The cec_register_cec_notifier function was in media/cec.h, but it
has to be in cec-notifier.h.
While we are at it, also document it and add a stub function for when
the notifier is disabled or the CEC core code is unreachable.
Based on an earlier patch from Jose Abreu <Jose.Abreu@synopsys.com>.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add support for CEC hardware that relies on low-level pin polling or
GPIO interrupts.
One example is the Allwinner SoC. But any GPIO-based CEC implementation can
use this as well.
A GPIO implementation is very suitable as well for debugging: it can use
interrupts to detect state changes and report it. Userspace can then verify
if the bus traffic is correct. This also makes error injection possible.
The disadvantage is that it is hard to get the timings right since linux
isn't a hard realtime system.
In general on an idle system it works quite well, but under load the timer
will miss its mark every so often.
The debugfs file /sys/kernel/debug/cec/cecX/status gives some statistics
with respect to the timer overruns.
When the adapter is unconfigured and the low-level driver supports
interrupts, then the interrupt will be used to detect changes. This should
be quite accurate. But when the adapter is configured a hrtimer has to be
used.
The hrtimer implements a state machine where for each state the code will
read the bus or drive the bus and go on to the next state. It will re-arm
the timer with a delay based on the next state.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Event handling was always fairly simplistic since there were only
two events. With the addition of pin events this needed to be redesigned.
The state_change and lost_msgs events are now core events with the
guarantee that the last state is always available. The new pin events
are a queue of events (up to 64 for each event) and the oldest event
will be dropped if the application cannot keep up. Lost events are
marked with a new event flag.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently the transmit_(attempt_)done and received_msg functions set
the timestamp themselves. For the upcoming low-level pin API we need
to pass this as an argument instead. So make _ts variants that allow
the caller to specify the timestamp.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kernel logging messes up the upcoming low-level CEC monitoring support
which is very time-sensitive. So change the debug level of this message
but keep a counter that is shown in the debugfs status log.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch adds support to the JESD216 rev B standard and parses the SFDP
tables to dynamically initialize the 'struct spi_nor_flash_parameter'.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
The CCP device is part of the AMD Secure Processor. In order to expand
the usage of the AMD Secure Processor, create a framework that allows
functional components of the AMD Secure Processor to be initialized and
handled appropriately.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Changes to the existing page table macros will allow the SME support to
be enabled in a simple fashion with minimal changes to files that use these
macros. Since the memory encryption mask will now be part of the regular
pagetable macros, we introduce two new macros (_PAGE_TABLE_NOENC and
_KERNPG_TABLE_NOENC) to allow for early pagetable creation/initialization
without the encryption mask before SME becomes active. Two new pgprot()
macros are defined to allow setting or clearing the page encryption mask.
The FIXMAP_PAGE_NOCACHE define is introduced for use with MMIO. SME does
not support encryption for MMIO areas so this define removes the encryption
mask from the page attribute.
Two new macros are introduced (__sme_pa() / __sme_pa_nodebug()) to allow
creating a physical address with the encryption mask. These are used when
working with the cr3 register so that the PGD can be encrypted. The current
__va() macro is updated so that the virtual address is generated based off
of the physical address without the encryption mask thus allowing the same
virtual address to be generated regardless of whether encryption is enabled
for that physical location or not.
Also, an early initialization function is added for SME. If SME is active,
this function:
- Updates the early_pmd_flags so that early page faults create mappings
with the encryption mask.
- Updates the __supported_pte_mask to include the encryption mask.
- Updates the protection_map entries to include the encryption mask so
that user-space allocations will automatically have the encryption mask
applied.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Toshimitsu Kani <toshi.kani@hpe.com>
Cc: kasan-dev@googlegroups.com
Cc: kvm@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/b36e952c4c39767ae7f0a41cf5345adf27438480.1500319216.git.thomas.lendacky@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Implement serial console driver to complement earlycon.
Based on LeMaker linux-actions tree.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB spec says that multiple byte fields are stored in
little-endian order (see chapter 8.1 of USB2.0 spec and
chapter 7.1 of USB3.0 spec), thus mark such fields as LE
for UAC1 and UAC2 headers
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Initial patches missed case with CONFIG_BPF_SYSCALL not set.
Fixes: 11393cc9b9 ("xdp: Add batching support to redirect map")
Fixes: 97f91a7cf0 ("bpf: add bpf_redirect_map helper routine")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are no users for IB_QP_CREATE_USE_GFP_NOIO flag,
so let's remove it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The caller to the driver marks GFP_NOIO allocations with help
of memalloc_noio-* calls now. This makes redundant to pass down
to the driver gfp flags, which can be GFP_KERNEL only.
The patch removes the gfp flags argument and updates all driver paths.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The caller to the driver marks GFP_NOIO allocations with help
of memalloc_noio-* calls now. This makes redundant to pass down
to the driver gfp flags, which can be GFP_KERNEL only.
The patch removes the gfp flags argument and updates all driver paths.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds new function ib_modify_qp_with_udata so that
uverbs layer can avoid handling L2 mac address at verbs layer
and depend on the core layer to resolve the mac address consistently
for all required QPs.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It was added for netlink mmap tx, there are no callers in the tree.
The commit also added a check for skb->head != NULL in kfree_skb path,
remove that too -- all skbs ought to have skb->head set.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BPF map devmap holds a refcnt on the net_device structure when
it is in the map. We need to do this to ensure on driver unload we
don't lose a dev reference.
However, its not very convenient to have to manually unload the map
when destroying a net device so add notifier handlers to do the cleanup
automatically. But this creates a race between update/destroy BPF
syscall and programs and the unregister netdev hook.
