Following line should listen for a rising edge and exit after the first
one since '-c 1' is provided.
# gpio-event-mon -n gpiochip1 -o 0 -r -c 1
It works with kernel 4.19 but it doesn't work with 5.10. In 5.10 the
above command doesn't exit after the first rising edge it keep listening
for an event forever. The '-c 1' is not taken into an account.
The problem is in commit 62757c32d5 ("tools: gpio: add multi-line
monitoring to gpio-event-mon").
Before this commit the iterator 'i' in monitor_device() is used for
counting of the events (loops). In the case of the above command (-c 1)
we should start from 0 and increment 'i' only ones and hit the 'break'
statement and exit the process. But after the above commit counting
doesn't start from 0, it start from 1 when we listen on one line.
It is because 'i' is used from one more purpose, counting of lines
(num_lines) and it isn't restore to 0 after following code
for (i = 0; i < num_lines; i++)
gpiotools_set_bit(&values.mask, i);
Restore the initial value of the iterator to 0 in order to allow counting
of loops to work for any cases.
Fixes: 62757c32d5 ("tools: gpio: add multi-line monitoring to gpio-event-mon")
Signed-off-by: Ivo Borisov Shopov <ivoshopov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[Bartosz: tweak the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This one was left behind by a previous cleanup patch:
drivers/gpio/gpio-ep93xx.c: In function 'ep93xx_gpio_add_bank':
drivers/gpio/gpio-ep93xx.c:366:34: error: unused variable 'ic' [-Werror=unused-variable]
Fixes: 216f37366e ("gpio: ep93xx: Make irqchip immutable")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When CONFIG_PM is disabled, the driver fails to build:
drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get':
drivers/accel/ivpu/ivpu_pm.c:240:84: error: 'struct dev_pm_info' has no member named 'usage_count'
240 | ivpu_dbg(vdev, RPM, "rpm_get count %d\n", atomic_read(&vdev->drm.dev->power.usage_count));
| ^
include/linux/dynamic_debug.h:223:29: note: in definition of macro '__dynamic_func_call_cls'
223 | func(&id, ##__VA_ARGS__); \
| ^~~~~~~~~~~
include/linux/dynamic_debug.h:249:9: note: in expansion of macro '_dynamic_func_call_cls'
249 | _dynamic_func_call_cls(_DPRINTK_CLASS_DFLT, fmt, func, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~
include/linux/dynamic_debug.h:272:9: note: in expansion of macro '_dynamic_func_call'
272 | _dynamic_func_call(fmt, __dynamic_dev_dbg, \
| ^~~~~~~~~~~~~~~~~~
include/linux/dev_printk.h:155:9: note: in expansion of macro 'dynamic_dev_dbg'
155 | dynamic_dev_dbg(dev, dev_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~
drivers/accel/ivpu/ivpu_drv.h:65:17: note: in expansion of macro 'dev_dbg'
65 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \
| ^~~~~~~
drivers/accel/ivpu/ivpu_pm.c:240:9: note: in expansion of macro 'ivpu_dbg'
240 | ivpu_dbg(vdev, RPM, "rpm_get count %d\n", atomic_read(&vdev->drm.dev->power.usage_count));
| ^~~~~~~~
It would be possible to rework these statements to only conditionally print
the reference counter, or to make the driver depend on CONFIG_PM, but my
impression is that these are not actually needed at all if the driver generally
works, or they could be put back when required. Just remove all four of these
to make the driver build in all configurations.
