[ Upstream commit d3d6b1bf85 ]
Cheap monitors sometimes advertise YUV modes they don't really have
(HDMI specification mandates YUV support so even monitors without actual
support will often wrongfully advertise it) which results in YUV matches
and user forum complaints of a red tint to light colour display areas in
common desktop environments.
Moving the default RGB fall-back before YUV selection results in RGB
mode matching in most cases, reducing complaints.
Fixes: 6c3c719936 ("drm/bridge: synopsys: dw-hdmi: add bus format negociation")
Signed-off-by: Guillaume BRUN <the.cheaterman@gmail.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116143523.2126-1-the.cheaterman@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c11586450 ]
According to the description in ti-sn65dsi86's datasheet:
CHA_HSYNC_POLARITY:
0 = Active High Pulse. Synchronization signal is high for the sync
pulse width. (default)
1 = Active Low Pulse. Synchronization signal is low for the sync
pulse width.
CHA_VSYNC_POLARITY:
0 = Active High Pulse. Synchronization signal is high for the sync
pulse width. (Default)
1 = Active Low Pulse. Synchronization signal is low for the sync
pulse width.
We should only set these bits when the polarity is negative.
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Qiqi Zhang <eddy.zhang@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125104558.84616-1-eddy.zhang@rock-chips.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6e90293618 upstream.
When SEV is enabled gmr's and mob's are explicitly disabled because
the encrypted system memory can not be used by the hypervisor.
The driver was disabling GMR's but the presentation code, which depends
on GMR's, wasn't honoring it which lead to black screen on hosts
with SEV enabled.
Make sure screen objects presentation is not used when guest memory
regions have been disabled to fix presentation on SEV enabled hosts.
Fixes: 3b0d6458c7 ("drm/vmwgfx: Refuse DMA operation when SEV encryption is active")
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reported-by: Nicholas Hunt <nhunt@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201175341.491884-1-zack@kde.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12b8b046e4 upstream.
Users of intel_gt_retire_requests_timeout() expect 0 return value on
success. However, we have no protection from passing back 0 potentially
returned by a call to dma_fence_wait_timeout() when it succedes right
after its timeout has expired.
Replace 0 with -ETIME before potentially using the timeout value as return
code, so -ETIME is returned if there are still some requests not retired
after timeout, 0 otherwise.
v3: Use conditional expression, more compact but also better reflecting
intention standing behind the change.
v2: Move the added lines down so flush_submission() is not affected.
Fixes: f33a8a5160 ("drm/i915: Merge wait_for_timelines with retire_request")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121145655.75141-3-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f301a29f14)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 20543be93c ]
drm_display_info is updated by drm_get_edid() or
drm_connector_update_edid_property(). In the amdgpu driver it is almost
always updated when the edid is read in amdgpu_connector_get_edid(),
but not always. Change amdgpu_connector_get_edid() and
amdgpu_connector_free_edid() to keep drm_display_info updated.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Claudio Suarez <cssk@net-c.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 602ad43c3c ("drm/amdgpu: Partially revert "drm/amdgpu: update drm_display_info correctly when the edid is read"")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f3a127386 ]
Looks like that we're accidentally dropping a pretty important return code
here. For some reason, we just return -EINVAL if we fail to get the MST
topology state. This is wrong: error codes are important and should never
be squashed without being handled, which here seems to have the potential
to cause a deadlock.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Fixes: 8ec046716c ("drm/dp_mst: Add helper to trigger modeset on affected DSC MST CRTCs")
Cc: <stable@vger.kernel.org> # v5.6+
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 44035ec2fd upstream.
There's been a very long running bug that seems to have been neglected for
a while, where amdgpu consistently triggers a KASAN error at start:
BUG: KASAN: global-out-of-bounds in read_indirect_azalia_reg+0x1d4/0x2a0 [amdgpu]
Read of size 4 at addr ffffffffc2274b28 by task modprobe/1889
After digging through amd's rather creative method for accessing registers,
I eventually discovered the problem likely has to do with the fact that on
my dce120 GPU there are supposedly 7 sets of audio registers. But we only
define a register mapping for 6 sets.
