Stephen reports warnings when rendering phylink kdocs as HTML:
include/linux/phylink.h:110: ERROR: Unexpected indentation.
include/linux/phylink.h:111: WARNING: Block quote ends without a blank line; unexpected unindent.
include/linux/phylink.h:614: WARNING: Inline literal start-string without end-string.
include/linux/phylink.h:644: WARNING: Inline literal start-string without end-string.
Make phylink_pcs_neg_mode() use a proper list format to fix the first
two warnings.
The last two warnings, AFAICT, come from the use of shorthand like
phylink_mode_*(). Perhaps those should be special-cased at the Sphinx
level.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20230626162908.2f149f98@canb.auug.org.au/
Link: https://lore.kernel.org/r/20230626214640.3142252-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two deadly typos break RX and TX traffic on the VSC8502 PHY using RGMII
if phy-mode = "rgmii-id" or "rgmii-txid", and no "tx-internal-delay-ps"
override exists. The negative error code from phy_get_internal_delay()
does not get overridden with the delay deduced from the phy-mode, and
later gets committed to hardware. Also, the rx_delay gets overridden by
what should have been the tx_delay.
Fixes: dbb050d2bf ("phy: mscc: Add support for RGMII delay configuration")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230627134235.3453358-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Julia Lawall says:
====================
use vmalloc_array and vcalloc
The functions vmalloc_array and vcalloc were introduced in
commit a8749a35c3 ("mm: vmalloc: introduce array allocation functions")
but are not used much yet. This series introduces uses of
these functions, to protect against multiplication overflows.
The changes were done using the following Coccinelle semantic
patch.
@initialize:ocaml@
@@
let rename alloc =
match alloc with
"vmalloc" -> "vmalloc_array"
| "vzalloc" -> "vcalloc"
| _ -> failwith "unknown"
@@
size_t e1,e2;
constant C1, C2;
expression E1, E2, COUNT, x1, x2, x3;
typedef u8;
typedef __u8;
type t = {u8,__u8,char,unsigned char};
identifier alloc = {vmalloc,vzalloc};
fresh identifier realloc = script:ocaml(alloc) { rename alloc };
@@
(
alloc(x1*x2*x3)
|
alloc(C1 * C2)
|
alloc((sizeof(t)) * (COUNT), ...)
|
- alloc((e1) * (e2))
+ realloc(e1, e2)
|
- alloc((e1) * (COUNT))
+ realloc(COUNT, e1)
|
- alloc((E1) * (E2))
+ realloc(E1, E2)
)
v2: This series uses vmalloc_array and vcalloc instead of
array_size. It also leaves a multiplication of a constant by a
sizeof as is. Two patches are thus dropped from the series.
====================
Link: https://lore.kernel.org/r/20230627144339.144478-1-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In nfsd4_encode_fattr(), TIME_CREATE was being written out after all
other times. However, they should be written out in an order that
matches the bit flags in bmval1, which in this case are
#define FATTR4_WORD1_TIME_ACCESS (1UL << 15)
#define FATTR4_WORD1_TIME_CREATE (1UL << 18)
#define FATTR4_WORD1_TIME_DELTA (1UL << 19)
#define FATTR4_WORD1_TIME_METADATA (1UL << 20)
#define FATTR4_WORD1_TIME_MODIFY (1UL << 21)
so TIME_CREATE should come second.
I noticed this on a FreeBSD NFSv4.2 client, which supports creation
times. On this client, file times were weirdly permuted. With this
patch applied on the server, times looked normal on the client.
Fixes: e377a3e698 ("nfsd: Add support for the birth time attribute")
Link: https://unix.stackexchange.com/q/749605/56202
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
It is possible that the next available path we failover to, happens to
be frozen (for example if it is during connection establishment). If
the original I/O was set with NOWAIT, this cause the I/O to unnecessarily
fail because the request queue cannot be entered, hence the I/O fails with
EAGAIN.
The NOWAIT restriction that was originally set for the I/O is no longer
relevant or needed because this is the nvme requeue context. Hence we
clear the REQ_NOWAIT flag when failing over I/O.
This fix a simple test case of nvme controller reset during I/O when the
multipath device that has only a single path and I/O fails with "Resource
temporarily unavailable" errno. Note that this reproduces with io_uring
which by default sets IOCB_NOWAIT by default.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Correctly spell "Zeroes" in nvme_cmd_write_zeroes command name.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Commit 896e97bf99 ("ACPI: EC: Clear GPE on interrupt handling only")
broke suspend-to-idle at least on Dell XPS13 9360 and 9380.
The problem is that acpi_ec_dispatch_gpe() must clear the EC GPE,
because the EC GPE handler never runs when the system is in the
suspend-to-idle state and if the EC GPE is not cleared by the suspend-
to-idle loop, it is never cleared at all which leads to a GPE storm.
