Pull powerpc updates from Michael Ellerman:
- Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations
- Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and
use the -mprofile-kernel option (kernel specific ftrace ABI) for big
endian ELFv2 kernels
- Add initial Dynamic Execution Control Register (DEXCR) support, and
allow the ROP protection instructions to be used on Power 10
- Various other small features and fixes
Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean
Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry,
Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul
Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey,
Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König.
* tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits)
powerpc: remove checks for binutils older than 2.25
powerpc: Fail build if using recordmcount with binutils v2.37
powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory
powerpc/iommu: Only build sPAPR access functions on pSeries
powerpc: powernv: Annotate data races in opal events
powerpc: Mark writes registering ipi to host cpu through kvm and polling
powerpc: Annotate accesses to ipi message flags
powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention
powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid
powerpc: qspinlock: Enforce qnode writes prior to publishing to queue
powerpc: qspinlock: Mark accesses to qnode lock checks
powerpc/powernv/pci: Remove last IODA1 defines
powerpc/powernv/pci: Remove MVE code
powerpc/powernv/pci: Remove ioda1 support
powerpc: 52xx: Make immr_id DT match tables static
powerpc: mpc512x: Remove open coded "ranges" parsing
powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing
powerpc: fsl: Use of_property_read_reg() to parse "reg"
powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing
macintosh: Use of_property_read_reg() to parse "reg"
...
Pull LoongArch updates from Huacai Chen:
- preliminary ClangBuiltLinux enablement
- add support to clone a time namespace
- add vector extensions support
- add SMT (Simultaneous Multi-Threading) support
- support dbar with different hints
- introduce hardware page table walker
- add jump-label implementation
- add rethook and uprobes support
- some bug fixes and other small changes
* tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (28 commits)
LoongArch: Remove five DIE_* definitions in kdebug.h
LoongArch: Add uprobes support
LoongArch: Use larch_insn_gen_break() for kprobes
LoongArch: Add larch_insn_gen_break() to generate break insns
LoongArch: Check for AMO instructions in insns_not_supported()
LoongArch: Move three functions from kprobes.c to inst.c
LoongArch: Replace kretprobe with rethook
LoongArch: Add jump-label implementation
LoongArch: Select HAVE_DEBUG_KMEMLEAK to support kmemleak
LoongArch: Export some arch-specific pm interfaces
LoongArch: Introduce hardware page table walker
LoongArch: Support dbar with different hints
LoongArch: Add SMT (Simultaneous Multi-Threading) support
LoongArch: Add vector extensions support
LoongArch: Add support to clone a time namespace
Makefile: Add loongarch target flag for Clang compilation
LoongArch: Mark Clang LTO as working
LoongArch: Include KBUILD_CPPFLAGS in CHECKFLAGS invocation
LoongArch: vDSO: Use CLANG_FLAGS instead of filtering out '--target='
LoongArch: Tweak CFLAGS for Clang compatibility
...
The main kdb command parser only handles CR (ASCII 13 AKA '\r') today,
but not LF (ASCII 10 AKA '\n'). That means that the kdb command parser
can handle terminals that send just CR or that send CR+LF but can't
handle terminals that send just LF.
The fact that kdb didn't handle LF in the command parser tripped up a
tool I tried to use with it. Specifically, I was trying to send a
command to my device to resume it from kdb using a ChromeOS tool like:
dut-control cpu_uart_cmd:"g"
That tool only terminates lines with LF, not CR+LF.
Arguably the ChromeOS tool should be fixed. After all, officially kdb
seems to be designed such that CR+LF is the official line ending
transmitted over the wire and that internally a line ending is just
'\n' (LF). Some evidence:
* uart_poll_put_char(), which is used by kdb, notices a '\n' and
converts it to '\r\n'.
* kdb functions specifically use '\r' to get a carriage return without
a newline. You can see this in the pager where kdb will write a '\r'
and then write over the pager prompt.
