"howaboutsynergy" reported via kernel buzilla number 204165 that
compact_zone_order was consuming 100% CPU during a stress test for
prolonged periods of time. Specifically the following command, which
should exit in 10 seconds, was taking an excessive time to finish while
the CPU was pegged at 100%.
stress -m 220 --vm-bytes 1000000000 --timeout 10
Tracing indicated a pattern as follows
stress-3923 [007] 519.106208: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106212: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106216: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106219: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106223: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106227: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106231: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106235: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106238: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106242: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
Note that compaction is entered in rapid succession while scanning and
isolating nothing. The problem is that when a task that is compacting
receives a fatal signal, it retries indefinitely instead of exiting
while making no progress as a fatal signal is pending.
It's not easy to trigger this condition although enabling zswap helps on
the basis that the timing is altered. A very small window has to be hit
for the problem to occur (signal delivered while compacting and
isolating a PFN for migration that is not aligned to SWAP_CLUSTER_MAX).
This was reproduced locally -- 16G single socket system, 8G swap, 30%
zswap configured, vm-bytes 22000000000 using Colin Kings stress-ng
implementation from github running in a loop until the problem hits).
Tracing recorded the problem occurring almost 200K times in a short
window. With this patch, the problem hit 4 times but the task existed
normally instead of consuming CPU.
This problem has existed for some time but it was made worse by commit
cf66f0700c ("mm, compaction: do not consider a need to reschedule as
contention"). Before that commit, if the same condition was hit then
locks would be quickly contended and compaction would exit that way.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204165
Link: http://lkml.kernel.org/r/20190718085708.GE24383@techsingularity.net
Fixes: cf66f0700c ("mm, compaction: do not consider a need to reschedule as contention")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [5.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
buffer_migrate_page_norefs() can race with bh users in the following
way:
CPU1 CPU2
buffer_migrate_page_norefs()
buffer_migrate_lock_buffers()
checks bh refs
spin_unlock(&mapping->private_lock)
__find_get_block()
spin_lock(&mapping->private_lock)
grab bh ref
spin_unlock(&mapping->private_lock)
move page do bh work
This can result in various issues like lost updates to buffers (i.e.
metadata corruption) or use after free issues for the old page.
This patch closes the race by holding mapping->private_lock while the
mapping is being moved to a new page. Ordinarily, a reference can be
taken outside of the private_lock using the per-cpu BH LRU but the
references are checked and the LRU invalidated if necessary. The
private_lock is held once the references are known so the buffer lookup
slow path will spin on the private_lock. Between the page lock and
private_lock, it should be impossible for other references to be
acquired and updates to happen during the migration.
A user had reported data corruption issues on a distribution kernel with
a similar page migration implementation as mainline. The data
corruption could not be reproduced with this patch applied. A small
number of migration-intensive tests were run and no performance problems
were noted.
[mgorman@techsingularity.net: Changelog, removed tracing]
Link: http://lkml.kernel.org/r/20190718090238.GF24383@techsingularity.net
Fixes: 89cb0888ca "mm: migrate: provide buffer_migrate_page_norefs()"
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When running ltp's oom test with kmemleak enabled, the below warning was
triggerred since kernel detects __GFP_NOFAIL & ~__GFP_DIRECT_RECLAIM is
passed in:
WARNING: CPU: 105 PID: 2138 at mm/page_alloc.c:4608 __alloc_pages_nodemask+0x1c31/0x1d50
Modules linked in: loop dax_pmem dax_pmem_core ip_tables x_tables xfs virtio_net net_failover virtio_blk failover ata_generic virtio_pci virtio_ring virtio libata
CPU: 105 PID: 2138 Comm: oom01 Not tainted 5.2.0-next-20190710+ #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__alloc_pages_nodemask+0x1c31/0x1d50
...
kmemleak_alloc+0x4e/0xb0
kmem_cache_alloc+0x2a7/0x3e0
mempool_alloc_slab+0x2d/0x40
mempool_alloc+0x118/0x2b0
bio_alloc_bioset+0x19d/0x350
get_swap_bio+0x80/0x230
__swap_writepage+0x5ff/0xb20
The mempool_alloc_slab() clears __GFP_DIRECT_RECLAIM, however kmemleak
has __GFP_NOFAIL set all the time due to d9570ee3bd ("kmemleak:
allow to coexist with fault injection"). But, it doesn't make any sense
to have __GFP_NOFAIL and ~__GFP_DIRECT_RECLAIM specified at the same
time.