Unfortunately, the best I could come up with is either to live with
requiring manual removal of net devices from the map before removing
the net device OR to add a mutex in devmap to ensure the map is not
modified while we are removing a device. The fallout also requires
that BPF programs no longer update/delete the map from the BPF program
side because the mutex may sleep and this can not be done from inside
an rcu critical section. This is not a real problem though because I
have not come up with any use cases where this is actually useful in
practice. If/when we come up with a compelling user for this we may
need to revisit this.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For performance reasons we want to avoid updating the tail pointer in
the driver tx ring as much as possible. To accomplish this we add
batching support to the redirect path in XDP.
This adds another ndo op "xdp_flush" that is used to inform the driver
that it should bump the tail pointer on the TX ring.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
BPF programs can use the devmap with a bpf_redirect_map() helper
routine to forward packets to netdevice in map.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Device map (devmap) is a BPF map, primarily useful for networking
applications, that uses a key to lookup a reference to a netdevice.
The map provides a clean way for BPF programs to build virtual port
to physical port maps. Additionally, it provides a scoping function
for the redirect action itself allowing multiple optimizations. Future
patches will leverage the map to provide batching at the XDP layer.
Another optimization/feature, that is not yet implemented, would be
to support multiple netdevices per key to support efficient multicast
and broadcast support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a trace event for xdp redirect which may help when debugging
XDP programs that use redirect bpf commands.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for redirect to xdp generic creating a fall back for
devices that do not yet have support and allowing test infrastructure
using veth pairs to be built.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: Andy Gospodarek <andy@greyhouse.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for a bpf_redirect helper function to the XDP
infrastructure. For now this only supports redirecting to the egress
path of a port.
In order to support drivers handling a xdp_buff natively this patches
uses a new ndo operation ndo_xdp_xmit() that takes pushes a xdp_buff
to the specified device.
If the program specifies either (a) an unknown device or (b) a device
that does not support the operation a BPF warning is thrown and the
XDP_ABORTED error code is returned.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GCC 7 added a new -Wimplicit-fallthrough warning. It's only enabled
with W=1, but since linux/jhash.h is included in over hundred places
(including other global headers) it seems worthwhile fixing this
warning.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As discussed in Faro during Netfilter Workshop 2017, RB trees can be
used with RCU, using a seqlock.
Note that net/rxrpc/conn_service.c is already using this.
This patch converts inetpeer from AVL tree to RB tree, since it allows
to remove private AVL implementation in favor of shared RB code.
$ size net/ipv4/inetpeer.before net/ipv4/inetpeer.after
text data bss dec hex filename
3195 40 128 3363 d23 net/ipv4/inetpeer.before
1562 24 0 1586 632 net/ipv4/inetpeer.after
The same technique can be used to speed up
net/netfilter/nft_set_rbtree.c (removing rwlock contention in fast path)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All unix sockets now account inflight FDs to the respective sender.
This was introduced in:
commit 712f4aad40
Author: willy tarreau <w@1wt.eu>
Date: Sun Jan 10 07:54:56 2016 +0100
unix: properly account for FDs passed over unix sockets
and further refined in:
commit 415e3d3e90
Author: Hannes Frederic Sowa <hannes@stressinduktion.org>
Date: Wed Feb 3 02:11:03 2016 +0100
unix: correctly track in-flight fds in sending process user_struct
Hence, regardless of the stacking depth of FDs, the total number of
inflight FDs is limited, and accounted. There is no known way for a
local user to exceed those limits or exploit the accounting.
Furthermore, the GC logic is independent of the recursion/stacking depth
as well. It solely depends on the total number of inflight FDs,
regardless of their layout.
Lastly, the current `recursion_level' suffers a TOCTOU race, since it
checks and inherits depths only at queue time. If we consider `A<-B' to
mean `queue-B-on-A', the following sequence circumvents the recursion
level easily:
A<-B
B<-C
C<-D
...
Y<-Z
resulting in:
A<-B<-C<-...<-Z
With all of this in mind, lets drop the recursion limit. It has no
additional security value, anymore. On the contrary, it randomly
confuses message brokers that try to forward file-descriptors, since
any sendmsg(2) call can fail spuriously with ETOOMANYREFS if a client
maliciously modifies the FD while inflight.
Cc: Alban Crequy <alban.crequy@collabora.co.uk>
Cc: Simon McVittie <simon.mcvittie@collabora.co.uk>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pick up
1ed134e652 drm/vc4: Fix VBLANK handling in crtc->enable() path
From drm-misc-next-fixes, it was applied after the last pull request
was sent from that branch. We'll send it through drm-fixes instead.
topology_parse_cpu_capacity() returns 1 on success and 0 on errors. Make
it return bool instead of int as that suits the purpose better.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Tested-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a flag that is passed to the write_init() callback, indicating
that the bitstream is compressed.
The low-level driver will deal with the flag, or return an error,
if compressed bitstreams are not supported.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a function to reverse bytes within a 32 bit word.
Operate on a u32 rather than individual bytes.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a flag that is passed to the write_init() callback,
indicating that the SPI bitstream starts with LSB first.
SPI controllers usually send data with MSB first. If an
FPGA expects bitstream data as LSB first, the data must
be reversed either by the SPI controller or by the driver.
Alternatively the bitstream could be prepared as bit-reversed
to avoid the bit-swapping while sending. This flag indicates
such bit-reversed SPI bitstream. The low-level driver will
deal with the flag and perform bit-reversing if needed.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the ability to configure the MFP1->MFP5 registers
as GPIOs. In addition adding ALSA controls to get and set
the GPIO state.
Per the data sheet each MFP can be configured as a GPIO
input only, output only or either an input or output.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
