- Add BT-Coex support to cfg80211
- Add private event logic to cfg80211 when FW hangs
- Reduce passive dwell time to 130 ms
- Fix proptx initialize fail issue
- Implement codes for WPS2.0 using cfg80211
- Clean any left virtual interfaces in primary dhd_stop context
- Skip waiting for rtnl_lock in cfg80211 callback if already taken
- Skip writing to file FW trap info
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
This patch introduces the helper of ehci_sync_mem to flush
qtd/qh into memory immediately on some ARM, so that HC can
see the up-to-date qtd/qh descriptor asap.
This patch fixs one performance bug on ARM Cortex A9 dual core
platform, which has been reported on quite a few ARM machines
(OMAP4, Tegra 2, snowball...), see details from link of
https://bugs.launchpad.net/bugs/709245.
The patch has been tested ok on OMAP4 panda A1 board, and the
performance of 'dd' over usb mass storage can be increased from
4~5MB/sec to 14~16MB/sec after applying this patch.
Change-Id: I7994c58a1001c7f46f13e09420328a3916bbfcef
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Commit 330605423c fixed l2cap conn establishment for non-ssp remote
devices by not setting HCI_CONN_ENCRYPT_PEND every time conn security
is tested (which was always returning failure on any subsequent
security checks).
However, this broke l2cap conn establishment for ssp remote devices
when an ACL link was already established at SDP-level security. This
fix ensures that encryption must be pending whenever authentication
is also pending.
Change-Id: I6876ea5134e90d1f3d0f84e8ed40b92977b3df64
Signed-off-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
This is basically a more generic respin of 23746a6 ("HID: magicmouse: ignore
'ivalid report id' while switching modes") which got reverted later by
c3a492.
It turns out that on some configurations, this is actually still the case
and we are not able to detect in runtime.
The device reponds with 'invalid report id' when feature report switching it
into multitouch mode is sent to it.
This has been silently ignored before 0825411ade ("HID: bt: Wait for ACK
on Sent Reports"), but since this commit, it propagates -EIO from the _raw
callback .
So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's
how the device reacts in normal mode.
Sad, but following reality.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022
Change-Id: Ice409708bb7bd1b43bd86adde121a353f8d03835
Reported-by: Chase Douglas <chase.douglas@canonical.com>
Reported-by: Jaikumar Ganesh <jaikumarg@android.com>
Tested-by: Chase Douglas <chase.douglas@canonical.com>
Tested-by: Jaikumar Ganesh <jaikumarg@android.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Turns out that some devices don't call the notifier chains
with NETDEV_UNREGISTER.
So now we only track up/down as the points for tracking
active/inactive transitions and saving the get_dev_stats().
Change-Id: I948755962b4c64150b4d04f294fb4889f151e42b
Signed-off-by: JP Abgrall <jpa@google.com>
Suspend attempts can abort when the FUSE daemon is already frozen
and a client is waiting uninterruptibly for a response, causing
freezing of tasks to fail.
Use the freeze-friendly wait API, but disregard other signals.
Change-Id: Icefb7e4bbc718ccb76bf3c04daaa5eeea7e0e63c
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Bug discovered by Jan Kara:
Finally, commit 1449032be1 returned back
the old IO submission code but apparently it forgot to return the old
handling of uninitialized buffers so we unconditionnaly call
block_write_full_page() without specifying end_io function. So AFAICS
we never convert unwritten extents to written in some cases. For
example when I mount the fs as: mount -t ext4 -o
nomblk_io_submit,dioread_nolock /dev/ubdb /mnt and do
int fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC, 0600);
char buf[1024];
memset(buf, 'a', sizeof(buf));
fallocate(fd, 0, 0, 16384);
write(fd, buf, sizeof(buf));
I get a file full of zeros (after remounting the filesystem so that
pagecache is dropped) instead of seeing the first KB contain 'a's.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change-Id: I349e4e807d2f8bc3573a5e1b2393212e00ca7650
Signed-off-by: Ken Sumrall <ksumrall@android.com>
If the console_lock was held while the system was rebooted, the messages
in the temporary logbuffer would not have propogated to all the console
drivers.
This force releases the console lock if it failed to be acquired.
