Inlined xattr shared free space of inode block with inlined data or data
extent record, so the size of the later two should be adjusted when
inlined xattr is enabled. See ocfs2_xattr_ibody_init(). But this isn't
done well when reflink. For inode with inlined data, its max inlined
data size is adjusted in ocfs2_duplicate_inline_data(), no problem. But
for inode with data extent record, its record count isn't adjusted. Fix
it, or data extent record and inlined xattr may overwrite each other,
then cause data corruption or xattr failure.
One panic caused by this bug in our test environment is the following:
kernel BUG at fs/ocfs2/xattr.c:1435!
invalid opcode: 0000 [#1] SMP
Pid: 10871, comm: multi_reflink_t Not tainted 2.6.39-300.17.1.el5uek #1
RIP: ocfs2_xa_offset_pointer+0x17/0x20 [ocfs2]
RSP: e02b:ffff88007a587948 EFLAGS: 00010283
RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000000051e4
RDX: ffff880057092060 RSI: 0000000000000f80 RDI: ffff88007a587a68
RBP: ffff88007a587948 R08: 00000000000062f4 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000010
R13: ffff88007a587a68 R14: 0000000000000001 R15: ffff88007a587c68
FS: 00007fccff7f06e0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000015cf000 CR3: 000000007aa76000 CR4: 0000000000000660
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process multi_reflink_t
Call Trace:
ocfs2_xa_reuse_entry+0x60/0x280 [ocfs2]
ocfs2_xa_prepare_entry+0x17e/0x2a0 [ocfs2]
ocfs2_xa_set+0xcc/0x250 [ocfs2]
ocfs2_xattr_ibody_set+0x98/0x230 [ocfs2]
__ocfs2_xattr_set_handle+0x4f/0x700 [ocfs2]
ocfs2_xattr_set+0x6c6/0x890 [ocfs2]
ocfs2_xattr_user_set+0x46/0x50 [ocfs2]
generic_setxattr+0x70/0x90
__vfs_setxattr_noperm+0x80/0x1a0
vfs_setxattr+0xa9/0xb0
setxattr+0xc3/0x120
sys_fsetxattr+0xa8/0xd0
system_call_fastpath+0x16/0x1b
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While deleting a file with ocfs2_unlink(), there is a bug in this
function. This bug will result in filesystem read-only.
After calling ocfs2_orphan_add(), the file which will be deleted is
added into orphan dir. If ocfs2_delete_entry() fails, the file still
exists in the parent dir. And this scenario introduces a conflict of
metadata.
If a file is added into orphan dir, when we put inode of the file with
iput(), the inode i_flags is setted (~OCFS2_VALID_FL) in
ocfs2_remove_inode(), and then write back to disk.
But as previously mentioned, the file still exists in the parent dir.
On other nodes, the file can be still accessed. When first read the
file with ocfs2_read_blocks() from disk, It will check and avalidate
inode using ocfs2_validate_inode_block(). So File system will be
readonly because the inode is invalid. In other words, the inode
i_flags has been set (~OCFS2_VALID_FL).
[akpm@linux-foundation.org: cleanups]
[jeff.liu@oracle.com: s/inode_is_unlinkable/ocfs2_inode_is_unlinkable/]
Signed-off-by: Younger Liu <younger.liu@huawei.com>
Signed-off-by: Jensen <shencanquan@huawei.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ocfs2_relink_block_group(), we roll back all those changes if notify
intent to modify buffers for metadata update failed even if the relevant
buffer has not yet been modified/got dirty at that point, that are not
quite right because of:
- None buffer has been modified/dirty if failed to call
ocfs2_journal_access_gd() against the previous block group buffer
- Only the previous block group buffer has got dirty if failed to call
ocfs2_journal_access_gd() against the block group buffer
- There is no need to roll back the change for file entry buffer at all
Those problems will not cause anything wrong but unnecessary. This
patch fix them and kill the useless bg_ptr variable as well.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Younger Liu <younger.liu@huawei.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While adding a file into orphan dir in ocfs2_orphan_add(), it calls
__ocfs2_add_entry() before ocfs2_journal_access_di(). If
ocfs2_journal_access_di() failed, the file is added into orphan dir, and
orphan dir dinode updated, but file dinode has not been updated.
Accordingly, the data is not consistent between file dinode and orphan
dir.
So, need to call ocfs2_journal_access_di() before __ocfs2_add_entry(),
and if ocfs2_journal_access_di() failed, orphan_fe and
orphan_dir_inode->i_nlink need rollback.
This bug was added by 3939fda4 ("Ocfs2: Journaling i_flags and
i_orphaned_slot when adding inode to orphan dir.").
