Commit 375553a932 ("PCI: Setup ACPI fwnode early and at the same time
with OF") added a call to pci_set_acpi_fwnode() in pci_setup_device(),
which unconditionally clears any fwnode previously set by
pci_set_of_node().
pci_set_acpi_fwnode() looks for ACPI_COMPANION(), which only returns the
existing fwnode if it was set by ACPI_COMPANION_SET(). If it was set by
OF instead, ACPI_COMPANION() returns NULL and pci_set_acpi_fwnode()
accidentally clears the fwnode. To fix this, look for any fwnode instead
of just ACPI companions.
Fixes a virtio-iommu boot regression in v5.15-rc1.
Fixes: 375553a932 ("PCI: Setup ACPI fwnode early and at the same time with OF")
Link: https://lore.kernel.org/r/20210913172358.1775381-1-jean-philippe@linaro.org
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
7bac54497c ("PCI/VPD: Determine VPD size in pci_vpd_init()") reads VPD at
enumeration-time to find the size. But this is quite slow, and we don't
need the size until we actually need data from VPD. Dave reported a boot
slowdown of more than two minutes [1].
Defer the VPD sizing until a driver or the user (via sysfs) requests
information from VPD.
If devices are quirked because VPD is known not to work, don't bother even
looking for the VPD capability. The VPD will not be accessible at all.
[1] https://lore.kernel.org/r/20210913141818.GA27911@codemonkey.org.uk/
Link: https://lore.kernel.org/r/20210914215543.GA1437800@bjorn-Precision-5520
Fixes: 7bac54497c ("PCI/VPD: Determine VPD size in pci_vpd_init()")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Earlier successes leave 'ret' in a non error state, so these errors are
not reported. Set ret to -EINVAL before going to the error handler.
This addresses two issues reported by smatch:
drivers/fpga/machxo2-spi.c:229 machxo2_write_init()
warn: missing error code 'ret'
drivers/fpga/machxo2-spi.c:316 machxo2_write_complete()
warn: missing error code 'ret'
[mdf@kernel.org: Reworded commit message]
Fixes: 88fb3a0023 ("fpga: lattice machxo2: Add Lattice MachXO2 support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
The qnx4 directory entries are 64-byte blocks that have different
contents depending on the a status byte that is in the last byte of the
block.
In particular, a directory entry can be either a "link info" entry with
a 48-byte name and pointers to the real inode information, or an "inode
entry" with a smaller 16-byte name and the full inode information.
But the code was written to always just treat the directory name as if
it was part of that "inode entry", and just extend the name to the
longer case if the status byte said it was a link entry.
That work just fine and gives the right results, but now that gcc is
tracking data structure accesses much more, the code can trigger a
compiler error about using up to 48 bytes (the long name) in a structure
that only has that shorter name in it:
fs/qnx4/dir.c: In function ‘qnx4_readdir’:
fs/qnx4/dir.c:51:32: error: ‘strnlen’ specified bound 48 exceeds source size 16 [-Werror=stringop-overread]
51 | size = strnlen(de->di_fname, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from fs/qnx4/qnx4.h:3,
from fs/qnx4/dir.c:16:
include/uapi/linux/qnx4_fs.h:45:25: note: source object declared here
45 | char di_fname[QNX4_SHORT_NAME_MAX];
| ^~~~~~~~
which is because the source code doesn't really make this whole "one of
two different types" explicit.
Fix this by introducing a very explicit union of the two types, and
basically explaining to the compiler what is really going on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The sparc mdesc code does pointer games with 'struct mdesc_hdr', but
didn't describe to the compiler how that header is then followed by the
data that the header describes.
As a result, gcc is now unhappy since it does stricter pointer range
tracking, and doesn't understand about how these things work. This
results in various errors like:
arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’:
arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
647 | if (!strcmp(names + ep[ret].name_offset, name))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
which are easily avoided by just describing 'struct mdesc_hdr' better,
and making the node_block() helper function look into that unsized
data[] that follows the header.
This makes the sparc64 build happy again at least for my cross-compiler
version (gcc version 11.2.1).
Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge absolute_pointer macro series from Guenter Roeck:
"Kernel test builds currently fail for several architectures with error
messages such as the following.
drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0
[-Werror=stringop-overread]
Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses if gcc's builtin functions are used for
those operations.
