The kernel can generate software receive timestamps and we should
report those for all ports regardless of hardware capabilities.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
PCI legacy interrupts are level-triggered, and we cannot mask them up
on an isolated device. Instead, disable the IRQ at the controller
until we have recovered.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Map BIT 9 in TX DMA DWARD 0 as HW write back option.
We must turn on this option in the last TX descriptor,
this is required for old HW compatability.
This option indicate to HW that WB is required for this descriptor.
Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The vring index (MAC queue id) must be set in all TX descriptors
otherwise HW will fail to release descriptors for a specific vring
(disconnect or vring switch flows).
This is normally occurs when fragmentation required, if vring index
will not be the same for all SKB descriptors HW will fail to flush
this MAC queue.
Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Use common names instead of chip specific ones.
The patch contains no functional changes, but
it makes it easier to add support for further
descriptor sizes.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Different chipsets may use different TXWI descriptor
size. Instead of using a hardcoded value, use the
'queue->winfo_size' which holds the correct value for
a given device.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The current code uses the same index value both
for the channel information array and for the TX
power table. The index starts from 14, however the
index of the TX power table must start from zero.
Fix it, in order to get the correct TX power value
for a given channel.
The changes in rt61pci.c and rt73usb.c are compile
tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: stable@vger.kernel.org
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Smatch complains that this is a read past the end of the array. It
turns out we are printing the wrong array here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Since platform support is required for WoW, identify and
and enable Wow only for supported cards.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Most of these relate to endianness problems, and are purely cosmetic.
But a couple of them were legit -- listen interval parsing and some of
the rate selection code would malfunction on BE systems.
There's still one cosmetic warning remaining, in the (admittedly) ugly
code in cw1200_spi.c. It's there because the hardware needs 16-bit SPI
transfers, but many SPI controllers only operate 8 bits at a time.
If there's a cleaner way of handling this, I'm all ears.
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Fix to return -ENOMEM in the ipw_rx_queue_alloc() error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
ath_tx_txqaddbuf assumes that all the linked buffers in the queue passed
to it are part of the same A-MPDU or MPDU. The CAB queue rework violates
this assumption, which can cause the internal queue depth to go
negative.
Fix this by increasing the counter for all slots of [bf, bf->bf_lastbf]
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This provides some of the same info found in
the ath9k_htc debugfs through the standard ethtool stats API.
This logic is only supported when ath9k_htc debugfs kernel
feature is enabled, since that is the only time stats
are actually gathered.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG
is specified.
For example, given those two files (Thomas' test-case):
---8<--- Config.test.in
config OPTIONA
bool "Option A"
choice
prompt "This is a choice"
config CHOICE_OPTIONA
bool "Choice Option A"
config CHOICE_OPTIONB
bool "Choice Option B"
endchoice
config OPTIONB
bool "Option B"
---8<--- Config.test.in
---8<--- config.defaults
CONFIG_OPTIONA=y
---8<--- config.defaults
And running:
./scripts/kconfig/conf --randconfig Config.test.in
does properly randomise the two choice symbols (and the two booleans).
However, running:
KCONFIG_ALLCONFIG=config.defaults \
./scripts/kconfig/conf --randconfig Config.test.in
does *not* reandomise the two choice entries, and only CHOICE_OPTIONA
will ever be selected. (OPTIONA will always be set (expected), and
OPTIONB will be be properly randomised (expected).)
This patch defers setting that a choice has a value until a symbol for
that choice is indeed set, so that choices are properly randomised when
KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
---
Changes v3 -> v4
- fix previous issue where some choices would not be set, which would
cause silentoldconfig to ask for them and was then breaking this
workflow (as reported by Arnd and Sedat):
KCONFIG_ALLCONFIG=foo.defconfig make randconfig
make silentoldconfig </dev/nullo
which I have tested (3h28min!) with:
touch defconfig
for(( i=0; i<10000; i++ )); do
KCONFIG_ALLCONFIG=$(pwd)/defconfig make randconfig >/dev/null 2>&1
make silentoldconfig </dev/null >/dev/null 2>&1 || break
done
which did not break at all.
- change done in v3 (below) is already fixed by a previous patch
Changes v2 -> v3
- ensure only one symbol is set in a choice
Changes v1 -> v2:
- further postpone setting that a choice has a value until
one is indeed set
- do not print symbols that are part of an invisible choice
Because of choice-in-a-choice constructs, it can happen that not all
symbols are assigned a value during randconfig, leading in rare cases
to this situation:
---8<--- choice-in-choice.in
choice
bool "A/B/C"
config A
bool "A"
config B
bool "B"
if B
choice
bool "E/F"
config E
bool "E"
config F
bool "F"
endchoice
endif # B
config C
bool "C"
endchoice
---8<---
$ ./scripts/kconfig/conf --randconfig choice-in-choice.in
[--SNIP--]
$ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null
[--SNIP--]
A/B/C
1. A (A)
> 2. B (B)
3. C (C)
choice[1-3]: 2
E/F
> 1. E (E) (NEW)
2. F (F) (NEW)
choice[1-2]: aborted!
Console input/output is redirected. Run 'make oldconfig' to update
configuration.
Fix this by looping in randconfig for as long as some symbol gets assigned
a value.
Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP),
which uses this choice-in-a-choice construct, and exhibits this problem.
The example above is just a stripped-down minimalist test-case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When searching for symbols, return the symbols sorted by relevance.
Sorting is done as thus:
- first, symbols that match exactly
- then, alphabetical sort
Since the search can be a regexp, it is possible that more than one symbol
matches exactly. In this case, we can't decide which to sort first, so we
fallback to alphabeticall sort.