Change-Id: I193dcf7b968be17966833e50b8b8bc70d5d9fe89
Signed-off-by: Dima Zavin <dima@android.com>
/proc/net/xt_qtaguid/ctrl will now show:
active tagged sockets: lines of "sock=%p tag=0x%llx (uid=%u)"
sockets_tagged, : the number of sockets successfully tagged.
sockets_untagged: the number of sockets successfully untagged.
counter_set_changes: ctrl counter set change requests.
delete_cmds: ctrl delete commands completed.
iface_events: number of NETDEV_* events handled.
match_found_sk: sk found in skbuff without ct assist.
match_found_sk_in_ct: the number of times the connection tracker found
a socket for us. This happens when the skbuff didn't have info.
match_found_sk_none: the number of times no sk could be determined
successfully looked up. This indicates we don't know who the
data actually belongs to. This could be unsolicited traffic.
Change-Id: I3a65613bb24852e1eea768ab0320a6a7073ab9be
Signed-off-by: JP Abgrall <jpa@google.com>
sockfd_put() risks sleeping.
So when doing a delete ctrl command, defer the sockfd_put() and
kfree() to outside of the spinlock.
Change-Id: I5f8ab51d05888d885b2fbb035f61efa5b7abb88a
Signed-off-by: JP Abgrall <jpa@google.com>
At times, it is necessary for boards to provide some additional information
as part of panic logs. Provide information on the board hardware as part
of panic logs.
It is safer to print this information at the very end in case something
bad happens as part of the information retrieval itself.
To use this, set global mach_panic_string to an appropriate string in the
board file.
Change-Id: Id12cdda87b0cd2940dd01d52db97e6162f671b4d
Signed-off-by: Nishanth Menon <nm@ti.com>
* Don't hold the sockets after tagging.
sockfd_lookup() does a get() on the associated file.
There was no matching put() so a closed socket could never be
freed.
* Don't rely on struct member order for tag_node
The structs that had a struct tag_node member would work with
the *_tree_* routines only because tag_node was 1st.
* Improve debug messages
Provide info on who the caller is. Use unsigned int for uid.
* Only process NETDEV_UP events.
* Pacifier: disable netfilter matching. Leave .../stats header.
Change-Id: Iccb8ae3cca9608210c417597287a2391010dff2c
Signed-off-by: JP Abgrall <jpa@google.com>
This change fixes two problems.
First, it ensures that the hid-multitouch driver does not incorrectly
map GenericDesktop usages that are intended for other applications,
such as a Mouse.
Second, it sets the appropriate input properties so that user-space
can distinguish TouchScreen devices (INPUT_PROP_DIRECT) from
TouchPad devices (INPUT_PROP_POINTER) and configure them accordingly.
Change-Id: I8c2d947929186ffe7cf04b37c76e29b9abecf8cb
Signed-off-by: jeffbrown@android.com
When an hidp connection is added for a boot protocol input
device, don't release a device reference that was never
acquired. The device reference is acquired when the session
is linked to the session list (which hasn't happened yet when
hidp_setup_input is called).
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
When an hidp connection is added for a boot protocol input
device, only free the allocated device if device registration fails.
Subsequent failures should only unregister the device (the input
device api documents that unregister will also free the allocated
device).
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Once the session thread is running, cleanup must be
handled by the session thread only.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Commit f4d7cd4a4c introduced the usage of kthread API.
kthread_stop is a blocking function which returns only when
the thread exits. In this case, the thread can't exit because it's
waiting for the write lock, which is being held by bnep_del_connection()
which is waiting for the thread to exit -- deadlock.
Use atomic_t/wake_up_process instead to signal to the thread to exit.
Signed-off-by: Jaikumar Ganesh <jaikumar@google.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
No command should be send before Command Complete event for HCI
reset is received. This fix regression introduced by commit
6bd32326cda(Bluetooth: Use proper timer for hci command timout)
for chips whose reset command takes longer to complete (e.g. CSR)
resulting in next command being send before HCI reset completed.
Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Use DEBUG_WAKEUP flag to show wakelocks that abort suspend, in
addition to showing wakelocks held during system resume.