Signed-off-by: Younger Liu <younger.liu@huawei.com>
Acked-by: Jeff Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dlmlock_master() returns DLM_RECOVERING/DLM_MIGRATING/ DLM_FORWAR after
adding lock to blocked list if lockres has the state
DLM_LOCK_RES_RECOVERING/DLM_LOCK_RES_MIGRATING/ DLM_LOCK_RES_IN_PROGRESS.
so it will retry in dlmlock(). And this may cause dlm_thread fall into an
infinite loop
Thread1 dlm_thread
calls dlm_lock->dlmlock_master,
if lockresA is in state
DLM_LOCK_RES_RECOVERING, calls
__dlm_wait_on_lockres() and waits
until others threads clear this
state;
If cannot grant this lock,
adding lock to blocked list,
and return DLM_RECOVERING;
Grant this lock and move it to
grant list;
After a while, retry and
calls list_add_tail(), adding lock
to blocked list again.
Granted and blocked list of this lockres will become the following
conditions:
lock_res->granted.next = dlm_lock->list_head;
lock_res->blocked.next = dlm_lock->list_head;
dlm_lock->list_head.next = dlm_lock_resource->blocked;
When dlm_thread traverses the granted list, it will fall into an endless
loop, checking dlm_lock.list_head, dlm_lock->list_head.next
(i.e.lock_res->blocked), lock_res->blocked.next(i.e.dlm_lock.list_head
again) .....
Signed-off-by: joyce <xuejiufei@huawei.com>
Reviewed-by: jensen <shencanquan@huawei.com>
Cc: Jeff Liu <jeff.liu@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Free space checking will be done in ocfs2_xattr_ibody_init(). So remove
here.
[akpm@linux-foundation.org: remove unused local]
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While adding extends to a file, the credits are calculated incorrectly
and if the requested clusters is more than one (or more because we used
a conservative limit) then we run out of journal credits and we hit an
assert in journalling code.
The function parameter bits_wanted variable was not used at all.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ocfs2_remove_btree_range, when calling ocfs2_lock_refcount_tree and
ocfs2_prepare_refcount_change_for_del failed, it goes to out and then
tries to call mutex_unlock without mutex_lock before. And when calling
ocfs2_reserve_blocks_for_rec_trunc failed, it should free ref_tree
before return.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The difference between "count" and "len" is that "len" is capped at
4095. Changing it like this makes it match how sysfs_write_file() is
implemented.
This is a static analysis patch. I haven't found any store_attribute()
functions where this change makes a difference.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Need include "asm/uaccess.h" to pass compiling.
The related error (with allmodconfig):
arch/c6x/mm/init.c: In function `paging_init':
arch/c6x/mm/init.c:46:2: error: implicit declaration of function `set_fs' [-Werror=implicit-function-declaration]
arch/c6x/mm/init.c:46:9: error: `KERNEL_DS' undeclared (first use in this function)
arch/c6x/mm/init.c:46:9: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: <stable@vger.kernel.org> [3.10.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can't use !req->r_sent to check if OSD request is sent for the
first time, this is because __cancel_request() zeros req->r_sent
when OSD map changes. Rather than adding a new variable to struct
ceph_osd_request to indicate if it's sent for the first time, We
can call the unsafe callback only when unsafe OSD reply is received.
If OSD's first reply is safe, just skip calling the unsafe callback.
The purpose of unsafe callback is adding unsafe request to a list,
so that fsync(2) can wait for the safe reply. fsync(2) doesn't need
to wait for a write(2) that hasn't returned yet. So it's OK to add
request to the unsafe list when the first OSD reply is received.
(ceph_sync_write() returns after receiving the first OSD reply)
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
If we receive new caps from the auth MDS and the non-auth MDS is
revoking the newly issued caps, we should release the caps from
the non-auth MDS. The scenario is filelock's state changes from
SYNC to LOCK. Non-auth MDS revokes Fc cap, the client gets Fc cap
from the auth MDS at the same time.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
If caps are been revoking by the auth MDS, don't consider them as
issued even they are still issued by non-auth MDS. The non-auth
MDS should also be revoking/exporting these caps, the client just
hasn't received the cap revoke/export message.
The race I encountered is: When caps are exporting to new MDS, the
client receives cap import message and cap revoke message from the
new MDS, then receives cap export message from the old MDS. When
the client receives cap revoke message from the new MDS, the revoking
caps are still issued by the old MDS, so the client does nothing.
Later when the cap export message is received, the client removes
the caps issued by the old MDS. (Another way to fix the race is
calling ceph_check_caps() in handle_cap_export())
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
The locking order for pending vmtruncate is wrong, it can lead to
following race:
write wmtruncate work
------------------------ ----------------------
lock i_mutex
check i_truncate_pending check i_truncate_pending
truncate_inode_pages() lock i_mutex (blocked)
copy data to page cache
unlock i_mutex
truncate_inode_pages()
The fix is take i_mutex before calling __ceph_do_pending_vmtruncate()
Fixes: http://tracker.ceph.com/issues/5453
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
A malicious monitor can craft an auth reply message that could cause a
NULL function pointer dereference in the client's kernel.
To prevent this, the auth_none protocol handler needs an empty
ceph_auth_client_ops->build_request() function.
