PD#172587
Problem:
tcon pll performance is not good when frac enabled with old setting
Solution:
update tcon pll setting
Verify:
x301
Change-Id: Ib5deb5c643afa243876c0e4703f835e503fffc2e
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-7324
Problem:
tvafe work abnormal when use vdin1 preview
Solution:
revert the previous commit for v4l2start/stop
Verify:
x301
This reverts commit 81c1e1449c.
Change-Id: I8cdefececb8b01cb86426684a6c700bc9bf8b615
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-7511
Problem:
no need enable vdin afbce under 4k,
it is no help for bandwidth with these resolution
Solution:
only enable vdin afbce for 4k resolution
Verify:
x301
Change-Id: I283efd872004846d158ef6c9addbd1e666d2f61a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Conflicts:
drivers/amlogic/media/vin/tvin/vdin/vdin_drv.c
PD#TV-4306
Problem:
vdin afbc will show green screen when hdmirx change dest_cfmt after stable
Solution:
dynamic config vdin afbc with cfmt
Verify:
x301
Change-Id: I404c47934f090222a2cdd7cf98b619826cd92cc7
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-6701
Problem:
Need vdin supprt for sm2
Solution:
add vdin support for tm2
Verify:
test pass on tm2 ab311
Change-Id: I57d7b3014938011d18c5e168f18c78e4fa542fc7
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Conflicts:
drivers/amlogic/media/vin/tvin/vdin/vdin_ctl.c
drivers/amlogic/media/vin/tvin/vdin/vdin_drv.c
drivers/amlogic/media/vin/tvin/viu/viuin.c
PD#SWPL-6277
Problem:
switch hdmi port maybe display green screen
Solution:
1.optimize vdin stop sequence, reduce afbc state polling interval,
and rest afbc to get a clean state
2.change vdin mif/afbc patch directly, not rdma method,
for vdin0/1 rdma are independent
Verify:
x301
Change-Id: I0ddf5d27dcfc0fd930eeb681f876c4c5e92e8d70
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-6196
Problem:
the memory issue cause to kernel crash.
Solution:
1. add flush cache when the mem oper end.
2. unmap addr which from vmap in vdin driver.
Verify:
X301
Change-Id: Id6efe2b009fe64ad753d51eb06784bd4e66f5e87
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
Conflicts:
drivers/amlogic/media/vin/tvin/vdin/vdin_afbce.c
PD#SWPL-3059
Problem:
vdin1 hisgram and screencap cannot be used simultaneously
Solution:
add vdin1 histgram,and make hist and screencap function to be compatible
Verify:
txlx r311
Change-Id: I759d1cdc69d59015ce845898990088eb6943cc41
Signed-off-by: xuhua zhang <xuhua.zhang@amlogic.com>
Conflicts:
drivers/amlogic/media/vin/tvin/vdin/vdin_drv.c
include/linux/amlogic/media/frame_provider/tvin/tvin.h
PD#SWPL-3964
Problem:
ATv channel switching crash
Solution:
stop vdin, close afbc
need judge platform, there is not afbce on txlx
Verify:
verify by einstein
Change-Id: Ibcff1da47b9fdca7e1758b0d45e7d6800bfc8080
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
PD#SWPL-2145
Problem:
HDMI Rx Video path display latency of Game mode and Normal mode
Solution:
optimize game mode
Verify:
T962X-R311
Change-Id: Ib0a41915dfb088495c976d56ab812f90e31602f4
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Conflicts:
drivers/amlogic/media/vin/tvin/vdin/vdin_drv.c
PD#SWPL-6028
Problem:
enable ftrce in ramoops for new dtbs
Solution:
enable ftrce in ramoops for new dtbs
Verify:
X301
Change-Id: I0643329a873a310d1078ebd898fec2d3cb75d43c
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
PD#SWPL-2297, PD#SWPL-5450, PD#TV-2311
Problem:
Fix ATV audio output noise when switching channels to play.
Solution:
1.Add the judgment of SNR to prevent the weak signal
from entering the OV mode.
2.Wait for the signal to be completely stable before OV detection.
3.OV detection is turned off by default,
and will be turned on again when non-standard signals are encountered.
4.The OV detection moves from afc timer to monitor.
5.Optimize detection of A2/FM.
6.atv demod ver: V2.08.
Verify:
verified by x301
Change-Id: I3064230472ce51e1192a2d08ef6cc6f4ba10abaa
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#TV-1549, PD#TV-2829, PD#TV-2830
Problem:
Fix non standard for analog signal.
Solution:
1.Add non standard config 3 for analog signal.
2.Fix non standard default value.
3.Fix audio control register an bits.
4.After correcting the frequency offset success,
reset tuner to prevent audio from identifying errors.
Verify:
verified by x301
Change-Id: I65335dbe9ce9dc66d4ccaae3c1ff591660790616
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-2295
Problem:
1.modify atv demod code for coverity.
2.add ntsc-m ring filter for t962x2.
3.merge code optimization from android l.
4.add tuner compatible info in dts for tuner debug.
Solution:
1.modify atv demod code for coverity.
2.add ntsc-m ring filter for t962x2.
3.merge code optimization from android l.
4.add tuner compatible info in dts for tuner debug.