According to the discussion on the mailing list, the commit should be
reverted for short term solution. Catalin Marinas would follow up with
a better solution for longer term.
The failure rate of kmemleak metadata allocation may increase in some
circumstances, but this should be expected side effect.
Link: http://lkml.kernel.org/r/1563299431-111710-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: d9570ee3bd ("kmemleak: allow to coexist with fault injection")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[Why]
Before this change, the fan control state on smu_v11 was not able to be
changed because the capability check for checking if the fan control
capability existed was inverted.
[How]
The capability check for fan control in smu_v11_0_auto_fan_control was
inverted, to correctly check for the absence, instead of presence of fan
control capabilities.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Matt Coffin <mcoffin13@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull more drm fixes from Daniel Vetter:
"Dave sends his pull, everyone realizes they've been asleep at the
wheel and hits send on their own pulls :-/
Normally I'd just ignore these all because w/e for me and Dave. But
this time around the latecomers also included drm-intel-fixes, which
failed to send out a -fixes pull thus far for this release (screwed up
vacation coverage, despite that 2/3 maintainers were around ... they
all look appropriately guilty), and that really is overdue to get
landed.
And since I had to do a pull request anyway I pulled the other two
late ones too.
intel fixes (didn't have any ever since the main merge window pull):
- gvt fixes (2 cc: stable)
- fix gpu reset vs mm-shrinker vs wakeup fun (needed a few patches)
- two gem locking fixes (one cc: stable)
- pile of misc fixes all over with minor impact, 6 cc: stable, others
from this window
exynos:
- misc minor fixes
misc:
- some build/Kconfig fixes
- regression fix for vm scalability perf test which seems to mostly
exercise dmesg/console logging ...
- the vgem cache flush fix for arm64 broke the world on x86, so
that's reverted again
* tag 'drm-fixes-2019-08-02-1' of git://anongit.freedesktop.org/drm/drm: (42 commits)
Revert "drm/vgem: fix cache synchronization on arm/arm64"
drm/exynos: fix missing decrement of retry counter
drm/exynos: add CONFIG_MMU dependency
drm/exynos: remove redundant assignment to pointer 'node'
drm/exynos: using dev_get_drvdata directly
drm/bochs: Use shadow buffer for bochs framebuffer console
drm/fb-helper: Instanciate shadow FB if configured in device's mode_config
drm/fb-helper: Map DRM client buffer only when required
drm/client: Support unmapping of DRM client buffers
drm/i915: Only recover active engines
drm/i915: Add a wakeref getter for iff the wakeref is already active
drm/i915: Lift intel_engines_resume() to callers
drm/vgem: fix cache synchronization on arm/arm64
drm/i810: Use CONFIG_PREEMPTION
drm/bridge: tc358764: Fix build error
drm/bridge: lvds-encoder: Fix build error while CONFIG_DRM_KMS_HELPER=m
drm/i915/gvt: Adding ppgtt to GVT GEM context after shadow pdps settled.
drm/i915/gvt: grab runtime pm first for forcewake use
drm/i915/gvt: fix incorrect cache entry for guest page mapping
drm/i915/gvt: Checking workload's gma earlier
...
