- Don't bind until all required functions have registered
- Consider multi-instance functions when matching products
Change-Id: I6fa10567db71d49cd81968c01d75e326ff9a17c8
Signed-off-by: John Michelau <john.michelau@motorola.com>
Since 2.6.36, spin_lock_bh has been added to dev_txq_stats_fold. So
dev_get_stats cannot be called from atomic context.
Replaced it by netdev_stats_to_stats64 to copy the stats directly. This
will work if the device driver does not need txq tx stats folding.
http://lkml.org/lkml/2010/9/20/250
Change-Id: I715b00892beda56cc369139d6e2bdc9efb6bfe79
Signed-off-by: Benoit Goby <benoit@android.com>
Send zero length packets at end of transfers that are a multiple of the
bulk max packet size as required by MTP.
Signed-off-by: Mike Lockwood <lockwood@android.com>
For backward compatibility with PTP, MTP is limited to a 32-bit file size.
When transferring files greater than 4 gig, MTP uses 0xFFFFFFFF as the file size
and the receiver reads until it receives a short packet.
Expanded size of mtp_file_range.length to 64 bits and added support for
writing zero length packets.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Returning number of bytes transfered does not work for files > 2 gig
since ioctl() result is a signed integer.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Use a work queue instead of a separate thread for file transfer ioctls
(note: the file transfer must be done on a kernel thread rather than in
process context so vfs_read and vfs_write will use the correct address space
for the buffers)
Enforce requirement that only one ioctl call may be active at a time,
and remove mutex in mtp_send_event that is now no longer necessary.
Synchronize around use of shared variables to avoid SMP issues
Fix mismatched calls to fget and fput
Signed-off-by: Mike Lockwood <lockwood@android.com>
Remove USB_CONFIG_ATT_WAKEUP from bmAttributes as we don't
support remote wakeup. This fixes an issue with the USB 2.0
compliance test tool.
Change-Id: Ic15e44710069f3f05ace6a82bbfa2b85a3649027
Signed-off-by: Benoit Goby <benoit@android.com>
Use this rather than calling usb_gadget_disconnect and usb_gadget_connect
directly to avoid sending USB disconnect events to userspace when resetting
the bus.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Add switch to notify current USB configuration. This can be used to detect
USB connect and disconnect events.
Broadcast a change via the usb_composite class when a USB function is
enabled or disabled.
Rename usb_function.hidden to usb_function.disabled.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Integrate support for android composite driver and platform data
within CONFIG_USB_ANDROID_MASS_STORAGE.
Signed-off-by: Mike Lockwood <lockwood@android.com>
As part of formating the mass storage device, Host sends the INQUIRY
scsi command. As per the standard, the command length for this
command should be 6 bytes, whereas the Vista host sends 12 bytes.
When the command length of the command is not equal to the standard
length, the device sends a phase error as part of the status phase.
When the host receives a phase error, it re-enumerates, hence the
error.
If the command is INQUIRY, and the command length is 12 bytes,
treating this as a good command and not sending the phase error
to the host fixes this issue.
Signed-off-by: Velempati Chiranjeevi <c_cvelem@qualcomm.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
Pulling in some code from file_storage.c, we now handle interface changes
in do_set_config(), which is now not called until any pending requests have
been successfully completed or cancelled.
This fixes a race condition that resulted in usb_ep_free_request() being called
while the request is still busy.
Signed-off-by: Mike Lockwood <lockwood@android.com>
The old code did not allways disable interrupts when called from thread
context, but tried to lock the same spinlock from interrupt context.
This was merged from a change to drivers/usb/function/mass_storage.c
in the android-msm-2.6.29 branch.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
This fixes a load ordering issue that occurred if a function driver loads before
the android gadget driver is initialized.
Signed-off-by: Mike Lockwood <lockwood@android.com>
This avoids excessive caching at the block level layer when copying large
files to the storage device.
Signed-off-by: Mike Lockwood <lockwood@android.com>
gether_disconnect() is always called before gether_connect() by the different
USB ethernet functions, so this warning was firing during normal operation.