Explain this (new!) sorting heuristic in the documentation.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Roland Eggner <edvx1@systemanalysen.net>
Cc: Wang YanQing <udknight@gmail.com>
--
Changes v1->v2:
- drop the previous, complex heuristic in favour of a simpler heuristic
that is both easier to understand, *and* to maintain (Jean)
- explain sorting heuristic in the doc (Jean)
ath_txq_schedule is called outside of the drv_tx call, so it needs RCU
protection.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Enable the PC parallel port and other related options in the Q40-specific
and multi-platform defconfigs.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
To use the PC parallel port driver on Q40, we need non-standard versions of
the insl/outsl accessors. Make sure to undefine them first, to kill this
compiler warning:
In file included from drivers/parport/parport_pc.c:67:
arch/m68k/include/asm/parport.h:14:1: warning: "insl" redefined
In file included from arch/m68k/include/asm/io.h:4,
from include/linux/scatterlist.h:10,
from include/linux/dma-mapping.h:9,
from drivers/parport/parport_pc.c:54:
arch/m68k/include/asm/io_mm.h:370:1: warning: this is the location of the previous definition
In file included from drivers/parport/parport_pc.c:67:
arch/m68k/include/asm/parport.h:15:1: warning: "outsl" redefined
In file included from arch/m68k/include/asm/io.h:4,
from include/linux/scatterlist.h:10,
from include/linux/dma-mapping.h:9,
from drivers/parport/parport_pc.c:54:
arch/m68k/include/asm/io_mm.h:373:1: warning: this is the location of the previous definition
Reported-by: Thorsten Glaser <tg@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
When compiling a MMU kernel with CPU_HAS_ADDRESS_SPACES=n (e.g. "MMU=y
allnoconfig": "echo CONFIG_MMU=y > allno.config && make KCONFIG_ALLCONFIG=1
allnoconfig"), we use plain "move" instead of "moves", and I got:
CC arch/m68k/lib/uaccess.o
{standard input}: Assembler messages:
{standard input}:47: Error: operands mismatch -- statement `move.b %a0,(%a1)' ignored
This happens because plain "move" doesn't support byte transfers between
memory and address registers, while "moves" does.
Fix the asm constraints for __generic_copy_from_user(),
__generic_copy_to_user(), and __clear_user() to only use data registers
when accessing userspace.
Also, relax the asm constraints for 16-bit userspace accesses in
__put_user() and __get_user(), as both "move" and "moves" do support
such transfers between memory and address registers.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The code uses
return foo;
goto err_type;
when instead the form should have been
ret = foo;
goto err_type;
Here this causes a useful release_mem_region to be skipped.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Laurent Vivier <Laurent@Vivier.EU>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
To get vectored interrupts working we need to switch from the default
handler handle_bad_irq() to something more sensible. Tested on a MVME177
board.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
'oldmant.m32[1]' is 'unsigned long' which can never be '< 0', and the
original author wanted to check whether the highest bit is set.
So make the bit test explicit (which is better than casting from 'unsigned
long' to 'long').
The related warning: (with EXTRA_CFLAGS=-W ARCH=m68k for allmodconfig)
arch/m68k/math-emu/fp_arith.c:522:4: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Allow CONFIG_EARLY_PRINTK without requiring both CONFIG_EMBEDDED and
CONFIG_DEBUG. Default to disabled.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
EXPORT_SYMBOL and inline directives are contradictory to each other.
The patch fixes this inconsistency.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Gcc may replace calls to standard string functions by open code and/or
calls to other standard string functions. If the replacement function is
not available out-of-line, link errors will happen.
To avoid this, the out-of-line versions were provided by
arch/m68k/lib/string.c, but they were usually not linked in anymore as
typically none of its symbols are referenced by built-in code.
However, if any module would need them, they would not be available.
Hence remove the inline strcpy() and strcat() implementations, remove
arch/m68k/lib/string.c, and let the generic string library code handle it.
Impact on a typical kernel build seems minimal or nonexistent:
- .text : 0x00001000 - 0x002aac74 (2728 KiB)
- .data : 0x002ada48 - 0x00392148 ( 914 KiB)
+ .text : 0x00001000 - 0x002aacf4 (2728 KiB)
+ .data : 0x002adac8 - 0x00392148 ( 914 KiB)
See also commit e00c73ee05 ("m68k: Remove
inline strlen() implementation").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
For the notification code, a couple of places build fdb entries on
the stack, use structure initialization instead and fix formatting.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Based on initial work by Mike Rapoport <mike.rapoport@ravellosystems.com>
Use list macros and RCU for tracking multiple remotes.
Note: this code assumes list always has at least one entry,
because delete is not supported.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The function vxlan_xmit_one always returns NETDEV_TX_OK, so there
is no point in keeping track of return values etc.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David L Stevens <dlstevens@us.ibm.com>
Put destruction of per-cpu statistics removal in
ndo_uninit since it is created by ndo_init.
This also avoids any problems that might be cause by destructor
being called after module removed.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It is possible for two cpu's to race creating vxlan device.
For most cases this is harmless, but the ability to assign "next
avaliable vxlan device" relies on rtnl lock being held across the
whole operation. Therfore two instances of calling:
ip li add vxlan%d vxlan ...
could collide and create two devices with same name.
To fix this defer creation of socket to a work queue, and
handle possible races there. Introduce a lock to ensure that
changes to vxlan socket hash list is SMP safe.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
