Ido Schimmel says:
====================
mlxsw: Alter trap adjacency entry allocation scheme
In commit 0c3cbbf96d ("mlxsw: Add specific trap for packets routed via
invalid nexthops"), mlxsw started allocating a new adjacency entry
during driver initialization, to trap packets routed via invalid
nexthops.
This behavior was later altered in commit 983db6198f ("mlxsw:
spectrum_router: Allocate discard adjacency entry when needed") to only
allocate the entry upon the first route that requires it. The motivation
for the change is explained in the commit message.
The problem with the current behavior is that the entry shows up as a
"leak" in a new BPF resource monitoring tool [1]. This is caused by the
asymmetry of the allocation/free scheme. While the entry is allocated
upon the first route that requires it, it is only freed during
de-initialization of the driver.
Instead, this patchset tracks the number of active nexthop groups and
allocates the adjacency entry upon the creation of the first group. The
entry is freed when the number of active groups reaches zero.
Patch #1 adds the new entry.
Patch #2 converts mlxsw to start using the new entry and removes the old
one.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Start using the trap adjacency entry that was added in the previous
patch and remove the existing one which is no longer needed.
Note that the name of the old entry was inaccurate as the entry did not
discard packets, but trapped them.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 0c3cbbf96d ("mlxsw: Add specific trap for packets routed via
invalid nexthops"), mlxsw started allocating a new adjacency entry
during driver initialization, to trap packets routed via invalid
nexthops.
This behavior was later altered in commit 983db6198f ("mlxsw:
spectrum_router: Allocate discard adjacency entry when needed") to only
allocate the entry upon the first route that requires it. The motivation
for the change is explained in the commit message.
The problem with the current behavior is that the entry shows up as a
"leak" in a new BPF resource monitoring tool [1]. This is caused by the
asymmetry of the allocation/free scheme. While the entry is allocated
upon the first route that requires it, it is only freed during
de-initialization of the driver.
Instead, track the number of active nexthop groups and allocate the
adjacency entry upon the creation of the first group. Free it when the
number of active groups reaches zero.
The next patch will convert mlxsw to start using the new entry and
remove the old one.
[1] https://github.com/Mellanox/mlxsw/tree/master/Debugging/libbpf-tools/resmon
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix kernel-doc warnings in irq-mbigen.c:
irq-mbigen.c:29: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* In mbigen vector register
irq-mbigen.c:43: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* offset of clear register in mbigen node
irq-mbigen.c:50: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* offset of interrupt type register
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Jun Ma <majun258@huawei.com>
Cc: Yun Wu <wuyun.wu@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210905033644.15988-1-rdunlap@infradead.org
1> Function comments moved to .c file.
2> Use literals in return to improve readability.
3> Do error handling check instead of success check.
4> Redundant ret assignment removed.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid to call ksize again in __build_skb_around by passing
the result of data ksize to __build_skb_around
nginx stress test shows this change can reduce ksize cpu usage,
and give a little performance boost
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
devlink_register() can't fail and always returns success, but all drivers
are obligated to check returned status anyway. This adds a lot of boilerplate
code to handle impossible flow.
Make devlink_register() void and simplify the drivers that use that
API call.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ext2_error() function syncs the filesystem so it sleeps. The caller
is holding a spinlock so it's not allowed to sleep.
ext2_statfs() <- disables preempt
-> ext2_count_free_blocks()
-> ext2_get_group_desc()
Fix this by using WARN() to print an error message and a stack trace
instead of using ext2_error().
Link: https://lore.kernel.org/r/20210921203233.GA16529@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The function uses the newly introduced rockchip_gpio_readl_bit()
which directly returns the actual value of the requeste bit.
So using the existing bit-wise check for the bit inside the value
will always return 0.
Fix this by dropping the bit manipulation on the result.
Fixes: 3bcbd1a85b ("gpio/rockchip: support next version gpio controller")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The gpio driver runs into issues on v1 gpio blocks, as the db_clk
and the whole extended debounce support is only ever defined on v2.
So checking for the IS_ERR on the db_clk is not enough, as it will
be NULL on v1.
