commit de6b43798d9043a7c749a0428dbb02d5fff156e5 upstream.
Currently, the RIIC driver may run the I2C bus faster than requested,
which may cause subtle failures. E.g. Biju reported a measured bus
speed of 450 kHz instead of the expected maximum of 400 kHz on RZ/G2L.
The initial calculation of the bus period uses DIV_ROUND_UP(), to make
sure the actual bus speed never becomes faster than the requested bus
speed. However, the subsequent division-by-two steps do not use
round-up, which may lead to a too-small period, hence a too-fast and
possible out-of-spec bus speed. E.g. on RZ/Five, requesting a bus speed
of 100 resp. 400 kHz will yield too-fast target bus speeds of 100806
resp. 403226 Hz instead of 97656 resp. 390625 Hz.
Fix this by using DIV_ROUND_UP() in the subsequent divisions, too.
Tested on RZ/A1H, RZ/A2M, and RZ/Five.
Fixes: d982d66514 ("i2c: riic: remove clock and frequency restrictions")
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: <stable@vger.kernel.org> # v4.15+
Link: https://lore.kernel.org/r/c59aea77998dfea1b4456c4b33b55ab216fcbf5e.1732284746.git.geert+renesas@glider.be
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1201f226c863b7da739f7420ddba818cedf372fc upstream.
Snapshot the output of CPUID.0xD.[1..n] during kvm.ko initiliaization to
avoid the overead of CPUID during runtime. The offset, size, and metadata
for CPUID.0xD.[1..n] sub-leaves does not depend on XCR0 or XSS values, i.e.
is constant for a given CPU, and thus can be cached during module load.
On Intel's Emerald Rapids, CPUID is *wildly* expensive, to the point where
recomputing XSAVE offsets and sizes results in a 4x increase in latency of
nested VM-Enter and VM-Exit (nested transitions can trigger
xstate_required_size() multiple times per transition), relative to using
cached values. The issue is easily visible by running `perf top` while
triggering nested transitions: kvm_update_cpuid_runtime() shows up at a
whopping 50%.
As measured via RDTSC from L2 (using KVM-Unit-Test's CPUID VM-Exit test
and a slightly modified L1 KVM to handle CPUID in the fastpath), a nested
roundtrip to emulate CPUID on Skylake (SKX), Icelake (ICX), and Emerald
Rapids (EMR) takes:
SKX 11650
ICX 22350
EMR 28850
Using cached values, the latency drops to:
SKX 6850
ICX 9000
EMR 7900
The underlying issue is that CPUID itself is slow on ICX, and comically
slow on EMR. The problem is exacerbated on CPUs which support XSAVES
and/or XSAVEC, as KVM invokes xstate_required_size() twice on each
runtime CPUID update, and because there are more supported XSAVE features
(CPUID for supported XSAVE feature sub-leafs is significantly slower).
SKX:
CPUID.0xD.2 = 348 cycles
CPUID.0xD.3 = 400 cycles
CPUID.0xD.4 = 276 cycles
CPUID.0xD.5 = 236 cycles
<other sub-leaves are similar>
EMR:
CPUID.0xD.2 = 1138 cycles
CPUID.0xD.3 = 1362 cycles
CPUID.0xD.4 = 1068 cycles
CPUID.0xD.5 = 910 cycles
CPUID.0xD.6 = 914 cycles
CPUID.0xD.7 = 1350 cycles
CPUID.0xD.8 = 734 cycles
CPUID.0xD.9 = 766 cycles
CPUID.0xD.10 = 732 cycles
CPUID.0xD.11 = 718 cycles
CPUID.0xD.12 = 734 cycles
CPUID.0xD.13 = 1700 cycles
CPUID.0xD.14 = 1126 cycles
CPUID.0xD.15 = 898 cycles
CPUID.0xD.16 = 716 cycles
CPUID.0xD.17 = 748 cycles
CPUID.0xD.18 = 776 cycles
Note, updating runtime CPUID information multiple times per nested
transition is itself a flaw, especially since CPUID is a mandotory
intercept on both Intel and AMD. E.g. KVM doesn't need to ensure emulated
CPUID state is up-to-date while running L2. That flaw will be fixed in a
future patch, as deferring runtime CPUID updates is more subtle than it
appears at first glance, the benefits aren't super critical to have once
the XSAVE issue is resolved, and caching CPUID output is desirable even if
KVM's updates are deferred.
Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241211013302.1347853-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3d87abe11ed04d1b23a474a212f0e5deeb50892 upstream.
Current implementation leaves pdev->dev as a wakeup source. Add a
device_init_wakeup(&pdev->dev, false) call in the .remove() function and
in the error path of the .probe() function.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Fixes: 527f36f5ef ("mmc: mediatek: add support for SDIO eint wakup IRQ")
Cc: stable@vger.kernel.org
Message-ID: <20241203023442.2434018-1-joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 572af9f284669d31d9175122bbef9bc62cea8ded ]
fwnode_find_mii_timestamper() calls of_parse_phandle_with_fixed_args()
but does not decrement the refcount of the obtained OF node. Add an
of_node_put() call before returning from the function.
This bug was detected by an experimental static analysis tool that I am
developing.
Fixes: bc1bee3b87 ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241218035106.1436405-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a17975992cc11588767175247ccaae1213a8b582 ]
Fix the way tcpdump is executed by:
- Using the right variable for the namespace. Currently the use of the
empty "ns" makes the command fail.
- Waiting until it starts to capture to ensure the interesting traffic
is caught on slow systems.
- Using line-buffered output to ensure logs are available when the test
is paused with "-p". Otherwise the last chunk of data might only be
written when tcpdump is killed.
Fixes: 74cc26f416 ("selftests: openvswitch: add interface support")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20241217211652.483016-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70b6f46a4ed8bd56c85ffff22df91e20e8c85e33 ]
With CONFIG_PROVE_LOCKING, when creating a set of type bitmap:ip, adding
it to a set of type list:set and populating it from iptables SET target
triggers a kernel warning:
| WARNING: possible recursive locking detected
| 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted
| --------------------------------------------
| ping/4018 is trying to acquire lock:
| ffff8881094a6848 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
|
| but task is already holding lock:
| ffff88811034c048 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
This is a false alarm: ipset does not allow nested list:set type, so the
loop in list_set_kadd() can never encounter the outer set itself. No
other set type supports embedded sets, so this is the only case to
consider.
To avoid the false report, create a distinct lock class for list:set
type ipset locks.
Fixes: f830837f0e ("netfilter: ipset: list:set set type support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf2c97423a4f89c8b798294d3f34ecfe7e7035c3 ]
The 'max_avail' value is calculated from the system memory
size using order_base_2().
order_base_2(x) is defined as '(x) ? fn(x) : 0'.
The compiler generates two copies of the code that follows
and then expands clamp(max, min, PAGE_SHIFT - 12) (11 on 32bit).
This triggers a compile-time assert since min is 5.
In reality a system would have to have less than 512MB memory
for the bounds passed to clamp to be reversed.
Swap the order of the arguments to clamp() to avoid the warning.
Replace the clamp_val() on the line below with clamp().
clamp_val() is just 'an accident waiting to happen' and not needed here.
Detected by compile time checks added to clamp(), specifically:
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYsT34UkGFKxus63H6UVpYi5GRZkezT9MRLfAbM3f6ke0g@mail.gmail.com/
Fixes: 4f325e2627 ("ipvs: dynamically limit the connection hash table")
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cb2c504d79e7caa3abade3f466750c82ad26f01 ]
The OF node obtained by of_parse_phandle() is not freed. Call
of_node_put() to balance the refcount.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 1676aba5ef ("net: ethernet: bgmac: device tree phy enablement")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241214014912.2810315-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7203d10e93b6e6e1d19481ef7907de6a9133a467 ]
There is a check for NULL at the start of create_txqs() and
create_rxqs() which tess if "nic_dev->txqs" is non-NULL. The
intention is that if the device is already open and the queues
are already created then we don't create them a second time.
However, the bug is that if we have an error in the create_txqs()
then the pointer doesn't get set back to NULL. The NULL check
at the start of the function will say that it's already open when
it's not and the device can't be used.
Set ->txqs back to NULL on cleanup on error.
Fixes: c3e79baf1b ("net-next/hinic: Add logical Txq and Rxq")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0cc98faf-a0ed-4565-a55b-0fa2734bc205@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43fb7bce8866e793275c4f9f25af6a37745f3416 ]
Since commit 0a77d947f599 ("ksmbd: check outstanding simultaneous SMB
operations"), ksmbd enforces a maximum number of simultaneous operations
for a connection. The problem is that reaching the limit causes ksmbd to
close the socket, and the client has no indication that it should have
slowed down.