CVE-2013-1059
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Chanam Park <chanam.park@hkpco.kr>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Cc: stable@vger.kernel.org
Drop ignored return value. Fix allocation failure case to not leak.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Either in vfs_write or io_submit,it call file_start/end_write.
The different between file_start/end_write and sb_start/end_write is
file_ only handle regular file.But i think in ceph_aio_write,it only
for regular file.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Acked-by: Yan, Zheng <zheng.z.yan@intel.com>
gcc isn't quite smart enough and generates these warnings:
drivers/block/rbd.c: In function 'rbd_img_request_fill':
drivers/block/rbd.c:1266:22: warning: 'bio_list' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/block/rbd.c:2186:14: note: 'bio_list' was declared here
drivers/block/rbd.c:2247:10: warning: 'pages' may be used uninitialized in this function [-Wmaybe-uninitialized]
even though they are initialized for their respective code paths.
Signed-off-by: Sage Weil <sage@inktank.com>
We may receive old request reply from the exporter MDS after receiving
the importer MDS' cap import message.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
The client can receive truncate request from MDS at any time.
So the page writeback code need to get i_size, truncate_seq and
truncate_size atomically
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
ceph_encode_inode_release() can race with ceph_open() and release
caps wanted by open files. So it should call __ceph_caps_wanted()
to get the wanted caps.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
handle_reply() calls complete_request() only if the first OSD reply
has ONDISK flag.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Updating an image header needs to be protected to ensure it's
done consistently. However distinct headers can be updated
concurrently without a problem. Instead of using the global
control lock to serialize headder updates, just rely on the header
semaphore. (It's already used, this just moves it out to cover
a broader section of the code.)
That leaves the control mutex protecting only the creation of rbd
clients, so rename it.
This resolves:
http://tracker.ceph.com/issues/5222
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When an rbd device is first getting mapped, its device registration
is protected the control mutex. There is no need to do that though,
because the device has already been assigned an id that's guaranteed
to be unique.
An unmap of an rbd device won't proceed if the device has a non-zero
open count or is already being unmapped. So there's no need to hold
the control mutex in that case either.
Finally, an rbd device can't be opened if it is being removed, and
it won't go away if there is a non-zero open count. So here too
there's no need to hold the control mutex while getting or putting a
reference to an rbd device's Linux device structure.
Drop the mutex calls in these cases.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Make sure two concurrent unmap operations on the same rbd device
won't collide, by only proceeding with the removal and cleanup of a
device if is not already underway.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When unmapping a device, its id is supplied, and that is used to
look up which rbd device should be unmapped. Looking up the
device involves searching the rbd device list while holding
a spinlock that protects access to that list.
Currently all of this is done under protection of the control lock,
but that protection is going away soon. To ensure the rbd_dev is
still valid (still on the list) while setting its REMOVING flag, do
so while still holding the list lock. To do so, get rid of
__rbd_get_dev(), and open code what it did in the one place it
was used.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If an osd client response message arrives that has a front section
that's too big for the buffer set aside to receive it, a warning
gets reported and a new buffer is allocated.
The warning says nothing about which connection had the problem.
Add the peer type and number to what gets reported, to be a bit more
informative.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If more than one rbd image has the same ceph cluster configuration
(same options, same set of monitors, same keys) they normally share
a single rbd client.
When an image is getting mapped, rbd looks to see if an existing
client can be used, and creates a new one if not.
The lookup and creation are not done under a common lock though, so
mapping two images concurrently could lead to duplicate clients
getting set up needlessly. This isn't a major problem, but it's
wasteful and different from what's intended.
This patch fixes that by using the control mutex to protect
both the lookup and (if needed) creation of the client. It
was previously used just when creating.
This resolves:
http://tracker.ceph.com/issues/3094
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Neither zero_bio_chain() nor zero_pages() contains a call to flush
caches after zeroing a portion of a page. This can cause problems
on architectures that have caches that allow virtual address
aliasing.
This resolves:
http://tracker.ceph.com/issues/4777
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When an osd request is set to linger, the osd client holds onto the
request so it can be re-submitted following certain osd map changes.
The osd client holds a reference to the request until it is
unregistered. This is used by rbd for watch requests.
Currently, the reference is taken when the request is marked with
the linger flag. This means that if an error occurs after that
time but before the the request completes successfully, that
reference is leaked.
There's really no reason to take the reference until the request is
registered in the the osd client's list of lingering requests, and
that only happens when the lingering (watch) request completes
successfully.
So take that reference only when it gets registered following
succesful completion, and drop it (as before) when the request
gets unregistered. This avoids the reference problem on error
in rbd.
Rearrange ceph_osdc_unregister_linger_request() to avoid using
the request pointer after it may have been freed.
And hold an extra reference in kick_requests() while handling
a linger request that has not yet been registered, to ensure
it doesn't go away.
This resolves:
http://tracker.ceph.com/issues/3859
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
