Use the corrent function parameter name or format to prevent
kernel-doc warnings.
Add 2 function parameter descriptions to prevent kernel-doc warnings.
llc_pdu.h:278: warning: Function parameter or member 'da' not described in 'llc_pdu_decode_da'
llc_pdu.h:278: warning: Excess function parameter 'sa' description in 'llc_pdu_decode_da'
llc_pdu.h:330: warning: Function parameter or member 'skb' not described in 'llc_pdu_init_as_test_cmd'
llc_pdu.h:379: warning: Function parameter or member 'svcs_supported' not described in 'llc_pdu_init_as_xid_cmd'
llc_pdu.h:379: warning: Function parameter or member 'rx_window' not described in 'llc_pdu_init_as_xid_cmd'
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230714045127.18752-7-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Spell function or struct member names correctly.
Use ':' instead of '-' for struct member entries.
Mark one field as private in kernel-doc.
Add a few entries that were missing.
Fix a typo.
These changes prevent kernel-doc warnings:
devlink.h:252: warning: Function parameter or member 'field_id' not described in 'devlink_dpipe_match'
devlink.h:267: warning: Function parameter or member 'field_id' not described in 'devlink_dpipe_action'
devlink.h:310: warning: Function parameter or member 'match_values_count' not described in 'devlink_dpipe_entry'
devlink.h:355: warning: Function parameter or member 'list' not described in 'devlink_dpipe_table'
devlink.h:374: warning: Function parameter or member 'actions_dump' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'matches_dump' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'entries_dump' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'counters_set_update' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'size_get' not described in 'devlink_dpipe_table_ops'
devlink.h:384: warning: Function parameter or member 'headers' not described in 'devlink_dpipe_headers'
devlink.h:384: warning: Function parameter or member 'headers_count' not described in 'devlink_dpipe_headers'
devlink.h:398: warning: Function parameter or member 'unit' not described in 'devlink_resource_size_params'
devlink.h:487: warning: Function parameter or member 'id' not described in 'devlink_param'
devlink.h:645: warning: Function parameter or member 'overwrite_mask' not described in 'devlink_flash_update_params'
Fixes: 1555d204e7 ("devlink: Support for pipeline debug (dpipe)")
Fixes: d9f9b9a4d0 ("devlink: Add support for resource abstraction")
Fixes: eabaef1896 ("devlink: Add devlink_param register and unregister")
Fixes: 5d5b4128c4 ("devlink: introduce flash update overwrite mask")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Moshe Shemesh <moshe@mellanox.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230714045127.18752-5-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an enum heading to the kernel-doc comments to prevent
kernel-doc warnings.
cfg802154.h:174: warning: Cannot understand * @WPAN_PHY_FLAG_TRANSMIT_POWER: Indicates that transceiver will support
on line 174 - I thought it was a doc line
cfg802154.h:192: warning: Enum value 'WPAN_PHY_FLAG_TXPOWER' not described in enum 'wpan_phy_flags'
cfg802154.h:192: warning: Excess enum value 'WPAN_PHY_FLAG_TRANSMIT_POWER' description in 'wpan_phy_flags'
Fixes: edea8f7c75 ("cfg802154: introduce wpan phy flags")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230714045127.18752-3-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull x86 CFI fixes from Peter Zijlstra:
"Fix kCFI/FineIBT weaknesses
The primary bug Alyssa noticed was that with FineIBT enabled function
prologues have a spurious ENDBR instruction:
__cfi_foo:
endbr64
subl $hash, %r10d
jz 1f
ud2
nop
1:
foo:
endbr64 <--- *sadface*
This means that any indirect call that fails to target the __cfi
symbol and instead targets (the regular old) foo+0, will succeed due
to that second ENDBR.
Fixing this led to the discovery of a single indirect call that was
still doing this: ret_from_fork(). Since that's an assembly stub the
compiler would not generate the proper kCFI indirect call magic and it
would not get patched.
Brian came up with the most comprehensive fix -- convert the thing to
C with only a very thin asm wrapper. This ensures the kernel thread
boostrap is a proper kCFI call.
While discussing all this, Kees noted that kCFI hashes could/should be
poisoned to seal all functions whose address is never taken, further
limiting the valid kCFI targets -- much like we already do for IBT.
