Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter, no known blockers for
the release.
Current release - regressions:
- wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop(), fix
taking the lock before its initialized
- Bluetooth: mgmt: fix double free on error path
Current release - new code bugs:
- eth: ice: fix tunnel checksum offload with fragmented traffic
Previous releases - regressions:
- tcp: md5: fix IPv4-mapped support after refactoring, don't take the
pure v6 path
- Revert "tcp: change pingpong threshold to 3", improving detection
of interactive sessions
- mld: fix netdev refcount leak in mld_{query | report}_work() due to
a race
- Bluetooth:
- always set event mask on suspend, avoid early wake ups
- L2CAP: fix use-after-free caused by l2cap_chan_put
- bridge: do not send empty IFLA_AF_SPEC attribute
Previous releases - always broken:
- ping6: fix memleak in ipv6_renew_options()
- sctp: prevent null-deref caused by over-eager error paths
- virtio-net: fix the race between refill work and close, resulting
in NAPI scheduled after close and a BUG()
- macsec:
- fix three netlink parsing bugs
- avoid breaking the device state on invalid change requests
- fix a memleak in another error path
Misc:
- dt-bindings: net: ethernet-controller: rework 'fixed-link' schema
- two more batches of sysctl data race adornment"
* tag 'net-5.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
stmmac: dwmac-mediatek: fix resource leak in probe
ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr
net: ping6: Fix memleak in ipv6_renew_options().
net/funeth: Fix fun_xdp_tx() and XDP packet reclaim
sctp: leave the err path free in sctp_stream_init to sctp_stream_free
sfc: disable softirqs for ptp TX
ptp: ocp: Select CRC16 in the Kconfig.
tcp: md5: fix IPv4-mapped support
virtio-net: fix the race between refill work and close
mptcp: Do not return EINPROGRESS when subflow creation succeeds
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put
Bluetooth: Always set event mask on suspend
Bluetooth: mgmt: Fix double free on error path
wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop()
ice: do not setup vlan for loopback VSI
ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)
ice: Fix VSIs unable to share unicast MAC
ice: Fix tunnel checksum offload with fragmented traffic
ice: Fix max VLANs available for VF
netfilter: nft_queue: only allow supported familes and hooks
...
Instead of rather verbose comparison of current netdev->features bits vs
the incoming ones from user, let us compress them by a helper features
set that will be the result of netdev->features XOR features. This way,
current, extensive branches:
if (features & NETIF_F_BIT && !(netdev->features & NETIF_F_BIT))
set_feature(true);
else if (!(features & NETIF_F_BIT) && netdev->features & NETIF_F_BIT)
set_feature(false);
can become:
netdev_features_t changed = netdev->features ^ features;
if (changed & NETIF_F_BIT)
set_feature(!!(features & NETIF_F_BIT));
This is nothing new as currently several other drivers use this
approach, which I find much more convenient.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When trust is turned off for the VF, the expectation is that promiscuous
and allmulticast filters are removed. Currently default VSI filter is not
getting cleared in this flow.
Example:
ip link set enp236s0f0 vf 0 trust on
ip link set enp236s0f0v0 promisc on
ip link set enp236s0f0 vf 0 trust off
/* promiscuous mode is still enabled on VF0 */
Remove switch filters for both cases.
This commit fixes above behavior by removing default VSI filters and
allmulticast filters when vf-true-promisc-support is OFF.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In current implementation default VSI switch filter is only able to
forward traffic to a single VSI. This limits promiscuous mode with
private flag 'vf-true-promisc-support' to a single VF. Enabling it on
the second VF won't work. Also allmulticast support doesn't seem to be
properly implemented when vf-true-promisc-support is true.
Use standard ice_add_rule_internal() function that already implements
forwarding to multiple VSI's instead of constructing AQ call manually.
Add switch filter for allmulticast mode when vf-true-promisc-support is
enabled. The same filter is added regardless of the flag - it doesn't
matter for this case.
Remove unnecessary fields in switch structure. From now on book keeping
will be done by ice_add_rule_internal().