Fixes: 852be13f3b ("accel/ivpu: Add PM support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126163804.3648051-1-arnd@kernel.org
Pull x86 platform driver fixes from Hans de Goede:
- Fix false positive apple_gmux backlight detection on older iGPU only
MacBook models
- Various other small fixes and hardware-id additions
* tag 'platform-drivers-x86-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms
ACPI: video: Fix apple gmux detection
platform/x86: apple-gmux: Add apple_gmux_detect() helper
platform/x86: apple-gmux: Move port defines to apple-gmux.h
platform/x86: hp-wmi: Fix cast to smaller integer type warning
platform/x86/amd: pmc: Add a module parameter to disable workarounds
platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN
platform/x86: asus-wmi: Fix kbd_dock_devid tablet-switch reporting
platform/x86: gigabyte-wmi: add support for B450M DS3H WIFI-CF
platform/x86: hp-wmi: Handle Omen Key event
platform/x86: dell-wmi: Add a keymap for KEY_MUTE in type 0x0010 table
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- sched: sch_taprio: do not schedule in taprio_reset()
Previous releases - regressions:
- core: fix UaF in netns ops registration error path
- ipv4: prevent potential spectre v1 gadgets
- ipv6: fix reachability confirmation with proxy_ndp
- netfilter: fix for the set rbtree
- eth: fec: use page_pool_put_full_page when freeing rx buffers
- eth: iavf: fix temporary deadlock and failure to set MAC address
Previous releases - always broken:
- netlink: prevent potential spectre v1 gadgets
- netfilter: fixes for SCTP connection tracking
- mctp: struct sock lifetime fixes
- eth: ravb: fix possible hang if RIS2_QFF1 happen
- eth: tg3: resolve deadlock in tg3_reset_task() during EEH
Misc:
- Mat stepped out as MPTCP co-maintainer"
* tag 'net-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: mdio-mux-meson-g12a: force internal PHY off on mux switch
docs: networking: Fix bridge documentation URL
tsnep: Fix TX queue stop/wake for multiple queues
net/tg3: resolve deadlock in tg3_reset_task() during EEH
net: mctp: mark socks as dead on unhash, prevent re-add
net: mctp: hold key reference when looking up a general key
net: mctp: move expiry timer delete to unhash
net: mctp: add an explicit reference from a mctp_sk_key to sock
net: ravb: Fix possible hang if RIS2_QFF1 happen
net: ravb: Fix lack of register setting after system resumed for Gen3
net/x25: Fix to not accept on connected socket
ice: move devlink port creation/deletion
sctp: fail if no bound addresses can be used for a given scope
net/sched: sch_taprio: do not schedule in taprio_reset()
Revert "Merge branch 'ethtool-mac-merge'"
netrom: Fix use-after-free of a listening socket.
netfilter: conntrack: unify established states for SCTP paths
Revert "netfilter: conntrack: add sctp DATA_SENT state"
netfilter: conntrack: fix bug in for_each_sctp_chunk
netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
...
I'm not exactly clear on what strange workflow causes people to do it,
but clearly occasionally some files end up being committed as executable
even though they clearly aren't.
This is a reprise of commit 90fda63fa1 ("treewide: fix up files
incorrectly marked executable"), just with a different set of files (but
with the same trivial shell scripting).
So apparently we need to re-do this every five years or so, and Joe
needs to just keep reminding me to do so ;)
Reported-by: Joe Perches <joe@perches.com>
Fixes: 523375c943 ("drm/vmwgfx: Port vmwgfx to arm64")
Fixes: 5c43993777 ("ASoC: codecs: add support for ES8326")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the RUNTIME_PM_OPS() and pm_ptr() macros to handle the
.runtime_suspend/.runtime_resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_PM is disabled, without having
to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix the following coccicheck warning:
./drivers/gpu/drm/tegra/submit.c:689:2-7: WARNING:
NULL check before some freeing functions is not needed.
Signed-off-by: Yushan Zhou <katrinzhou@tencent.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently all fences have a 30 second timeout to ensure they are
cleaned up if the fence never completes otherwise. However, this
one size fits all solution doesn't actually fit in every case,
such as syncpoint waiting where we want to be able to have timeouts
longer than 30 seconds. As such, we want to be able to give control
over fence cancellation to the caller (and maybe eventually get rid
of the internal timeout altogether).
Here we add this cancellation mechanism by essentially adding a
function for entering the timeout path by function call, and changing
the syncpoint wait function to use it.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move from the old, complex intr handling code to a new implementation
based on dma_fences. While there is a fair bit of churn to get there,
the new implementation is much simpler and likely faster as well due
to allowing signaling directly from interrupt context.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In anticipation of removal of the intr API, implement job tracking
using DMA fences instead. The main two things about this are
making cdma_update schedule the work since fence completion can
now be called from interrupt context, and some complication in
ensuring the callback is not running when we free the fence.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In anticipation of removal of the intr API, move host1x_syncpt_wait
to use DMA fences instead. As of this patch, this means that waits
have a 30 second maximum timeout because of the implicit timeout
we have with fences, but that will be lifted in a follow-up patch.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The code to write the syncpoint channel assignment register
incorrectly skips the write if hypervisor registers are not available.
The register, however, is within the guest aperture so remove the
check and assign syncpoints properly even on virtualized systems.
Fixes: c3f52220f2 ("gpu: host1x: Enable Tegra186 syncpoint protection")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Tegra186+, the syncpoint ID has 10 bits of space. To allow
using more than 256 syncpoints, fix the mask.
Fixes: 9abdd497cd ("gpu: host1x: Tegra234 device data and headers")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra DRM tree moved to freedesktop.org's gitlab a few releases ago,
so update the MAINTAINERS entry accordingly.
Signed-off-by: Thierry Reding <treding@nvidia.com>
It turns out the optimisation implemented by commit 4f2c3872dd is
totally broken, since all the places that consume hw->dtcs_used for
events other than cycle count are still not expecting it to be sparsely
populated, and fail to read all the relevant DTC counters correctly if
so.
