Pull input subsystem updates from Dmitry Torokhov:
"A few small fixups for cyttsp, wacom and xpad drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix for "Mad Catz Street Fighter IV FightPad" controllers
Input: wacom - add a new stylus (0x100802) for Intuos5 and Cintiqs
Input: add missing dependencies on CONFIG_HAS_IOMEM
Input: cyttsp - fix swapped mfg_stat and mfg_cmd registers
Input: cyttsp - add missing handshake
Input: cyttsp - fix memcpy size param
This is debug info, should at least be pr_debug(), but given
that this code is in upstream for two years, there is no
need to keep this debugging printk any more, so just remove it.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Issue 'set driver version' during driver load and after reset recovery
to notify the driver version to the firmware.
Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support to read memory section of adapter
dump using PEX DMA method. This method significantly improves
total adapter dump collection time.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
o Minimize sleep duration and check for adapter status.
o Exit from loopback test if adapter reset is detected.
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for configuring secondary unicast address which
will use existing HW filters to store all the unicast MAC
addresses and prevent device going into promiscuous mode.
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qlcnic_alloc_mbx_args() may fail due to failure in memory allocation.
This patch checks for failure of qlcnic_alloc_mbx_args() to avoid
potential invalid memory access.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I just stumbled across another[0] issue when scripts/setlocalversion
operates on a write-protected source tree. Back then[0] the source tree
was on an read-only NFS share, so "test -w" was introduced before "git
update-index" was run.
This time, the source tree is on read/write NFS share, but the permissions
are world-readable and only a specific user (or root) can write.
Thus, "test -w ." returns "0" and then runs "git update-index",
producing the following message (on a dirty tree):
fatal: Unable to create '/usr/local/src/linux-git/.git/index.lock': Permission denied
While it says "fatal", compilation continues just fine.
However, I don't think a kernel compilation should alter the source
tree (or the .git directory) in any way and I don't see how removing
"git update-index" could do any harm. The Mercurial and SVN routines in
scripts/setlocalversion don't have any tree-modifying commands, AFAICS.
So, maybe the patch below would be acceptable.
[0] https://patchwork.kernel.org/patch/29718/
Signed-off-by: Christian Kujau <lists@nerdbynature.de>
Cc: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The length of the registers area for the Marvell 370/XP Ethernet controller
was incorrect in the .dtsi: 0x2500, while it should have been 0x4000.
This problem wasn't noticed because there used to be a static mapping for
all the MMIO register region set up by ->map_io().
The register length was fixed in all the other device tree files,
except from the armada-xp-mv78260.dtsi, in the following commit:
commit cf8088c5ca
Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Tue May 21 12:33:27 2013 +0200
arm: mvebu: fix length of Ethernet registers area in .dtsi
This commit fixes a kernel panic in mvneta_probe(), when the kernel
tries to access the unmapped registers:
[ 163.639092] mvneta d0070000.ethernet eth0: mac: 6e:3c:4f:87:17:2e
[ 163.646962] mvneta d0074000.ethernet eth1: mac: 6a:04:4e:6f:f5:ef
[ 163.654853] mvneta d0030000.ethernet eth2: mac: 2a:99:19:19:fc:4c
[ 163.661258] Unable to handle kernel paging request at virtual address f011bcf0
[ 163.668523] pgd = c0004000
[ 163.671237] [f011bcf0] *pgd=2f006811, *pte=00000000, *ppte=00000000
[ 163.677565] Internal error: Oops: 807 [#1] SMP ARM
[ 163.682370] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc6-01850-gba0682e #11
[ 163.690046] task: ef04c000 ti: ef03e000 task.ti: ef03e000
[ 163.695467] PC is at mvneta_probe+0x34c/0xabc
[...]
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The current Makefile rules to build font support are messy and buggy.