So what was a 'simple' observation and fix cascaded into a bunch of
inter-related CFI infrastructure fixes"
* tag 'x86_urgent_for_6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cfi: Only define poison_cfi() if CONFIG_X86_KERNEL_IBT=y
x86/fineibt: Poison ENDBR at +0
x86: Rewrite ret_from_fork() in C
x86/32: Remove schedule_tail_wrapper()
x86/cfi: Extend ENDBR sealing to kCFI
x86/alternative: Rename apply_ibt_endbr()
x86/cfi: Extend {JMP,CAKK}_NOSPEC comment
Pull SCSI fixes from James Bottomley:
"This is a bunch of small driver fixes and a larger rework of zone disk
handling (which reaches into blk and nvme).
The aacraid array-bounds fix is now critical since the security people
turned on -Werror for some build tests, which now fail without it"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: storvsc: Handle SRB status value 0x30
scsi: block: Improve checks in blk_revalidate_disk_zones()
scsi: block: virtio_blk: Set zone limits before revalidating zones
scsi: block: nullblk: Set zone limits before revalidating zones
scsi: nvme: zns: Set zone limits before revalidating zones
scsi: sd_zbc: Set zone limits before revalidating zones
scsi: ufs: core: Add support for qTimestamp attribute
scsi: aacraid: Avoid -Warray-bounds warning
scsi: ufs: ufs-mediatek: Add dependency for RESET_CONTROLLER
scsi: ufs: core: Update contact email for monitor sysfs nodes
scsi: scsi_debug: Remove dead code
scsi: qla2xxx: Use vmalloc_array() and vcalloc()
scsi: fnic: Use vmalloc_array() and vcalloc()
scsi: qla2xxx: Fix error code in qla2x00_start_sp()
scsi: qla2xxx: Silence a static checker warning
scsi: lpfc: Fix a possible data race in lpfc_unregister_fcf_rescan()
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Don't require quirk to use duplicate namespace identifiers
(Christoph, Sagi)
- One more BOGUS_NID quirk (Pankaj)
- IO timeout and error hanlding fixes for PCI (Keith)
- Enhanced metadata format mask fix (Ankit)
- Association race condition fix for fibre channel (Michael)
- Correct debugfs error checks (Minjie)
- Use PAGE_SECTORS_SHIFT where needed (Damien)
- Reduce kernel logs for legacy nguid attribute (Keith)
- Use correct dma direction when unmapping metadata (Ming)
- Fix for a flush handling regression in this release (Christoph)
- Fix for batched request time stamping (Chengming)
- Fix for a regression in the mq-deadline position calculation (Bart)
- Lockdep fix for blk-crypto (Eric)
- Fix for a regression in the Amiga partition handling changes
(Michael)
* tag 'block-6.5-2023-07-14' of git://git.kernel.dk/linux:
block: queue data commands from the flush state machine at the head
blk-mq: fix start_time_ns and alloc_time_ns for pre-allocated rq
nvme-pci: fix DMA direction of unmapping integrity data
nvme: don't reject probe due to duplicate IDs for single-ported PCIe devices
block/mq-deadline: Fix a bug in deadline_from_pos()
nvme: ensure disabling pairs with unquiesce
nvme-fc: fix race between error recovery and creating association
nvme-fc: return non-zero status code when fails to create association
nvme: fix parameter check in nvme_fault_inject_init()
nvme: warn only once for legacy uuid attribute
block: remove dead struc request->completion_data field
nvme: fix the NVME_ID_NS_NVM_STS_MASK definition
nvmet: use PAGE_SECTORS_SHIFT
nvme: add BOGUS_NID quirk for Samsung SM953
blk-crypto: use dynamic lock class for blk_crypto_profile::lock
block/partition: fix signedness issue for Amiga partitions
Pull io_uring fix from Jens Axboe:
"Just a single tweak for the wait logic in io_uring"
* tag 'io_uring-6.5-2023-07-14' of git://git.kernel.dk/linux:
io_uring: Use io_schedule* in cqring wait
For those PMU system registers defined in sys_reg_descs[], use macro
PMU_SYS_REG() / PMU_PMEVCNTR_EL0 / PMU_PMEVTYPER_EL0 to define them, and
later two macros call macro PMU_SYS_REG() actually.
