Pull ARM SoC fixes from Olof Johansson:
"A few more fixes that have come in, and one revert of a previous fix.
I was a bit too trigger happy to enable PREEMPT on multi_v7_defconfig,
and it ended up regressing at least BeagleBone XM boards. While we get
that debugged for next merge window, let's disable it again.
Beyond that:
- Stratix change to fix multicast filtering
- Minor DT fixes for Renesas and i.MX
- Ethernet fix for a Renesas board (switching main interfaces)
- Ethernet phy regulator fix for i.MX6SX"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: stratix10: fix multicast filtering
ARM: defconfig: Disable PREEMPT again on multi_v7
arm64: dts: renesas: condor: switch from EtherAVB to GEther
dt-bindings: arm: Fix RZ/G2E part number
arm64: dts: renesas: r8a7795: add missing dma-names on hscif2
ARM: dts: imx6sx-sdb: Fix enet phy regulator
ARM: dts: fsl: Fix improperly quoted stdout-path values
ARM: dts: imx6sll: fix typo for fsl,imx6sll-i2c node
Pull HID fixes from Jiri Kosina:
- hid.git is moving towards group maintainership (where group is myself
and Benjamin Tissoires), therefore this pull request updates
MAINTAINERS accordingly
- fix for hid-asus config dependency from Arnd Bergmann
- two device-specific quirks for i2c-hid from Julian Sax and Kai-Heng
Feng
- other few small assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: fix up .raw_event() documentation
HID: asus: fix build warning wiht CONFIG_ASUS_WMI disabled
HID: i2c-hid: add Direkt-Tek DTLAPY133-1 to descriptor override
HID: moving to group maintainership model
HID: alps: allow incoming reports when only the trackstick is opened
Revert "HID: add NOGET quirk for Eaton Ellipse MAX UPS"
HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel
HID: hiddev: fix potential Spectre v1
Fix an issue with the 32-bit range error path in `rtc_hctosys' where no
error code is set and consequently the successful preceding call result
from `rtc_read_time' is propagated to `rtc_hctosys_ret'. This in turn
makes any subsequent call to `hctosys_show' incorrectly report in sysfs
that the system time has been set from this RTC while it has not.
Set the error to ERANGE then if we can't express the result due to an
overflow.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Fixes: b3a5ac42ab ("rtc: hctosys: Ensure system time doesn't overflow time_t")
Cc: stable@vger.kernel.org # 4.17+
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When there is no IRQ configured for the RTC, the rtc-cmos code does not
support alarms, all alarm rtc_ops fail with -EIO / -EINVAL.
The rtc-core expects a rtc driver which does not support rtc alarms to
not have alarm ops at all. Otherwise the wakealarm sysfs attr will read
as empty rather then returning an error, making it impossible for
userspace to find out beforehand if alarms are supported.
A system without an IRQ for the RTC before this patch:
[root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm
[root@localhost ~]#
After this patch:
[root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm
cat: /sys/class/rtc/rtc0/wakealarm: No such file or directory
[root@localhost ~]#
This fixes gnome-session + systemd trying to use suspend-then-hibernate,
which causes systemd to abort the suspend when writing the RTC alarm fails.
BugLink: https://github.com/systemd/systemd/issues/9988
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
ARM: dts: stratix10: fix multicast filtering
On Stratix 10, the EMAC has 256 hash buckets for multicast filtering. This
needs to be specified in DTS, otherwise the stmmac driver defaults to 64
buckets and initializes the filter incorrectly. As a result, e.g. valid
IPv6 multicast traffic ends up being dropped.