Change-Id: I178cc7d1f67e9e87ac2e99c6674c4db8fcddf4a0
Signed-off-by: Mike Lockwood <lockwood@android.com>
Only set device descriptor bDeviceClass field to USB_CLASS_COMM when
the RNDIS function is actually enabled.
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: f_mass_storage: use dev_set_name()
Replacing strcpy() to device->bus_id which no longer exists in 2.6.32
Change-Id: Id978c881f457044c750bfd62f4c5bcc35bcd4fc5
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: f_adb: Claim endpoints so they are not reused by another function.
Change-Id: Ic9536cca800162e701c81cab36054f51ea759b72
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: f_acm: Fix crashes in acm_set_alt()
Change-Id: I91b761d392f8b1ca8784c69069b43e402b90d6a4
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: f_acm: Include android code only if CONFIG_USB_ANDROID_ACM is set.
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: Android support for RNDIS serial ethernet function.
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: android: Add function name to android_register_function printk.
Change-Id: I38bf79d9b544cdeaec9385f7482a131417fc4b23
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: android gadget: add remote wakeup attribute to android function
Add remote wakeup attribute to configuration descriptor of android
function to advertise remote wakeup capability to host
Acked-by: Allam, Suresh Reddy <sallam@qualcomm.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: android: Allow functions to handle setup requests.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Support for specifying the list of USB functions from platform data.
The main android.c gadget driver no longer has hard coded references
to the mass_storage and adb functions.
Support for computing the product ID based on tables in platform data
and the currently enabled functions.
Moved the adb enable/disable logic from android.c to f_adb.c.
Change-Id: I6259d3fb1473ed973f700e55d17744956f3527bb
Signed-off-by: Mike Lockwood <lockwood@android.com>
Change-Id: I4101540916b73a5f4e48684727ff782f98b969c7
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: android gadget: add remote wakeup attribute to android function
Add remote wakeup attribute to configuration descriptor of android
function to advertise remote wakeup capability to host
Acked-by: Allam, Suresh Reddy <sallam@qualcomm.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb gadget: link fixes for android composite gadget
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb gadget: Fix null pointer errors in android composite driver
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: android: Allow usb charging to draw up to 500mA instead of 250.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
usb gadget: android: Add helper function for usb_gadget_connect and disconnect.
Signed-off-by: Mike Lockwood <lockwood@android.com>
drivers: usb: gadget: call switch_dev_unregister in mass storage unbind callback
This fixes a problem unloading the android gadget driver when built as a module
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: android: Add dependency on switch driver.
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: android: Fix USB WHQL Certification Issues
Submitted on behalf of RaviKumar Vembu <ravi.v@motorola.com>
Signed-off-by: Jared Suttles <jared.suttles@motorola.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
drivers: usb: gadget: Add "usb_mass_storage" platform driver.
This will be used for configuring vendor, product and release from board file.
Submitted on behalf of RaviKumar Vembu <ravi.v@motorola.com>
Signed-off-by: Jared Suttles <jared.suttles@motorola.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
drivers: usb: gadget: Use usb_mass_storage platform device as parent for lun
If a platform device is specified for the f_mass_storage function, use it as the
parent driver for the lun files in sysfs.
This allows a platform independent file path for controlling USB mass storage
from user space.
Signed-off-by: Mike Lockwood <lockwood@android.com>
drivers: usb: gadget: Add platform data struct for usb_mass_storage device
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: mass_storage: Fix Mass Storage Panic during PC reboot
Submitted on behalf of RaviKumar Vembu <ravi.v@motorola.com>
Signed-off-by: Jared Suttles <jared.suttles@motorola.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: f_mass_storage: Handle setup request correctly
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: f_mass_storage: Clean up wakelocks on error paths
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
A card driver can now specify that the underlying bus should *not*
auto-resume with the rest of the system. This is useful for reducing resume
latency as well as saving power when the card driver is not using the
bus. In the future, we'll add support for manual suspend
Signed-off-by: San Mehat <san@google.com>