Currently the input parameter of PMU_SYS_REG() is another macro which is
calculation formula of the value of system registers, so for example, if
we want to "SYS_PMINTENSET_EL1" as the name of sys register, actually
the name we get is as following:
(((3) << 19) | ((0) << 16) | ((9) << 12) | ((14) << 8) | ((1) << 5))
The name of system register is used in some tracepoints such as
trace_kvm_sys_access(), if not set correctly, we need to analyze the
inaccurate name to get the exact name (which also is inconsistent with
other system registers), and also the inaccurate name occupies more space.
To fix the issue, use the name as a input parameter of PMU_SYS_REG like
MTE_REG or EL2_REG.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1689305920-170523-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The PMU event ID varies from 10 to 16 bits, depending on the PMU
version. If the PMU only supports 10 bits of event ID, bits [15:10] of
the evtCount field behave as RES0.
While the actual PMU emulation code gets this right (i.e. RES0 bits are
masked out when programming the perf event), the sysreg emulation writes
an unmasked value to the in-memory cpu context. The net effect is that
guest reads and writes of PMEVTYPER<n>_EL0 will see non-RES0 behavior in
the reserved bits of the field.
As it so happens, kvm_pmu_set_counter_event_type() already writes a
masked value to the in-memory context that gets overwritten by
access_pmu_evtyper(). Fix the issue by removing the unnecessary (and
incorrect) register write in access_pmu_evtyper().
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20230713221649.3889210-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When FW_LOADER is disabled, cxl fails to link:
arm-linux-gnueabi-ld: drivers/cxl/core/memdev.o: in function `cxl_memdev_setup_fw_upload':
memdev.c:(.text+0x90e): undefined reference to `firmware_upload_register'
memdev.c:(.text+0x93c): undefined reference to `firmware_upload_unregister'
In order to use the firmware_upload_register() function, both FW_LOADER
and FW_UPLOAD have to be enabled, which is a bit confusing. In addition,
the dependency is on the wrong symbol, as the caller is part of the
cxl_core.ko module, not the cxl_mem.ko module.
Fixes: 9521875bbe ("cxl: add a firmware update mechanism using the sysfs firmware loader")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230703112928.332321-1-arnd@kernel.org
Reviewed-by: Xiao Yang <yangx.jy@fujitsu.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
We have seen rare IO stalls as follows:
* blk_mq_plug_issue_direct() is entered with an mq_list containing two
requests.
* For the first request, it sets last == false and enters the driver's
queue_rq callback.
* The driver queue_rq callback indirectly calls schedule() which calls
blk_flush_plug(). This may happen if the driver has the
BLK_MQ_F_BLOCKING flag set and is allowed to sleep in ->queue_rq.
* blk_flush_plug() handles the remaining request in the mq_list. mq_list
is now empty.
* The original call to queue_rq resumes (with last == false).
* The loop in blk_mq_plug_issue_direct() terminates because there are no
remaining requests in mq_list.
The IO is now stalled because the last request submitted to the driver
had last == false and there was no subsequent call to commit_rqs().
Fix this by returning early in blk_mq_flush_plug_list() if rq_count is 0
which it will be in the recursive case, rather than checking if the
mq_list is empty. At the same time, adjust one of the callers to skip
the mq_list empty check as it is not necessary.
Fixes: dc5fc361d8 ("block: attempt direct issue of plug list")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230714101106.3635611-1-ross.lagerwall@citrix.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The build failure reported in [1] occurred because commit <9fc96c7c19df>
("selftests: error out if kernel header files are not yet built") added
a new "kernel_header_files" dependency to "all", and that triggered
another, pre-existing problem. Specifically, the arm64 selftests
override the emit_tests target, and that override improperly declares
itself to depend upon the "all" target.
This is a problem because the "emit_tests" target in lib.mk was not
intended to be overridden. emit_tests is a very simple, sequential build
target that was originally invoked from the "install" target, which in
turn, depends upon "all".
That approach worked for years. But with 9fc96c7c19 in place,
emit_tests failed, because it does not set up all of the elaborate
things that "install" does. And that caused the new
"kernel_header_files" target (which depends upon $(KBUILD_OUTPUT) being
correct) to fail.
Some detail: The "all" target is .PHONY. Therefore, each target that
depends on "all" will cause it to be invoked again, and because
dependencies are managed quite loosely in the selftests Makefiles, many
things will run, even "all" is invoked several times in immediate
succession. So this is not a "real" failure, as far as build steps go:
everything gets built, but "all" reports a problem when invoked a second
time from a bad environment.
