[Why]
Stream disable sequence incorretly destroys HDCP session while stream is
not blanked and while audio is not muted. This sequence causes a flash
of corruption during mode change and an audio click.
[How]
Change sequence to blank stream before destroying HDCP session. Audio will
also be muted by blanking the stream.
Cc: stable@vger.kernel.org
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Resuming from suspend, CEA blocks from EDID are not parsed and no video
modes can support YUV420. When this happens, output bpc cannot go over
8-bit with 4K modes on HDMI.
[How]
In amdgpu_dm_update_connector_after_detect(), drm_add_edid_modes() is
called after drm_connector_update_edid_property() to fully parse EDID
and update display info.
Cc: stable@vger.kernel.org
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Using FRAME_UPDATE will result in infopacket to be potentially updated
one frame late.
In commit stream scenarios for previously active stream, some stale
infopacket data from previous config might be erroneously sent out on
initial frame after stream is re-enabled.
[How]
Switch to using IMMEDIATE_UPDATE mode
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1. There is a calculation that is using frame_time_in_us instead of
last_render_time_in_us to calculate whether choosing an LFC multiplier
would cause the inserted frame duration to be outside of range.
2. We do not handle unsigned integer subtraction correctly and it underflows
to a really large value, which causes some logic errors.
[How]
1. Fix logic to calculate 'within range' using last_render_time_in_us
2. Split out delta_from_mid_point_delta_in_us calculation to ensure
we don't underflow and wrap around
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The UVD/VCE PG state is managed by UVD and VCE IP. It's error-prone to
assume the bootup state in SMU based on the dpm status.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some registers are not accessible to virtual function setup, so
skip their initialization when in VF-SRIOV mode.
v2: move SRIOV VF check into specify functions;
modify commit description and comment.
Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When '*sgt' is allocated, we must allocated 'sizeof(**sgt)' bytes instead
of 'sizeof(*sg)'.
The sizeof(*sg) is bigger than sizeof(**sgt) so this wastes memory but
it won't lead to corruption.
Fixes: f44ffd677f ("drm/amdgpu: add support for exporting VRAM using DMA-buf v3")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If we're in the error path failing links and we have a link that has
grabbed a reference to the fs_struct, then we cannot safely drop our
reference to the table if we already hold the completion lock. This
adds a hardirq dependency to the fs_struct->lock, which it currently
doesn't have.
Defer the final cleanup and free of such requests to avoid adding this
dependency.
Reported-by: syzbot+ef4b654b49ed7ff049bf@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we traverse into failing links or timeouts, we need to ensure we
propagate the REQ_F_COMP_LOCKED flag to ensure that we correctly signal
to the completion side that we already hold the completion lock.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syszbot reports a scenario where we recurse on the completion lock
when flushing an overflow:
1 lock held by syz-executor287/6816:
#0: ffff888093cdb4d8 (&ctx->completion_lock){....}-{2:2}, at: io_cqring_overflow_flush+0xc6/0xab0 fs/io_uring.c:1333
stack backtrace:
CPU: 1 PID: 6816 Comm: syz-executor287 Not tainted 5.8.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1f0/0x31e lib/dump_stack.c:118
print_deadlock_bug kernel/locking/lockdep.c:2391 [inline]
check_deadlock kernel/locking/lockdep.c:2432 [inline]
validate_chain+0x69a4/0x88a0 kernel/locking/lockdep.c:3202
__lock_acquire+0x1161/0x2ab0 kernel/locking/lockdep.c:4426
lock_acquire+0x160/0x730 kernel/locking/lockdep.c:5005
__raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline]
_raw_spin_lock_irq+0x67/0x80 kernel/locking/spinlock.c:167
spin_lock_irq include/linux/spinlock.h:379 [inline]
io_queue_linked_timeout fs/io_uring.c:5928 [inline]
__io_queue_async_work fs/io_uring.c:1192 [inline]
__io_queue_deferred+0x36a/0x790 fs/io_uring.c:1237
io_cqring_overflow_flush+0x774/0xab0 fs/io_uring.c:1359
io_ring_ctx_wait_and_kill+0x2a1/0x570 fs/io_uring.c:7808
io_uring_release+0x59/0x70 fs/io_uring.c:7829
__fput+0x34f/0x7b0 fs/file_table.c:281
task_work_run+0x137/0x1c0 kernel/task_work.c:135
exit_task_work include/linux/task_work.h:25 [inline]
do_exit+0x5f3/0x1f20 kernel/exit.c:806
do_group_exit+0x161/0x2d0 kernel/exit.c:903
__do_sys_exit_group+0x13/0x20 kernel/exit.c:914
__se_sys_exit_group+0x10/0x10 kernel/exit.c:912
__x64_sys_exit_group+0x37/0x40 kernel/exit.c:912
do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by passing back the link from __io_queue_async_work(), and
then let the caller handle the queueing of the link. Take care to also
punt the submission reference put to the caller, as we're holding the
completion lock for the __io_queue_defer() case. Hence we need to mark
the io_kiocb appropriately for that case.