Pull selinux fix from Paul Moore:
"One more small fix for a potential memory leak in an error path"
* tag 'selinux-pr-20190801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix memory leak in policydb_init()
In phy_start_aneg() autoneg is started, and immediately after that
link and autoneg status are read. As reported in [0] it can happen that
at time of this read the PHY has reset the "aneg complete" bit but not
yet the "link up" bit, what can result in a false link-up detection.
To fix this don't report link as up if we're in aneg mode and PHY
doesn't signal "aneg complete".
[0] https://marc.info/?t=156413509900003&r=1&w=2
Fixes: 4950c2ba49 ("net: phy: fix autoneg mismatch case in genphy_read_status")
Reported-by: liuyonglong <liuyonglong@huawei.com>
Tested-by: liuyonglong <liuyonglong@huawei.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like FSL_ENETC, when CONFIG_FSL_ENETC_VF is set,
we should select PHYLIB, otherwise building still fails:
drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open':
enetc.c:(.text+0x2744): undefined reference to `phy_start'
enetc.c:(.text+0x282c): undefined reference to `phy_disconnect'
drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close':
enetc.c:(.text+0x28f8): undefined reference to `phy_stop'
enetc.c:(.text+0x2904): undefined reference to `phy_disconnect'
drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x3f8): undefined reference to `phy_ethtool_get_link_ksettings'
drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x400): undefined reference to `phy_ethtool_set_link_ksettings'
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d4fd0404c1 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
strncpy() does not ensure NULL-termination when the input string
size equals to the destination buffer size 30.
The output string is passed to qed_int_deassertion_aeu_bit()
which calls DP_INFO() and relies NULL-termination.
Use strlcpy instead. The other conditional branch above strncpy()
needs no fix as snprintf() ensures NULL-termination.
This issue is identified by a Coccinelle script.
Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
board is controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/atm/iphase.c:2765 ia_ioctl() warn: potential spectre issue 'ia_dev' [r] (local cap)
drivers/atm/iphase.c:2774 ia_ioctl() warn: possible spectre second half. 'iadev'
drivers/atm/iphase.c:2782 ia_ioctl() warn: possible spectre second half. 'iadev'
drivers/atm/iphase.c:2816 ia_ioctl() warn: possible spectre second half. 'iadev'
drivers/atm/iphase.c:2823 ia_ioctl() warn: possible spectre second half. 'iadev'
drivers/atm/iphase.c:2830 ia_ioctl() warn: potential spectre issue '_ia_dev' [r] (local cap)
drivers/atm/iphase.c:2845 ia_ioctl() warn: possible spectre second half. 'iadev'
drivers/atm/iphase.c:2856 ia_ioctl() warn: possible spectre second half. 'iadev'
Fix this by sanitizing board before using it to index ia_dev and _ia_dev
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a race condition for an established connection that is being closed
by the guest: the refcnt is 4 at the end of hvs_release() (Note: here the
'remove_sock' is false):
1 for the initial value;
1 for the sk being in the bound list;
1 for the sk being in the connected list;
1 for the delayed close_work.
After hvs_release() finishes, __vsock_release() -> sock_put(sk) *may*
decrease the refcnt to 3.
Concurrently, hvs_close_connection() runs in another thread:
calls vsock_remove_sock() to decrease the refcnt by 2;
call sock_put() to decrease the refcnt to 0, and free the sk;
next, the "release_sock(sk)" may hang due to use-after-free.
In the above, after hvs_release() finishes, if hvs_close_connection() runs
faster than "__vsock_release() -> sock_put(sk)", then there is not any issue,
because at the beginning of hvs_close_connection(), the refcnt is still 4.
The issue can be resolved if an extra reference is taken when the
connection is established.
Fixes: a9eeb998c2 ("hv_sock: Add support for delayed close")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hbmc-am654 driver is for the TI AM654, which is an ARM64 SoC, so
don't propose this driver on other architectures unless
build-testing.
