IORING_SETUP_R_DISABLED rings don't have the submitter task set, so
it's not always safe to use ->submitter_task. Disallow posting msg_ring
messaged to disabled rings. Also add task NULL check for loosy sync
around testing for IORING_SETUP_R_DISABLED.
Cc: stable@vger.kernel.org
Fixes: 6d043ee116 ("io_uring: do msg_ring in target task via tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a couple of problems with queueing a tw in io_msg_ring_data()
for remote execution. First, once we queue it the target ring can
go away and so setting IORING_SQ_TASKRUN there is not safe. Secondly,
the userspace might not expect IORING_SQ_TASKRUN.
Extract a helper and uniformly use TWA_SIGNAL without TWA_SIGNAL_NO_IPI
tricks for now, just as it was done in the original patch.
Cc: stable@vger.kernel.org
Fixes: 6d043ee116 ("io_uring: do msg_ring in target task via tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit b4fbf0b27f, reversing
changes made to 6c977c5c2e.
This seems like net-next material.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently it is possible that the final put of a KVM reference comes from
vfio during its device close operation. This occurs while the vfio group
lock is held; however, if the vfio device is still in the kvm device list,
then the following call chain could result in a deadlock:
VFIO holds group->group_lock/group_rwsem
-> kvm_put_kvm
-> kvm_destroy_vm
-> kvm_destroy_devices
-> kvm_vfio_destroy
-> kvm_vfio_file_set_kvm
-> vfio_file_set_kvm
-> try to hold group->group_lock/group_rwsem
The key function is the kvm_destroy_devices() which triggers destroy cb
of kvm_device_ops. It calls back to vfio and try to hold group_lock. So
if this path doesn't call back to vfio, this dead lock would be fixed.
Actually, there is a way for it. KVM provides another point to free the
kvm-vfio device which is the point when the device file descriptor is
closed. This can be achieved by providing the release cb instead of the
destroy cb. Also rename kvm_vfio_destroy() to be kvm_vfio_release().
/*
* Destroy is responsible for freeing dev.
*
* Destroy may be called before or after destructors are called
* on emulated I/O regions, depending on whether a reference is
* held by a vcpu or other kvm component that gets destroyed
* after the emulated I/O.
*/
void (*destroy)(struct kvm_device *dev);
/*
* Release is an alternative method to free the device. It is
* called when the device file descriptor is closed. Once
* release is called, the destroy method will not be called
* anymore as the device is removed from the device list of
* the VM. kvm->lock is held.
*/
void (*release)(struct kvm_device *dev);
Fixes: 421cfe6596 ("vfio: remove VFIO_GROUP_NOTIFY_SET_KVM")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20230114000351.115444-1-mjrosato@linux.ibm.com
Link: https://lore.kernel.org/r/20230120150528.471752-1-yi.l.liu@intel.com
[aw: update comment as well, s/destroy/release/]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
V3U is actually gen4, not gen3. The same IP is also used in the
(not-yet-supported) V4H.
Change VI6_IP_VERSION_MODEL_VSPD_V3U to VI6_IP_VERSION_MODEL_VSPD_GEN4,
to represent the model correctly. V3U and V4H can still be
differentiated, if needed, with the VI6_IP_VERSION_SOC_xxx.
Also mark VI6_IP_VERSION_MODEL_VSPD_GEN4 as gen 4 in vsp1_device_info,
and update the code to correctly match for gen 4.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)"
* tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme:
nvme-pci: fix timeout request state check
nvme-apple: only reset the controller when RTKit is running
nvme-apple: reset controller during shutdown
HSA/HBP/HFP/HSE mode bits in Processor Reference Manuals specify
a naming conversion as 'disable mode bit' due to its bit definition,
0 = Enable and 1 = Disable.
For HSE bit, the i.MX 8M Mini/Nano/Plus Applications Processor
Reference Manual named this bit as 'HseDisableMode' but the bit
definition is quite opposite like
0 = Disables transfer
1 = Enables transfer
which clearly states that HSE is not a disable bit.
HSE is named as per the manual even though it is not a disable
bit however the driver logic for handling HSE is based on the
MIPI_DSI_MODE_VIDEO_HSE flag itself.