Refactor unnecessarily passed function arguments.
To test:
1) Create 2 VM's, and two VF's. Attach VF's to VM's.
2) Enable promiscuous mode on both of them and check if
traffic is seen on both of them.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The call to:
size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size);
will succeed if at least one byte is written to the "cmdbuf" buffer.
The "*ppos" value controls which byte is written. Another problem is
that this code does not check for errors so it's possible for the entire
buffer to be uninitialized.
Inintialize the struct to zero to prevent reading uninitialized stack
data.
Debugfs is normally only writable by root so the impact of this bug is
very minimal.
Fixes: 6cca83d498 ("Platform: OLPC: move debugfs support from x86 EC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YthIKn+TfZSZMEcM@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix error flow:
- Clean-up client object in case of probing failure.
- Prevent running remove routine in case of probing failure.
Probing and removing are invoked by hotplug events raised upon line
card insertion and removing. If probing procedure failed all data is
cleared and there is nothing to do in remove routine.
Fixes: 62f9529b8d ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220719153540.61304-1-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The ACC (automatic C-state conversion) feature was available on Sky Lake and
Cascade Lake Xeons (SKX and CLX), but it is not available on Ice Lake and
Sapphire Rapids Xeons (ICX and SPR). Therefore, stop decoding it for ICX and
SPR.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Sapphire Rapids Xeon (SPR) supports 2 flavors of PC6 - PC6N (non-retention) and
PC6R (retention). Before this patch we used ICX package C-state limits, which
was wrong, because ICX has only one PC6 flavor. With this patch, we use SKX PC6
limits for SPR, because they are the same.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The 'automatic_cstate_conversion_probe()' function has a too long 'if'
statement, convert it to a 'switch' statement in order to improve code
readability a bit.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Before this patch, SPR platform was considered identical to ICX platform. This
patch separates SPR support from ICX.
This patch is a preparation for adding SPR-specific package C-state limits
support.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The critclk_systems[] DMI match table already contains 2 Lex BayTrail
boards and patches were just submitted to add 3 more entries for the
following models: 3I380NX, 3I380A, 3I380CW.
Looking at: https://www.lex.com.tw/products/embedded-ipc-board/
we can see that Lex BayTrail makes many embedded boards with
multiple ethernet boards and none of their products are battery
powered so we don't need to worry (too much) about power consumption
when suspended.
Add a new DMI match which simply matches all Lex BayTrail boards and drop
the 2 existing board specific quirks.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reported-by: Michael Schöne <michael.schoene@rhebo.com>
Reported-by: Paul Spooren <paul.spooren@rhebo.com>
Reported-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Intel Performance Hybrid processors have a 2nd MSR
describing the turbo limits enforced on the Ecores.
Note, TRL and Secondary-TRL are usually R/O information,
but on overclock-capable parts, they can be written.
Signed-off-by: Len Brown <len.brown@intel.com>
When CONFIG_INTEL_UNCORE_FREQ_CONTROL is effective,
(Linux 5.9 and later), print the current (and default)
min and max uncore frequency limits.
When that driver provides the current uncore frequency
(Linux 5.18 and later), print a UncMHz column
reflecting the current uncore frequency.
Note that UncMHz is an instantaneous sample, not an average.
eg.
$ sudo ./turbostat -S --show frequency
...
Uncore Frequency pkg0 die0: 800 - 3900 MHz (800 - 3900 MHz)
...
Avg_MHz Busy% Bzy_MHz TSC_MHz UncMHz
28 0.70 4049 3095 3900
Signed-off-by: Len Brown <len.brown@intel.com>
Currently if a fscanf fails then an early return leaks an open
file pointer. Fix this by fclosing the file before the return.