Fixes: b07079f164 ("mtd: hyperbus: Add driver for TI's HyperBus memory controller")
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
On x86_64, when CONFIG_OF is not disabled:
WARNING: unmet direct dependencies detected for MUX_MMIO
Depends on [n]: MULTIPLEXER [=y] && (OF [=n] || COMPILE_TEST [=n])
Selected by [y]:
- HBMC_AM654 [=y] && MTD [=y] && MTD_HYPERBUS [=y]
due to
config HBMC_AM654
tristate "HyperBus controller driver for AM65x SoC"
select MULTIPLEXER
select MUX_MMIO
Fix this by making HBMC_AM654 imply MUX_MMIO instead of select so
that dependencies are taken care of. MUX_MMIO is optional for
functioning of driver.
Fixes: b07079f164 ("mtd: hyperbus: Add driver for TI's HyperBus memory controller")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Some devices are not supposed to support on-die ECC but experience
shows that internal ECC machinery can actually be enabled through the
"SET FEATURE (EFh)" command, even if a read of the "READ ID Parameter
Tables" returns that it is not.
Currently, the driver checks the "READ ID Parameter" field directly
after having enabled the feature. If the check fails it returns
immediately but leaves the ECC on. When using buggy chips like
MT29F2G08ABAGA and MT29F2G08ABBGA, all future read/program cycles will
go through the on-die ECC, confusing the host controller which is
supposed to be the one handling correction.
To address this in a common way we need to turn off the on-die ECC
directly after reading the "READ ID Parameter" and before checking the
"ECC status".
Cc: stable@vger.kernel.org
Fixes: dbc44edbf8 ("mtd: rawnand: micron: Fix on-die ECC detection logic")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Pull xen fixes from Juergen Gross:
- a small cleanup
- a fix for a build error on ARM with some configs
- a fix of a patch for the Xen gntdev driver
- three patches for fixing a potential problem in the swiotlb-xen
driver which Konrad was fine with me carrying them through the Xen
tree
* tag 'for-linus-5.3a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/swiotlb: remember having called xen_create_contiguous_region()
xen/swiotlb: simplify range_straddles_page_boundary()
xen/swiotlb: fix condition for calling xen_destroy_contiguous_region()
xen: avoid link error on ARM
xen/gntdev.c: Replace vm_map_pages() with vm_map_pages_zero()
xen/pciback: remove set but not used variable 'old_state'
Pull arm64 fixes from Catalin Marinas:
- Update the compat layer to allow single-byte watchpoints on all
addresses (similar to the native support)
- arm_pmu: fix the restoration of the counters on the
CPU_PM_ENTER_FAILED path
- Fix build regression with vDSO and Makefile not stripping
CROSS_COMPILE_COMPAT
- Fix the CTR_EL0 (cache type register) sanitisation on heterogeneous
machines (e.g. big.LITTLE)
- Fix the interrupt controller priority mask value when pseudo-NMIs are
enabled
- arm64 kprobes fixes: recovering of the PSTATE.D flag in the
single-step exception handler, NOKPROBE annotations for
unwind_frame() and walk_stackframe(), remove unneeded
rcu_read_lock/unlock from debug handlers
- Several gcc fall-through warnings
- Unused variable warnings
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Make debug exception handlers visible from RCU
arm64: kprobes: Recover pstate.D in single-step exception handler
arm64/mm: fix variable 'tag' set but not used
arm64/mm: fix variable 'pud' set but not used
arm64: Remove unneeded rcu_read_lock from debug handlers
arm64: unwind: Prohibit probing on return_address()
arm64: Lower priority mask for GIC_PRIO_IRQON
arm64/efi: fix variable 'si' set but not used
arm64: cpufeature: Fix feature comparison for CTR_EL0.{CWG,ERG}
arm64: vdso: Fix Makefile regression
arm64: module: Mark expected switch fall-through
arm64: smp: Mark expected switch fall-through
arm64: hw_breakpoint: Fix warnings about implicit fallthrough
drivers/perf: arm_pmu: Fix failure path in PM notifier
arm64: compat: Allow single-byte watchpoints on all addresses