Reported-by: syzbot+996f91b6ec3812c48042@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An earlier commit:
b7db41c9e0 ("io_uring: fix regression with always ignoring signals in io_cqring_wait()")
ensured that we didn't get stuck waiting for eventfd reads when it's
registered with the io_uring ring for event notification, but we still
have cases where the task can be waiting on other events in the kernel and
need a bigger nudge to make forward progress. Or the task could be in the
kernel and running, but on its way to blocking.
This means that TWA_RESUME cannot reliably be used to ensure we make
progress. Use TWA_SIGNAL unconditionally.
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Josef <josef.grieb@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When ur_load_imm_any() is inlined into jeq_imm(), it's possible for the
compiler to deduce a case where _val can only have the value of -1 at
compile time. Specifically,
/* struct bpf_insn: _s32 imm */
u64 imm = insn->imm; /* sign extend */
if (imm >> 32) { /* non-zero only if insn->imm is negative */
/* inlined from ur_load_imm_any */
u32 __imm = imm >> 32; /* therefore, always 0xffffffff */
if (__builtin_constant_p(__imm) && __imm > 255)
compiletime_assert_XXX()
This can result in tripping a BUILD_BUG_ON() in __BF_FIELD_CHECK() that
checks that a given value is representable in one byte (interpreted as
unsigned).
FIELD_FIT() should return true or false at runtime for whether a value
can fit for not. Don't break the build over a value that's too large for
the mask. We'd prefer to keep the inlining and compiler optimizations
though we know this case will always return false.
Cc: stable@vger.kernel.org
Fixes: 1697599ee3 ("bitfield.h: add FIELD_FIT() helper")
Link: https://lore.kernel.org/kernel-hardening/CAK7LNASvb0UDJ0U5wkYYRzTAdnEs64HjXpEUL7d=V0CXiAXcNw@mail.gmail.com/
Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Debugged-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When TFO keys are read back on big endian systems either via the global
sysctl interface or via getsockopt() using TCP_FASTOPEN_KEY, the values
don't match what was written.
For example, on s390x:
# echo "1-2-3-4" > /proc/sys/net/ipv4/tcp_fastopen_key
# cat /proc/sys/net/ipv4/tcp_fastopen_key
02000000-01000000-04000000-03000000
Instead of:
# cat /proc/sys/net/ipv4/tcp_fastopen_key
00000001-00000002-00000003-00000004
Fix this by converting to the correct endianness on read. This was
reported by Colin Ian King when running the 'tcp_fastopen_backup_key' net
selftest on s390x, which depends on the read value matching what was
written. I've confirmed that the test now passes on big and little endian
systems.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Fixes: 438ac88009 ("net: fastopen: robustness and endianness fixes for SipHash")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dumazet <edumazet@google.com>
Reported-and-tested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I'm not doing much work on the NFP driver any more.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit dacce2be33 ("vmxnet3: add geneve and vxlan tunnel offload
support") added support for encapsulation offload. However, while
calculating tcp hdr length, it does not take into account if the
packet is encapsulated or not.
This patch fixes this issue by using correct reference for inner
tcp header.
Fixes: dacce2be33 ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commits 6d04fe15f7 and
a31edb2059.
It turns out the idea to share a single pointer for both kernel and user
space address causes various kinds of problems. So use the slightly less
optimal version that uses an extra bit, but which is guaranteed to be safe
everywhere.
Fixes: 6d04fe15f7 ("net: optimize the sockptr_t for unified kernel/user address spaces")
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This serie is a reduced version of the serie
[spi: stm32: various driver enhancements] previously sent.
