally visible header file and fixes up
both x86 definitions to match it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Len Brown <len.brown@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Link: https://lkml.kernel.org/r/20180202145634.200291-2-arnd@arndb.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d88d56c58 upstream.
Due to how the MONOTONIC_RAW accumulation logic was handled,
there is the potential for a 1ns discontinuity when we do
accumulations. This small discontinuity has for the most part
gone un-noticed, but since ARM64 enabled CLOCK_MONOTONIC_RAW
in their vDSO clock_gettime implementation, we've seen failures
with the inconsistency-check test in kselftest.
This patch addresses the issue by using the same sub-ns
accumulation handling that CLOCK_MONOTONIC uses, which avoids
the issue for in-kernel users.
Since the ARM64 vDSO implementation has its own clock_gettime
calculation logic, this patch reduces the frequency of errors,
but failures are still seen. The ARM64 vDSO will need to be
updated to include the sub-nanosecond xtime_nsec values in its
calculation for this issue to be completely fixed.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Daniel Mentz <danielmentz@google.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: "stable #4 . 8+" <stable@vger.kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Link: http://lkml.kernel.org/r/1496965462-20003-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[fabrizio: cherry-pick to 4.4. Kept cycle_t type for function
logarithmic_accumulation local variable "interval". Dropped
casting of "interval" variable]
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7be96af89 upstream.
When running certain database workload on a high-end system with many
CPUs, it was found that spinlock contention in the sigprocmask syscalls
became a significant portion of the overall CPU cycles as shown below.
9.30% 9.30% 905387 dataserver /proc/kcore 0x7fff8163f4d2
[k] _raw_spin_lock_irq
|
---_raw_spin_lock_irq
|
|--99.34%-- __set_current_blocked
| sigprocmask
| sys_rt_sigprocmask
| system_call_fastpath
| |
| |--50.63%-- __swapcontext
| | |
| | |--99.91%-- upsleepgeneric
| |
| |--49.36%-- __setcontext
| | ktskRun
Looking further into the swapcontext function in glibc, it was found that
the function always call sigprocmask() without checking if there are
changes in the signal mask.
A check was added to the __set_current_blocked() function to avoid taking
the sighand->siglock spinlock if there is no change in the signal mask.
This will prevent unneeded spinlock contention when many threads are
trying to call sigprocmask().
With this patch applied, the spinlock contention in sigprocmask() was
gone.
Link: http://lkml.kernel.org/r/1474979209-11867-1-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d70ef22892 upstream.
sign_extend32 counts the sign bit parameter from 0, not from 1. So we
have to use "11" for 12th bit, not "12".
This mistake means we have not allowed negative op and cmp args since
commit 30d6e0a419 ("futex: Remove duplicated code and fix undefined
behaviour") till now.
Fixes: 30d6e0a419 ("futex: Remove duplicated code and fix undefined behaviour")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48fb6f4db9 upstream.
Commit 65d8fc777f ("futex: Remove requirement for lock_page() in
get_futex_key()") removed an unnecessary lock_page() with the
side-effect that page->mapping needed to be treated very carefully.
Two defensive warnings were added in case any assumption was missed and
the first warning assumed a correct application would not alter a
mapping backing a futex key. Since merging, it has not triggered for
any unexpected case but Mark Rutland reported the following bug
triggering due to the first warning.
kernel BUG at kernel/futex.c:679!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 3695 Comm: syz-executor1 Not tainted 4.13.0-rc3-00020-g307fec773ba3 #3
Hardware name: linux,dummy-virt (DT)
task: ffff80001e271780 task.stack: ffff000010908000
PC is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679
LR is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679
pc : [<ffff00000821ac14>] lr : [<ffff00000821ac14>] pstate: 80000145
The fact that it's a bug instead of a warning was due to an unrelated
arm64 problem, but the warning itself triggered because the underlying
mapping changed.
This is an application issue but from a kernel perspective it's a
recoverable situation and the warning is unnecessary so this patch
removes the warning. The warning may potentially be triggered with the
following test program from Mark although it may be necessary to adjust
NR_FUTEX_THREADS to be a value smaller than the number of CPUs in the
system.