Verify:
verified by einstein
Change-Id: I9696aa628315ee11f0c9dd279c7cc03797f04331
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/txlx_t962x_r314.dts
arch/arm64/boot/dts/amlogic/txlx_t962x_r314.dts
drivers/amlogic/atv_demod/atv_demod_access.c
drivers/amlogic/atv_demod/atv_demod_driver.c
drivers/amlogic/atv_demod/atv_demod_ops.c
drivers/amlogic/atv_demod/atvdemod_func.c
PD#SWPL-1636
Problem:
1.pc bad value in kernel panic after change source.
2.System crash down when change source.
Solution:
optimize atv demod code.
Verify:
verified by p321
Change-Id: I655d1253950475dfb49ae1b174597797000adb73
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Conflicts:
drivers/amlogic/atv_demod/atv_demod_ops.c
PD#SWPL-791
Problem:
Switch channel with the script lasts 14 hours, the ATV shows no signal.
Solution:
To avoid conflict, don't need to check the CLK
and PLL states in atv demod write and read function.
Verify:
verified by p321
Change-Id: I033c54f14541ed540dfce1b9c4e21d2b5a8b9487
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Conflicts:
drivers/amlogic/atv_demod/atv_demod_ops.c
PD#OTT-1204
Problem:
don't support dvp camera
Solution:
add dvp camera gc2145 camera driver
Verify:
test pass on U200
Change-Id: I5927d49a93952587af7bb460a5c405293d692153
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Conflicts:
MAINTAINERS
arch/arm/boot/dts/amlogic/g12a_s905d2_u200.dts
PD#OTT-1204
Problem:
don't support dvp camera
Solution:
add dvp camera gc2145 camera driver
Verify:
test pass on U200
Change-Id: I0451160d013cd15b32a11469926fe8be4c35c466
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Conflicts:
MAINTAINERS
arch/arm/boot/dts/amlogic/g12a_s905d2_u200.dts
drivers/amlogic/media/camera/common/vm.c
drivers/amlogic/media/camera/common/vm.h
drivers/amlogic/media/camera/gc2145.c
PD#SWPL-5836
Problem:
kernel panic when read cec reg
Solution:
remove func that might cause sleep in spinlock,
so as to avoid deadlock
Verify:
S805X-P241
Change-Id: I8394f69bdbeff6673c795a221c08ef76164c5bdb
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Conflicts:
drivers/amlogic/cec/hdmi_ao_cec.h
PD#SWPL-3715
Problem:
set startup to TV,when DVD power on,the platform
autoshutdown after enter HDMI source
Solution:
suspend condition is wrong when not in suspend mode.
Verify:
TL1 (X301_T962x2)
Change-Id: I057cfe6b9a7f5806fa54eac063c02a7e3dc0179e
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Conflicts:
drivers/amlogic/cec/hdmi_ao_cec.c
drivers/amlogic/cec/hdmi_ao_cec.h
PD#SWPL-418
Problem:
cec: support multi-logical address
Solution:
if working on multi-logical address, enable two ip
1.enable cec_a, cec_b
2.enable two interrupt
3.enable two pinmux oa_7, ao_8
4.cec_a only send all msg
5.cec_b only receive all msg
6.discard ceca broadcast msg
Verify:
r311
r321
p321
Change-Id: I1dc93429876ede951657102bcd7d41a500946719
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Conflicts:
drivers/amlogic/cec/hdmi_ao_cec.c
drivers/amlogic/media/vin/tvin/hdmirx/hdmi_rx_drv.h
PD#SWPL-418
Problem:
TXL can't bootup
Solution:
revert it
Verify:
p321
Revert "cec: for support multi-logical address [2/2]"
This reverts commit cc185dc81d.
Revert "cec: for support multi-logical address [1/2]"
This reverts commit b7922078ea.
Change-Id: I1cef0ac194464d75ffff3fe765f15b5f944406b2
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
Conflicts:
drivers/amlogic/cec/hdmi_ao_cec.c
PD#SWPL-7181
Problem:
switch to high-speed from hs200 failed for resume process.
Solution:
set tx_delay as 0 for legacy mode.
clear cfg_cmd_setup
Verify:
verify by TL1
Change-Id: I5dbb1bbc391da864464bf137837a2b0f54ccda42
Signed-off-by: Long Yu <long.yu@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/mesontl1.dtsi
arch/arm64/boot/dts/amlogic/mesontl1.dtsi
PD#SWPL-4130
Problem:
No ir learning function in current source code
Solution:
Provide two ways to use ir learning function
1. sysfs
/*start learning*/
echo 1 > /sys/class/remote/amremote/ir_learnning
/*get data*/
cat /sys/class/remote/amremote/learned_pulse
/*stop learning*/
echo 0 > /sys/class/remote/amremote/ir_learnning
2. ioctl
/*start/stop learnning 1/0*/
REMOTE_IOC_SET_IR_LEARING
/*get raw data*/
REMOTE_IOC_GET_RAW_DATA
Verify:
U200 and W400
Change-Id: Ibb03838402d9baa6e910b3162ffcc63b57048890
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Conflicts:
drivers/amlogic/input/remote/remote_meson.h