This series introduces absolute_pointer() to fix the problem.
absolute_pointer() disassociates a pointer from its originating symbol
type and context, and thus prevents gcc from making assumptions about
pointers passed to memory operations"
* emailed patches from Guenter Roeck <linux@roeck-us.net>:
alpha: Use absolute_pointer to define COMMAND_LINE
alpha: Move setup.h out of uapi
net: i825xx: Use absolute_pointer for memcpy from fixed memory location
compiler.h: Introduce absolute_pointer macro
alpha:allmodconfig fails to build with the following error
when using gcc 11.x.
arch/alpha/kernel/setup.c: In function 'setup_arch':
arch/alpha/kernel/setup.c:493:13: error:
'strcmp' reading 1 or more bytes from a region of size 0
Avoid the problem by declaring COMMAND_LINE as absolute_pointer().
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most of the contents of setup.h have no value for userspace
applications. The file was probably moved to uapi accidentally.
Keep the file in uapi to define the alpha-specific COMMAND_LINE_SIZE.
Move all other defines to arch/alpha/include/asm/setup.h.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc 11.x reports the following compiler warning/error.
drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]
Use absolute_pointer() to work around the problem.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
absolute_pointer() disassociates a pointer from its originating symbol
type and context. Use it to prevent compiler warnings/errors such as
drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]
Such warnings may be reported by gcc 11.x for string and memory
operations on fixed addresses.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The lib/bootconfig.c file is shared with the 'bootconfig' tooling, and
as a result, the changes incommit 77e02cf57b ("memblock: introduce
saner 'memblock_free_ptr()' interface") need to also be reflected in the
tooling header file.
So define the new memblock_free_ptr() wrapper, and remove unused __pa()
and memblock_free().
Fixes: 77e02cf57b ("memblock: introduce saner 'memblock_free_ptr()' interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
LKP/0Day reported some building errors about kvm, and errors message
are not always same:
- lib/x86_64/processor.c:1083:31: error: ‘KVM_CAP_NESTED_STATE’ undeclared
(first use in this function); did you mean ‘KVM_CAP_PIT_STATE2’?
- lib/test_util.c:189:30: error: ‘MAP_HUGE_16KB’ undeclared (first use
in this function); did you mean ‘MAP_HUGE_16GB’?
Although kvm relies on the khdr, they still be built in parallel when -j
is specified. In this case, it will cause compiling errors.
Here we mark target khdr as NOTPARALLEL to make it be always built
first.
CC: Philip Li <philip.li@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit c240ba2878 ("selftests/bpf: Add a test with a bpf
program with btf_tag attributes") added btf_tag selftest
to test BTF_KIND_TAG generation from C source code, and to
test kernel validation of generated BTF types.
But if an old clang (clang 13 or earlier) is used, the
following compiler warning may be seen:
progs/tag.c:23:20: warning: unknown attribute 'btf_tag' ignored
and the test itself is marked OK. The compiler warning is bad
and the test itself shouldn't be marked OK.
This patch added the check for btf_tag attribute support.
If btf_tag is not supported by the clang, the attribute will
not be used in the code and the test will be marked as skipped.
For example, with clang 13:
./test_progs -t btf_tag
#21 btf_tag:SKIP
Summary: 1/0 PASSED, 1 SKIPPED, 0 FAILED
The selftests/README.rst is updated to clarify when the btf_tag
test may be skipped.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210915061036.2577971-1-yhs@fb.com
Readers of rwbase can lock and unlock without taking any inner lock, if
that happens, we need the ordering provided by atomic operations to
satisfy the ordering semantics of lock/unlock. Without that, considering
the follow case:
{ X = 0 initially }
CPU 0 CPU 1
===== =====
rt_write_lock();
X = 1
rt_write_unlock():
atomic_add(READER_BIAS - WRITER_BIAS, ->readers);
// ->readers is READER_BIAS.
rt_read_lock():
if ((r = atomic_read(->readers)) < 0) // True
atomic_try_cmpxchg(->readers, r, r + 1); // succeed.
<acquire the read lock via fast path>
r1 = X; // r1 may be 0, because nothing prevent the reordering
// of "X=1" and atomic_add() on CPU 1.