Cc: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212145745.15387-2-jagan@amarulasolutions.com
The initial default value of 0 for tp->rate_app_limited was incorrect,
since a flow is indeed application-limited until it first sends
data. Fixing the default to be 1 is generally correct but also
specifically will help user-space applications avoid using the initial
tcpi_delivery_rate value of 0 that persists until the connection has
some non-zero bandwidth sample.
Fixes: eb8329e0a0 ("tcp: export data delivery rate")
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The srcvm parameter of qcom_scm_assign_mem is a pointer to a bitfield of
VMIDs. The bitfield is updated with which VMIDs have permissions
after the qcom_scm_assign_mem call. This makes it simpler for clients to
make qcom_scm_assign_mem calls later, they always pass in same srcvm
bitfield and do not need to closely track whether memory was originally
shared.
When restoring permissions to HLOS, fastrpc is incorrectly using the
first VMID directly -- neither the BIT nor the other possible VMIDs the
memory was already assigned to. We already have a field intended for
this purpose: "perms" in the struct fastrpc_channel_ctx, but it was
never used. Start using the perms field.
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Vamsi Krishna Gattupalli <quic_vgattupa@quicinc.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: e90d911906 ("misc: fastrpc: Add support to secure memory map")
Fixes: 0871561055 ("misc: fastrpc: Add support for audiopd")
Fixes: 532ad70c6d ("misc: fastrpc: Add mmap request assigning for static PD pool")
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
drivers/misc/fastrpc.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
Link: https://lore.kernel.org/r/20230112182313.521467-1-quic_eberman@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is possible that in between calling fastrpc_map_get() until
map->fl->lock is taken in fastrpc_free_map(), another thread can call
fastrpc_map_lookup() and get a reference to a map that is about to be
deleted.
Rewrite fastrpc_map_get() to only increase the reference count of a map
if it's non-zero. Propagate this to callers so they can know if a map is
about to be deleted.
Fixes this warning:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 5 PID: 10100 at lib/refcount.c:25 refcount_warn_saturate
...
Call trace:
refcount_warn_saturate
[fastrpc_map_get inlined]
[fastrpc_map_lookup inlined]
fastrpc_map_create
fastrpc_internal_invoke
fastrpc_device_ioctl
__arm64_sys_ioctl
invoke_syscall
Fixes: c68cfb718c ("misc: fastrpc: Add support for context Invoke method")
Cc: stable <stable@kernel.org>
Signed-off-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221124174941.418450-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, there is a race window between the point when the mutex is
unlocked in fastrpc_map_lookup and the reference count increasing
(fastrpc_map_get) in fastrpc_map_find, which can also lead to
use-after-free.
So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us
to both protect the maps list by also taking the &fl->lock spinlock and
the reference count, since the spinlock will be released only after.
Add take_ref argument to make this suitable for all callers.
Fixes: 8f6c1d8c4f ("misc: fastrpc: Add fdlist implementation")
Cc: stable <stable@kernel.org>
Co-developed-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Ola Jeppsson <ola@snap.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221124174941.418450-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Georgi writes:
interconnect fixes for v6.2-rc
This contains fixes for a rare boot hang issue that has been reported
on the db820c dragonboard.
- dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
- interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
- interconnect: qcom: msm8996: Fix regmap max_register values
- interconnect: qcom: rpm: Use _optional func for provider clocks
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: rpm: Use _optional func for provider clocks
interconnect: qcom: msm8996: Fix regmap max_register values
interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
gcc-13.0.1 reports a type mismatch for two functions:
drivers/firmware/xilinx/zynqmp.c:1228:5: error: conflicting types for 'zynqmp_pm_set_rpu_mode' due to enum/integer mismatch; have 'int(u32, enum rpu_oper_mode)' {aka 'int(unsigned int, enum rpu_oper_mode)'} [-Werror=enum-int-mismatch]
1228 | int zynqmp_pm_set_rpu_mode(u32 node_id, enum rpu_oper_mode rpu_mode)
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/firmware/xilinx/zynqmp.c:25:
include/linux/firmware/xlnx-zynqmp.h:552:5: note: previous declaration of 'zynqmp_pm_set_rpu_mode' with type 'int(u32, u32)' {aka 'int(unsigned int, unsigned int)'}
552 | int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1);
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/firmware/xilinx/zynqmp.c:1246:5: error: conflicting types for 'zynqmp_pm_set_tcm_config' due to enum/integer mismatch; have 'int(u32, enum rpu_tcm_comb)' {aka 'int(unsigned int, enum rpu_tcm_comb)'} [-Werror=enum-int-mismatch]
1246 | int zynqmp_pm_set_tcm_config(u32 node_id, enum rpu_tcm_comb tcm_mode)
| ^~~~~~~~~~~~~~~~~~~~~~~~
include/linux/firmware/xlnx-zynqmp.h:553:5: note: previous declaration of 'zynqmp_pm_set_tcm_config' with type 'int(u32, u32)' {aka 'int(unsigned int, unsigned int)'}
553 | int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1);
| ^~~~~~~~~~~~~~~~~~~~~~~~
Change the declaration in the header to match the function definition.
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the original implementation of dwmac5
commit 8bf993a587 ("net: stmmac: Add support for DWMAC5 and implement Safety Features")
all safety features were enabled by default.
Later it seems some implementations didn't have support for all the
features, so in
commit 5ac712dcdf ("net: stmmac: enable platform specific safety features")
the safety_feat_cfg structure was added to the callback and defined for
some platforms to selectively enable these safety features.
The problem is that only certain platforms were given that software
support. If the automotive safety package bit is set in the hardware
features register the safety feature callback is called for the platform,
and for platforms that didn't get a safety_feat_cfg defined this results
in the following NULL pointer dereference:
[ 7.933303] Call trace:
[ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac]
[ 7.941455] __stmmac_open+0x16c/0x474 [stmmac]
[ 7.946117] stmmac_open+0x38/0x70 [stmmac]
[ 7.950414] __dev_open+0x100/0x1dc
[ 7.954006] __dev_change_flags+0x18c/0x204
[ 7.958297] dev_change_flags+0x24/0x6c
[ 7.962237] do_setlink+0x2b8/0xfa4
[ 7.965827] __rtnl_newlink+0x4ec/0x840
[ 7.969766] rtnl_newlink+0x50/0x80
[ 7.973353] rtnetlink_rcv_msg+0x12c/0x374
[ 7.977557] netlink_rcv_skb+0x5c/0x130
[ 7.981500] rtnetlink_rcv+0x18/0x2c
[ 7.985172] netlink_unicast+0x2e8/0x340
[ 7.989197] netlink_sendmsg+0x1a8/0x420
[ 7.993222] ____sys_sendmsg+0x218/0x280
[ 7.997249] ___sys_sendmsg+0xac/0x100
[ 8.001103] __sys_sendmsg+0x84/0xe0
[ 8.004776] __arm64_sys_sendmsg+0x24/0x30
[ 8.008983] invoke_syscall+0x48/0x114
[ 8.012840] el0_svc_common.constprop.0+0xcc/0xec
[ 8.017665] do_el0_svc+0x38/0xb0
[ 8.021071] el0_svc+0x2c/0x84
[ 8.024212] el0t_64_sync_handler+0xf4/0x120
[ 8.028598] el0t_64_sync+0x190/0x194
Go back to the original behavior, if the automotive safety package
is found to be supported in hardware enable all the features unless
safety_feat_cfg is passed in saying this particular platform only
supports a subset of the features.
Fixes: 5ac712dcdf ("net: stmmac: enable platform specific safety features")
Reported-by: Ning Cai <ncai@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix multiple W=1 kernel-doc warnings in i2c-rk3x.c:
drivers/i2c/busses/i2c-rk3x.c:83: warning: missing initial short description on line:
* struct i2c_spec_values:
drivers/i2c/busses/i2c-rk3x.c:139: warning: missing initial short description on line:
* struct rk3x_i2c_calced_timings:
drivers/i2c/busses/i2c-rk3x.c:162: warning: missing initial short description on line:
* struct rk3x_i2c_soc_data:
drivers/i2c/busses/i2c-rk3x.c:242: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Generate a START condition, which triggers a REG_INT_START interrupt.