Detected using static analysis with cppcheck:
tools/power/x86/turbostat/turbostat.c:2039:3: error: Resource leak: fp [resourceLeak]
Fixes: eae97e053f ("tools/power turbostat: Support thermal throttle count print")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Using strncmp for a single character comparison is overly complicated,
just use a simpler single character comparison instead. Also stops
static analyzers (such as cppcheck) from complaining about strncmp on
non-null terminated strings.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
It would be handy to have cmdline in turbostat output. For example,
according to the turbostat output, there are no C-states requested.
In this case the user is very curious if something like
intel_idle.max_cstate=0 was used, or may be idle=none too. It is
also curious whether things like intel_pstate=nohwp were used.
Print the boot command line accordingly:
turbostat version 21.05.04 - Len Brown <lenb@kernel.org>
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.16.0+ root=UUID=
b42359ed-1e05-42eb-8757-6bf2a1c19070 ro quiet splash vt.handoff=7
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The 82576 PTP implementation still uses .adjfreq instead of using the newer
.adjfine.
This implementation uses a pre-simplified calculation since the base
increment value for the 82576 is just 16 * 2^19. Converting this into
scaled_ppm is tricky, and makes the intent a bit less clear.
Simply convert to the normal flow of multiplying the base increment value
by the scaled_ppm and then dividing by 1000000ULL << 16. This can be
implemented using mul_u64_u64_div_u64 which can avoid the possible overflow
that might occur for large adjustments.
Use of .adjfine can improve the precision of small adjustments and gets us
one driver closer to removing the old implementation from the kernel
entirely.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now kvm_tdp_mmu_zap_leafs() only zaps leaf SPTEs but not any non-root
pages within that GFN range anymore, so the comment around it isn't
right.
Fix it by shifting the comment from tdp_mmu_zap_leafs() instead of
duplicating it, as tdp_mmu_zap_leafs() is static and is only called by
kvm_tdp_mmu_zap_leafs().
Opportunistically tweak the blurb about SPTEs being cleared to (a) say
"zapped" instead of "cleared" because "cleared" will be wrong if/when
KVM allows a non-zero value for non-present SPTE (i.e. for Intel TDX),
and (b) to clarify that a flush is needed if and only if a SPTE has been
zapped since MMU lock was last acquired.
Fixes: f47e5bbbc9 ("KVM: x86/mmu: Zap only TDP MMU leafs in zap range and mmu_notifier unmap")
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20220728030452.484261-1-kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the ixgbe PTP frequency adjustment implementations from .adjfreq to
.adjfine. This allows using the scaled parts per million adjustment from
the PTP core and results in a more precise adjustment for small
corrections.
To avoid overflow, use mul_u64_u64_div_u64 to perform the calculation. On
X86 platforms, this will use instructions that perform the operations with
128bit intermediate values. For other architectures, the implementation
will limit the loss of precision as much as possible.
This change slightly improves the precision of frequency adjustments for
all ixgbe based devices, and gets us one driver closer to being able to
remove the older .adjfreq implementation from the kernel.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The i40e driver currently implements the .adjfreq handler for frequency
adjustments. This takes the adjustment parameter in parts per billion. The
PTP core supports .adjfine which provides an adjustment in scaled parts per
million. This has a higher resolution and can result in more precise
adjustments for small corrections.
Convert the existing .adjfreq implementation to the newer .adjfine
implementation. This is trivial since it just requires changing the divisor
from 1000000000ULL to (1000000ULL << 16) in the mul_u64_u64_div_u64 call.
This improves the precision of the adjustments and gets us one driver
closer to removing the old .adjfreq support from the kernel.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The i40e device has a different clock rate depending on the current link
speed. This requires using a different increment rate for the PTP clock
registers. For slower link speeds, the base increment value is larger.
Directly multiplying the larger increment value by the parts per billion
adjustment might overflow.
To avoid this, the i40e implementation defaults to using the lower
increment value and then multiplying the adjustment afterwards. This causes
a loss of precision for lower link speeds.
We can fix this by using mul_u64_u64_div_u64 instead of performing the
multiplications using standard C operations. On X86, this will use special
instructions that perform the multiplication and division with 128bit
intermediate values. For other architectures, the fallback implementation
will limit the loss of precision for large values. Small adjustments don't
overflow anyways and won't lose precision at all.
