betopff_init() only checks the total sum of the report counts for each
report field to be at least 4, but hid_betopff_play() expects 4 report
fields.
A device advertising an output report with one field and 4 report counts
would pass the check but crash the kernel with a NULL pointer dereference
in hid_betopff_play().
Fixes: 52cd7785f3 ("HID: betop: add drivers/hid/hid-betopff.c")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
commit 1796f808e4 ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.
However on Clevo NL5xRU there is a mistake in the ACPI tables that the
TP_ATTN# signal connected to GPIO 9 is configured as ActiveLow and level
triggered but connected to a pull up. As soon as the system suspends the
touchpad loses power and then the system wakes up.
To avoid this problem, introduce a quirk for this model that will prevent
the wakeup capability for being set for GPIO 9.
Fixes: 1796f808e4 ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
Reported-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627
Co-developed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Commit a7766ef18b33("virtio_net: disable cb aggressively") enables
virtqueue callback via the following statement:
do {
if (use_napi)
virtqueue_disable_cb(sq->vq);
free_old_xmit_skbs(sq, false);
} while (use_napi && kick &&
unlikely(!virtqueue_enable_cb_delayed(sq->vq)));
When NAPI is used and kick is false, the callback won't be enabled
here. And when the virtqueue is about to be full, the tx will be
disabled, but we still don't enable tx interrupt which will cause a TX
hang. This could be observed when using pktgen with burst enabled.
TO be consistent with the logic that tries to disable cb only for
NAPI, fixing this by trying to enable delayed callback only when NAPI
is enabled when the queue is about to be full.
Fixes: a7766ef18b ("virtio_net: disable cb aggressively")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PTP TX timestamp handling was observed to be broken with this driver
when using the raw Layer 2 PTP encapsulation. ptp4l was not receiving
the expected TX timestamp after transmitting a packet, causing it to
enter a failure state.
The problem appears to be due to the way that the driver pads packets
which are smaller than the Ethernet minimum of 60 bytes. If headroom
space was available in the SKB, this caused the driver to move the data
back to utilize it. However, this appears to cause other data references
in the SKB to become inconsistent. In particular, this caused the
ptp_one_step_sync function to later (in the TX completion path) falsely
detect the packet as a one-step SYNC packet, even when it was not, which
caused the TX timestamp to not be processed when it should be.
Using the headroom for this purpose seems like an unnecessary complexity
as this is not a hot path in the driver, and in most cases it appears
that there is sufficient tailroom to not require using the headroom
anyway. Remove this usage of headroom to prevent this inconsistency from
occurring and causing other problems.
Fixes: 653e92a917 ("net: macb: add support for padding and fcs computation")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Perf test "build id cache operations" fails for PE executable. Logs
below from powerpc system. Same is observed on x86 as well.
<<>>
Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok
build id: 5a0fd882b53084224ba47b624c55a469
link: /tmp/perf.debug.w0V/.build-id/5a/0fd882b53084224ba47b624c55a469
file: /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf
failed: file /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist
test child finished with -1
---- end ----
build id cache operations: FAILED!
<<>>
The test tries to do:
<<>>
mkdir /tmp/perf.debug.TeY1
perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a ./tests/shell/../pe-file.exe
<<>>
The option "--buildid-dir" sets the build id cache directory as
/tmp/perf.debug.TeY1. The option given to buildid-cahe, ie "-a
./tests/shell/../pe-file.exe", is to add the pe-file.exe to the cache.
The testcase, sets buildid-dir and adds the file: pe-file.exe to build
id cache. To check if the command is run successfully, "check" function
looks for presence of the file in buildid cache directory. But the check
here expects the added file to be executable. Snippet below:
<<>>
if [ ! -x $file ]; then
echo "failed: file ${file} does not exist"
exit 1
fi
<<>>
The buildid test is done for sha1 binary, md5 binary and also for PE
file. The first two binaries are created at runtime by compiling with
"--build-id" option and hence the check for sha1/md5 test should use [ !
-x ]. But in case of PE file, the permission for this input file is
rw-r--r-- Hence the file added to build id cache has same permissoin
Original file:
ls tests/pe-file.exe | xargs stat --printf "%n %A \n"
tests/pe-file.exe -rw-r--r--
buildid cache file:
ls /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf | xargs stat --printf "%n %A \n"
/tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf -rw-r--r--
Fix the test to match with the permission of original file in case of FE
file. ie if the "tests/pe-file.exe" file is not having exec permission,
just check for existence of the buildid file using [ ! -e <file> ]
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230116050131.17221-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pablo Niera Ayuso says:
====================
The following patchset contains Netfilter fixes for net:
1) Fix syn-retransmits until initiator gives up when connection is re-used
due to rst marked as invalid, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The test "build id cache operations" fails on powerpc as below:
Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok
build id: 5a0fd882b53084224ba47b624c55a469
link: /tmp/perf.debug.ZTu/.build-id/5a/0fd882b53084224ba47b624c55a469
file: /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf
failed: file /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist
test child finished with -1
---- end ----
build id cache operations: FAILED!