drivers/i2c/busses/i2c-rk3x.c:261: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Generate a STOP condition, which triggers a REG_INT_STOP interrupt.
drivers/i2c/busses/i2c-rk3x.c:304: warning: expecting prototype for Setup a read according to i2c(). Prototype was for rk3x_i2c_prepare_read() instead
drivers/i2c/busses/i2c-rk3x.c:335: warning: expecting prototype for Fill the transmit buffer with data from i2c(). Prototype was for rk3x_i2c_fill_transmit_buf() instead
drivers/i2c/busses/i2c-rk3x.c:535: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Get timing values of I2C specification
drivers/i2c/busses/i2c-rk3x.c:552: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Calculate divider values for desired SCL frequency
drivers/i2c/busses/i2c-rk3x.c:713: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Calculate timing values for desired SCL frequency
drivers/i2c/busses/i2c-rk3x.c:963: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Setup I2C registers for an I2C operation specified by msgs, num.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add "struct" to prevent this kernel-doc warning:
drivers/i2c/busses/i2c-axxia.c:135: warning: cannot understand function prototype: 'struct axxia_i2c_dev '
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Srujana Challa says:
====================
octeontx2-af: Miscellaneous changes for CPT
This patchset consists of miscellaneous changes for CPT.
- Adds a new mailbox to reset the requested CPT LF.
- Modify FLR sequence as per HW team suggested.
- Adds support to recover CPT engines when they gets fault.
- Updates CPT inbound inline IPsec configuration mailbox,
as per new generation of the OcteonTX2 chips.
- Adds a new mailbox to return CPT FLT Interrupt info.
---
v2:
- Addressed a review comment.
v1:
- Dropped patch "octeontx2-af: Fix interrupt name strings completely"
to submit to net.
---
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
CPT HW would trigger the CPT AF FLT interrupt when CPT engines
hits some uncorrectable errors and AF is the one which receives
the interrupt and recovers the engines.
This patch adds a mailbox for CPT VFs to request for CPT faulted
and recovered engines info.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CN10K CPT coprocessor contains a context processor
to accelerate updates to the IPsec security association
contexts. The context processor contains a context cache.
This patch updates CPT LF ALLOC mailbox to config ctx_ilen
requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of
initial context fetch.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CN10K CPT coprocessor includes a component named RXC which
is responsible for reassembly of inner IP packets. RXC has
the feature to evict oldest entries based on age/threshold.
The age/threshold is being set to minimum values to evict
all entries at the time of teardown.
This patch adds code to restore timeout and threshold config
after teardown sequence is complete as it is global config.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Optimize CPT PF identification in mbox handling for faster
mbox response by doing it at AF driver probe instead of
every mbox message.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On OcteonTX2 platform CPT instruction enqueue is only
possible via LMTST operations.
The existing FLR sequence mentioned in HRM requires
a dummy LMTST to CPT but LMTST can't be submitted from
AF driver. So, HW team provided a new sequence to avoid
dummy LMTST. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On OcteonTX2 SoC, the admin function (AF) is the only one with all
priviliges to configure HW and alloc resources, PFs and it's VFs
have to request AF via mailbox for all their needs.
This patch adds a new mailbox for CPT VFs to request for CPT LF
reset.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CPT engine has uncorrectable errors, it will get halted and
must be disabled and re-enabled. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The preferred form for Renesas' compatible strings is:
"<vendor>,<family>-<module>"
Somehow the compatible string for the r9a09g011 I2C IP was upstreamed
as renesas,i2c-r9a09g011 instead of renesas,r9a09g011-i2c, which
is really confusing, especially considering the generic fallback
is renesas,rzv2m-i2c.
The first user of renesas,i2c-r9a09g011 in the kernel is not yet in
a kernel release, it will be in v6.1, therefore it can still be
fixed in v6.1.
Even if we don't fix it before v6.2, I don't think there is any
harm in making such a change.
s/renesas,i2c-r9a09g011/renesas,r9a09g011-i2c/g for consistency.
Fixes: ba7a4d15e2 ("dt-bindings: i2c: Document RZ/V2M I2C controller")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