This allows first multiplying the base increment value and then performing
the adjustment calculation, since we no longer fear overflowing. It also
makes it easier to convert to the even more precise .adjfine implementation
in a following change.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The PTP implementation for the e1000e driver uses the older .adjfreq
method. This method takes an adjustment in parts per billion. The newer
.adjfine implementation uses scaled_ppm. The use of scaled_ppm allows for
finer grained adjustments and is preferred over using the older
implementation.
Make use of mul_u64_u64_div_u64 in order to handle possible overflow of the
multiplication used to calculate the desired adjustment to the hardware
increment value.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The e1000e_phc_adjfreq function validates that the input delta is within
the maximum range. This is already handled by the core PTP code and this is
a duplicate and thus unnecessary check. It also complicates refactoring to
use the newer .adjfine implementation, where the input is no longer
specified in parts per billion. Remove the range validation check.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The PTP frequency adjustment code needs to determine an appropriate
adjustment given an input scaled_ppm adjustment.
We calculate the adjustment to the register by multiplying the base
(nominal) increment value by the scaled_ppm and then dividing by the
scaled one million value.
For very large adjustments, this might overflow. To avoid this, both the
scaled_ppm and divisor values are downshifted.
We can avoid that on X86 architectures by using mul_u64_u64_div_u64. This
helper function will perform the multiplication and division with 128bit
intermediate values. We know that scaled_ppm is never larger than the
divisor so this operation will never result in an overflow.
This improves the accuracy of the calculations for large adjustment values
on X86. It is likely an improvement on other architectures as well because
the default implementation of mul_u64_u64_div_u64 is smarter than the
original approach taken in the ice code.
Additionally, this implementation is easier to read, using fewer local
variables and lines of code to implement.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Treat the NX bit as valid when using NPT, as KVM will set the NX bit when
the NX huge page mitigation is enabled (mindblowing) and trigger the WARN
that fires on reserved SPTE bits being set.
KVM has required NX support for SVM since commit b26a71a1a5 ("KVM: SVM:
Refuse to load kvm_amd if NX support is not available") for exactly this
reason, but apparently it never occurred to anyone to actually test NPT
with the mitigation enabled.
------------[ cut here ]------------
spte = 0x800000018a600ee7, level = 2, rsvd bits = 0x800f0000001fe000
WARNING: CPU: 152 PID: 15966 at arch/x86/kvm/mmu/spte.c:215 make_spte+0x327/0x340 [kvm]
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022
RIP: 0010:make_spte+0x327/0x340 [kvm]
Call Trace:
<TASK>
tdp_mmu_map_handle_target_level+0xc3/0x230 [kvm]
kvm_tdp_mmu_map+0x343/0x3b0 [kvm]
direct_page_fault+0x1ae/0x2a0 [kvm]
kvm_tdp_page_fault+0x7d/0x90 [kvm]
kvm_mmu_page_fault+0xfb/0x2e0 [kvm]
npf_interception+0x55/0x90 [kvm_amd]
svm_invoke_exit_handler+0x31/0xf0 [kvm_amd]
svm_handle_exit+0xf6/0x1d0 [kvm_amd]
vcpu_enter_guest+0xb6d/0xee0 [kvm]
? kvm_pmu_trigger_event+0x6d/0x230 [kvm]
vcpu_run+0x65/0x2c0 [kvm]
kvm_arch_vcpu_ioctl_run+0x355/0x610 [kvm]
kvm_vcpu_ioctl+0x551/0x610 [kvm]
__se_sys_ioctl+0x77/0xc0
__x64_sys_ioctl+0x1d/0x20
do_syscall_64+0x44/0xa0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
---[ end trace 0000000000000000 ]---
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220723013029.1753623-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The commit 5413bcba7e ("KVM: x86: Add support for vICR APIC-write
VM-Exits in x2APIC mode") introduces logic to prevent APIC write
for offset other than ICR in kvm_apic_write_nodecode() function.