To fix this, simply remove the unnecessary "all" dependency from the
overridden emit_tests target. The dependency is still effectively
honored, because again, invocation is via "install", which also depends
upon "all".
An alternative approach would be to harden the emit_tests target so that
it can depend upon "all", but that's a lot more complicated and hard to
get right, and doesn't seem worth it, especially given that emit_tests
should probably not be overridden at all.
[1] https://lore.kernel.org/20230710-kselftest-fix-arm64-v1-1-48e872844f25@kernel.org
Fixes: 9fc96c7c19 ("selftests: error out if kernel header files are not yet built")
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The riscv selftests (which were modeled after the arm64 selftests) are
improperly declaring the "emit_tests" target to depend upon the "all"
target. This approach, when combined with commit 9fc96c7c19
("selftests: error out if kernel header files are not yet built"), has
caused build failures [1] on arm64, and is likely to cause similar
failures for riscv.
To fix this, simply remove the unnecessary "all" dependency from the
emit_tests target. The dependency is still effectively honored, because
again, invocation is via "install", which also depends upon "all".
An alternative approach would be to harden the emit_tests target so that
it can depend upon "all", but that's a lot more complicated and hard to
get right, and doesn't seem worth it, especially given that emit_tests
should probably not be overridden at all.
[1] https://lore.kernel.org/20230710-kselftest-fix-arm64-v1-1-48e872844f25@kernel.org
Fixes: 9fc96c7c19 ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull RISC-V fixes from Palmer Dabbelt:
- fix a formatting error in the hwprobe documentation
- fix a spurious warning in the RISC-V PMU driver
- fix memory detection on rv32 (problem does not manifest on any known
system)
- avoid parsing legacy parsing of I in ACPI ISA strings
* tag 'riscv-for-linus-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Don't include Zicsr or Zifencei in I from ACPI
riscv: mm: fix truncation warning on RV32
perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()
Documentation: RISC-V: hwprobe: Fix a formatting error
Pull power management fixes from Rafael Wysocki:
"These fix hibernation (after recent changes), frequency QoS and the
sparc cpufreq driver.
Specifics:
- Unbreak the /sys/power/resume interface after recent changes (Azat
Khuzhin).
- Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
Yang).
- Remove __init from cpufreq callbacks in the sparc driver, because
they may be called after initialization too (Viresh Kumar)"
* tag 'pm-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: sparc: Don't mark cpufreq callbacks with __init
PM: QoS: Restore support for default value on frequency QoS
PM: hibernate: Fix writing maj:min to /sys/power/resume
Merge a PM QoS fix and a hibernation fix for 6.5-rc2.
- Unbreak the /sys/power/resume interface after recent changes (Azat
Khuzhin).
- Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
Yang).
* pm-sleep:
PM: hibernate: Fix writing maj:min to /sys/power/resume
* pm-qos:
PM: QoS: Restore support for default value on frequency QoS
The current code assumes that the CSC3551(multiple cs35l41) always have
its interrupt pin connected to GPIO thus the IRQ can be acquired with
acpi_dev_gpio_irq_get. However on some newer laptop models this is no
longer the case as they have the CSC3551's interrupt pin connected to
APIC. This causes smi_i2c_probe to fail on these machines.
To support these machines, a new macro IRQ_RESOURCE_AUTO was introduced
for cs35l41 smi_node, and smi_get_irq function was modified so it tries
to get GPIO irq resource first and if failed, tries to get
APIC irq resource for cs35l41.
This patch affects only the cs35l41's probing and brings no negative
influence on machines that indeed have the cs35l41's interrupt pin
connected to GPIO.
Signed-off-by: David Xu <xuwd1@hotmail.com>
Link: https://lore.kernel.org/r/SY4P282MB18350CD8288687B87FFD2243E037A@SY4P282MB1835.AUSP282.PROD.OUTLOOK.COM
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since commit 6624e780a5 ("ice: split ice_vsi_setup into smaller
functions") ice_vsi_release does things twice. There is unregister
netdev which is unregistered in ice_deinit_eth also.
It also unregisters the devlink_port twice which is also unregistered
in ice_deinit_eth(). This double deregistration is hidden because
devl_port_unregister ignores the return value of xa_erase.