Alain Volmat (1):
spi: stm32: always perform registers configuration prior to transfer
Amelie Delaunay (3):
spi: stm32: fix fifo threshold level in case of short transfer
spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate
spi: stm32: fixes suspend/resume management
Antonio Borneo (1):
spi: stm32h7: fix race condition at end of transfer
drivers/spi/spi-stm32.c | 98 ++++++++++++++++++++++++++++++-------------------
1 file changed, 61 insertions(+), 37 deletions(-)
--
v2: fix conditional statement within [spi: stm32: fix fifo threshold level in case of short transfer]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.orghttp://lists.infradead.org/mailman/listinfo/linux-arm-kernel
When running "make dt_binding_check" (even if restricted to an unrelated
binding document using DT_SCHEMA_FILES=...):
Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml: ignoring, error in schema: properties: fsl,spi-only-use-cs1-sel
warning: no schema found in file: Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
Fix this by adding a proper type definition for the vendor-specific
fsl,spi-only-use-cs1-sel property.
Fixes: 7ac9bbf6ab ("dt-bindings: lpspi: New property in document DT bindings for LPSPI")
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200807121057.14204-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
The caller of stm32_spi_transfer_one(), spi_transfer_one_message(),
is waiting for us to call spi_finalize_current_transfer() and will
eventually schedule a new transfer, if available.
We should guarantee that the spi controller is really available
before calling spi_finalize_current_transfer().
Move the call to spi_finalize_current_transfer() _after_ the call
to stm32_spi_disable().
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-2-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the log file for a given test is larger than the max size given then use
set the seek from the end of the log file instead of from the start of the
test.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[BUG]
Unmounting a btrfs filesystem with quota disabled will cause the
following NULL pointer dereference:
BTRFS info (device dm-5): has skinny extents
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
CPU: 7 PID: 637 Comm: umount Not tainted 5.8.0-rc7-next-20200731-custom #76
RIP: 0010:kobject_del+0x6/0x20
Call Trace:
btrfs_sysfs_del_qgroups+0xac/0xf0 [btrfs]
btrfs_free_qgroup_config+0x63/0x70 [btrfs]
close_ctree+0x1f5/0x323 [btrfs]
btrfs_put_super+0x15/0x17 [btrfs]
generic_shutdown_super+0x72/0x110
kill_anon_super+0x18/0x30
btrfs_kill_super+0x17/0x30 [btrfs]
deactivate_locked_super+0x3b/0xa0
deactivate_super+0x40/0x50
cleanup_mnt+0x135/0x190
__cleanup_mnt+0x12/0x20
task_work_run+0x64/0xb0
exit_to_user_mode_prepare+0x18a/0x190
syscall_exit_to_user_mode+0x4f/0x270
do_syscall_64+0x45/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace 37b7adca5c1d5c5d ]---
[CAUSE]
Commit 079ad2fb4b ("kobject: Avoid premature parent object freeing in
kobject_cleanup()") changed kobject_del() that it no longer accepts NULL
pointer.
Before that commit, kobject_del() and kobject_put() all accept NULL
pointers and just ignore such NULL pointers.
But that mentioned commit needs to access the parent node, killing the
old NULL pointer behavior.
Unfortunately btrfs is relying on that hidden feature thus we will
trigger such NULL pointer dereference.
[FIX]
Instead of just saving several lines, do proper fs_info->qgroups_kobj
check before calling kobject_del() and kobject_put().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The `if (!ret)` check will always be false and it may result in
ret->path being dereferenced while it is a NULL pointer.
Fixes: a37f232b7b ("btrfs: backref: introduce the skeleton of btrfs_backref_iter")
CC: stable@vger.kernel.org # 5.8+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boleyn Su <boleynsu@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replacing string compare with "codec_dai->name" instead of comparing with
"codec_dai->component->name" in hw_params because,
Here the component name for codec RT1015 is "i2c-10EC5682:00"
and will never be "rt1015-aif1" as it is codec-dai->name.
So, strcmp() always compares and fails to set the
sysclk,pll,bratio for expected codec-dai="rt1015-aif1".