This breaks x2AVIC support, which requires KVM to trap and emulate
x2APIC MSR writes.
Therefore, removes the warning and modify to logic to allow MSR write.
Fixes: 5413bcba7e ("KVM: x86: Add support for vICR APIC-write VM-Exits in x2APIC mode")
Cc: Zeng Guang <guang.zeng@intel.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220725053356.4275-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD does not support APIC TSC-deadline timer mode. AVIC hardware
will generate GP fault when guest kernel writes 1 to bits [18]
of the APIC LVTT register (offset 0x32) to set the timer mode.
(Note: bit 18 is reserved on AMD system).
Therefore, always intercept and let KVM emulate the MSR accesses.
Fixes: f3d7c8aa6882 ("KVM: SVM: Fix x2APIC MSRs interception")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220725033428.3699-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change net device's MTU to smaller than IPV6_MIN_MTU or unregister
device while matching route. That may trigger null-ptr-deref bug
for ip6_ptr probability as following.
=========================================================
BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134
Read of size 4 at addr 0000000000000308 by task ping6/263
CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14
Call trace:
dump_backtrace+0x1a8/0x230
show_stack+0x20/0x70
dump_stack_lvl+0x68/0x84
print_report+0xc4/0x120
kasan_report+0x84/0x120
__asan_load4+0x94/0xd0
find_match.part.0+0x70/0x134
__find_rr_leaf+0x408/0x470
fib6_table_lookup+0x264/0x540
ip6_pol_route+0xf4/0x260
ip6_pol_route_output+0x58/0x70
fib6_rule_lookup+0x1a8/0x330
ip6_route_output_flags_noref+0xd8/0x1a0
ip6_route_output_flags+0x58/0x160
ip6_dst_lookup_tail+0x5b4/0x85c
ip6_dst_lookup_flow+0x98/0x120
rawv6_sendmsg+0x49c/0xc70
inet_sendmsg+0x68/0x94
Reproducer as following:
Firstly, prepare conditions:
$ip netns add ns1
$ip netns add ns2
$ip link add veth1 type veth peer name veth2
$ip link set veth1 netns ns1
$ip link set veth2 netns ns2
$ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1
$ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2
$ip netns exec ns1 ifconfig veth1 up
$ip netns exec ns2 ifconfig veth2 up
$ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1
$ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1
Secondly, execute the following two commands in two ssh windows
respectively:
$ip netns exec ns1 sh
$while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done
$ip netns exec ns1 sh
$while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done
It is because ip6_ptr has been assigned to NULL in addrconf_ifdown() firstly,
then ip6_ignore_linkdown() accesses ip6_ptr directly without NULL check.
cpu0 cpu1
fib6_table_lookup
__find_rr_leaf
addrconf_notify [ NETDEV_CHANGEMTU ]
addrconf_ifdown
RCU_INIT_POINTER(dev->ip6_ptr, NULL)
find_match
ip6_ignore_linkdown
So we can add NULL check for ip6_ptr before using in ip6_ignore_linkdown() to
fix the null-ptr-deref bug.
Fixes: dcd1f57295 ("net/ipv6: Remove fib6_idev")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220728013307.656257-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we close ping6 sockets, some resources are left unfreed because
pingv6_prot is missing sk->sk_prot->destroy(). As reported by
syzbot [0], just three syscalls leak 96 bytes and easily cause OOM.
struct ipv6_sr_hdr *hdr;
char data[24] = {0};
int fd;
hdr = (struct ipv6_sr_hdr *)data;
hdr->hdrlen = 2;
hdr->type = IPV6_SRCRT_TYPE_4;
fd = socket(AF_INET6, SOCK_DGRAM, NEXTHDR_ICMP);
setsockopt(fd, IPPROTO_IPV6, IPV6_RTHDR, data, 24);
close(fd);
To fix memory leaks, let's add a destroy function.