So, fix this and fix the KASAN warning finally.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c2418f911a ]
Since commit c7e3ca515e ("iommu/tegra: gart: Do not register with
bus") quite some time ago, the GART driver has effectively disabled
itself to avoid issues with the GPU driver expecting it to work in ways
that it doesn't. As of commit 57365a04c9 ("iommu: Move bus setup to
IOMMU device registration") that bodge no longer works, but really the
GPU driver should be responsible for its own behaviour anyway. Make the
workaround explicit.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Suggested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5954acbacb ]
Current dual mode adaptor ("DP++") detection code assumes that all
adaptors support i2c sub-addressing for read operations from the
DP-HDMI adaptor ID buffer. It has been observed that multiple
adaptors do not in fact support this, and always return data starting
at register 0. On affected adaptors, the code fails to read the proper
registers that would identify the device as a type 2 adaptor, and
handles those as type 1, limiting the TMDS clock to 165MHz, even if
the according register would announce a higher TMDS clock.
Fix this by always reading the ID buffer starting from offset 0, and
discarding any bytes before the actual offset of interest.
We tried finding authoritative documentation on whether or not this is
allowed behaviour, but since all the official VESA docs are paywalled,
the best we could come up with was the spec sheet for Texas Instruments'
SNx5DP149 chip family.[1] It explicitly mentions that sub-addressing is
supported for register writes, but *not* for reads (See NOTE in
section 8.5.3). Unless TI openly decided to violate the VESA spec, one
could take that as a hint that sub-addressing is in fact not mandated
by VESA.
The other two adaptors affected used the PS8409(A) and the LT8611,
according to the data returned from their ID buffers.
[1] https://www.ti.com/lit/ds/symlink/sn75dp149.pdf
Cc: stable@vger.kernel.org
Signed-off-by: Simon Rettberg <simon.rettberg@rz.uni-freiburg.de>
Reviewed-by: Rafael Gieschke <rafael.gieschke@rz.uni-freiburg.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006113314.41101987@computer
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 458020dd4f ]
Avoid reading BIF STRAP each time for BACO capability. Read the STRAP
value while checking BACO capability in PPTable.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 0c85c067c9 ("drm/amdgpu: disable BACO on special BEIGE_GOBY card")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca08a1725d ]
When using a device based on DCN32/321,
we have an issue where a second
4k@60Hz display does not light up,
and the system becomes unresponsive
for a few minutes. In the debug process,
it was possible to see a hang
in the function dcn20_post_unlock_program_front_end
in this part:
for (j = 0; j < TIMEOUT_FOR_PIPE_ENABLE_MS*1000
&& hubp->funcs->hubp_is_flip_pending(hubp); j++)
mdelay(1);
}
The hubp_is_flip_pending always returns positive
for waiting pending flips which is a symptom of
pipe hang. Additionally, the dmesg log shows
this message after a few minutes:
BUG: soft lockup - CPU#4 stuck for 26s!
...
[ +0.000003] dcn20_post_unlock_program_front_end+0x112/0x340 [amdgpu]
[ +0.000171] dc_commit_state_no_check+0x63d/0xbf0 [amdgpu]
[ +0.000155] ? dc_validate_global_state+0x358/0x3d0 [amdgpu]
[ +0.000154] dc_commit_state+0xe2/0xf0 [amdgpu]
This confirmed the hypothesis that we had a pipe
hanging somewhere. Next, after checking the
ftrace entries, we have the below weird
sequence:
[..]