This behaviour can be reproduced by setting "smb2 max credits = 128" (or
lower), and transferring a large file (25GB).
smbclient fails as below:
$ smbclient //192.168.1.254/testshare -U user%pass
smb: \> put file.bin
cli_push returned NT_STATUS_USER_SESSION_DELETED
putting file file.bin as \file.bin smb2cli_req_compound_submit:
Insufficient credits. 0 available, 1 needed
NT_STATUS_INTERNAL_ERROR closing remote file \file.bin
smb: \> smb2cli_req_compound_submit: Insufficient credits. 0 available,
1 needed
Windows clients fail with 0x8007003b (with smaller files even).
Fix this by delaying reading from the socket until there's room to
allocate a request. This effectively applies backpressure on the client,
so the transfer completes, albeit at a slower rate.
Fixes: 0a77d947f599 ("ksmbd: check outstanding simultaneous SMB operations")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83c47d9e0ce79b5d7c0b21b9f35402dbde0fa15c ]
This changes the semantics of req_running to count all in-flight
requests on a given connection, rather than the number of elements
in the conn->request list. The latter is used only in smb2_cancel,
and the counter is not used
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 43fb7bce8866 ("ksmbd: fix broken transfers when exceeding max simultaneous operations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 922b4b955a03d19fea98938f33ef0e62d01f5159 ]
The existing linked list based implementation of how ts tags are
assigned and managed is unsafe against concurrency and corner cases:
- element addition in tx processing can race against element removal
in ts queue completion,
- element removal in ts queue completion can race against element
removal in device close,
- if a large number of frames gets added to tx queue without ts queue
completions in between, elements with duplicate tag values can get
added.
Use a different implementation, based on per-port used tags bitmaps and
saved skb arrays.
Safety for addition in tx processing vs removal in ts completion is
provided by:
tag = find_first_zero_bit(...);
smp_mb();
<write rdev->ts_skb[tag]>
set_bit(...);
vs
<read rdev->ts_skb[tag]>
smp_mb();
clear_bit(...);
Safety for removal in ts completion vs removal in device close is
provided by using atomic read-and-clear for rdev->ts_skb[tag]:
ts_skb = xchg(&rdev->ts_skb[tag], NULL);
if (ts_skb)
<handle it>
Fixes: 33f5d733b5 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://patch.msgid.link/20241212062558.436455-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d5df3a680ffdaf606baa10636bdb1daf757832e ]
Packets injected by the CPU should have a SRC_PORT field equal to the
CPU port module index in the Analyzer block (ocelot->num_phys_ports).
The blamed commit copied the ocelot_ifh_set_basic() call incorrectly
from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling
with "x", it calls with BIT_ULL(x), but the field is not a port mask,
but rather a single port index.
[ side note: this is the technical debt of code duplication :( ]
The error used to be silent and doesn't appear to have other
user-visible manifestations, but with new changes in the packing
library, it now fails loudly as follows:
------------[ cut here ]------------
Cannot store 0x40 inside bits 46-43 - will truncate
sja1105 spi2.0: xmit timed out
WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198
sja1105 spi2.0: timed out polling for tstamp
CPU: 1 UID: 0 PID: 102 Comm: felix_xmit
Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605
Call trace:
__pack+0x90/0x198 (P)
__pack+0x90/0x198 (L)
packing+0x78/0x98
ocelot_ifh_set_basic+0x260/0x368
ocelot_port_inject_frame+0xa8/0x250
felix_port_deferred_xmit+0x14c/0x258
kthread_worker_fn+0x134/0x350
kthread+0x114/0x138
The code path pertains to the ocelot switchdev driver and to the felix
secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q.
The messenger (packing) is not really to blame, so fix the original
commit instead.
Fixes: e1b9e80236c5 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5b8ee5022a19464783058dc6042e8eefa34e8cd ]
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining.
Fixes: fb4f79264c ("net/smc: tolerate future SMCD versions")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ab332deb671d8f7e66d82a2ff2b3f715bc3a4ad ]
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it.