Pull parisc fixes from Helge Deller:
"A few small fixes for the parisc architecture:
- Fix fall-through warnings in parisc math emu code
- Fix vmlinuz linking failure with debug-enabled kernels
- Fix a race condition in kernel live-patching code
- Add missing archclean Makefile target & defconfig adjustments"
* 'parisc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Add archclean Makefile target
parisc: Strip debug info from kernel before creating compressed vmlinuz
parisc: Fix build of compressed kernel even with debug enabled
parisc: fix race condition in patching code
parisc: rename default_defconfig to defconfig
parisc: Fix fall-through warnings in fpudispatch.c
parisc: Mark expected switch fall-throughs in fault.c
Pull s390 updates from Vasily Gorbik:
- Default configs updates
- Minor qdio cleanup
- Sparse warnings fixes
- Implicit-fallthrough warnings fixes
* tag 's390-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: adjust switch fall through comments for -Wimplicit-fallthrough
vfio-ccw: make vfio_ccw_async_region_ops static
s390/3215: add switch fall through comment for -Wimplicit-fallthrough
s390/tape: add fallthrough annotations
s390/mm: add fallthrough annotations
s390/mm: make gmap_test_and_clear_dirty_pmd static
s390/kexec: add missing include to machine_kexec_reloc.c
s390/perf: make cf_diag_csd static
s390/lib: add missing include
s390/boot: add missing declarations and includes
s390: update configs
s390: clean up qdio.h
Pull SCSI fixes from James Bottomley:
"Seven fixes to four drivers with no core changes.
The mpt3sas one is theoretical until we get a CPU that goes up to 64
bits physical, the qla2xxx one fixes an oops in a driver
initialization error leg and the others are mostly cosmetic"
[ The fcoe patches may be worth highlighting - they may be "just"
cleanups, but they simplify and fix the odd fc_rport_priv structure
handling rules so that the new gcc-9 warnings about memset crossing
structure boundaries are gone.
The old code was hard for humans to understand too, and really
confused the compiler sanity checks - Linus ]
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix possible fcport null-pointer dereferences
scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA
scsi: hpsa: remove printing internal cdb on tag collision
scsi: hpsa: correct scsi command status issue after reset
scsi: fcoe: pass in fcoe_rport structure instead of fc_rport_priv
scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure
scsi: libfc: Whitespace cleanup in libfc.h
Pull block fixes from Jens Axboe:
"Here's a small collection of fixes that should go into this series.
This contains:
- io_uring potential use-after-free fix (Jackie)
- loop regression fix (Jan)
- O_DIRECT fragmented bio regression fix (Damien)
- Mark Denis as the new floppy maintainer (Denis)
- ataflop switch fall-through annotation (Gustavo)
- libata zpodd overflow fix (Kees)
- libata ahci deferred probe fix (Miquel)
- nbd invalidation BUG_ON() fix (Munehisa)
- dasd endless loop fix (Stefan)"
* tag 'for-linus-20190802' of git://git.kernel.dk/linux-block:
s390/dasd: fix endless loop after read unit address configuration
block: Fix __blkdev_direct_IO() for bio fragments
MAINTAINERS: floppy: take over maintainership
nbd: replace kill_bdev() with __invalidate_device() again
ata: libahci: do not complain in case of deferred probe
io_uring: fix KASAN use after free in io_sq_wq_submit_work
loop: Fix mount(2) failure due to race with LOOP_SET_FD
libata: zpodd: Fix small read overflow in zpodd_get_mech_type()
ataflop: Mark expected switch fall-through
Pull device mapper fixes from Mike Snitzer:
"Fix NULL pointer and various whitespace issues with DM's recent DAX
code changes from commit in 5.3 merge"
* tag 'for-5.3/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm table: fix various whitespace issues with recent DAX code
dm table: fix dax_dev NULL dereference in device_synchronous()
Pull rdma fixes from Doug Ledford:
"Here's our second -rc pull request. Nothing particularly special in