[ 68.642167] Call Trace:
[ 68.650385] ice_devlink_destroy_pf_port+0xe/0x20 [ice]
[ 68.655656] ice_vsi_release+0x445/0x690 [ice]
[ 68.660147] ice_deinit+0x99/0x280 [ice]
[ 68.664117] ice_remove+0x1b6/0x5c0 [ice]
[ 171.103841] Call Trace:
[ 171.109607] ice_devlink_destroy_pf_port+0xf/0x20 [ice]
[ 171.114841] ice_remove+0x158/0x270 [ice]
[ 171.118854] pci_device_remove+0x3b/0xc0
[ 171.122779] device_release_driver_internal+0xc7/0x170
[ 171.127912] driver_detach+0x54/0x8c
[ 171.131491] bus_remove_driver+0x77/0xd1
[ 171.135406] pci_unregister_driver+0x2d/0xb0
[ 171.139670] ice_module_exit+0xc/0x55f [ice]
Fixes: 6624e780a5 ("ice: split ice_vsi_setup into smaller functions")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the number of responses with status of STATUS_IO_TIMEOUT
exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect
the connection. But we do not return the mid, or the credits
returned for the mid, or reduce the number of in-flight requests.
This bug could result in the server->in_flight count to go bad,
and also cause a leak in the mids.
This change moves the check to a few lines below where the
response is decrypted, even of the response is read from the
transform header. This way, the code for returning the mids
can be reused.
Also, the cifs_reconnect was reconnecting just the transport
connection before. In case of multi-channel, this may not be
what we want to do after several timeouts. Changed that to
reconnect the session and the tree too.
Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name
MAX_STATUS_IO_TIMEOUT.
Fixes: 8e670f77c4 ("Handle STATUS_IO_TIMEOUT gracefully")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, is_network_name_deleted and it's implementations
do not return anything if the network name did get deleted.
So the function doesn't fully achieve what it advertizes.
Changed the function to return a bool instead. It will now
return true if the error returned is STATUS_NETWORK_NAME_DELETED
and the share (tree id) was found to be connected. It returns
false otherwise.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull drm fixes from Dave Airlie:
"There were a bunch of fixes lined up for 2 weeks, so we have quite a
few scattered fixes, mostly amdgpu and i915, but ttm has a bunch and
nouveau makes an appearance.
So a bit busier than usual for rc2, but nothing seems out of the
ordinary.
fbdev:
- dma: Fix documented default preferred_bpp value
ttm:
- fix warning that we shouldn't mix && and ||
- never consider pinned BOs for eviction&swap
- Don't leak a resource on eviction error
- Don't leak a resource on swapout move error
- fix bulk_move corruption when adding a entry
client:
- Send hotplug event after registering a client
dma-buf:
- keep the signaling time of merged fences v3
- fix an error pointer vs NULL bug
sched:
- wait for all deps in kill jobs
- call set fence parent from scheduled
i915:
- Don't preserve dpll_hw_state for slave crtc in Bigjoiner
- Consider OA buffer boundary when zeroing out reports
- Remove dead code from gen8_pte_encode
- Fix one wrong caching mode enum usage
amdgpu:
- SMU i2c locking fix
- Fix a possible deadlock in process restoration for ROCm apps
- Disable PCIe lane/speed switching on Intel platforms (the platforms
don't support it)
nouveau:
- disp: fix HDMI on gt215+
- disp/g94: enable HDMI
- acr: Abort loading ACR if no firmware was found
- bring back blit subchannel for pre nv50 GPUs
- Fix drm_dp_remove_payload() invocation
ivpu:
- Fix VPU register access in irq disable
- Clear specific interrupt status bits on C0
bridge:
- dw_hdmi: fix connector access for scdc
- ti-sn65dsi86: Fix auxiliary bus lifetime
panel:
- simple: Add connector_type for innolux_at043tn24
- simple: Add Powertip PH800480T013 drm_display_mode flags"
* tag 'drm-fixes-2023-07-14-1' of git://anongit.freedesktop.org/drm/drm: (32 commits)
drm/nouveau: bring back blit subchannel for pre nv50 GPUs
drm/nouveau/acr: Abort loading ACR if no firmware was found
drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13
drm/amd: Move helper for dynamic speed switch check out of smu13
drm/amd/pm: conditionally disable pcie lane/speed switching for SMU13
drm/amd/pm: share the code around SMU13 pcie parameters update
drm/amdgpu: avoid restore process run into dead loop.