Fixes: 5c21c4ccaf ("net/smc: determine accepted ISM devices")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7863c9f3d24ba49dbead7e03dfbe40deb5888fdf ]
When receiving proposal msg in server, the fields v2_ext_offset/
eid_cnt/ism_gid_cnt in proposal msg are from the remote client
and can not be fully trusted. Especially the field v2_ext_offset,
once exceed the max value, there has the chance to access wrong
address, and crash may happen.
This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt
before using them.
Fixes: 8c3dca341a ("net/smc: build and send V2 CLC proposal")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a29e220d3c8edbf0e1beb0f028878a4a85966556 ]
When receiving proposal msg in server, the field iparea_offset
and the field ipv6_prefixes_cnt in proposal msg are from the
remote client and can not be fully trusted. Especially the
field iparea_offset, once exceed the max value, there has the
chance to access wrong address, and crash may happen.
This patch checks iparea_offset and ipv6_prefixes_cnt before using them.
Fixes: e7b7a64a84 ("smc: support variable CLC proposal messages")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 679e9ddcf90dbdf98aaaa71a492454654b627bcb ]
When application sending data more than sndbuf_space, there have chances
application will sleep in epoll_wait, and will never be wakeup again. This
is caused by a race between smc_poll and smc_cdc_tx_handler.
application tasklet
smc_tx_sendmsg(len > sndbuf_space) |
epoll_wait for EPOLL_OUT,timeout=0 |
smc_poll |
if (!smc->conn.sndbuf_space) |
| smc_cdc_tx_handler
| atomic_add sndbuf_space
| smc_tx_sndbuf_nonfull
| if (!test_bit SOCK_NOSPACE)
| do not sk_write_space;
set_bit SOCK_NOSPACE; |
return mask=0; |
Application will sleep in epoll_wait as smc_poll returns 0. And
smc_cdc_tx_handler will not call sk_write_space because the SOCK_NOSPACE
has not be set. If there is no inflight cdc msg, sk_write_space will not be
called any more, and application will sleep in epoll_wait forever.
So check sndbuf_space again after NOSPACE flag is set to break the race.
Fixes: 8dce2786a2 ("net/smc: smc_poll improvements")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b33eb8f1b3e8c2f87cfdbc8cc117f6bdfabc6ec ]
link down work may be scheduled before lgr freed but execute
after lgr freed, which may result in crash. So it is need to
hold a reference before shedule link down work, and put the
reference after work executed or canceled.
The relevant crash call stack as follows:
list_del corruption. prev->next should be ffffb638c9c0fe20,
but was 0000000000000000
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:51!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 6 PID: 978112 Comm: kworker/6:119 Kdump: loaded Tainted: G #1
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 2221b89 04/01/2014
Workqueue: events smc_link_down_work [smc]
RIP: 0010:__list_del_entry_valid.cold+0x31/0x47
RSP: 0018:ffffb638c9c0fdd8 EFLAGS: 00010086
RAX: 0000000000000054 RBX: ffff942fb75e5128 RCX: 0000000000000000
RDX: ffff943520930aa0 RSI: ffff94352091fc80 RDI: ffff94352091fc80
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb638c9c0fc38
R10: ffffb638c9c0fc30 R11: ffffffffa015eb28 R12: 0000000000000002
R13: ffffb638c9c0fe20 R14: 0000000000000001 R15: ffff942f9cd051c0
FS: 0000000000000000(0000) GS:ffff943520900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4f25214000 CR3: 000000025fbae004 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
rwsem_down_write_slowpath+0x17e/0x470
smc_link_down_work+0x3c/0x60 [smc]
process_one_work+0x1ac/0x350
worker_thread+0x49/0x2f0
? rescuer_thread+0x360/0x360
kthread+0x118/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x1f/0x30
Fixes: 541afa10c1 ("net/smc: add smcr_port_err() and smcr_link_down() processing")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a24cae8fc1f13f6f6929351309f248fd2e9351ce upstream.
If growfsrt is run on a filesystem that doesn't have a rt volume, it's
possible to change the rt extent size. If the root directory was
previously set up with an inherited extent size hint and rtinherit, it's
possible that the hint is no longer a multiple of the rt extent size.
Although the verifiers don't complain about this, xfs_repair will, so if
we detect this situation, log the root directory to clean it up. This
is still racy, but it's better than nothing.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 16e1fbdce9c8d084863fd63cdaff8fb2a54e2f88 upstream.