2) | dcn10_lock_all_pipes [amdgpu]() {
2) 0.120 us | optc1_is_tg_enabled [amdgpu]();
2) | dcn20_pipe_control_lock [amdgpu]() {
2) | dc_dmub_srv_clear_inbox0_ack [amdgpu]() {
2) 0.121 us | amdgpu_dm_dmub_reg_write [amdgpu]();
2) 0.551 us | }
2) | dc_dmub_srv_send_inbox0_cmd [amdgpu]() {
2) 0.110 us | amdgpu_dm_dmub_reg_write [amdgpu]();
2) 0.511 us | }
2) | dc_dmub_srv_wait_for_inbox0_ack [amdgpu]() {
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
[..]
We are not expected to read from dmub register
so many times and for so long. From the trace log,
it was possible to identify that the function
dcn20_pipe_control_lock was triggering the dmub
operation when it was unnecessary and causing
the hang issue. This commit drops the unnecessary
dmub code and, consequently, fixes the second display not
lighting up the issue.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf53db768a ]
A problem about modprobe vc4 failed is triggered with the following log
given:
[ 420.327987] Error: Driver 'vc4_hvs' is already registered, aborting...
[ 420.333904] failed to register platform driver vc4_hvs_driver [vc4]: -16
modprobe: ERROR: could not insert 'vc4': Device or resource busy
The reason is that vc4_drm_register() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
fails, it returns without unregistering all the vc4 drivers, resulting the
vc4 can never be installed later.
A simple call graph is shown as below:
vc4_drm_register()
platform_register_drivers() # all vc4 drivers are registered
platform_driver_register()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without unregister drivers
Fixing this problem by checking the return value of
platform_driver_register() and do platform_unregister_drivers() if
error happened.
Fixes: c8b75bca92 ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103014705.109322-1-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65f8682b9a ]
For asic with VF MMIO access protection avoid using CPU for VM table updates.
CPU pagetable updates have issues with HDP flush as VF MMIO access protection
blocks write to mmBIF_BX_DEV0_EPF0_VF0_HDP_MEM_COHERENCY_FLUSH_CNTL register
during sriov runtime.
v3: introduce virtualization capability flag AMDGPU_VF_MMIO_ACCESS_PROTECT
which indicates that VF MMIO write access is not allowed in sriov runtime
Signed-off-by: Danijel Slivka <danijel.slivka@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 088604d37e ]
Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts
which need to keep the irq line disabled until the threaded handler has
been run.". When applied to an interrupt that doesn't request a threaded
irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect,
which it to disable the forced threading of irqs. For "normal" kernels
if there is no thread_fn then IRQF_ONESHOT is a nop.
In this case disabling forced threading is not appropriate because the
driver calls wake_up_all() (via msm_hdmi_i2c_irq) and also directly uses
the regular spinlock API for locking (in msm_hdmi_hdcp_irq() ). Neither
of these APIs can be called from no-thread interrupt handlers on
PREEMPT_RT systems.
Fix this by removing IRQF_ONESHOT.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220201174734.196718-3-daniel.thompson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Stable-dep-of: 152d394842 ("drm/msm/hdmi: fix IRQ lifetime")
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 867b2b2b68 which is
commit 66f99628eb upstream.
With this commit, dmesg fills up with the following messages and drm
initialization takes a very long time. This commit has bee reverted
from 5.4
[drm] Fence fallback timer expired on ring sdma0
[drm] Fence fallback timer expired on ring gfx
[drm] Fence fallback timer expired on ring sdma0
[drm] Fence fallback timer expired on ring gfx
[drm] Fence fallback timer expired on ring sdma0
[drm] Fence fallback timer expired on ring sdma0
[drm] Fence fallback timer expired on ring sdma0
[drm] Fence fallback timer expired on ring gfx
Cc: <stable@vger.kernel.org> # 5.10
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 9f55f36f74 which is
commit e3163bc8ff upstream.
This commit causes repeated WARN_ONs from
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amd
gpu_dm.c:7391 amdgpu_dm_atomic_commit_tail+0x23b9/0x2430 [amdgpu]
dmesg fills up with the following messages and drm initialization takes
a very long time.
Cc: <stable@vger.kernel.org> # 5.10
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 97d8d6f075 ]
[why]
Only a single VLINE interrupt is available so interface should not
expose the second one which is used by DMU firmware.