* tag 'stratix10_dts_fix_for_v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10: fix multicast filtering
Signed-off-by: Olof Johansson <olof@lixom.net>
bs.bh was taken in previous ext4_xattr_block_find() call,
it should be released before re-using
Fixes: 7e01c8e542 ("ext3/4: fix uninitialized bs in ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.26
Renesas ARM Based SoC Fixes for v4.20
* R-Car V3H (r8a77980) based Condor board
- Switch from EtherAVB to GEther to match offical boards
* RZ/G2E (ra8774c0) SoC: correct documentation of part number
* R-Car H3 (r8a7795) SoC: reinstate all DMA channels on HSCIF2
* tag 'renesas-fixes-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: condor: switch from EtherAVB to GEther
dt-bindings: arm: Fix RZ/G2E part number
arm64: dts: renesas: r8a7795: add missing dma-names on hscif2
Signed-off-by: Olof Johansson <olof@lixom.net>
SLIM_MSG_CLK_PAUSE_SEQ_FLG is never set in any of the slim core,
so performing a check in ngd driver is totally unnecessary.
Also this patch fixes warning about mc field overflow reported
with CoverityScan.
Making clk pause feature optional will be added to slim core in
next development cycle.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 917809e228 ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The order in which the frequencies are displayed in cpufreq stats
depends on the order in which the frequencies were sorted in the
frequency table provided to cpufreq core by the cpufreq driver. They can
be completely unsorted as well.
The documentation's claim that the stats will be sorted in descending
order is hence incorrect and here is an attempt to fix it.
Reported-by: Pavel <pavel2000@ngs.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Raydium USB touchscreen fails to set config if LPM is enabled:
[ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119
[ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.030660] usb 1-8: Product: Raydium Touch System
[ 2.030661] usb 1-8: Manufacturer: Raydium Corporation
[ 7.132209] usb 1-8: can't set config #1, error -110
Same behavior can be observed on 2386:3114.
Raydium claims the touchscreen supports LPM under Windows, so I used
Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows
that the LPM doesn't work under Windows, either. So let's just disable LPM
for Raydium touchscreens.
[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Following on from this patch: https://lkml.org/lkml/2017/11/3/516,
Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to
start correctly at boot.
Dmesg output:
usb 1-6: string descriptor 0 read error: -110
usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: can't set config #1, error -110
Signed-off-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devices connected under Terminus Technology Inc. Hub (1a40:0101) may
fail to work after the system resumes from suspend:
[ 206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd
[ 206.143691] usb 3-2.4: device descriptor read/64, error -32
[ 206.351671] usb 3-2.4: device descriptor read/64, error -32
Info for this hub:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1a40 ProdID=0101 Rev=01.11
S: Product=USB 2.0 Hub
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
Some expirements indicate that the USB devices connected to the hub are
innocent, it's the hub itself is to blame. The hub needs extra delay
time after it resets its port.
Hence wait for extra delay, if the device is connected to this quirky
hub.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit b37f9e1c38 ("staging: rtl8723bs: Fix lines too long in
update_recvframe_attrib()."), the refactoring involved replacing
two memcmp() calls with ether_addr_equal() calls. What the author
missed is that memcmp() returns false when the two strings are equal,
whereas ether_addr_equal() returns true when the two addresses are
equal. One side effect of this error is that the strength of an
unassociated AP was much stronger than the same AP after association.
This bug is reported at bko#201611.
Fixes: b37f9e1c38 ("staging: rtl8723bs: Fix lines too long in update_recvframe_attrib().")
Cc: Stable <stable@vger.kernel.org>
Cc: youling257 <youling257@gmail.com>
Cc: u.srikant.patnaik@gmail.com
Reported-and-tested-by: youling257 <youling257@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function 'mtk_hsdma_start_transfer' uses 'tx_desc' pointer which can be
dereferenced before it is initializated. Initializate pointer before
avoiding the problem.
Fixes: 0853c7a53e ("staging: mt7621-dma: ralink: add rt2880 dma engine")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uses a single macro to define multiple macros that represent a series of
terminals for NI devices. This patch also redefines NI_MAX_COUNTERS as the
maximum number of counters possible on NI devices (instead of the maximum
index of the counters). This was a little confusing and caused a bug in
commit 347e244884 ("staging: comedi: tio: implement global tio/ctr routing")
when setting/reading registers for counter terminals.