This causes suspend-to-idle to burn energy instead of saving it which
is potentially dangerous (the affected machines heat up rather badly
when that happens).
Addess this by making acpi_ec_dispatch_gpe() clear the EC GPE as it did
before.
Fixes: 896e97bf99 ("ACPI: EC: Clear GPE on interrupt handling only")
Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for generation of interrupts from the device directly to the
VM to the VCPU thus avoiding the overhead on the host CPU.
When supported, the driver will attempt to allocate vectors for each
data virtqueue. If a vector for a virtqueue cannot be provided it will
use the QP mode where notifications go through the driver.
In addition, we add a shutdown callback to make sure allocated
interrupts are released in case of shutdown to allow clean shutdown.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Message-Id: <20230607190007.290505-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add missing documentation for the vqs_list_lock field of struct virtio_device,
and the validate field of struct virtio_driver.
./scripts/kernel-doc says:
.../virtio.h:131: warning: Function parameter or member 'vqs_list_lock' not described in 'virtio_device'
.../virtio.h:192: warning: Function parameter or member 'validate' not described in 'virtio_driver'
2 warnings as Errors
No functional changes intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Message-Id: <20230510-virtio-kdoc-v3-1-e2681ed7a425@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
These are the adminq commands that will be needed for
setting up and using the vDPA device. There are a number
of commands defined in the FW's API, but by making use of
the FW's virtio BAR we only need a few of these commands
for vDPA support.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-9-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The pds_core_logical_qtype enum and IFNAMSIZ are not needed
in the common PDS header, only needed when working with the
adminq, so move them to the adminq header.
Note: This patch might conflict with pds_vfio patches that are
in review, depending on which patchset gets pulled first.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-5-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the initial auxiliary driver framework for a new vDPA
device driver, an auxiliary_bus client of the pds_core driver.
The pds_core driver supplies the PCI services for the VF device
and for accessing the adminq in the PF device.
This patch adds the very basics of registering for the auxiliary
device and setting up debugfs entries.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To add a bit of vendor flexibility with various virtio based devices,
allow the caller to specify a different DMA mask. This adds a dma_mask
field to struct virtio_pci_modern_device. If defined by the driver,
this mask will be used in a call to dma_set_mask_and_coherent() instead
of the traditional DMA_BIT_MASK(64). This allows limiting the DMA space
on vendor devices with address limitations.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To add a bit of vendor flexibility with various virtio based devices,
allow the caller to check for a different device id. This adds a function
pointer field to struct virtio_pci_modern_device to specify an override
device id check. If defined by the driver, this function will be called
to check that the PCI device is the vendor's expected device, and will
return the found device id to be stored in mdev->id.device. This allows
vendors with alternative vendor device ids to use this library on their
own device BAR.
Note: A lot of the diff in this is simply indenting the existing code
into an else block.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Improve the size of the virtio_pci_device structure, which is commonly
used to represent a virtio PCI device. A given virtio PCI device can
either of legacy type or modern type, with the
struct virtio_pci_legacy_device occupying 32 bytes and the
struct virtio_pci_modern_device occupying 88 bytes. Make them a union,
thereby save 32 bytes of memory as shown by the pahole tool. This
improvement is particularly beneficial when dealing with numerous
devices, as it helps conserve memory resources.
Before the modification, pahole tool reported the following:
struct virtio_pci_device {
[...]
struct virtio_pci_legacy_device ldev; /* 824 32 */
/* --- cacheline 13 boundary (832 bytes) was 24 bytes ago --- */
struct virtio_pci_modern_device mdev; /* 856 88 */
/* XXX last struct has 4 bytes of padding */
[...]
/* size: 1056, cachelines: 17, members: 19 */
[...]
};
After the modification, pahole tool reported the following:
struct virtio_pci_device {
[...]
union {
struct virtio_pci_legacy_device ldev; /* 824 32 */
struct virtio_pci_modern_device mdev; /* 824 88 */
}; /* 824 88 */
[...]
/* size: 1024, cachelines: 16, members: 18 */
[...]
};
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20230516135446.16266-1-feliu@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
"-mfunction-return=thunk -mindirect-branch-register" are only valid
for x86. So introduce compiler operation check to avoid such issues
Fixes: 0d0ed40061 ("tools/virtio: enable to build with retpoline")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20230323040024.3809108-1-peng.fan@oss.nxp.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than former lazy-initialization mechanism,
now the virtqueue operations and driver_features related
ops access the virtio registers directly to take
immediate actions. So ifcvf_start_datapath() should
retire.
ifcvf_add_status() is retierd because we should not change
device status by a vendor driver's decision, this driver should
only set device status which is from virito drivers
upon vdpa_ops.set_status()
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230526145254.39537-4-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit implements a new function ifcvf_get_driver_feature()
which read driver_features from virtio registers.