Therefore audit every usage of atomic operations that may happen in a
fast path, and add necessary barriers.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20210909110203.953991276@infradead.org
In perf_event_addr_filters_apply, the task associated with
the event (event->ctx->task) is read using READ_ONCE at the beginning
of the function, checked, and then re-read from event->ctx->task,
voiding all guarantees of the checks. Reuse the value that was read by
READ_ONCE to ensure the consistency of the task struct throughout the
function.
Fixes: 375637bc52 ("perf/core: Introduce address range filtering")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210906015310.12802-1-baptiste.lepers@gmail.com
This reverts commit 2112ff5ce0.
We no longer need to track the truncation count, the one user that did
need it has been converted to using iov_iter_restore() instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Get rid of the need to do re-expand and revert on an iterator when we
encounter a short IO, or failure that warrants a retry. Use the new
state save/restore helpers instead.
We keep the iov_iter_state persistent across retries, if we need to
restart the read or write operation. If there's a pending retry, the
operation will always exit with the state correctly saved.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the new PIDs to wacom_wac.c to support the new models in the Intuos series.
[jkosina@suse.cz: fix changelog]
Signed-off-by: Joshua Dickens <joshua.dickens@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Ido Schimmel says:
====================
mlxsw: Add support for transceiver modules reset
This patchset prepares mlxsw for future transceiver modules related [1]
changes and adds reset support via the existing 'ETHTOOL_RESET'
interface.
Patches #1-#6 are relatively straightforward preparations.
Patch #7 tracks the number of logical ports that are mapped to the
transceiver module and the number of logical ports using it that are
administratively up. Needed for both reset support and power mode policy
support.
Patches #8-#9 add required fields in device registers.
Patch #10 implements support for ethtool_ops::reset in order to reset
transceiver modules.
[1] https://lore.kernel.org/netdev/20210824130344.1828076-1-idosch@idosch.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement support for ethtool_ops::reset in order to reset transceiver
modules. The module backing the netdev is reset when the 'ETH_RESET_PHY'
flag is set. After a successful reset, the flag is cleared by the driver
and other flags are ignored. This is in accordance with the interface
documentation:
"The reset() operation must clear the flags for the components which
were actually reset. On successful return, the flags indicate the
components which were not reset, either because they do not exist in the
hardware or because they cannot be reset independently. The driver must
never reset any components that were not requested."
Reset is useful in order to allow a module to transition out of a fault
state. From section 6.3.2.12 in CMIS 5.0: "Except for a power cycle, the
only exit path from the ModuleFault state is to perform a module reset
by taking an action that causes the ResetS transition signal to become
TRUE (see Table 6-11)".
An error is returned when the netdev is administratively up:
# ip link set dev swp11 up
# ethtool --reset swp11 phy
ETHTOOL_RESET 0x40
Cannot issue ETHTOOL_RESET: Invalid argument
# ip link set dev swp11 down
# ethtool --reset swp11 phy
ETHTOOL_RESET 0x40
Components reset: 0x40
An error is returned when the module is shared by multiple ports (split
ports) and the "phy-shared" flag is not set:
# devlink port split swp11 count 4
# ethtool --reset swp11s0 phy
ETHTOOL_RESET 0x40
Cannot issue ETHTOOL_RESET: Invalid argument
# ethtool --reset swp11s0 phy-shared
ETHTOOL_RESET 0x400000
Components reset: 0x400000
# devlink port unsplit swp11s0
# ethtool --reset swp11 phy
ETHTOOL_RESET 0x40
Components reset: 0x40
An error is also returned when one of the ports using the module is
administratively up:
# devlink port split swp11 count 4
# ip link set dev swp11s1 up
# ethtool --reset swp11s0 phy-shared
ETHTOOL_RESET 0x400000
Cannot issue ETHTOOL_RESET: Invalid argument
# ip link set dev swp11s1 down
# ethtool --reset swp11s0 phy-shared
ETHTOOL_RESET 0x400000
Components reset: 0x400000
Reset is performed by writing to the "rst" bit of the PMAOS register,
which instructs the firmware to assert the reset signal connected to the
module for a fixed amount of time.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PMAOS register has enable bits (e.g., PMAOS.ee) that allow changing
only a subset of the fields, which is exactly what subsequent patches
will need to do. Instead of passing multiple arguments to its pack
function, only pass the module index and let the rest be set by the
different callers.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Ports Module Administrative and Operational Status (PMAOS) register
configures and retrieves the per-module status. Extend it with fields
required to support various module settings such as reset and power
mode.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the common port module core, track the number of logical ports that
are mapped to the port module and the number of logical ports using it
that are administratively up.