The failing test is when trying to add pe-file.exe to build id cache.
'perf buildid-cache' can be used to add/remove/manage files from the
build-id cache. "-a" option is used to add a file to the build-id cache.
Simple command to do so for a PE exe file:
# ls -ltr tests/pe-file.exe
-rw-r--r--. 1 root root 75595 Jan 10 23:35 tests/pe-file.exe
The file is in home directory.
# mkdir /tmp/perf.debug.TeY1
# perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a tests/pe-file.exe
The above will create ".build-id" folder in build id directory, which is
/tmp/perf.debug.TeY1. Also adds file to this folder under build id.
Example:
# ls -ltr /tmp/perf.debug.TeY1/.build-id/5a/0fd882b53084224ba47b624c55a469/
total 76
-rw-r--r--. 1 root root 0 Jan 11 00:38 probes
-rwxr-xr-x. 1 root root 75595 Jan 11 00:38 elf
We can see in the results that file mode for original file and file in
build id directory is different. ie, build id file has executable
permission whereas original file doesn’t have.
The code path and function (build_id_cache__add to add a file to the
cache is in "util/build-id.c". In build_id_cache__add() function, it
first attempts to link the original file to destination cache folder.
If linking the file fails (which can happen if the destination and
source is on a different mount points), it will copy the file to
destination. Here copyfile() routine explicitly uses mode as "755" and
hence file in the destination will have executable permission.
Code snippet:
if (link(realname, filename) && errno != EEXIST && copyfile(name, filename))
strace logs:
172285 link("/home/<user_name>/linux/tools/perf/tests/pe-file.exe", "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf") = -1 EXDEV (Invalid cross-device link)
172285 newfstatat(AT_FDCWD, "tests/pe-file.exe", {st_mode=S_IFREG|0644, st_size=75595, ...}, 0) = 0
172285 openat(AT_FDCWD, "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/.elf.KbAnsl", O_RDWR|O_CREAT|O_EXCL, 0600) = 3
172285 fchmod(3, 0755) = 0
172285 openat(AT_FDCWD, "tests/pe-file.exe", O_RDONLY) = 4
172285 mmap(NULL, 75595, PROT_READ, MAP_PRIVATE, 4, 0) = 0x7fffa5cd0000
172285 pwrite64(3, "MZ\220\0\3\0\0\0\4\0\0\0\377\377\0\0\270\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 75595, 0) = 75595
Whereas if the link succeeds, it succeeds in the first attempt itself
and the file in the build-id dir will have same permission as original
file.
Example, above uses /tmp. Instead if we use "--buildid-dir /home/build",
linking will work here since mount points are same. Hence the
destination file will not have executable permission.
Since the testcase "tests/shell/buildid.sh" always looks for executable
file, test fails in powerpc environment when test is run from /root.
The patch adds a change in build_id_cache__add() to use copyfile_mode()
which also passes the file’s original mode as argument. This way the
destination file mode also will be same as original file.
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230116050131.17221-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
b5f0de6df6 ("net: dev: Convert sa_data to flexible array in struct sockaddr")
That don't result in any changes in the tables generated from that
header.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
9cb1096f85 ("KVM: arm64: Enable ring-based dirty memory tracking")
That doesn't result in any changes in tooling (built on a Libre Computer
Firefly ROC-RK3399-PC-V1.1-A running Ubuntu 22.04), only addresses this
perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/Y8fmIT5PIfGaZuwa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the function sdma_load_context() fails, the sdma_desc will be
freed, but the allocated desc->bd is forgot to be freed.
We already met the sdma_load_context() failure case and the log as
below:
[ 450.699064] imx-sdma 30bd0000.dma-controller: Timeout waiting for CH0 ready
...
In this case, the desc->bd will not be freed without this change.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20221130090800.102035-1-hui.wang@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On ARMv5 and earlier, a randconfig build can still run into
WARNING: unmet direct dependencies detected for IOMMU_IO_PGTABLE_LPAE
Depends on [n]: IOMMU_SUPPORT [=y] && (ARM [=y] || ARM64 || COMPILE_TEST [=y]) && !GENERIC_ATOMIC64 [=y]
Selected by [y]:
- DRM_PANFROST [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARM [=y] || ARM64 || COMPILE_TEST [=y] && !GENERIC_ATOMIC64 [=y]) && MMU [=y]
Rework the dependencies to always require a working cmpxchg64.
Fixes: db594ba3fc ("drm/panfrost: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117164456.1591901-1-arnd@kernel.org
Make sure calibration values are defined to prevent potential kernel
crashes. This fixes a hypothetical issue for virtual or clone devices
inspired by a similar fix for DS4.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
