Several names had been recently appended (instead of inserted). While
git-shortlog doesn't need this file to be sorted, it helps humans to
keep it organized this way. Sort the entire file (which includes some
minor shuffling for dictionary order).
Done with the following commands:
grep -E '^(#|$)' .mailmap > .mailmap.head
grep -Ev '^(#|$)' .mailmap > .mailmap.body
sort -f .mailmap.body > .mailmap.body.sort
cat .mailmap.head .mailmap.body.sort > .mailmap
rm .mailmap.head .mailmap.body.sort
Signed-off-by: Kees Cook <keescook@chromium.org>
All GEN12 platforms supports PSR2 selective fetch but not all GEN12
platforms supports PSR2 hardware tracking(aka RKL).
This feature consists in software programming registers with the
damaged area of each plane this way hardware will only fetch from
memory those areas and sent the PSR2 selective update blocks to panel,
saving even more power.
But as initial step it is only enabling the full frame fetch at
every flip, the actual selective fetch part will come in a future
patch.
Also this is only handling the page flip side, it is still completely
missing frontbuffer modifications, that is why the
enable_psr2_sel_fetch parameter was added.
v3:
- calling intel_psr2_sel_fetch_update() during the atomic check phase
(Ville)
BSpec: 55229
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200810174144.76761-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We usually assume that increasing PCI device revision ID's translates to
newer steppings; macros like IS_KBL_REVID() that we use rely on this
behavior. Unfortunately this turns out to not be true on KBL; the
newer device 2 revision ID's sometimes go backward to older steppings.
The situation is further complicated by different GT and display
steppings associated with each revision ID.
Let's work around this by providing a table to map the revision ID to
specific GT and display steppings, and then perform our comparisons on
the mapped values.
v2:
- Move the kbl_revids[] array to intel_workarounds.c to avoid compiler
warnings about an unused variable in files that don't call the
macros (kernel test robot).
Bspec: 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811032105.2819370-1-matthew.d.roper@intel.com
Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The command register is the PCODE MBOX low register not the high one as
described by the spec. This left the system with the TC-cold power state
being blocked all the time. Fix things by using the correct register.
Also to make sure we retry a request for at least 600usec, when the
PCODE MBOX command itself succeeded, but the TC-cold block command
failed, sleep for 1msec unconditionally after any fail.
The change was tested with JTAG register read of the HW/FW's actual
TC-cold state, which reported the expected states after this change.
Tested-by: Nivedita Swaminathan <nivedita.swaminathan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805150056.24248-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The dependency between power wells is determined by the ordering of the
power well list: when enabling the power wells for a domain, this
happens walking the power well list forward, while disabling them
happens in the reverse direction. Accordingly a power well on the list
must follow any other power well it depends on.
Since the TC AUX power wells depend on TC-cold being blocked, move the
TC-cold off power well before all AUX power wells.
Fixes: 3c02934b24 ("drm/i915/tc/tgl: Implement TC cold sequences")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720232952.16228-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
After doing normal PHY-B initialization on Rocket Lake, we need to
manually copy some additional PHY-A register values into PHY-B
registers.
Note that the bspec's combo phy page doesn't specify that this
workaround is restricted to specific platform steppings (and doesn't
even do a very good job of specifying that RKL is the only platform this
is needed on), but the RKL workaround page lists this as relevant only
for A and B steppings, so I'm trusting that information for now.
v2: Make rkl_combo_phy_b_init_wa() static
v3:
- Minimize variables in WA function. (Jose)
- Fix timeout duration (usec vs msec). (Jose)
- Add verification of workaround. (Jose)
- Fix stepping bounds in comment.
Bspec: 49291
Bspec: 53273
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-6-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If HTI (also sometimes called HDPORT) is enabled at startup, it may be
using some of the PHYs and DPLLs making them unavailable for general
usage. Let's read out the HDPORT_STATE register and avoid making use of
resources that HTI is already using.
v2:
- Fix minor checkpatch warnings
v3:
- Just readout HDPORT_STATE register once during init and then parse it
later as needed.
- Add a 'has_hti' device info flag to track whether we should readout
HDPORT_STATE or not. We can skip the platform/flag tests later since
the hti_state in dev_priv will remain 0 for platforms it does not
apply to.