this one. The client removal deadlock fix is kindy tricky, but we had
multiple eyes on it and no one could find a fault in it. A couple
Spectre V1 fixes too. Otherwise, all just normal -rc fodder:
- A couple Spectre V1 fixes (umad, hfi1)
- Fix a tricky deadlock in the rdma core code with refcounting
instead of locks (client removal patches)
- Build errors (hns)
- Fix a scheduling while atomic issue (mlx5)
- Use after free fix (mad)
- Fix error path return code (hns)
- Null deref fix (siw_crypto_hash)
- A few other misc. minor fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Fix error return code in hns_roce_v1_rsv_lp_qp()
RDMA/mlx5: Release locks during notifier unregister
IB/hfi1: Fix Spectre v1 vulnerability
IB/mad: Fix use-after-free in ib mad completion handling
RDMA/restrack: Track driver QP types in resource tracker
IB/mlx5: Fix MR registration flow to use UMR properly
RDMA/devices: Remove the lock around remove_client_context
RDMA/devices: Do not deadlock during client removal
IB/core: Add mitigation for Spectre V1
Do not dereference 'siw_crypto_shash' before checking
RDMA/qedr: Fix the hca_type and hca_rev returned in device attributes
RDMA/hns: Fix build error
Pull btrfs fixes from David Sterba:
- tiny race window during 2 transactions aborting at the same time can
accidentally lead to a commit
- regression fix, possible deadlock during fiemap
- fix for an old bug when incremental send can fail on a file that has
been deduplicated in a special way
* tag 'for-5.3-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix deadlock between fiemap and transaction commits
Btrfs: fix race leading to fs corruption after transaction abort
Btrfs: fix incremental send failure after deduplication
We shouldn't assume CPU physical address we get from page_to_phys()
is same as DMA address we get from dma_alloc_coherent(). On x86_64,
we won't run into any problem with the assumption when dma_ops is
nommu_dma_ops. However, DMA address is IOVA when IOMMU is enabled.
And it's most likely different from CPU physical address when AMD
IOMMU is not in passthrough mode.
This patch fixes page faults when IOMMU is enabled.
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Link: https://lore.kernel.org/r/1564753899-17124-2-git-send-email-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AMD platform device acp3x_rv_i2s created by parent PCI device
driver. Pass struct device of the parent to
snd_pcm_lib_preallocate_pages() so dma_alloc_coherent() can use
correct dma_ops. Otherwise, it will use default dma_ops which
is nommu_dma_ops on x86_64 even when IOMMU is enabled and
set to non passthrough mode.
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Link: https://lore.kernel.org/r/1564753899-17124-1-git-send-email-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TCPM may receive PD messages associated with unknown or unsupported
alternate modes. If that happens, calls to typec_match_altmode()
will return NULL. The tcpm code does not currently take this into
account. This results in crashes.
Unable to handle kernel NULL pointer dereference at virtual address 000001f0
pgd = 41dad9a1
[000001f0] *pgd=00000000
Internal error: Oops: 5 [#1] THUMB2
Modules linked in: tcpci tcpm
CPU: 0 PID: 2338 Comm: kworker/u2:0 Not tainted 5.1.18-sama5-armv7-r2 #6
Hardware name: Atmel SAMA5
Workqueue: 2-0050 tcpm_pd_rx_handler [tcpm]
PC is at typec_altmode_attention+0x0/0x14
LR is at tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm]
...
[<c03fbee8>] (typec_altmode_attention) from [<bf8030fb>]
(tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm])
[<bf8030fb>] (tcpm_pd_rx_handler [tcpm]) from [<c012082b>]
(process_one_work+0x123/0x2a8)
[<c012082b>] (process_one_work) from [<c0120a6d>]
(worker_thread+0xbd/0x3b0)
[<c0120a6d>] (worker_thread) from [<c012431f>] (kthread+0xcf/0xf4)
[<c012431f>] (kthread) from [<c01010f9>] (ret_from_fork+0x11/0x38)
Ignore PD messages if the associated alternate mode is not supported.