Fix this by adding the needed condition for v2 first before checking
the existence of the db_clk.
This caused my rk3288-veyron-pinky to enter a reboot loop when it
tried to enable the power-key as adc-key device.
Fixes: 3bcbd1a85b ("gpio/rockchip: support next version gpio controller")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The current hwirq is calculated based on the old GPIO pin order(input
GPIO range is from 0 to ngpios - 1).
It should be calculated based on the current GPIO input pin order(input
GPIOs are 0, 2, 4, ..., (ngpios - 1) * 2).
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The return type of irq_chip.irq_mask() and irq_chip.irq_unmask() should
be void.
Fixes: dbe776c2ca ("gpio: uniphier: add UniPhier GPIO controller driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Commit 8dcb7a15a5 ("gpiolib: acpi: Take into account debounce settings")
made the gpiolib-acpi code call gpio_set_debounce_timeout() when requesting
GPIOs.
This in itself is fine, but it also made gpio_set_debounce_timeout()
errors fatal, causing the requesting of the GPIO to fail. This is causing
regressions. E.g. on a HP ElitePad 1000 G2 various _AEI specified GPIO
ACPI event sources specify a debouncy timeout of 20 ms, but the
pinctrl-baytrail.c only supports certain fixed values, the closest
ones being 12 or 24 ms and pinctrl-baytrail.c responds with -EINVAL
when specified a value which is not one of the fixed values.
This is causing the acpi_request_own_gpiod() call to fail for 3
ACPI event sources on the HP ElitePad 1000 G2, which in turn is causing
e.g. the battery charging vs discharging status to never get updated,
even though a charger has been plugged-in or unplugged.
Make gpio_set_debounce_timeout() errors non fatal, warning about the
failure instead, to fix this regression.
Note we should probably also fix various pinctrl drivers to just
pick the first bigger discrete value rather then returning -EINVAL but
this will need to be done on a per driver basis, where as this fix
at least gets us back to where things were before and thus restores
functionality on devices where this was lost due to
gpio_set_debounce_timeout() errors.
Fixes: 8dcb7a15a5 ("gpiolib: acpi: Take into account debounce settings")
Depends-on: 2e2b496ceb ("gpiolib: acpi: Extract acpi_request_own_gpiod() helper")
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Since the actual_length calculation is performed unsigned, packets
shorter than 7 bytes (e.g. packets without data or otherwise truncated)
or non-received packets ("zero" bytes) can cause buffer overflow.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214437
Fixes: 42337b9d4d958("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Setting SCSI logging level with error=3, we saw some errors from enclosues:
[108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427778] ses 0:0:9:0: Power-on or device reset occurred
[108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current]
[108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred
[108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1
[108017.427804] ses 0:0:9:0: Failed to bind enclosure -19
[108017.427895] ses 0:0:10:0: Attached Enclosure device
[108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13
Retry if the Send/Receive Diagnostic commands complete with a transient
error status (NOT_READY or UNIT_ATTENTION with ASC 0x29).
Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.com
Reviewed-by: Brian King <brking@linux.ibm.com>
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
I fixed a stringop-overread warning earlier this year, now a second copy of
the original code was added and the warning came back:
drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_cmf_info_show':
drivers/scsi/lpfc/lpfc_attr.c:289:25: error: 'strnlen' specified bound 4095 exceeds source size 24 [-Werror=stringop-overread]
289 | strnlen(LPFC_INFO_MORE_STR, PAGE_SIZE - 1),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix it the same way as the other copy.
Link: https://lore.kernel.org/r/20210920095628.1191676-1-arnd@kernel.org
Fixes: ada48ba70f ("scsi: lpfc: Fix gcc -Wstringop-overread warning")
Fixes: 74a7baa2a3 ("scsi: lpfc: Add cmf_info sysfs entry")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The acornscsi driver has a config option to enable tagged queuing, but this
option gets disabled in the driver itself with the comment 'needs to be
debugged'. As this is a _really_ old driver I doubt anyone will be wanting
to invest time here, so remove the tagged queue vestiges and make our lives
easier.
