Allow a single HS port to be used e.g. without reg property and a unit
address. OF graph allows a single port node, without 'reg' property.
This removes a couple of Warnings or errors on STM32MP boards.
When using single HS port currently, when doing building with W=1:
arch/arm/boot/dts/stm32mp157c-dk2.dtb: stusb1600@28: connector:
Unevaluated properties are not allowed ('port' was unexpected)
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20230620085633.533187-1-fabrice.gasnier@foss.st.com
Signed-off-by: Rob Herring <robh@kernel.org>
sort() in Linux is based on heapsort which is not a stable sort
algorithm - equal elements are being reordered. For reserved memory in
the device tree this happens mainly for dynamic allocations: They do not
have an address to sort with, so they are reordered somewhat randomly
when adding/removing other unrelated reserved memory nodes.
Functionally this is not a big problem, but it's confusing during
development when all the addresses change after adding unrelated
reserved memory nodes.
Make the order stable by sorting dynamic allocations according to
the node order in the device tree. Static allocations are not affected
by this because they are still sorted by their (fixed) address.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230510-dt-resv-bottom-up-v2-2-aeb2afc8ac25@gerhold.net
Signed-off-by: Rob Herring <robh@kernel.org>
Right now dynamic reserved memory regions are allocated either
bottom-up or top-down, depending on the memblock setting of the
architecture. This is fine when the address is arbitrary. However,
when using "alloc-ranges" the regions are often placed somewhere
in the middle of (free) RAM, even if the range starts or ends next
to another (static) reservation.
Try to detect this situation, and choose explicitly between bottom-up
or top-down to allocate the memory close to the other reservations:
1. If the "alloc-range" starts at the end or inside an existing
reservation, use bottom-up.
2. If the "alloc-range" ends at the start or inside an existing
reservation, use top-down.
3. If both or none is the case, keep the current
(architecture-specific) behavior.
There are plenty of edge cases where only a more complex algorithm
would help, but even this simple approach helps in many cases to keep
the reserved memory (and therefore also the free memory) contiguous.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230510-dt-resv-bottom-up-v2-1-aeb2afc8ac25@gerhold.net
Signed-off-by: Rob Herring <robh@kernel.org>
The Shineworld LH133K is a 1.3" 240x240px RGB LCD with a MIPI DBI
compatible SPI interface.
The initialization procedure is quite basic with the exception of
requiring inverted colors.
A basic mipi-dbi-cmd[1] script to get the display running thus looks
like this:
$ cat shineworld,lh133k.txt
command 0x11 # exit sleep mode
delay 120
# The display seems to require display color inversion, so enable it.
command 0x21 # INVON
# Enable normal display mode (in contrast to partial display mode).
command 0x13 # NORON
command 0x29 # MIPI_DCS_SET_DISPLAY_ON
$ mipi-dbi-cmd shineworld,lh133k.bin shineworld,lh133k.txt
[1]: https://github.com/notro/panel-mipi-dbi
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20230614123222.4167460-3-l.goehrs@pengutronix.de
Signed-off-by: Rob Herring <robh@kernel.org>
Currently the dtbs_check for imx6ul generates warnings like this:
['fsl,imx6ul-gpt', 'fsl,imx6sx-gpt'] is too long
According to the timer-imx-gpt driver all imx6 use the same imx6dl data,
but according to the existing DTS files the imx6ul GPT IP is derived from
imx6sx. So better follow the DTS files here and make the imx6ul GPT
compatible to the imx6sl one to fix the warning.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230530100843.15072-3-stefan.wahren@i2se.com
Signed-off-by: Rob Herring <robh@kernel.org>
Currently the dtbs_check for imx6 generates warnings like this:
'fsl,imx6sl-dcp' is not one of ['fsl,imx23-dcp', 'fsl,imx28-dcp']
['fsl,imx6sl-dcp', 'fsl,imx28-dcp'] is too long
or
'fsl,imx6ull-dcp' is not one of ['fsl,imx23-dcp', 'fsl,imx28-dcp']
['fsl,imx6ull-dcp', 'fsl,imx28-dcp'] is too long
So add them to the devicetree binding.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230530100843.15072-2-stefan.wahren@i2se.com
Signed-off-by: Rob Herring <robh@kernel.org>
Pull compute express link fixes from Dan Williams:
- Fix a compilation issue with DEFINE_STATIC_SRCU() in the unit tests
- Fix leaking kernel memory to a root-only sysfs attribute
* tag 'cxl-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Add missing return to cdat read error path
tools/testing/cxl: Use DEFINE_STATIC_SRCU()
Pull parisc architecture fixes from Helge Deller:
- Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
- Include reboot.h to avoid gcc-12 compiler warning
* tag 'parisc-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
parisc: kexec: include reboot.h
Pull ARM fixes from Russell King:
- fix unwinder for uleb128 case
- fix kernel-doc warnings for HP Jornada 7xx
- fix unbalanced stack on vfp success path
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9297/1: vfp: avoid unbalanced stack on 'success' return path
ARM: 9296/1: HP Jornada 7XX: fix kernel-doc warnings
ARM: 9295/1: unwind:fix unwind abort for uleb128 case
Pull locking fix from Borislav Petkov:
- Make sure __down_read_common() is always inlined so that the callers'
names land in traceevents output and thus the blocked function can be
identified
* tag 'locking_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Add __always_inline annotation to __down_read_common() and inlined callers
Pull perf fixes from Borislav Petkov:
- Make sure the PEBS buffer is flushed before reprogramming the
hardware so that the correct record sizes are used
- Update the sample size for AMD BRS events
- Fix a confusion with using the same on-stack struct with different
events in the event processing path
* tag 'perf_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG
perf/x86: Fix missing sample size update on AMD BRS
perf/core: Fix perf_sample_data not properly initialized for different swevents in perf_tp_event()
Pull scheduler fix from Borislav Petkov:
- Fix a couple of kernel-doc warnings
* tag 'sched_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: fix cid_lock kernel-doc warnings
Pull x86 fix from Borislav Petkov:
- Add the required PCI IDs so that the generic SMN accesses provided by
amd_nb.c work for drivers which switch to them. Add a PCI device ID
to k10temp's table so that latter is loaded on such systems too
* tag 'x86_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hwmon: (k10temp) Add PCI ID for family 19, model 78h
x86/amd_nb: Add PCI ID for family 19h model 78h
Pull timer fix from Borislav Petkov:
- Prevent CPU state corruption when an active clockevent broadcast
device is replaced while the system is already in oneshot mode
* tag 'timers_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/broadcast: Make broadcast device replacement work correctly
Pull ext4 fixes from Ted Ts'o:
"Some ext4 bug fixes (mostly to address Syzbot reports)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: bail out of ext4_xattr_ibody_get() fails for any reason
ext4: add bounds checking in get_max_inline_xattr_value_size()
ext4: add indication of ro vs r/w mounts in the mount message
ext4: fix deadlock when converting an inline directory in nojournal mode
ext4: improve error recovery code paths in __ext4_remount()
ext4: improve error handling from ext4_dirhash()
ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled
ext4: check iomap type only if ext4_iomap_begin() does not fail
ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum
ext4: fix data races when using cached status extents
ext4: avoid deadlock in fs reclaim with page writeback
ext4: fix invalid free tracking in ext4_xattr_move_to_block()
ext4: remove a BUG_ON in ext4_mb_release_group_pa()
ext4: allow ext4_get_group_info() to fail
ext4: fix lockdep warning when enabling MMP
ext4: fix WARNING in mb_find_extent