This will be used by later patches to potentially veto and control
certain operations on the module, such as reset and setting its power
mode.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The return value is never checked. Allows us to simplify a later patch.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The return value is not checked by the networking stack. Allows us to
simplify a later patch.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch, the lock is always taken in process context so
it can be converted to a mutex. It is needed for future changes where we
will need to be able to sleep when holding the lock.
Convert the lock to a mutex.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Module temperature events are currently handled in softIRQ context,
requiring the 'module_info_lock' to be a spin lock. In future patchsets
we will need to be able to hold the lock while sleeping.
Therefore, defer handling of these events using a work queue so that the
next patch will be able to convert the lock to a mutex.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch, the switch driver is always initialized last,
making this function redundant.
Remove it.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 961cf99a07 ("mlxsw: core: Re-order initialization sequence")
changed the initialization sequence so that the switch driver (e.g.,
mlxsw_spectrum) is initialized before registration with the hwmon and
thermal subsystems.
This was done in order to avoid situations where hwmon/thermal code uses
features not supported by current firmware version, which is only
validated as part of switch driver initialization.
Later, commit b79cb787ac ("mlxsw: Move fw flashing code into core.c")
moved firmware validation and flashing code from the switch driver to
mlxsw_core so that it is performed before driver initialization.
Therefore, change the initialization sequence back to its original form.
In addition to being more straightforward, it will allow us to simplify
parts of the code in subsequent patches and future patchsets.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky says:
====================
devlink: Delete publish of single parameter API
This short series removes the single parameter publish/unpublish API
that does nothing expect mimics already existing
devlink_paramss_*publish calls.
In near future, we will be able to delete devlink_paramss_*publish too.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need in specific devlink_param_*publish(), because same
output can be achieved by using devlink_params_*publish() in correct
places.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The devlink parameters were published in two steps despite being static
and known in advance.
First step was to use devlink_params_publish() which iterated over all
known up to that point parameters and sent notification messages.
In second step, the call was devlink_param_publish() that looped over
same parameters list and sent notification for new parameters.
In order to simplify the API, move devlink_params_publish() to be called
when all parameters were already added and save the need to iterate over
parameters list again.
As a side effect, this change fixes the error unwind flow in which
parameters were not marked as unpublished.
Fixes: 82e6c96f04 ("net/mlx5: Register to devlink ingress VLAN filter trap")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6tables only sets the `IP6T_F_PROTO` flag on a rule if a protocol is
specified (`-p tcp`, for example). However, if the flag is not set,
`ip6_packet_match` doesn't call `ipv6_find_hdr` for the skb, in which
case the fragment offset is left uninitialized and a garbage value is
passed to each matcher.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a selftest for checking mq children are visible after ethtool -L.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For testing visibility of mq/mqprio default children.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
mq / mqprio make the default child qdiscs visible. They only do
so for the qdiscs which are within real_num_tx_queues when the
device is registered. Depending on order of calls in the driver,
or if user space changes config via ethtool -L the number of
qdiscs visible under tc qdisc show will differ from the number
of queues. This is confusing to users and potentially to system
configuration scripts which try to make sure qdiscs have the
right parameters.
Add a new Qdisc_ops callback and make relevant qdiscs TTRT.
Note that this uncovers the "shortcut" created by
commit 1f27cde313 ("net: sched: use pfifo_fast for non real queues")
The default child qdiscs beyond initial real_num_tx are always
pfifo_fast, no matter what the sysfs setting is. Fixing this
gets a little tricky because we'd need to keep a reference
on whatever the default qdisc was at the time of creation.
In practice this is likely an non-issue the qdiscs likely have
to be configured to non-default settings, so whatever user space
is doing such configuration can replace the pfifos... now that
it will see them.
Reported-by: Matthew Massey <matthewmassey@fb.com>
Reviewed-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