[how]
Remove references to periodic_interrupt1 and VLINE1 from DC interfaces.
Reviewed-by: Jaehyun Chung <jaehyun.chung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b4d8db657 ]
The sequence for Source DP PHY CTS automation is [2][1]:
1- Emulate successful Link Training(LT)
2- Short HPD and change link rates and number of lanes by LT.
(This is same flow for Link Layer CTS)
3- Short HPD and change PHY test pattern and swing/pre-emphasis
levels (This step should not trigger LT)
The problem is with DP PHY compliance setup as follow:
[DPTX + on board LTTPR]------Main Link--->[Scope]
^ |
| |
| |
----------Aux Ch------>[Aux Emulator]
At step 3, before writing TRAINING_LANEx_SET/LINK_QUAL_PATTERN_SET
to declare the pattern/swing requested by scope, we write link
config in LINK_BW_SET/LANE_COUNT_SET on a port that has LTTPR.
As LTTPR snoops aux transaction, LINK_BW_SET/LANE_COUNT_SET writes
indicate a LT will start [Check DP 2.0 E11 -Sec 3.6.8.2 & 3.6.8.6.3],
and LTTPR will reset the link and stop sending DP signals to
DPTX/Scope causing the measurements to fail. Note that step 3 will
not trigger LT and DP link will never recovered by the
Aux Emulator/Scope.
The reset of link can be tested with a monitor connected to LTTPR
port simply by writing to LINK_BW_SET or LANE_COUNT_SET as follow
igt/tools/dpcd_reg write --offset=0x100 --value 0x14 --device=2
OR
printf '\x14' | sudo dd of=/dev/drm_dp_aux2 bs=1 count=1 conv=notrunc
seek=$((0x100))
This single aux write causes the screen to blank, sending short HPD to
DPTX, setting LINK_STATUS_UPDATE = 1 in DPCD 0x204, and triggering LT.
As stated in [1]:
"Before any TX electrical testing can be performed, the link between a
DPTX and DPRX (in this case, a piece of test equipment), including all
LTTPRs within the path, shall be trained as defined in this Standard."
In addition, changing Phy pattern/Swing/Pre-emphasis (Step 3) uses the
same link rate and lane count applied on step 2, so no need to redo LT.
The fix is to not rewrite link config in step 3, and just writes
TRAINING_LANEx_SET and LINK_QUAL_PATTERN_SET
[1]: DP 2.0 E11 - 3.6.11.1 LTTPR DPTX_PHY Electrical Compliance
[2]: Configuring UnigrafDPTC Controller - Automation Test Sequence
https://www.keysight.com/us/en/assets/9922-01244/help-files/
D9040DPPC-DisplayPort-Test-Software-Online-Help-latest.chm
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Or Cochvi <or.cochvi@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916054900.415804-1-khaled.almahallawy@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da09daf881 ]
There are two events that signal a real change of the link state: HPD going
high means the sink is newly connected or wants the source to re-read the
EDID, RX sense going low is a indication that the link has been disconnected.
Ignore the other two events that also trigger interrupts, but don't need
immediate attention: HPD going low does not necessarily mean the link has
been lost and should not trigger a immediate read of the status. RX sense
going high also does not require a detect cycle, as HPD going high is the
right point in time to read the EDID.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v1)
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826185733.3213248-1-l.stach@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ae0632d17 ]
The definition of MIN_I64 in bw_fixed.c can cause gcc to whinge about
integer overflow, because it is treated as a positive value, which is
then negated. The temporary positive value is not necessarily
representable.
This causes the following warning:
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/calcs/bw_fixed.c:30:19:
warning: integer overflow in expression ‘-9223372036854775808’ of type
‘long long int’ results in ‘-9223372036854775808’ [-Woverflow]
30 | (int64_t)(-(1LL << 63))
| ^
Writing out (-MAX_I64 - 1) works instead.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