If implemented correctly, the optimisation potentially saves up to 3
register reads per event update, which is reasonably significant for
events targeting a single node, but still not worth a massive amount of
additional code complexity overall. Getting it right within the current
design looks a fair bit more involved than it was ever intended to be,
so let's just make a functional revert which restores the old behaviour
while still backporting easily.
Fixes: 4f2c3872dd ("perf/arm-cmn: Optimise DTC counter accesses")
Reported-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/b41bb4ed7283c3d8400ce5cf5e6ec94915e6750f.1674498637.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Convert all the connectors that use cached connector edid and
detect_edid to drm_edid.
Since drm_get_edid() calls drm_connector_update_edid_property() while
drm_edid_read*() do not, we need to call drm_edid_connector_update()
separately, in part due to the EDID caching behaviour in HDMI and
DP. Especially DP depends on the details parsed from EDID. (The big
behavioural change conflating EDID reading with parsing and property
update was done in commit 5186421cbf ("drm: Introduce epoch counter to
drm_connector"))
v6: Rebase on drm_edid_connector_add_modes()
v5: Fix potential uninitialized var use (kernel test robot <lkp@intel.com>)
v4: Call drm_edid_connector_update() after reading HDMI/DP EDID
v3: Don't leak vga switcheroo EDID in LVDS init (Ville)
v2: Don't leak opregion fallback EDID (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eabb4de932841b38b34cc2818ea9fbf7c10224fd.1674643465.git.jani.nikula@intel.com
Stephen Rothwell reported htmldocs warnings when merging accel tree:
Documentation/ABI/testing/sysfs-driver-habanalabs:201: ERROR: Unexpected indentation.
Documentation/ABI/testing/sysfs-driver-habanalabs:201: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/ABI/testing/sysfs-driver-habanalabs:201: ERROR: Unexpected indentation.
Documentation/ABI/testing/sysfs-driver-habanalabs:201: WARNING: Block quote ends without a blank line; unexpected unindent.
Fix these by fixing alignment of list of card status returned by
/sys/class/habanalabs/hl<n>/status.
Link: https://lore.kernel.org/linux-next/20230120130634.61c3e857@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The device specific directory in debugfs does not have "accel". For
example, the documentation says device 0 should have a debugfs entry as
/sys/kernel/debug/accel/accel0/ but in reality the entry is
/sys/kernel/debug/accel/0/
Fix the documentation to match the implementation.
Fixes: 8c5577a5cc ("doc: add documentation for accel subsystem")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When a decode error happens, we often don't know the exact root
cause (the erroneous address that was accessed) and the exact engine
that created the erroneous transaction.
To find out, we need to go over all the relevant register blocks
in the ASIC. Once we find the relevant engine, we print its details
and the offending address.
This helps tremendously when debugging an error that was created
by running a user workload.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is required in order to allow the kernel to control relevant
configuration space via load and store instructions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If resetting device upon release while the release watchdog work is
scheduled, the compute reset is replaced with hard reset.
In this case, need to clear the in_compute_reset indication in the
device reset information structure.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If device memory scrubbing from hl_device_reset() fails, we return with
an error code but not perform error handling code.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit enhances the following error messages to also provide the
type of error occurred, this in order to ease debugging of errors
detected during firmware-load.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Completion timestamp is taken during the actual command submission
release. As the release happens in a work queue, the timestamp taken
is not accurate. Hence, we will take the timestamp in the interrupt
handler itself while propagating it to the release function.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support more user interrupt types in the future, we
enumerate the user interrupt type instead of using a boolean.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Handling edma razwi is different than all other engines since edma
uses sft routers. For hbw transactions sft router contain separate
interface for each edma and for lbw there is common interface for
both edma engines of the same dcore.
To handle the razwi correctly we need to:
1. Simplify the calculation of the sft router address.
2. Add razwi handling for edma qm errors, since edma qman doesn't
reports axi error response.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
A device with status malfunction indicates that it can't be used.
In such a case we do not support certain reset types, e.g.,
all kinds of soft-resets (compute reset, inference soft-reset),
and reset upon device release.
A hard-reset is the only way that an unusable device can change its
status. All other reset procedures can't put the device in a reset
procedure, which might ultimately cause the device to change its
status, unintentionally, to become operational again.
Such a scenario has recently occurred, when a user requested
a hard-reset while another heavy user workload was ongoing (reset
request is queued).
Since the workload couldn't finish within reset's timeout limits, the
reset has failed and set a device status malfunction.
Eventually, when the user released the FD, an unsuccessful soft-reset
occurred, hence followed by an additional hard-reset that changed the
ASICs status back to be operational.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