Note the socket() syscall checks if the GID is within the range of
net.ipv4.ping_group_range. The default value is [1, 0] so that no
GID meets the condition (1 <= GID <= 0). Thus, the local DoS does
not succeed until we change the default value. However, at least
Ubuntu/Fedora/RHEL loosen it.
$ cat /usr/lib/sysctl.d/50-default.conf
...
-net.ipv4.ping_group_range = 0 2147483647
Also, there could be another path reported with these options, and
some of them require CAP_NET_RAW.
setsockopt
IPV6_ADDRFORM (inet6_sk(sk)->pktoptions)
IPV6_RECVPATHMTU (inet6_sk(sk)->rxpmtu)
IPV6_HOPOPTS (inet6_sk(sk)->opt)
IPV6_RTHDRDSTOPTS (inet6_sk(sk)->opt)
IPV6_RTHDR (inet6_sk(sk)->opt)
IPV6_DSTOPTS (inet6_sk(sk)->opt)
IPV6_2292PKTOPTIONS (inet6_sk(sk)->opt)
getsockopt
IPV6_FLOWLABEL_MGR (inet6_sk(sk)->ipv6_fl_list)
For the record, I left a different splat with syzbot's one.
unreferenced object 0xffff888006270c60 (size 96):
comm "repro2", pid 231, jiffies 4294696626 (age 13.118s)
hex dump (first 32 bytes):
01 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 ....D...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000f6bc7ea9>] sock_kmalloc (net/core/sock.c:2564 net/core/sock.c:2554)
[<000000006d699550>] do_ipv6_setsockopt.constprop.0 (net/ipv6/ipv6_sockglue.c:715)
[<00000000c3c3b1f5>] ipv6_setsockopt (net/ipv6/ipv6_sockglue.c:1024)
[<000000007096a025>] __sys_setsockopt (net/socket.c:2254)
[<000000003a8ff47b>] __x64_sys_setsockopt (net/socket.c:2265 net/socket.c:2262 net/socket.c:2262)
[<000000007c409dcb>] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[<00000000e939c4a9>] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[0]: https://syzkaller.appspot.com/bug?extid=a8430774139ec3ab7176
Fixes: 6d0bfe2261 ("net: ipv6: Add IPv6 support to the ping socket.")
Reported-by: syzbot+a8430774139ec3ab7176@syzkaller.appspotmail.com
Reported-by: Ayushman Dutta <ayudutta@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220728012220.46918-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Local variable 'p' is initialized by an address
of field of acpi_resource structure, so it does
not make sense to compare 'p' with NULL.
Local variable 'io' is initialized by an address
of field of acpi_resource structure, so it does
not make sense to compare 'io' with NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Strachuk <strochuk@ispras.ru>
Link: https://lore.kernel.org/r/20220719110341.7239-1-strochuk@ispras.ru
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Change > MAX_DIE_PER_PACKAGE to >= MAX_DIE_PER_PACKAGE to prevent
accessing one element beyond the end of the array.
Fixes: 7fd786dfbd ("tools/power/x86/intel-speed-select: OOB daemon mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The cgroup_update_dfl_csses() function updates css associations when a
cgroup's subtree_control file is modified. Any changes made to a cgroup's
subtree_control file, however, will only affect its descendants but not
the cgroup itself. So there is no point in migrating csses associated
with that cgroup. We can skip them instead.
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Make UMIP an "allowed-1" bit CR4_FIXED1 MSR when KVM is emulating UMIP.
KVM emulates UMIP for both L1 and L2, and so should enumerate that L2 is
allowed to have CR4.UMIP=1. Not setting the bit doesn't immediately
break nVMX, as KVM does set/clear the bit in CR4_FIXED1 in response to a
guest CPUID update, i.e. KVM will correctly (dis)allow nested VM-Entry
based on whether or not UMIP is exposed to L1. That said, KVM should
enumerate the bit as being allowed from time zero, e.g. userspace will
see the wrong value if the MSR is read before CPUID is written.
Fixes: 0367f205a3 ("KVM: vmx: add support for emulating UMIP")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220607213604.3346000-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