- Move PLL masking into icl_get_combo_phy_dpll() since at the moment
RKL is the only platform that has HTI. (Jose)
Bspec: 49189
Bspec: 53707
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-5-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rocket Lake has a third DPLL (called 'DPLL4') that must be used to
enable a third display. Unlike EHL's variant of DPLL4, the RKL variant
behaves the same as DPLL0/1. And despite its name, the DPLL4 registers
are offset as if it were DPLL2.
v2:
- Add new .update_ref_clks() hook.
v3:
- Renumber TBT PLL to '3' and switch _MMIO_PLL3 to _MMIO_PLL (Lucas)
v4:
- Don't drop _MMIO_PLL3; although it's now unused, we're going to need
it very soon again for upcoming DG1 patches. (Lucas)
v5:
- Don't re-number TBT PLL and beyond, just use new RKL_DPLL_CFGCR
macros to lookup the proper registers instead. Although renumbering
the PLLs might be something we want to consider down the road, it
opens a big can of worms right now since a bunch of places in the
code have an assumption that the PLL table has idx==id and no holes.
Renumbering creates a hole for TGL, so we'd either need to allow
holes in the table or break the idx==id invariant, both of which are
somewhat invasive changes to the design.
Bspec: 49202
Bspec: 49443
Bspec: 50288
Bspec: 50289
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-4-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It's silly to have if(SKL) checks in gen9_init_clock_gating() when
we can just move those bits into skl_init_clock_gating().
I'm not entirely convinced we even need this w/a, or if we do
then maybe we want it for kbl/cfl as well. IIRC it was only
listed in the wadb, but that is now dead so can't double check
anymore. Bspec doesn't seem to have any purely skl specific
DOP clock gating workarounds listed.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716190426.17047-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Hours Of Battery Life is a new GEN12+ power-saving feature that allows
supported motherboards to use a special voltage swing table for eDP
panels that uses less power.
So here if supported by HW, OEM will set it in VBT and i915 will try
to train link with HOBL vswing table if link training fails it fall
back to the original table.
intel_ddi_dp_preemph_max() was optimized to only check the HOBL flag
instead of do something like is done in intel_ddi_dp_voltage_max()
because it is only called after the first entry of the voltage swing
table was loaded so the HOBL flag is valid at that point.
v3:
- removed a few parameters of icl_ddi_combo_vswing_program() that
can be taken from encoder
v4:
- using the HOBL vswing table until training fails completely (Ville)
v5:
- not reducing lane or link rate when link training fails with HOBL
active
- duplicated the HOBL voltage swing entry to match DP spec requirement
v6:
- removed the optional VS 3 & pre-emp 0 from HOBL table
- changed from u8:1 to bool to store hobl_failed/active
BSpec: 49291
BSpec: 49399
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715175637.33763-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The value we program to DDI_BUF_CTL changes at the following places:
- At enabling/disabling the output to configure the port width etc, and
to enable/disable the DDI BUF function.
- At the beginning/end of link re-training to disable/re-enable the DDI
BUF function.
- On HSW/BDW/SKL to change the voltage swing/pre-emph levels.
Except of the above the value we program to the DDI_BUF_CTL register
(intel_dp->DP) doesn't change, so no need to reprogram the register when
changing the link training patterns (which is programmed via the
DP_TP_CTL register on DDI platforms).
v2:
- Fix the commit message wrt. voltage/pre-emph level values in
intel_dp->DP. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714153141.10280-2-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
According to BSpec this flag should not be changed while the DDI
function is enabled. On BDW+ the DP_TP_CTL register spec also states it
explicitly that the HW takes care of enabling/disabling the scrambling
for training patterns (and it must stay enabled for normal pixel
output). Assume that this HW automatic handling of scrambling is also
true for HSW.
BSpec: 8013, 7557, 50484
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714153141.10280-1-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently invalid CPU addresses are not being sanity checked resulting in
SATA setup failure on a SynQuacer SC2A11 development machine. The original
check was removed by and earlier commit, so add a sanity check back in
to avoid this regression.
Fixes: 7a8b64d17e ("of/address: use range parser for of_dma_get_range")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200817113208.523805-1-colin.king@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
See the SDM, volume 3, section 4.4.1:
If PAE paging would be in use following an execution of MOV to CR0 or
MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of
CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then
the PDPTEs are loaded from the address in CR3.