DEBUG_WAKEUP is enabled by default.
Change-Id: If6fa68e8afbc482a5300ffab2964694b02b34f41
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Some otg_id handlers can detect what's connected but can't detect a change.
This allows that handler to pass off the waiting for ID change to a proxy.
Change-Id: Ib38b750c3da4bffc35e37b620ecee37c5d64d31f
Signed-off-by: Erik Gilling <konkers@android.com>
* Allow tracking interfaces that only have an ipv6 address.
Deal with ipv6 notifier chains that do NETDEV_UP without the rtnl_lock()
* Allow root all access to procfs ctrl/stats.
To disable all checks:
echo 0 > /sys/module/xt_qtaguid/parameters/ctrl_write_gid
echo 0 > /sys/module/xt_qtaguid/parameters/stats_readall_gid
* Add CDEBUG define to enable pr_debug output specific to
procfs ctrl/stats access.
Change-Id: I9a469511d92fe42734daff6ea2326701312a161b
Signed-off-by: JP Abgrall <jpa@google.com>
* Added support for sets of counters.
By default set 0 is active.
Userspace can control which set is active for a given UID by
writing to .../ctrl
s <set_num> <uid>
Changing the active set is only permitted for processes in the
AID_NET_BW_ACCT group.
The active set tracking is reset when the uid tag is deleted with
the .../ctrl command
d 0 <uid>
* New output format for the proc .../stats
- Now has cnt_set in the list.
"""
idx iface acct_tag_hex uid_tag_int cnt_set rx_bytes rx_packets tx_bytes tx_packets rx_tcp_packets rx_tcp_bytes rx_udp_packets rx_udp_bytes rx_other_packets rx_other_bytes tx_tcp_packets tx_tcp_bytes tx_udp_packets tx_udp_bytes tx_other_packets tx_other_bytes
...
2 rmnet0 0x0 1000 0 27729 29 1477 27 27501 26 228 3 0 0 1249 24 228 3 0 0
2 rmnet0 0x0 1000 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 rmnet0 0x0 10005 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 rmnet0 0x0 10005 1 46407 57 8008 64 46407 57 0 0 0 0 8008 64 0 0 0 0
...
6 rmnet0 0x7fff000100000000 10005 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
6 rmnet0 0x7fff000100000000 10005 1 27493 24 1564 22 27493 24 0 0 0 0 1564 22 0 0 0 0
"""
* Refactored for proc stats output code.
* Silenced some of the per packet debug output.
* Reworded some of the debug messages.
* Replaced all the spin_lock_irqsave/irqrestore with *_bh():
netfilter handling is done in softirq.
Change-Id: Ibe89f9d754579fd97335617186c614b43333cfd3
Signed-off-by: JP Abgrall <jpa@google.com>
-- init rb nodes in ion_handle_create
-- in ion_handle_destroy, check that a node belongs to a tree before removing
it (safety check, does not happen right now)
-- mark as static functions used only inside ion.c
-- update comments to ion_share() with a relevant blurb from the implementation
-- other minor updates/typo fixes to comments
Signed-off-by: Iliyan Malchev <malchev@google.com>
L2CAP connection timeout needs to be assigned as miliseconds
and not as jiffies.
Signed-off-by: Chen Ganir <chen.ganir@ti.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
If the wakelock driver aborts suspend due to an already-held
wakelock, don't report the next wakelock held as the "wake up
wakelock".
Change-Id: I582ffbb87a3c361739a77d839a0c62921cff11a6
Signed-off-by: Todd Poynor <toddpoynor@google.com>
* Sends event/data packets to kernel while net_device interface
has not been created or registered yet
* Timer gets freed twice
* The primary net_device interface never gets freed
* Memory corruption in scan buffer
* Memory corruption in cfg80211 wiphy structure fix for kthred_stop crash
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
commit 286f367dad upstream.
Avoid dereferencing a NULL pointer if the number of feature arguments
supplied is fewer than indicated.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit 762a80d9fc upstream.
This patch makes dm-snapshot flush disk cache when writing metadata for
merging snapshot.
Without cache flushing the disk may reorder metadata write and other
data writes and there is a possibility of data corruption in case of
power fault.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