However, all that being said there's no real harm in accepting LF as a
command terminator in the kdb parser and doing so seems like it would
improve compatibility. After this, I'd expect that things would work
OK-ish with a remote terminal that used any of CR, CR+LF, or LF as a
line ending. Someone using CR as a line ending might get some ugliness
where kdb wasn't able to overwrite the last line, but basic commands
would work. Someone using just LF as a line ending would probably also
work OK.
A few other notes:
- It can be noted that "bash" running on an "agetty" handles LF as a
line termination with no complaints.
- Historically, kdb's "pager" actually handled either CR or LF fine. A
very quick inspection would make one think that kdb's pager actually
could have paged down two lines instead of one for anyone using
CR+LF, but this is generally avoided because of kdb_input_flush().
- Conceivably one could argue that some of this special case logic
belongs in uart_poll_get_char() since uart_poll_put_char() handles
the '\n' => '\r\n' conversion. I would argue that perhaps we should
eventually do the opposite and move the '\n' => '\r\n' out of
uart_poll_put_char(). Having that conversion at such a low level
could interfere if we ever want to transfer binary data. In
addition, if we truly made uart_poll_get_char() the inverse of
uart_poll_put_char() it would convert back to '\n' and (ironically)
kdb's parser currently only looks for '\r' to find the end of a
command.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230628125612.1.I5cc6c3d916195f5bcfdf5b75d823f2037707f5dc@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Clean up the code to not have external function declarations
inside the C source files. Reduces warnings when compiled with W=1.
Signed-off-by: Helge Deller <deller@gmx.de>
Fix the STI console to be able to execute either the 64-bit STI ROM code
or the 32-bit STI ROM code.
This is necessary on 64-bit only machines (e.g. C8000 workstation) which
otherwise won't show the STI text console with HP graphic cards like
Visualize-FX5/FX10/FXe.
Note that when calling 32-bit code from a 64-bit kernel one needs to
copy contents on the CPU stack from high memory down below the 4GB
limit.
Tested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Some 64-bit machines require us to call the STI ROM in 64-bit mode, e.g.
with the VisFXe graphic card.
This patch allows drivers to use such 64-bit calling conventions.
Tested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
If neither a "hif_mspi" nor "mspi" resource is present, the driver will
just early exit in probe but still return success. Apart from not doing
anything meaningful, this would then also lead to a null pointer access
on removal, as platform_get_drvdata() would return NULL, which it would
then try to dereference when trying to unregister the spi master.
Fix this by unconditionally calling devm_ioremap_resource(), as it can
handle a NULL res and will then return a viable ERR_PTR() if we get one.
The "return 0;" was previously a "goto qspi_resource_err;" where then
ret was returned, but since ret was still initialized to 0 at this place
this was a valid conversion in 63c5395bb7 ("spi: bcm-qspi: Fix
use-after-free on unbind"). The issue was not introduced by this commit,
only made more obvious.
Fixes: fa236a7ef2 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com>
Link: https://lore.kernel.org/r/20230629134306.95823-1-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Niklāvs reported a boot regression on an Alderlake machine and bisected it
to commit 9df9d2f047 ("init: Invoke arch_cpu_finalize_init() earlier").
By moving the invocation of arch_cpu_finalize_init() further down he
identified that efi_enter_virtual_mode() is the function which causes the
boot hang.
The main difference of the earlier invocation is that the boot CPU is
already fully initialized and mitigations and alternatives are applied.
But the only really interesting change turned out to be IBT, which is now
enabled before efi_enter_virtual_mode(). "ibt=off" on the kernel command
line cured the problem.
Inspection of the involved calls in efi_enter_virtual_mode() unearthed that
efi_set_virtual_address_map() is the only place in the kernel which invokes
an EFI call without the IBT safe wrapper. This went obviously unnoticed so
far as IBT was enabled later.
Use arch_efi_call_virt() instead of efi_call() to cure that.
Fixes: fe379fa4d1 ("x86/ibt: Disable IBT around firmware")
Fixes: 9df9d2f047 ("init: Invoke arch_cpu_finalize_init() earlier")
Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217602
Link: https://lore.kernel.org/r/87jzvm12q0.ffs@tglx
If a client sends out a cap update dropping caps with the prior 'seq'
just before an incoming cap revoke request, then the client may drop
the revoke because it believes it's already released the requested
capabilities.