To be less ambiguous, ifcvf_set_features() is renamed to
ifcvf_set_driver_features(), and ifcvf_get_features()
is renamed to ifcvf_get_dev_features() which returns
the provisioned vDPA device features.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230526145254.39537-3-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add RmNet support for LARA-R6 01B.
The new LARA-R6 product variant identified by the "01B" string can be
configured (by AT interface) in three different USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial
interface and 1 CDC-ECM virtual network interface
The first 4 interfaces of all the 3 configurations (default, RmNet, ECM)
are the same.
In RmNet mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Link: https://lore.kernel.org/r/20230626125336.3127-1-davide.tronchin.94@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Our MPTCP CI and Stephen got this error:
In file included from builtin-trace.c:907:
trace/beauty/msg_flags.c: In function 'syscall_arg__scnprintf_msg_flags':
trace/beauty/msg_flags.c:28:21: error: 'MSG_SPLICE_PAGES' undeclared (first use in this function)
28 | if (flags & MSG_##n) { | ^~~~
trace/beauty/msg_flags.c:50:9: note: in expansion of macro 'P_MSG_FLAG'
50 | P_MSG_FLAG(SPLICE_PAGES);
| ^~~~~~~~~~
trace/beauty/msg_flags.c:28:21: note: each undeclared identifier is reported only once for each function it appears in
28 | if (flags & MSG_##n) { | ^~~~
trace/beauty/msg_flags.c:50:9: note: in expansion of macro 'P_MSG_FLAG'
50 | P_MSG_FLAG(SPLICE_PAGES);
| ^~~~~~~~~~
The fix is similar to what was done with MSG_FASTOPEN: the new macro is
defined if it is not defined in the system headers.
Fixes: b848b26c66 ("net: Kill MSG_SENDPAGE_NOTLAST")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20230626112847.2ef3d422@canb.auug.org.au/
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230626090239.899672-1-matthieu.baerts@tessares.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Reset shift on Boyer-Moore string match for each block,
from Jeremy Sowden.
2) Fix acccess to non-linear area in DCCP conntrack helper,
from Florian Westphal.
3) Fix kernel-doc warnings, by Randy Dunlap.
4) Bail out if expires= does not show in SIP helper message,
or make ct_sip_parse_numerical_param() tristate and report
error if expires= cannot be parsed.
5) Unbind non-anonymous set in case rule construction fails.
6) Fix underflow in chain reference counter in case set element
already exists or it cannot be created.
netfilter pull request 23-06-27
====================
Link: https://lore.kernel.org/r/20230627065304.66394-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the EFI stub will disable PCI DMA as the very last thing it
does before calling ExitBootServices(), to avoid interfering with the
firmware's normal operation as much as possible.
However, the stub will invoke DisconnectController() on all endpoints
downstream of the PCI bridges it disables, and this may affect the
layout of the EFI memory map, making it substantially more likely that
ExitBootServices() will fail the first time around, and that the EFI
memory map needs to be reloaded.
This, in turn, increases the likelihood that the slack space we
allocated is insufficient (and we can no longer allocate memory via boot
services after having called ExitBootServices() once), causing the
second call to GetMemoryMap (and therefore the boot) to fail. This makes
the PCI DMA disable feature a bit more fragile than it already is, so
let's make it more robust, by allocating the space for the EFI memory
map after disabling PCI DMA.
Fixes: 4444f8541d ("efi: Allow disabling PCI busmastering on bridges during boot")
Reported-by: Glenn Washburn <development@efficientek.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
As signature verification has a NULL destination buffer, the pointer
needs to be checked before the memcpy is done.
Fixes: addde1f2c9 ("crypto: akcipher - Add sync interface without SG lists")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ipvlan_queue_xmit() should return NET_XMIT_XXX, but
ipvlan_xmit_mode_l2/l3() returns rx_handler_result_t or NET_RX_XXX
in some cases. ipvlan_rcv_frame() will only return RX_HANDLER_CONSUMED
in ipvlan_xmit_mode_l2/l3() because 'local' is true. It's equal to
NET_XMIT_SUCCESS. But dev_forward_skb() can return NET_RX_SUCCESS or
NET_RX_DROP, and returning NET_RX_DROP(NET_XMIT_DROP) will increase
both ipvlan and ipvlan->phy_dev drops counter.
The skb to forward can be treated as xmitted successfully. This patch
makes ipvlan_queue_xmit() return NET_XMIT_SUCCESS for forward skb.
Fixes: 2ad7bf3638 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230626093347.7492-1-cambda@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The dst SG list needs to be set to NULL for verify calls. Do
this as otherwise the underlying algorithm may fail.
Furthermore the digest needs to be copied just like the source.
Fixes: 6cb8815f41 ("crypto: sig - Add interface for sign/verify")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