[jpg: Use scsi_cmd_to_rq()]
Link: https://lore.kernel.org/r/1631696835-136198-3-git-send-email-john.garry@huawei.com
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This reverts commit a113eaaf86.
There are a couple of issues with the commit:
1. It causes deadlocks.
2. It causes the shost->eh_cmd_q list of failed requests not to be
processed, ever.
So revert it.
1. Deadlocks
The SCSI error handler runs with requests blocked beginning when
scsi_schedule_eh() sets SHOST_RECOVERY state, continuing through
scsi_error_handler() callback ->eh_strategy_handler() until
scsi_restart_operations() is called. By setting eh_strategy_handler to
ufshcd_err_handler, the patch changed the UFS error handler to run with
requests blocked, including PM requests, for the entire run of the error
handler.
That conflicts with UFS error handler existing synchronization with UFS
device PM operations. The UFS error handler synchronizes with runtime PM
by doing pm_runtime_get_sync() prior to blocking requests itself. It
synchronizes with system PM by use of hba->host_sem, again before blocking
requests itself. However, if requests are already blocked, then PM
operations will block. So:
the UFS error handler blocks waiting on PM
+ PM blocks waiting on SCSI PM requests to process or fail
+ PM requests are blocked waiting on error handling to finish
= deadlock
This happens both for runtime PM and system PM.
Prior to the patch, these deadlocks could not happen even if SCSI error
handling was running, because the presence of requests in shost->eh_cmd_q
would mean the queues could not be suspended, which would mean that, should
the UFS error handler run at the same time, it would not need to wait for
PM or vice versa.
Please note these scenarios are not just theoretical, they were found
during testing on a Samsung Galaxy Book S.
2. ->eh_strategy_handler() must process shost->eh_cmd_q list of failed
requests, as all other eh_strategy_handler's do except UFS error handler.
Refer for example: scsi_unjam_host(), ata_scsi_error() and
sas_scsi_recover_host().
Link: https://lore.kernel.org/r/20210917144349.14058-1-adrian.hunter@intel.com
Fixes: a113eaaf86 ("scsi: ufs: Synchronize SCSI and UFS error handling")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Julian Wiedmann says:
====================
s390/qeth: fixes 2021-09-21
This brings two fixes for deadlocks when a device is removed while it
has certain types of async work pending. And one additional fix for a
missing NULL check in an error case.
====================
Link: https://lore.kernel.org/r/20210921145217.1584654-1-jwi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 0b9902c1fc ("s390/qeth: fix deadlock during recovery") removed
taking discipline_mutex inside qeth_do_reset(), fixing potential
deadlocks. An error path was missed though, that still takes
discipline_mutex and thus has the original deadlock potential.
Intermittent deadlocks were seen when a qeth channel path is configured
offline, causing a race between qeth_do_reset and ccwgroup_remove.
Call qeth_set_offline() directly in the qeth_do_reset() error case and
then a new variant of ccwgroup_set_offline(), without taking
discipline_mutex.
Fixes: b41b554c1e ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Problem: qeth_close_dev_handler is a worker that tries to acquire
card->discipline_mutex via drv->set_offline() in ccwgroup_set_offline().
Since commit b41b554c1e
("s390/qeth: fix locking for discipline setup / removal")
qeth_remove_discipline() is called under card->discipline_mutex and
cancels the work and waits for it to finish.
STOPLAN reception with reason code IPA_RC_VEPA_TO_VEB_TRANSITION is the
only situation that schedules close_dev_work. In that situation scheduling
qeth recovery will also result in an offline interface, when resetting the
isolation mode fails, if the external switch is still set to VEB.
And since commit 0b9902c1fc ("s390/qeth: fix deadlock during recovery")
qeth recovery does not aquire card->discipline_mutex anymore.
So we accept the longer pathlength of qeth_schedule_recovery in this
error situation and re-use the existing function.
As a side-benefit this changes the hwtrap to behave like during recovery
instead of like during a user-triggered set_offline.