drm/amd/pm: fix smu i2c data read risk
drm/nouveau/disp/g94: enable HDMI
drm/nouveau/disp: fix HDMI on gt215+
drm/client: Send hotplug event after registering a client
drm/i915: Fix one wrong caching mode enum usage
drm/i915: Remove dead code from gen8_pte_encode
drm/i915/perf: Consider OA buffer boundary when zeroing out reports
drm/i915: Don't preserve dpll_hw_state for slave crtc in Bigjoiner
drm/ttm: never consider pinned BOs for eviction&swap
drm/fbdev-dma: Fix documented default preferred_bpp value
dma-buf: fix an error pointer vs NULL bug
accel/ivpu: Clear specific interrupt status bits on C0
accel/ivpu: Fix VPU register access in irq disable
...
Pull ceph fix from Ilya Dryomov:
"A fix to prevent a potential buffer overrun in the messenger, marked
for stable"
* tag 'ceph-for-6.5-rc2' of https://github.com/ceph/ceph-client:
libceph: harden msgr2.1 frame segment length checks
Copy the bounds checking from encode_message() to decode_message().
This patch addresses the following concerns. Ensure that there is
enough space for at least one header so that we don't have a negative
size later.
if (msg_hdr_len < sizeof(*trans_hdr))
Ensure that we have enough space to read the next header from the
msg->data.
if (msg_len > msg_hdr_len - sizeof(*trans_hdr))
return -EINVAL;
Check that the trans_hdr->len is not below the minimum size:
if (hdr_len < sizeof(*trans_hdr))
This minimum check ensures that we don't corrupt memory in
decode_passthrough() when we do.
memcpy(out_trans->data, in_trans->data, len - sizeof(in_trans->hdr));
And finally, use size_add() to prevent an integer overflow:
if (size_add(msg_len, hdr_len) > msg_hdr_len)
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: stable@vger.kernel.org # 6.4.x
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK0Q5nbLyDO7kJa+@moroto
There are several issues in this code. The check at the start of the
loop:
if (user_len >= user_msg->len) {
This check does not ensure that we have enough space for the trans_hdr
(8 bytes). Instead the check needs to be:
if (user_len > user_msg->len - sizeof(*trans_hdr)) {
That subtraction is done as an unsigned long we want to avoid
negatives. Add a lower bound to the start of the function.
if (user_msg->len < sizeof(*trans_hdr))
There is a second integer underflow which can happen if
trans_hdr->len is zero inside the encode_passthrough() function.
memcpy(out_trans->data, in_trans->data, in_trans->hdr.len - sizeof(in_trans->hdr));
Instead of adding a check to encode_passthrough() it's better to check
in this central place. Add that check:
if (trans_hdr->len < sizeof(trans_hdr)
The final concern is that the "user_len + trans_hdr->len" might have an
integer overflow bug. Use size_add() to prevent that.
- if (user_len + trans_hdr->len > user_msg->len) {
+ if (size_add(user_len, trans_hdr->len) > user_msg->len) {
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: stable@vger.kernel.org # 6.4.x
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9a0cb0c1-a974-4f10-bc8d-94437983639a@moroto.mountain
Muxed (mem) regions will wait in request_mem_region_muxed() if the region
is busy (in use by another consumer) during the call.
In order to wake-up possibly waiting other consumers of the region,
it must be released by a release_mem_region() call, which will actually
wake up any waiters.
release_mem_region() also frees the resource created by
request_mem_region_muxed(), avoiding the need for the unmatched kfree().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230711095920.264308-1-hdegoede@redhat.com
We used to insert the data commands following a pre-flush to the head
of the queue until commit 1e82fadfc6 ("blk-mq: do not do head insertions
post-pre-flush commands"). Not doing this seems to cause hangs of
such commands on NFS workloads when exported from file systems with
SATA SSDs. I have no idea why this would starve these workloads,
but doing a semantic revert of this patch (which looks quite different
due to various other changes) fixes the hangs.
Fixes: 1e82fadfc6 ("blk-mq: do not do head insertions post-pre-flush commands")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230714143014.11879-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To get the changes in:
e910baa9c1 ("KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations")
That makes this perf source code to be rebuilt:
CC /tmp/build/perf-tools/util/arm-spe.o
The changes in the above patch don't affect things that are used in
arm-spe.c (things like MIDR_NEOVERSE_N1, etc). Unsure if Apple M2 has
SPE (Statistical Profiling Extension) :-)
That addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