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200807161046.17932-1-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Based on an analysis of the HyperV firmwares (Gen1 and Gen2) it seems
like the SCONTROL is not being set to the ENABLED state as like we have
thought.
Also from a test done by Vitaly Kuznetsov, running a nested HyperV it
was concluded that the first access to the SCONTROL MSR with a read
resulted with the value of 0x1, aka HV_SYNIC_CONTROL_ENABLE.
It's important to note that this diverges from the value states in the
HyperV TLFS of 0.
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200717125238.1103096-2-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's some inconsistency around SB_I_VERSION handling with mount and
remount. Since we don't really want it to be off ever just work around
this by making sure we don't get the flag cleared on remount.
There's a tiny cpu cost of setting the bit, otherwise all changes to
i_version also change some of the times (ctime/mtime) so the inode needs
to be synced. We wouldn't save anything by disabling it.
Reported-by: Eric Sandeen <sandeen@redhat.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add perf impact analysis ]
Signed-off-by: David Sterba <dsterba@suse.com>
While logging an inode, at copy_items(), if we fail to lookup the checksums
for an extent we release the destination path, free the ins_data array and
then return immediately. However a previous iteration of the for loop may
have added checksums to the ordered_sums list, in which case we leak the
memory used by them.
So fix this by making sure we iterate the ordered_sums list and free all
its checksums before returning.
Fixes: 3650860b90 ("Btrfs: remove almost all of the BUG()'s from tree-log.c")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Chris Murphy reported a problem where rpm ostree will bind mount a bunch
of things for whatever voodoo it's doing. But when it does this
/proc/mounts shows something like
/dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0
/dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo/bar 0 0
Despite subvolid=256 being subvol=/foo. This is because we're just
spitting out the dentry of the mount point, which in the case of bind
mounts is the source path for the mountpoint. Instead we should spit
out the path to the actual subvol. Fix this by looking up the name for
the subvolid we have mounted. With this fix the same test looks like
this
/dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0
/dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo 0 0
Reported-by: Chris Murphy <chris@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reported by Forza on IRC that remounting with compression options does
not reflect the change in level, or at least it does not appear to do so
according to the messages:
mount -o compress=zstd:1 /dev/sda /mnt
mount -o remount,compress=zstd:15 /mnt
does not print the change to the level to syslog:
[ 41.366060] BTRFS info (device vda): use zstd compression, level 1
[ 41.368254] BTRFS info (device vda): disk space caching is enabled
[ 41.390429] BTRFS info (device vda): disk space caching is enabled
What really happens is that the message is lost but the level is actualy
changed.
There's another weird output, if compression is reset to 'no':
[ 45.413776] BTRFS info (device vda): use no compression, level 4
To fix that, save the previous compression level and print the message
in that case too and use separate message for 'no' compression.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: David Sterba <dsterba@suse.com>
In try_to_merge_free_space we attempt to find entries to the left and
right of the entry we are adding to see if they can be merged. We
search for an entry past our current info (saved into right_info), and
then if right_info exists and it has a rb_prev() we save the rb_prev()
into left_info.
However there's a slight problem in the case that we have a right_info,
but no entry previous to that entry. At that point we will search for
an entry just before the info we're attempting to insert. This will
simply find right_info again, and assign it to left_info, making them
both the same pointer.
Now if right_info _can_ be merged with the range we're inserting, we'll
add it to the info and free right_info. However further down we'll
access left_info, which was right_info, and thus get a use-after-free.
Fix this by only searching for the left entry if we don't find a right
entry at all.
The CVE referenced had a specially crafted file system that could
trigger this use-after-free. However with the tree checker improvements
we no longer trigger the conditions for the UAF. But the original
conditions still apply, hence this fix.
