According to DesignWare DoC file, CardThreshold bit should be
bit[27:16].
So it's correct to use (0xFFF << 16), not (0x1FFF << 16).
Change-Id: I184fff75e6e72624a22cdfc6b0ffcc236ffb07c2
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Vmode is a flag with bit mask, we can't judge interlace mode
from equal compare, need mask its bit.
Change-Id: Iad69bd52173c5ea179639deaff25f9a4ed3fc5d3
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Vmode is a flag with bit mask, we can't judge interlace mode
from equal compare, need mask its bit.
Change-Id: I0cc53503198f98dc58369f4c9e6dd78b47095968
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
rk3288 gpio bank0 only has 24 pins not 32 pins,so modify the gpio map
method for rk3288.
Change-Id: I1d59b25d9acb0f51f9a1ad8ec74db2952534b1f2
Signed-off-by: ZhongYichong <zyc@rock-chips.com>
As stated by the eMMC 5.0 specification, a chip should not be rejected
only because of the revision stated in the EXT_CSD_REV field of the
EXT_CSD register.
Remove the control on this value, the control of the CSD_STRUCTURE field
should be sufficient to reject future incompatible changes.
Change-Id: Ib69314bee902a4036183ef9a3565d9f0423ec971
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
This is just add psci code into kernel, if you want to enable psci,
you must add psci=enable in the Command Line.
Change-Id: Iaf0e0116cbaba0d210cb99d59c0ee82768bf54bb
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>
The power off sequence is behind of i2c bus shutdown func,
it would prevent the rk818 to do power off action. The irq was
disabled when rk818 power off, it could let rk818 to power off
through i2c bus.
Change-Id: Ia6155f137ab2fa36dbe19e06878b0228670b1398
Signed-off-by: David Wu <wdc@rock-chips.com>
android HDMI CEC HAL need to know cec state when resume,
so we add the HDMI_IOCTL_CECWAKESTATE.
Change-Id: Iff942c6085d10891200cd873cc2ba53e9a2d6cad
Signed-off-by: Shen Zhenyi <szy@rock-chips.com>
if the chip was rk3288, it didn't use pinctrl-rk3368.c,
but pinctrl-rockchip.c, driver of pinctrl-rk3368 was not registered.
It would make the NULL pointer at pinctrl-rk3368 suspend func.
Change-Id: I09dd4fb9b8bf001a4222ed9bef62347785b9906f
Signed-off-by: David Wu <wdc@rock-chips.com>
Add ion ioctl command -ION_IOC_SET_SECURED
for user to set memory region secured.
Change-Id: Ic4a7432ab8d2fd9f60fdfe7457e92f7c99768e12
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Add function "psci_set_memory_secure" for device to set memory
region secured.
Change-Id: Ife807c91d37ae66a5e1a0a3d8263c68cd601937d
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Add ion node, with two memory reserved region,
cma-heap and system-heap
Change-Id: Ic6c4da56e0c608135653f901f37adfed7bc7cb15
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
In Android-M, below change in bionic was introduced
https://android-review.googlesource.com/122131
Which caused lot of SELinux denials to be logged regarding
module_request (similar to below one) for 32bit systems,
There is quite a lot of module_request denials when any 32bit
executable is executed.
type=1400 audit(946685139.719:12): avc: denied { module_request }
for pid=1970 comm="tzdatacheck" kmod="personality-8"
scontext=u:r:tzdatacheck:s0 tcontext=u:r:kernel:s0 tclass=system
permissive=1
So we patch the kernel to not attempt module loading for alternate
execution environments.
Change-Id: I7bd2c5fc08fd00fa7ff53d3ced401564b474fad4
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
Even though 1MB is reserved for descriptor table in IDMAC,
the dw_mmc host driver is allowed to receive only maximum
128KB block length in one request. This is caused by setting
improper max_blk_count. It needs to be e adjusted so that
descriptor table is used fully. It is found that the performance
is improved with the increased the max_blk_count.
Change-Id: Ie4042f9e1924e0f575b9865aa721b7b61305c13d
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Checking if the uid_entry->uid matches the uid intended to be removed will
prevent deleting unwanted uid_entry.
Type cast the key for the hashtable to the same size, as when they were
inserted. This will make sure that we can find the uid_entry we want.
Bug: 25195548
Change-Id: I567942123cfb20e4b61ad624da19ec4cc84642c1
Signed-off: Ruchi kandoi <kandoiruchi@google.com>
(cherry picked from commit 170458885df2e4e081d3f8489cfd4f66a9598995)
This reverts commit ebce7cd30b.
This ends up doing more damage than good on most devices. Go back to
using a standard mutex.
(cherry picked from commit ea93186577de4fae3a2273c296bfcf1839048df0)
SYN_RECV & TIMEWAIT sockets are not full blown, they do not have a pinet6
pointer.
Bug: 24163529
Change-Id: I6ce67a190d67d200c6ebeb81d2daeb9c86cd7581
Fixes: ca6fb06518 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
(cherry picked from commit feee3c175c23ae72ed17154caaa82a3002de0023)
We have many places where we want to check if a socket is
not a timewait or request socket. Use a helper to avoid
hard coding this.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[backported from net-next 1d0ab25387]
[lorenzo@google.com: removed TCPF_NEW_SYN_RECV, and added a comment to add it back.]
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Bug: 24163529
Change-Id: Ibf09017e1ab00af5e6925273117c335d7f515d73
(cherry picked from commit cdab04e3612c55f0906c84c3c05996a0507eab7d)