Fixes: b41b554c1e ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When qeth_set_online() calls qeth_clear_working_pool_list() to roll
back after an error exit from qeth_hardsetup_card(), we are at risk of
accessing card->qdio.in_q before it was allocated by
qeth_alloc_qdio_queues() via qeth_mpc_initialize().
qeth_clear_working_pool_list() then dereferences NULL, and by writing to
queue->bufs[i].pool_entry scribbles all over the CPU's lowcore.
Resulting in a crash when those lowcore areas are used next (eg. on
the next machine-check interrupt).
Such a scenario would typically happen when the device is first set
online and its queues aren't allocated yet. An early IO error or certain
misconfigs (eg. mismatched transport mode, bad portno) then cause us to
error out from qeth_hardsetup_card() with card->qdio.in_q still being
NULL.
Fix it by checking the pointer for NULL before accessing it.
Note that we also have (rare) paths inside qeth_mpc_initialize() where
a configuration change can cause us to free the existing queues,
expecting that subsequent code will allocate them again. If we then
error out before that re-allocation happens, the same bug occurs.
Fixes: eff73e16ee ("s390/qeth: tolerate pre-filled RX buffer")
Reported-by: Stefan Raspl <raspl@linux.ibm.com>
Root-caused-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrii Nakryiko says:
====================
Implement libbpf support for attaching uprobes/uretprobes using legacy
tracefs interfaces. This is a logical complement to recently landed legacy
kprobe support ([0]). This patch refactors existing legacy kprobe code to be more
uniform with uprobe code as well, making the logic easier to compare and
follow.
This patch set also fixes two bugs recently found by Coverity in legacy kprobe
handling code, and thus subsumes previously submitted two patches ([1]):
original patch #1 is kept as is, while original patch #2 was dropped because
patch #3 of the current series refactors and fixes affected code.
[0] https://patchwork.kernel.org/project/netdevbpf/patch/20210912064844.3181742-1-rafaeldtinoco@gmail.com/
[1] https://patchwork.kernel.org/project/netdevbpf/list/?series=549977&state=*
v1->v2:
- drop 'legacy = true' debug left-over and explain legacy check (Alexei).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similarly to recently added legacy kprobe attach interface support
through tracefs, support attaching uprobes using the legacy interface if
host kernel doesn't support newer FD-based interface.
For uprobes event name consists of "libbpf_" prefix, PID, sanitized
binary path and offset within that binary. Structuraly the code is
aligned with kprobe logic refactoring in previous patch. struct
bpf_link_perf is re-used and all the same legacy_probe_name and
legacy_is_retprobe fields are used to ensure proper cleanup on
bpf_link__destroy().
Users should be aware, though, that on old kernels which don't support
FD-based interface for kprobe/uprobe attachment, if the application
crashes before bpf_link__destroy() is called, uprobe legacy
events will be left in tracefs. This is the same limitation as with
legacy kprobe interfaces.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210921210036.1545557-5-andrii@kernel.org
Refactor legacy kprobe handling code to follow the same logic as uprobe
legacy logic added in the next patchs:
- add append_to_file() helper that makes it simpler to work with
tracefs file-based interface for creating and deleting probes;
- move out probe/event name generation outside of the code that
adds/removes it, which simplifies bookkeeping significantly;
- change the probe name format to start with "libbpf_" prefix and
include offset within kernel function;
- switch 'unsigned long' to 'size_t' for specifying kprobe offsets,
which is consistent with how uprobes define that, simplifies
printf()-ing internally, and also avoids unnecessary complications on
architectures where sizeof(long) != sizeof(void *).
This patch also implicitly fixes the problem with invalid open() error
handling present in poke_kprobe_events(), which (the function) this
patch removes.
Fixes: ca304b40c2 ("libbpf: Introduce legacy kprobe events support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210921210036.1545557-4-andrii@kernel.org
The problem is the mismatched types between "ctx->total_len" which is
an unsigned int, "rc" which is an int, and "ctx->rc" which is a
ssize_t. The code does:
ctx->rc = (rc == 0) ? ctx->total_len : rc;
We want "ctx->rc" to store the negative "rc" error code. But what
happens is that "rc" is type promoted to a high unsigned int and
'ctx->rc" will store the high positive value instead of a negative
value.