Replace them by Kconfig rules:
- Introduce CONFIG_FONT_SUPPORT, which controls the building of all font
code,
- Select CONFIG_FONT_SUPPORT for all drivers that use fonts,
- Select CONFIG_FONT_8x16 for all drivers that default to the VGA8x16
font,
- Drop the bogus console dependency for CONFIG_VIDEO_VIVI,
- Always process drivers/video/console/Makefile, as some drivers need
fonts even if CONFIG_VT is not set.
This fixes (if CONFIG_SOLO6X10=y and there are no built-in console
drivers):
drivers/built-in.o: In function `solo_osd_print':
drivers/staging/media/solo6x10/solo6x10-enc.c:144: undefined reference to `.find_font'
This fixes (if CONFIG_VT=n):
drivers/built-in.o: In function `vivi_init':
vivi.c:(.init.text+0x1a3da): undefined reference to `find_font'
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com> [original part]
Acked-by: Randy Dunlap <rdunlap@infradead.org> [drivers/video/Makefile]
This reverts commit 8c090cfbf9.
CONFIG_FONTS is not about enabling font support, but about enabling
manual selection of built-in fonts.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
If CONFIG_PM_SLEEP is not set:
drivers/input/keyboard/cros_ec_keyb.c:211: warning: ‘cros_ec_keyb_clear_keyboard’ defined but not used
Move the definition of cros_ec_keyb_clear_keyboard() inside the section
protected by #ifdef CONFIG_PM_SLEEP to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
It just includes <asm-generic/dma-mapping-broken.h>, which is already
handled by <linux/dma-mapping.h> for the !CONFIG_HAS_DMA case (score sets
CONFIG_NO_DMA=y).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
crypto/xor.c:25:21: error: asm/xor.h: No such file or directory
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jonas Bonn <jonas@southpole.se>
On Ubuntu, where /bin/sh -> dash, "make ARCH=h8300 clean" gives:
printf: 1: $[0x00400000+0x00140000]: expected numeric value
Replace the bash-specific "$[...]" by POSIX "$((..))" for arithmetic
expansion to fix this.
Note that according to the bash 4.1 manpage, "$[...]" is deprecated, and
will be removed in upcoming versions of bash.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
arch/h8300/include/asm/io.h supports only H83007 (H8/3006,3007), H83068
(H8/3065,3066,3067,3068,3069), and H8S2678 (H8S/2670,2673,2674R,2675,2676)
CPU types.
Hence disable H83002 (H8/3001,3002,3003) and H83048
(H8/3044,3045,3046,3047,3048,3052) CPU support at the Kconfig level.
This fixes build failures in allmodconfig/allyesconfig builds, as these
always choose the first CPU type (H83002), which was unsupported:
arch/h8300/include/asm/io.h:13:2: error: #error UNKNOWN CPU TYPE
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
arch/h8300/kernel/timer/itu.c and arch/h8300/kernel/timer/tpu.c
only support 0--4 for CONFIG_H8300_ITU_CH resp. H8300_TPU_CH, hence limit
them to that range in Kconfig.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Ten years ago, a mismerge happened, concatenating two slightly different
versions of the same file. As a consequence, <asm-generic/tlb.h> was never
included, leading to a build failure only now:
kernel/cpu/idle.c: In function 'cpu_idle_loop':
kernel/cpu/idle.c:70:4: error: implicit declaration of function 'check_pgt_cache' [-Werror=implicit-function-declaration]
Remove the duplicates, and the header comment with the no longer correct
file name.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Commit e1b5bb6d12 ("consolidate cond_syscall
and SYSCALL_ALIAS declarations") broke the h8300 build because it removed
the duplicate SYMBOL_NAME() macro from arch/h8300/include/asm/linkage.h,
and all the h8300 asm files include <asm/linkage.h> instead of
<linux/linkage.h>:
arch/h8300/kernel/entry.S: Assembler messages:
arch/h8300/kernel/entry.S:158: Error: junk at end of line, first unrecognized character is `('
...
arch/h8300/kernel/syscalls.S: Assembler messages:
arch/h8300/kernel/syscalls.S:6: Error: junk at end of line, first unrecognized character is `('
...
arch/h8300/lib/abs.S: Assembler messages:
arch/h8300/lib/abs.S:12: Error: junk at end of line, first unrecognized character is `('
...
arch/h8300/lib/memcpy.S: Assembler messages:
arch/h8300/lib/memcpy.S:13: Error: junk at end of line, first unrecognized character is `('
...
arch/h8300/lib/memset.S: Assembler messages:
arch/h8300/lib/memset.S:13: Error: junk at end of line, first unrecognized character is `('
...