Take the grow lock when we're expanding the realtime volume, like we do
for the other growfs calls.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6b35cc8d9239569700cc7cc737c8ed40b8b9cfdb upstream.
Use XFS_BUF_DADDR_NULL (instead of a magic sentinel value) to mean "this
field is null" like the rest of xfs.
Cc: wozizhi@huawei.com
Fixes: e89c041338 ("xfs: implement the GETFSMAP ioctl")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 68415b349f3f16904f006275757f4fcb34b8ee43 upstream.
I notice a rmap query bug in xfs_io fsmap:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv' /mnt
EXT: DEV BLOCK-RANGE OWNER FILE-OFFSET AG AG-OFFSET TOTAL
0: 253:16 [0..7]: static fs metadata 0 (0..7) 8
1: 253:16 [8..23]: per-AG metadata 0 (8..23) 16
2: 253:16 [24..39]: inode btree 0 (24..39) 16
3: 253:16 [40..47]: per-AG metadata 0 (40..47) 8
4: 253:16 [48..55]: refcount btree 0 (48..55) 8
5: 253:16 [56..103]: per-AG metadata 0 (56..103) 48
6: 253:16 [104..127]: free space 0 (104..127) 24
......
Bug:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv -d 0 3' /mnt
[root@fedora ~]#
Normally, we should be able to get one record, but we got nothing.
The root cause of this problem lies in the incorrect setting of rm_owner in
the rmap query. In the case of the initial query where the owner is not
set, __xfs_getfsmap_datadev() first sets info->high.rm_owner to ULLONG_MAX.
This is done to prevent any omissions when comparing rmap items. However,
if the current ag is detected to be the last one, the function sets info's
high_irec based on the provided key. If high->rm_owner is not specified, it
should continue to be set to ULLONG_MAX; otherwise, there will be issues
with interval omissions. For example, consider "start" and "end" within the
same block. If high->rm_owner == 0, it will be smaller than the founded
record in rmapbt, resulting in a query with no records. The main call stack
is as follows:
xfs_ioc_getfsmap
xfs_getfsmap
xfs_getfsmap_datadev_rmapbt
__xfs_getfsmap_datadev
info->high.rm_owner = ULLONG_MAX
if (pag->pag_agno == end_ag)
xfs_fsmap_owner_to_rmap
// set info->high.rm_owner = 0 because fmr_owner == -1ULL
dest->rm_owner = 0
// get nothing
xfs_getfsmap_datadev_rmapbt_query
The problem can be resolved by simply modify the xfs_fsmap_owner_to_rmap
function internal logic to achieve.
After applying this patch, the above problem have been solved:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv -d 0 3' /mnt
EXT: DEV BLOCK-RANGE OWNER FILE-OFFSET AG AG-OFFSET TOTAL
0: 253:16 [0..7]: static fs metadata 0 (0..7) 8
Fixes: e89c041338 ("xfs: implement the GETFSMAP ioctl")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8d16762047c627073955b7ed171a36addaf7b1ff upstream.
If a file has the S_DAX flag (aka fsdax access mode) set, we cannot
allow users to change the realtime flag unless the datadev and rtdev
both support fsdax access modes. Even if there are no extents allocated
to the file, the setattr thread could be racing with another thread
that has already started down the write code paths.
Fixes: ba23cba9b3 ("fs: allow per-device dax status checking for filesystems")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 73c34b0b85d46bf9c2c0b367aeaffa1e2481b136 upstream.
It turns out that I misunderstood the difference between the attr and
attr2 feature bits. "attr" means that at some point an attr fork was
created somewhere in the filesystem. "attr2" means that inodes have
variable-sized forks, but says nothing about whether or not there
actually /are/ attr forks in the system.
If we have an attr fork, we only need to check that attr is set.
Fixes: 99d9d8d05d ("xfs: scrub inode block mappings")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit af5d92f2fad818663da2ce073b6fe15b9d56ffdc upstream.
In the macro definition of XFS_DQUOT_LOGRES, a parameter is accepted,
but it is not used. Hence, it should be removed.
This patch has only passed compilation test, but it should be fine.
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0c7fcdb6d06cdf8b19b57c17605215b06afa864a upstream.