The fix is to change "rc" from an int to a ssize_t.
Fixes: c610c4b619 ("CIFS: Add asynchronous write support through kernel AIO")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The ARP table that is dumped when the xdp_router_ipv4 process is launched
has the IP address & MAC address in non-readable network byte order format,
also the alignment is off when printing the table.
Address HwAddress
160000e0 1600005e0001
ff96a8c0 ffffffffffff
faffffef faff7f5e0001
196a8c0 9607871293ea
fb0000e0 fb00005e0001
0 0
196a8c0 9607871293ea
ffff11ac ffffffffffff
faffffef faff7f5e0001
fb0000e0 fb00005e0001
160000e0 1600005e0001
160000e0 1600005e0001
faffffef faff7f5e0001
fb0000e0 fb00005e0001
40011ac 40011ac4202
Fix this by converting the "Address" field from network byte order Hex into
dotted decimal notation IPv4 format and "HwAddress" field from network byte
order Hex into Colon separated Hex format. Also fix the aligntment of the
fields in the ARP table.
Address HwAddress
224.0.0.22 01:00:5e:00:00:16
192.168.150.255 ff:ff:ff:ff:ff:ff
239.255.255.250 01:00:5e:7f:ff:fa
192.168.150.1 ea:93:12:87:07:96
224.0.0.251 01:00:5e:00:00:fb
0.0.0.0 00:00:00:00:00:00
192.168.150.1 ea:93:12:87:07:96
172.17.255.255 ff:ff:ff:ff:ff:ff
239.255.255.250 01:00:5e:7f:ff:fa
224.0.0.251 01:00:5e:00:00:fb
224.0.0.22 01:00:5e:00:00:16
224.0.0.22 01:00:5e:00:00:16
239.255.255.250 01:00:5e:7f:ff:fa
224.0.0.251 01:00:5e:00:00:fb
172.17.0.4 02:42:ac:11:00:04
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210919080305.173588-2-gokulkumar792@gmail.com
The route table that is dumped when the xdp_router_ipv4 process is launched
has the "Gateway" field in non-readable network byte order format, also the
alignment is off when printing the table.
Destination Gateway Genmask Metric Iface
0.0.0.0 196a8c0 0 0 enp7s0
0.0.0.0 196a8c0 0 0 wlp6s0
169.254.0.0 196a8c0 16 0 enp7s0
172.17.0.0 0 16 0 docker0
192.168.150.0 0 24 0 enp7s0
192.168.150.0 0 24 0 wlp6s0
Fix this by converting the "Gateway" field from network byte order Hex into
dotted decimal notation IPv4 format and "Genmask" from CIDR notation into
dotted decimal notation IPv4 format. Also fix the aligntment of the fields
in the route table.
Destination Gateway Genmask Metric Iface
0.0.0.0 192.168.150.1 0.0.0.0 0 enp7s0
0.0.0.0 192.168.150.1 0.0.0.0 0 wlp6s0
169.254.0.0 192.168.150.1 255.255.0.0 0 enp7s0
172.17.0.0 0.0.0.0 255.255.0.0 0 docker0
192.168.150.0 0.0.0.0 255.255.255.0 0 enp7s0
192.168.150.0 0.0.0.0 255.255.255.0 0 wlp6s0
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210919080305.173588-1-gokulkumar792@gmail.com
During the v5.13 cycle we updated the SPI subsystem to generate OF style
modaliases for SPI devices, replacing the old Linux style modalises we
used to generate based on spi_device_id which are the DT style name with
the vendor removed. Unfortunately this means that we start only
reporting OF style modalises and not the old ones and there is nothing
that ensures that drivers list every possible OF compatible string in
their OF ID table. The result is that there are systems which have been
relying on loading modules based on the old style that are now broken,
as found by Russell King with spi-nor on Macchiatobin.