Commit 126de6b20b ("linkage.h: fix build
breakage due to symbol prefix handling") broke it even more, by removing
SYMBOL_NAME() and replacing it by __SYMBOL_NAME().
Commit f8ce1faf55 ("Merge tag
'modules-next-for-linus' of
git://git.kernel.org/pub/scm/linuxkernel/git/rusty/linux")
also removed __SYMBOL_NAME(), hidden in a merge conflict resolution.
Hence, replace the use of SYMBOL_NAME() and SYMBOL_NAME_LABEL() in h8300
assembler sources by hardcoding the underscore symbol prefix, like other
architectures (blackfin/metag) do.
This allows to kill SYMBOL_NAME_LABEL(). Now <asm/linkage.h> becomes empty,
and h8300 can be switched to asm-generic/linkage.h.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
If we use a large mapping, the expectation is that only unmaps from
the first pte in the superpage are supported. Unmaps from offsets
into the superpage should fail (ie. return zero sized unmap). In the
current code, unmapping from an offset clears the size of the full
mapping starting from an offset. For instance, if we map a 16k
physically contiguous range at IOVA 0x0 with a large page, then
attempt to unmap 4k at offset 12k, 4 ptes are cleared (12k - 28k) and
the unmap returns 16k unmapped. This potentially incorrectly clears
valid mappings and confuses drivers like VFIO that use the unmap size
to release pinned pages.
Fix by refusing to unmap from offsets into the page.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This patch has been invaluable in my adventures finding
issues in the perf NMI handler. I'm as big a fan of
printk() as anybody is, but using printk() in NMIs is
deadly when they're happening frequently.
Even hacking in trace_printk() ended up eating enough
CPU to throw off some of the measurements I was making.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch keeps track of how long perf's NMI handler is taking,
and also calculates how many samples perf can take a second. If
the sample length times the expected max number of samples
exceeds a configurable threshold, it drops the sample rate.
This way, we don't have a runaway sampling process eating up the
CPU.
This patch can tend to drop the sample rate down to level where
perf doesn't work very well. *BUT* the alternative is that my
system hangs because it spends all of its time handling NMIs.
I'll take a busted performance tool over an entire system that's
busted and undebuggable any day.
BTW, my suspicion is that there's still an underlying bug here.
Using the HPET instead of the TSC is definitely a contributing
factor, but I suspect there are some other things going on.
But, I can't go dig down on a bug like that with my machine
hanging all the time.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
[ Prettified it a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I have a system which is causing all kinds of problems. It has
8 NUMA nodes, and lots of cores that can fight over cachelines.
If things are not working _perfectly_, then NMIs can take longer
than expected.
If we get too many of them backed up to each other, we can
easily end up in a situation where we are doing nothing *but*
running NMIs. The biggest problem, though, is that this happens
_silently_. You might be lucky to get an hrtimer warning, but
most of the time system simply hangs.
This patch should at least give us some warning before we fall
off the cliff. the warnings look like this:
nmi_handle: perf_event_nmi_handler() took: 26095071 ns
The message is triggered whenever we notice the longest NMI
we've seen to date. You can always view and reset this value
via the debugfs interface if you like.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In case CONFIG_X86_MCE_THRESHOLD and CONFIG_X86_THERMAL_VECTOR
are disabled, kernel build fails as follows.
arch/x86/built-in.o: In function `trace_threshold_interrupt':
(.entry.text+0x122b): undefined reference to `smp_trace_threshold_interrupt'
arch/x86/built-in.o: In function `trace_thermal_interrupt':
(.entry.text+0x132b): undefined reference to `smp_trace_thermal_interrupt'
In this case, trace_threshold_interrupt/trace_thermal_interrupt
are not needed to define.