This causes the MDS to wait indefinitely for the client to respond
to the revoke. It's therefore always a good idea to ack the cap
revoke request with the bumped up 'seq'.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/61782
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In case:
mds client
- Releases cap and put Inode
- Increase cap->seq and sends
revokes req to the client
- Receives release req and - Receives & drops the revoke req
skip removing the cap and
then eval the CInode and
issue or revoke caps again.
- Receives & drops the caps update
or revoke req
- Health warning for client
isn't responding to
mclientcaps(revoke)
All the IMPORT/REVOKE/GRANT cap ops will increase the session seq
in MDS side and then the client need to issue a cap release to
unblock MDS to remove the corresponding cap to unblock possible
waiters.
Link: https://tracker.ceph.com/issues/61332
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The 'i_wr_ref' is used to track the 'Fb' caps, while whenever the 'Fb'
caps is took the kclient will always take the 'Fw' caps at the same
time. That means it will always be a false check in __ceph_finish_cap_snap().
When writing to buffer the kclient will take both 'Fb|Fw' caps and then
write the contents to the buffer pages by increasing the 'i_wrbuffer_ref'
and then just release both 'Fb|Fw'. This is different with the user
space libcephfs, which will keep the 'Fb' being took and use 'i_wr_ref'
instead of 'i_wrbuffer_ref' to track this until the buffer is flushed
to Rados.
We need to defer flushing the capsnap until the corresponding buffer
pages are all flushed to Rados, and at the same time just trigger to
flush the buffer pages immediately.
Link: https://tracker.ceph.com/issues/48640
Link: https://tracker.ceph.com/issues/59343
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For write requests the parent's mtime will be updated correspondingly.
And if the 'Xx' caps is issued and when releasing other caps together
with the write requests the MDS Locker will try to eval the xattr lock,
which need to change the locker state excl --> sync and need to do Xx
caps revocation.
Just voluntarily dropping CEPH_CAP_XATTR_EXCL caps to avoid a cap
revoke message, which could cause the mtime will be overwrote by stale
one.
[ idryomov: break unnecessarily long lines ]
Link: https://tracker.ceph.com/issues/61584
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When the msgs are corrupted we need to dump them and then it will
be easier to dig what has happened and where the issue is.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When the MDS rank is in clientreplay state, the metrics requests
will be discarded directly. Also, when there are a lot of known
client requests to recover from, the metrics requests will slow
down the MDS rank from getting to the active state sooner.
With this patch, we will send the metrics requests only when the
MDS rank is in active state.
Link: https://tracker.ceph.com/issues/61524
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Some system BIOS configuration may provide option to disable E-cores.
As part of this change, CPUID feature for hybrid (Leaf 7 sub leaf 0,
EDX[15] = 0) may not be set. But HWP performance limits will still be
using a scaling factor like any other hybrid enabled system.
The current check for applying scaling factor will fail when hybrid
CPUID feature is not set and the only way to make sure that scaling
should be applied by checking CPPC nominal frequency and nominal
performance.
First, or systems predating Alder Lake, the CPPC nominal frequency and
nominal performance are 0, which can be used to distinguish those
systems from hybrid systems with disabled E-cores.
Second, if the CPPC nominal frequency and nominal performance are
defined, which indicates the need to use a special scaling factor, and
the nominal performance value multiplied by 100 is not equal to the
nominal frequency one, use hybrid scaling factor.
This can be done for all HWP systems without additional CPU model check.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject and changelog edits, removal of unneeded parens, comment
edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As already mentioned in my merge message for the 'expand-stack' branch,
we have something like 24 different versions of the page fault path for
all our different architectures, all just _slightly_ different due to
various historical reasons (usually related to exactly when they
branched off the original i386 version, and the details of the other
architectures they had in their history).
And a few of them had some silly mistake in the conversion.
Most of the architectures call the faulting address 'address' in the
fault path. But not all. Some just call it 'addr'. And if you end up
doing a bit too much copy-and-paste, you end up with the wrong version
in the places that do it differently.
In this case it was csky.
Fixes: a050ba1e74 ("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