spi-nor is a particularly problematic case for this, it only lists a
single generic DT compatible jedec,spi-nor in the driver but supports a
huge raft of device specific compatibles, with a large set of part
numbers many of which are offered by multiple vendors. Russell's
searches of upstream device trees has turned up examples with vendor
names written in non-standard ways too. To make matters worse up until
8ff16cf77c ("Documentation: devicetree: m25p80: add "nor-jedec"
binding") the generic compatible was not part of the binding so there
are device trees out there written to that binding version which don't
list it all. The sheer number of parts supported together with our
previous approach of ignoring the vendor ID makes robustly fixing this
by adding compatibles to the spi-nor driver seem problematic, the
current DT binding document does not list all the parts supported by the
driver at the minute (further patches will fix this).
I've also investigated supporting both formats of modalias
simultaneously but that doesn't seem possible, especially without
breaking our userspace ABI which is obviously not viable.
Instead revert the relevant changes for now:
e09f2ab8ee ("spi: update modalias_show after of_device_uevent_modalias support")
3ce6c9e261 ("spi: add of_device_uevent_modalias support")
This will unfortunately mean that any system which had started having
modules autoload based on the OF compatibles for drivers that list
things there but not in the spi_device_ids will now not have those
modules load which is itself a regression. Since it affects a narrower
time window and the particularly problematic spi-nor driver may be
critical to system boot on smaller systems this seems the best of a
series of bad options. I will start an audit of SPI drivers to identify
and fix cases where things won't autoload using spi_device_id, this is
not great but seems to be the best way forward that anyone has been able
to identify.
Thanks to Russell for both his report and the additional diagnostic and
analysis work he has done here, the detailed research above was his
work.
Fixes: e09f2ab8ee ("spi: update modalias_show after of_device_uevent_modalias support")
Fixes: 3ce6c9e261 ("spi: add of_device_uevent_modalias support")
Reported-by: Russell King (Oracle) <linux@armlinux.org.uk>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Andreas Schwab <schwab@suse.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Windows client expect to get default stream name(::DATA) in
FILE_STREAM_INFORMATION response even if there is no stream data in file.
This patch fix update failure when writing ppt or doc files.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-By: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
While we are working through detailed security reviews
of ksmbd server code we should remind users that it is an
experimental module by adding a warning when the module
loads. Currently the module shows as experimental
in Kconfig and is disabled by default, but we don't want
to confuse users.
Although ksmbd passes a wide variety of the
important functional tests (since initial focus had
been largely on functional testing such as smbtorture,
xfstests etc.), and ksmbd has added key security
features (e.g. GCM256 encryption, Kerberos support),
there are ongoing detailed reviews of the code base
for path processing and network buffer decoding, and
this patch reminds users that the module should be
considered "experimental."
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
During initialization of a signal testcase, features declared as required
are properly checked against the running system but no action is then taken
to effectively skip such a testcase.
Fix core signals test logic to abort initialization and report such a
testcase as skipped to the KSelfTest framework.
Fixes: f96bf43403 ("kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210920121228.35368-1-cristian.marussi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In MOTU protocol v2/v3, first two data chunks across 2nd and 3rd data
channels includes message bytes from device. The total size of message
is 48 bits per data block.
The 'data_block_message' tracepoints event produced by ALSA firewire-motu
driver exposes the sequence of messages to userspace in 64 bit storage,
however lower 32 bits are actually available since current implementation
truncates 16 bits in upper of the message as a result of bit shift
operation within 32 bit storage.
This commit fixes the bug by perform the bit shift in 64 bit storage.
Fixes: c6b0b9e65f ("ALSA: firewire-motu: add tracepoints for messages for unique protocol")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210920110734.27161-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull s390 eBPF fixes from Vasily Gorbik:
"Johan Almbladh has implemented a number of new testcases for eBPF [1],
which uncovered three miscompilation issues in the s390 eBPF JIT"
Link: https://lore.kernel.org/bpf/20210902185229.1840281-1-johan.almbladh@anyfinetworks.com/ [1]
* tag 's390-5.15-ebpf-jit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/bpf: Fix optimizing out zero-extensions
s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
s390/bpf: Fix branch shortening during codegen pass