#include <linux/futex.h>
#include <pthread.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <sys/syscall.h>
#include <sys/time.h>
#include <unistd.h>
#define NR_FUTEX_THREADS 16
pthread_t threads[NR_FUTEX_THREADS];
void *mem;
#define MEM_PROT (PROT_READ | PROT_WRITE)
#define MEM_SIZE 65536
static int futex_wrapper(int *uaddr, int op, int val,
const struct timespec *timeout,
int *uaddr2, int val3)
{
syscall(SYS_futex, uaddr, op, val, timeout, uaddr2, val3);
}
void *poll_futex(void *unused)
{
for (;;) {
futex_wrapper(mem, FUTEX_CMP_REQUEUE_PI, 1, NULL, mem + 4, 1);
}
}
int main(int argc, char *argv[])
{
int i;
mem = mmap(NULL, MEM_SIZE, MEM_PROT,
MAP_SHARED | MAP_ANONYMOUS, -1, 0);
printf("Mapping @ %p\n", mem);
printf("Creating futex threads...\n");
for (i = 0; i < NR_FUTEX_THREADS; i++)
pthread_create(&threads[i], NULL, poll_futex, NULL);
printf("Flipping mapping...\n");
for (;;) {
mmap(mem, MEM_SIZE, MEM_PROT,
MAP_FIXED | MAP_SHARED | MAP_ANONYMOUS, -1, 0);
}
return 0;
}
Reported-and-tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76a658c20e upstream.
Move the calculations of values after the allocation in case the
allocation fails. This avoids wasting effort in the rare case that it
fails, but more importantly saves us extra logic to release the tty
ref.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the following clang warning:
kernel/trace/trace.c:3231:12: warning: address of array 'iter->started'
will always evaluate to 'true' [-Wpointer-bool-conversion]
if (iter->started)
Link: http://lkml.kernel.org/r/20170421234110.117075-1-mka@chromium.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
(cherry picked from commit 4dbbe2d8e9)
Bug: 78886293
Change-Id: Ib17a68ce55ca80b04bdea2d232f8ca9f88b1b8a3
Signed-off-by: Alistair Strachan <astrachan@google.com>
hrtimer_init_on_stack() needs a matching call to
destroy_hrtimer_on_stack(), so both need to be exported.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit c08376ac97)
[astrachan: Fixes i386-allmodconfig build failure in vsoc.ko noticed
by 01.org kbuild-all project building kernel/msm]
Bug: 78036828
Change-Id: If4d5c466255019322ea21ef38ee5b1b382cce969
Signed-off-by: Alistair Strachan <astrachan@google.com>
Add support for reporting per-uid information through procfs, roughly
following the approach used for per-tid and per-tgid directories in
fs/proc/base.c.
This also entails some new tracking of which uids have been used, to
avoid losing information when the last task with a given uid exits.
Signed-off-by: Connor O'Brien <connoro@google.com>
Bug: 72339335
Test: ls /proc/uid/; compare with UIDs in /proc/uid_time_in_state
Change-Id: I0908f0c04438b11ceb673d860e58441bf503d478
Add time in state data to task structs, and create
/proc/<pid>/time_in_state files to show how long each individual task
has run at each frequency.
Create a CONFIG_CPU_FREQ_TIMES option to enable/disable this tracking.
Signed-off-by: Connor O'Brien <connoro@google.com>
Bug: 72339335
Test: Read /proc/<pid>/time_in_state
Change-Id: Ia6456754f4cb1e83b2bc35efa8fbe9f8696febc8
* linux-linaro-lsk-v4.4: (515 commits)
Linux 4.4.132
perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map()
perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[]
perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver
perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr
perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_*
tracing/uprobe_event: Fix strncpy corner case
Revert "Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174"
atm: zatm: Fix potential Spectre v1
net: atm: Fix potential Spectre v1
can: kvaser_usb: Increase correct stats counter in kvaser_usb_rx_can_msg()
tracing: Fix regex_match_front() to not over compare the test string
libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs
rfkill: gpio: fix memory leak in probe error path
xfrm_user: fix return value from xfrm_user_rcv_msg
f2fs: fix a dead loop in f2fs_fiemap()
bdi: Fix oops in wb_workfn()
tcp: fix TCP_REPAIR_QUEUE bound checking
perf: Remove superfluous allocation error check
soreuseport: initialise timewait reuseport field
...
Conflicts:
arch/s390/kernel/module.c
arch/x86/kernel/kprobes/core.c
fs/proc/task_mmu.c
net/ipv6/route.c
Trivial conflicts between AOSP/LSK and backported/rebased LTS changes.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
commit dc432c3d7f upstream.
The regex match function regex_match_front() in the tracing filter logic,
was fixed to test just the pattern length from testing the entire test
string. That is, it went from strncmp(str, r->pattern, len) to
strcmp(str, r->pattern, r->len).
The issue is that str is not guaranteed to be nul terminated, and if r->len
is greater than the length of str, it can access more memory than is
allocated.
The solution is to add a simple test if (len < r->len) return 0.
Cc: stable@vger.kernel.org
Fixes: 285caad415 ("tracing/filters: Fix MATCH_FRONT_ONLY filter matching")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