Fixes: 347e244884 ("staging: comedi: tio: implement global tio/ctr routing")
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently if count is an invalid value the v4l2_info message will
dereference a null ctx pointer to get the dev information. Fix
this by finding ctx first and then checking for an invalid count,
this way ctxt will be non-null hence avoiding the null pointer
dereference.
Detected by CoverityScan, CID#1475337 ("Explicit null dereferenced")
Fixes: 50e761516f ("media: platform: Add Cedrus VPU decoder driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We return 0 unconditionally in 'rtw_wx_read32()'.
However, 'ret' is set to some error codes in several error handling paths.
Return 'ret' instead to propagate the error code.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes implementation of INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS for
ni_mio devices. The previous patch should have used the channel
information passed in to scale the result by the number of channels being
used.
Fixes: 51fd367383 ("staging: comedi: ni_mio_common: implement INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS")
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TRACE_INCLUDE_PATH and TRACE_INCLUDE_FILE are used by
<trace/define_trace.h>, so like that #include, they should
be outside #ifdef protection.
They also need to be #undefed before defining, in case multiple trace
headers are included by the same C file. This became the case on
book3e after commit cf4a608515 ("powerpc/mm: Add missing tracepoint for
tlbie"), leading to the following build error:
CC arch/powerpc/kvm/powerpc.o
In file included from arch/powerpc/kvm/powerpc.c:51:0:
arch/powerpc/kvm/trace.h:9:0: error: "TRACE_INCLUDE_PATH" redefined
[-Werror]
#define TRACE_INCLUDE_PATH .
^
In file included from arch/powerpc/kvm/../mm/mmu_decl.h:25:0,
from arch/powerpc/kvm/powerpc.c:48:
./arch/powerpc/include/asm/trace.h:224:0: note: this is the location of
the previous definition
#define TRACE_INCLUDE_PATH asm
^
cc1: all warnings being treated as errors
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Adapt XRC SRQ to the latest HW specification with fixed definition
around umem valid bits. The previous definition relied on a bit which
was taken for other purposes in legacy FW.
Fixes: bd37197554 ("net/mlx5: Update mlx5_ifc with DEVX UID bits")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This reverts commit d87161bea4.
The issues that forced us to disable blk_mq for ufs have been resolved.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Three regressions
- Revert frame counter support
. This patch fixes a issue which doesn't work extension and clone
mode because some CRTC devices don't provide frame counter value
properly.
- Fix lack of fbdev on Rinato and trats boards.
. This patch considers for connector to be registered by DSI after
DRM device is registered, and also it makes fbdev initializaion
to be done even if no connector at the moment.
- Check for dsi->panel object correctly
. This patch fixes checking for dsi->panel. of_drm_find_panel
function returns panel object or error value so error value
should be checked using IS_ERR macro.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541407733-7632-1-git-send-email-inki.dae@samsung.com
ext4_mark_iloc_dirty() callers expect that it releases iloc->bh
even if it returns an error.
Fixes: 0db1ff222d ("ext4: add shutdown bit and check for it")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 4.11
Similar to ppfeaturemask. Allows you to selectively enable/disable
DC features.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The value is dependent on whether fbc is available.
v2: only check if num_pipes is valid
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x'
prefix, which is somewhat misleading.
Fix it to print hexadecimal, as was intended.
Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.")
Cc: Charlene Liu <charlene.liu@amd.com>
Cc: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 0cafc82fae.
This breaks some apps that assume 0 is minimum brightness.
Revert for 4.20. This is fixed properly for drm-next/4.21 in:
"drm/amd: Don't fail on backlight = 0"
However, that patch depends on more extensive changes to the
backlight interface which are too invasive for -fixes.
Fixes: Bugzilla: https://bugs.freedesktop.org/108668
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