So, add config option checking to their definitions in entry_64.S.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/51C58B8A.2080808@hds.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some Bluetooth controllers doesn't support this command so we first
need to check for its support before sending it. This patch adds a
lengthful commentary about this.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The length check is invalid since the length varies with type of
info response.
This was introduced by the commit cb3b3152b2
Because of this, l2cap info rsp is not handled and command reject is sent.
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x00b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
< ACL data: handle 11 flags 0x00 dlen 10
L2CAP(s): Command rej: reason 0
Command not understood
Cc: stable@vger.kernel.org
Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: Chan-Yeol Park <chanyeol.park@samsung.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Add missing reset_resume dev_pm_ops. Missing reset_resume results in the
following message after power management device test. This change sets
reset_resume to btusb_resume().
[ 2506.936134] btusb 1-1.5:1.0: no reset_resume for driver btusb?
[ 2506.936137] btusb 1-1.5:1.1: no reset_resume for driver btusb?
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
For NULL terminated string, need always let it ended by zero.
Since have already called memcpy() to initialize 'ci', so need not
redundant initialization.
Better use ''if(session->hid) {} else if(session->input) {}"" instead
of ''if(session->hid) {}; if(session->input) {};''
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Use HCI_MGMT flag instead of HCI_LINK_KEYS flag. There is a problem with
HCI_LINK_KEYS flag since it is set only when link keys are loaded. Otherwise
kernel assumes that old interface is used.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
We only want to send Mgmt Device Found Events if we are running the
Device Discovery procedure (started by the MGMT Start Discovery
Command). Inquiry or LE scanning triggered by HCI raw interface (e.g.
hcitool) or kernel internals should not send Mgmt Device Found Events.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch removes the hci_cc_le_set_scan_param event handler. This
handler became empty because failures of this event are now handled
by start_discovery_complete function in mgmt.c.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch removes hci_do_inquiry and hci_cancel_inquiry helpers. We
now use the HCI request framework in device discovery functionality
and these helpers are no longer needed.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch removes the LE scan helpers hci_le_scan and hci_cancel_
le_scan and all code related to it. We now use the HCI request
framework in device discovery functionality and these helpers are
no longer needed.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch does a trivial refactoring in hci_cc_le_set_scan_enable.
Since start and stop discovery command failures are now handled in
mgmt layer, the status check became empty. So, we can move it to
outside the switch statement.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
mgmt_stop_discovery_failed is now only used in mgmt.c so we can
make it a local function. This patch also moves the mgmt_stop_
discovery_failed definition up in mgmt.c to avoid forward
declaration.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Since all mgmt stop discovery command complete events are now handled
in stop_discovery_complete callback in mgmt.c, we can remove this
handling from hci_event.c.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
This patch modifies the stop_discovery function so it uses the HCI
request framework.
The HCI request is built according to the current discovery state
(inquiry, LE scanning or name resolving) and a complete callback is
register to handle the command complete event for the stop discovery
command. This way, we move all stop_discovery mgmt handling code
spread in hci_event.c to a single place in mgmt.c.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
In order to have a better HCI error handling in interleaved discovery
functionality, we should use the HCI request framework.
This patch updates le_scan_disable_work function so it uses the
HCI request framework instead of the hci_send_cmd helper. A complete
callback is registered (le_scan_disable_work_complete function) so we
are able to trigger the inquiry procedure (if we are running the
interleaved discovery) or to stop the discovery procedure (if we are
running LE-only discovery).
This patch also removes the extra logic in hci_cc_le_set_scan_enable
to trigger the inquiry procedure and the mgmt_interleaved_discovery
function since they become useless.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