Reference: CVE-2019-19448
Fixes: 9630308170 ("Btrfs: use hybrid extents+bitmap rb tree for free space")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a bug report of NULL pointer dereference caused in
compress_file_extent():
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Workqueue: btrfs-delalloc btrfs_delalloc_helper [btrfs]
NIP [c008000006dd4d34] compress_file_range.constprop.41+0x75c/0x8a0 [btrfs]
LR [c008000006dd4d1c] compress_file_range.constprop.41+0x744/0x8a0 [btrfs]
Call Trace:
[c000000c69093b00] [c008000006dd4d1c] compress_file_range.constprop.41+0x744/0x8a0 [btrfs] (unreliable)
[c000000c69093bd0] [c008000006dd4ebc] async_cow_start+0x44/0xa0 [btrfs]
[c000000c69093c10] [c008000006e14824] normal_work_helper+0xdc/0x598 [btrfs]
[c000000c69093c80] [c0000000001608c0] process_one_work+0x2c0/0x5b0
[c000000c69093d10] [c000000000160c38] worker_thread+0x88/0x660
[c000000c69093db0] [c00000000016b55c] kthread+0x1ac/0x1c0
[c000000c69093e20] [c00000000000b660] ret_from_kernel_thread+0x5c/0x7c
---[ end trace f16954aa20d822f6 ]---
[CAUSE]
For the following execution route of compress_file_range(), it's
possible to hit NULL pointer dereference:
compress_file_extent()
|- pages = NULL;
|- start = async_chunk->start = 0;
|- end = async_chunk = 4095;
|- nr_pages = 1;
|- inode_need_compress() == false; <<< Possible, see later explanation
| Now, we have nr_pages = 1, pages = NULL
|- cont:
|- ret = cow_file_range_inline();
|- if (ret <= 0) {
|- for (i = 0; i < nr_pages; i++) {
|- WARN_ON(pages[i]->mapping); <<< Crash
To enter above call execution branch, we need the following race:
Thread 1 (chattr) | Thread 2 (writeback)
--------------------------+------------------------------
| btrfs_run_delalloc_range
| |- inode_need_compress = true
| |- cow_file_range_async()
btrfs_ioctl_set_flag() |
|- binode_flags |= |
BTRFS_INODE_NOCOMPRESS |
| compress_file_range()
| |- inode_need_compress = false
| |- nr_page = 1 while pages = NULL
| | Then hit the crash
[FIX]
This patch will fix it by checking @pages before doing accessing it.
This patch is only designed as a hot fix and easy to backport.
More elegant fix may make btrfs only check inode_need_compress() once to
avoid such race, but that would be another story.
Reported-by: Luciano Chavez <chavez@us.ibm.com>
Fixes: 4d3a800ebb ("btrfs: merge nr_pages input and output parameter in compress_pages")
CC: stable@vger.kernel.org # 4.14.x: cecc8d9038: btrfs: Move free_pages_out label in inline extent handling branch in compress_file_range
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
VDPA mlx5 accesses config space as native endian - this is
wrong since it's a modern device and actually uses LE.
It only supports modern guests so we could punt and
just force LE, but let's use the full virtio APIs since people
tend to copy/paste code, and this is not data path anyway.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The USB device (0x17aa:0x1046) that support Lenovo P620 rear panel
line-in claim to support volume control, but it doens't seem to have an
AMP, so when line-in volume lowers below 80, nothing gets recorded
anymore.
Disable the volume control to workaround the issue.
Fixes: f8c11eb7da ("ALSA: usb-audio: Add support for Lenovo ThinkStation P620")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200810133108.31580-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drivers using legacy power management .suspen()/.resume() callbacks
have to manage PCI states and device's PM states themselves. They also
need to take care of standard configuration registers.
Switch to generic power management framework using a single
"struct dev_pm_ops" variable to take the unnecessary load from the driver.
This also avoids the need for the driver to directly call most of the PCI
helper functions and device power state control functions, as through
the generic framework PCI Core takes care of the necessary operations,
and drivers are required to do only device-specific jobs.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver calls pci_enable_wake(...., false) in pch_i2c_suspend() as well
as pch_i2c_resume(). Either it should enable-wake the device in .suspend()
or should not invoke pci_enable_wake() at all.
Concluding that this driver doesn't support enable-wake and PCI core calls
pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from
.suspend() and .resume().
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The memory allocation failure checking for in and out is currently
checking if the pointers are valid rather than the contents of what
they point to. Hence the null check on failed memory allocations is
incorrect. Fix this by adding the missing indirection in the check.
Also for the default case, just set the *in and *out to null as
these don't have any thing allocated to kfree. Finally remove the
redundant *in and *out check as these have been already done on each
allocation in the case statement.
Addresses-Coverity: ("Null pointer dereference")
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200806160828.90463-1-colin.king@canonical.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eli Cohen <eli@mellanox.com>