Fixes: e9576fe8e6 ("usb: typec: tcpm: Support for Alternate Modes")
Cc: stable <stable@vger.kernel.org>
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1564761822-13984-1-git-send-email-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Usb core will reset the default control endpoint "ep0" before resetting
a device. if the endpoint has a valid pointer back to the usb device
then the xhci driver reset callback will try to clear the toggle for
the endpoint.
ep0 didn't use to have this pointer set as ep0 was always allocated
by default together with a xhci slot for the usb device. Other endpoints
got their usb device pointer set in xhci_add_endpoint()
This changed with commit ef513be0a9 ("usb: xhci: Add Clear_TT_Buffer")
which sets the pointer for any endpoint on a FS/LS device behind a
HS hub that halts, including ep0.
If xHC controller needs to be reset at resume, then all the xhci slots
will be lost. Slots will be reenabled and reallocated at device reset,
but unlike other endpoints the ep0 is reset before device reset, while
the xhci slot may still be invalid, causing NULL pointer dereference.
Fix it by checking that the endpoint has both a usb device pointer and
valid xhci slot before trying to clear the toggle.
This issue was not seen earlier as ep0 didn't use to have a valid usb
device pointer, and other endpoints were only reset after device reset
when xhci slots were properly reenabled.
Reported-by: Bob Gleitsmann <rjgleits@bellsouth.net>
Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Fixes: ef513be0a9 ("usb: xhci: Add Clear_TT_Buffer")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/1564758044-24748-1-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a USB device is connected to the host controller and
the system enters suspend, the following error happens
in xhci_suspend():
xhci-hcd ee000000.usb: WARN: xHC CMD_RUN timeout
Since the firmware/internal CPU control the USBSTS.STS_HALT
and the process speed is down when the roothub port enters U3,
long delay for the handshake of STS_HALT is neeed in xhci_suspend().
So, this patch adds to set the XHCI_SLOW_SUSPEND.
Fixes: 435cc1138e ("usb: host: xhci-plat: set resume_quirk() for R-Car controllers")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1564734815-17964-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull gfs2 fix from Andreas Gruenbacher:
"Fix gfs2 cluster coherency bug"
* tag 'gfs2-v5.3-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Inode dirtying fix
Pull power management fix from Rafael Wysocki:
"Fix recent regression affecting ACPI device power management"
* tag 'pm-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Fix regression in acpi_device_set_power()
Pull sound fixes from Takashi Iwai:
- A further fix for syzcaller issues with USB-audio, addressing NULL
dereference that was introduced by the recent fix
- Avoid a long delay at boot with HD-audio when i915 module was built
but not installed, found on some Debian systems
- A fix of small race window at PCM draining
* tag 'sound-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Fix gpf in snd_usb_pipe_sanity_check
ALSA: pcm: fix lost wakeup event scenarios in snd_pcm_drain
ALSA: hda: Fix 1-minute detection delay when i915 module is not available
Pull drm fixes from Dave Airlie:
"Thanks to Daniel for handling the email the last couple of weeks, flus
and break-ins combined to derail me. Surprised nothing materialised
today to take me out again.