Fixes: b9baba8614 ("KVM, pkeys: expose CPUID/CR4 to guest")
Cc: Huaitong Han <huaitong.han@intel.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200817181655.3716509-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
See the SDM, volume 3, section 4.4.1:
If PAE paging would be in use following an execution of MOV to CR0 or
MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of
CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then
the PDPTEs are loaded from the address in CR3.
Fixes: 0be0226f07 ("KVM: MMU: fix SMAP virtualization")
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200817181655.3716509-2-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IA-64 is special and treats pgd_offset_k() differently to pgd_offset(),
using different formulae to calculate the indices into the kernel and user
PGDs. The index into the user PGDs takes into account the region number,
but the index into the kernel (init_mm) PGD always assumes a predefined
kernel region number. Commit 974b9b2c68 ("mm: consolidate pte_index() and
pte_offset_*() definitions") made IA-64 use a generic pgd_offset_k() which
incorrectly used pgd_index() for kernel page tables. As a result, the
index into the kernel PGD was going out of bounds and the kernel hung
during early boot.
Allow overrides of pgd_offset_k() and override it on IA-64 with the old
implementation that will correctly index the kernel PGD.
Fixes: 974b9b2c68 ("mm: consolidate pte_index() and pte_offset_*() definitions")
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Fix a kernel-doc warning for the pcs_config() function prototype:
../include/linux/phylink.h:406: warning: Excess function parameter 'permit_pause_to_mac' description in 'pcs_config'
Fixes: 7137e18f6f ("net: phylink: add struct phylink_pcs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Some devices have broken extension unit where getting current value
doesn't work. Attempt that once when creating mixer control for it. If
it fails, just ignore it, so that it won't cripple the device entirely
(and/or make the error floods).
Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Link: https://lore.kernel.org/r/5f3abc52.1c69fb81.9cf2.fe91@mx.google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If debug_regs.c is built with newer binutils, the resulting binary is "optimized"
by the assembler:
asm volatile("ss_start: "
"xor %%rax,%%rax\n\t"
"cpuid\n\t"
"movl $0x1a0,%%ecx\n\t"
"rdmsr\n\t"
: : : "rax", "ecx");
is translated to :
000000000040194e <ss_start>:
40194e: 31 c0 xor %eax,%eax <----- rax->eax?
401950: 0f a2 cpuid
401952: b9 a0 01 00 00 mov $0x1a0,%ecx
401957: 0f 32 rdmsr
As you can see rax is replaced with eax in target binary code.
This causes a difference is the length of xor instruction (2 Byte vs 3 Byte),
and makes the hard-coded instruction length check fail:
/* Instruction lengths starting at ss_start */
int ss_size[4] = {
3, /* xor */ <-------- 2 or 3?
2, /* cpuid */
5, /* mov */
2, /* rdmsr */
};
Encode the shorter version directly and, while at it, fix the "clobbers"
of the asm.
Cc: stable@vger.kernel.org
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vfio_iommu_replay() function does not currently unwind on error,
yet it does pin pages, perform IOMMU mapping, and modify the vfio_dma
structure to indicate IOMMU mapping. The IOMMU mappings are torn down
when the domain is destroyed, but the other actions go on to cause
trouble later. For example, the iommu->domain_list can be empty if we
only have a non-IOMMU backed mdev attached. We don't currently check
if the list is empty before getting the first entry in the list, which
leads to a bogus domain pointer. If a vfio_dma entry is erroneously
marked as iommu_mapped, we'll attempt to use that bogus pointer to
retrieve the existing physical page addresses.
This is the scenario that uncovered this issue, attempting to hot-add
a vfio-pci device to a container with an existing mdev device and DMA
mappings, one of which could not be pinned, causing a failure adding
the new group to the existing container and setting the conditions
for a subsequent attempt to explode.
To resolve this, we can first check if the domain_list is empty so
that we can reject replay of a bogus domain, should we ever encounter
this inconsistent state again in the future. The real fix though is
to add the necessary unwind support, which means cleaning up the
current pinning if an IOMMU mapping fails, then walking back through
the r-b tree of DMA entries, reading from the IOMMU which ranges are
mapped, and unmapping and unpinning those ranges. To be able to do
this, we also defer marking the DMA entry as IOMMU mapped until all
entries are processed, in order to allow the unwind to know the
disposition of each entry.
Fixes: a54eb55045 ("vfio iommu type1: Add support for mediated devices")
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