Just more amdgpu navi fixes, msm fixes and a single nouveau regression
fix:
amdgpu:
- navi10 temperature and pstate fixes
- vcn dynamic power management fix
- CS ioctl error handling fix
- debugfs info leak fix
- amdkfd VegaM fix
msm:
- dma sync call fix
- mdp5 dsi command mode fix
- fall-through fixes
- disabled GPU fix
nouveau:
- regression fix for displayport MST support"
* tag 'drm-fixes-2019-08-02' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau: Only release VCPI slots on mode changes
drm: msm: Fix add_gpu_components
drm/msm: Annotate intentional switch statement fall throughs
drm/msm: add support for per-CRTC max_vblank_count on mdp5
drm/msm: Use the correct dma_sync calls in msm_gem
drm/amd/powerplay: correct UVD/VCE/VCN power status retrieval
drm/amd/powerplay: correct Navi10 VCN powergate control (v2)
drm/amd/powerplay: support VCN powergate status retrieval for SW SMU
drm/amd/powerplay: support VCN powergate status retrieval on Raven
drm/amd/powerplay: add new sensor type for VCN powergate status
drm/amdgpu: fix a potential information leaking bug
drm/amdgpu: fix error handling in amdgpu_cs_process_fence_dep
drm/amd/powerplay: enable SW SMU reset functionality
drm/amd/powerplay: fix null pointer dereference around dpm state relates
drm/amdgpu/powerplay: use proper revision id for navi
drm/amd/powerplay: fix temperature granularity error in smu11
drm/amd/powerplay: add callback function of get_thermal_temperature_range
drm/amdkfd: Fix byte align on VegaM
Pull clk fixes from Stephen Boyd:
"A few fixes for code that came in during the merge window or that
started getting exercised differently this time around:
- Select regmap MMIO kconfig in spreadtrum driver to avoid compile
errors
- Complete kerneldoc on devm_clk_bulk_get_optional()
- Register an essential clk earlier on mediatek mt8183 SoCs so the
clocksource driver can use it
- Fix divisor math in the at91 driver
- Plug a race in Renesas reset control logic"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: renesas: cpg-mssr: Fix reset control race condition
clk: sprd: Select REGMAP_MMIO to avoid compile errors
clk: mediatek: mt8183: Register 13MHz clock earlier for clocksource
clk: Add missing documentation of devm_clk_bulk_get_optional() argument
clk: at91: generated: Truncate divisor to GENERATED_MAX_DIV + 1
Pull arm swiotlb support from Christoph Hellwig:
"This fixes a cascade of regressions that originally started with the
addition of the ia64 port, but only got fatal once we removed most
uses of block layer bounce buffering in Linux 4.18.
The reason is that while the original i386/PAE code that was the first
architecture that supported > 4GB of memory without an iommu decided
to leave bounce buffering to the subsystems, which in those days just
mean block and networking as no one else consumed arbitrary userspace
memory.
Later with ia64, x86_64 and other ports we assumed that either an
iommu or something that fakes it up ("software IOTLB" in beautiful
Intel speak) is present and that subsystems can rely on that for
dealing with addressing limitations in devices. Except that the ARM
LPAE scheme that added larger physical address to 32-bit ARM did not
follow that scheme and thus only worked by chance and only for block
and networking I/O directly to highmem.
Long story, short fix - add swiotlb support to arm when build for LPAE
platforms, which actuallys turns out to be pretty trivial with the
modern dma-direct / swiotlb code to fix the Linux 4.18-ish regression"
* tag 'arm-swiotlb-5.3' of git://git.infradead.org/users/hch/dma-mapping:
arm: use swiotlb for bounce buffering on LPAE configs
dma-mapping: check pfn validity in dma_common_{mmap,get_sgtable}
Pull dma-mapping regression fixes from Christoph Hellwig:
"Two related regression fixes for changes from this merge window to fix
alignment issues introduced in the CMA allocation rework (Nicolin
Chen)"
* tag 'dma-mapping-5.3-3' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: page-align the size in dma_free_contiguous()
dma-contiguous: do not overwrite align in dma_alloc_contiguous()
VCN 2.0 firmware now requires a packet start command to be sent before
any other decode ring buffer command.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sets the CMD_SOURCE bit for VCN 2.0 Decoder Ring Buffer commands. This
bit was previously set by the RBC HW on older firmware. Newer firmware
uses a SW RBC and this bit has to be set by the driver.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