This adds sanity checks for xfs_dir2_data_unused and xfs_dir2_data_entry
to make sure don't stray beyond valid memory region. Before patching, the
loop simply checks that the start offset of the dup and dep is within the
range. So in a crafted image, if last entry is xfs_dir2_data_unused, we
can change dup->length to dup->length-1 and leave 1 byte of space. In the
next traversal, this space will be considered as dup or dep. We may
encounter an out of bound read when accessing the fixed members.
In the patch, we make sure that the remaining bytes large enough to hold
an unused entry before accessing xfs_dir2_data_unused and
xfs_dir2_data_unused is XFS_DIR2_DATA_ALIGN byte aligned. We also make
sure that the remaining bytes large enough to hold a dirent with a
single-byte name before accessing xfs_dir2_data_entry.
Signed-off-by: lei lu <llfamsec@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f23660f059470ec7043748da7641e84183c23bc8 upstream.
The RT extent range must be considered in the xfs_flush_unmap_range() call
to stabilize the boundary.
This code change is originally from Dave Chinner.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d3b689d7c711a9f36d3e48db9eaa75784a892f4c upstream.
Currently xfs_flush_unmap_range() does unmap for a full RT extent range,
which we also want to ensure is clean and idle.
This code change is originally from Dave Chinner.
Reviewed-by: Christoph Hellwig <hch@lst.de>4
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ee20808d848c87a51e176706d81b95a21747d6cf upstream.
[backport: dependency of d3b689d and f23660f]
Create a new helper function to calculate the fundamental allocation
unit (i.e. the smallest unit of space we can allocate) of a file.
Things are going to get hairy with range-exchange on the realtime
device, so prepare for this now.
Remove the static attribute from xfs_is_falloc_aligned since the next
patch will need it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 00acb28d96746f78389f23a7b5309a917b45c12f upstream.
[backport: dependency of d3b689d and f23660f]
Move the two public symbols in xfs_file.c to xfs_file.h. We're about to
add more public symbols in that source file, so let's finally create the
header file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 24a4e1cb322e2bf0f3a1afd1978b610a23aa8f36 upstream.
I noticed that callers of xfs_qm_vop_dqalloc use the following code to
compute the anticipated uid of the new file:
mapped_fsuid(idmap, &init_user_ns);
whereas the VFS uses a slightly different computation for actually
assigning i_uid:
mapped_fsuid(idmap, i_user_ns(inode));
Technically, these are not the same things. According to Christian
Brauner, the only time that inode->i_sb->s_user_ns != &init_user_ns is
when the filesystem was mounted in a new mount namespace by an
unpriviledged user. XFS does not allow this, which is why we've never
seen bug reports about quotas being incorrect or the uid checks in
xfs_qm_vop_create_dqattach tripping debug assertions.
However, this /is/ a logic bomb, so let's make the code consistent.
Link: https://lore.kernel.org/linux-fsdevel/20240617-weitblick-gefertigt-4a41f37119fa@brauner/
Fixes: c14329d39f ("fs: port fs{g,u}id helpers to mnt_idmap")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 150bb10a28b9c8709ae227fc898d9cf6136faa1e upstream.
generic/388 has an annoying tendency to fail like this during log
recovery:
XFS (sda4): Unmounting Filesystem 435fe39b-82b6-46ef-be56-819499585130
XFS (sda4): Mounting V5 Filesystem 435fe39b-82b6-46ef-be56-819499585130
XFS (sda4): Starting recovery (logdev: internal)
00000000: 49 4e 81 b6 03 02 00 00 00 00 00 07 00 00 00 07 IN..............
00000010: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 10 ................
00000020: 35 9a 8b c1 3e 6e 81 00 35 9a 8b c1 3f dc b7 00 5...>n..5...?...
00000030: 35 9a 8b c1 3f dc b7 00 00 00 00 00 00 3c 86 4f 5...?........<.O
00000040: 00 00 00 00 00 00 02 f3 00 00 00 00 00 00 00 00 ................
00000050: 00 00 1f 01 00 00 00 00 00 00 00 02 b2 74 c9 0b .............t..
00000060: ff ff ff ff d7 45 73 10 00 00 00 00 00 00 00 2d .....Es........-
00000070: 00 00 07 92 00 01 fe 30 00 00 00 00 00 00 00 1a .......0........
00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000090: 35 9a 8b c1 3b 55 0c 00 00 00 00 00 04 27 b2 d1 5...;U.......'..
000000a0: 43 5f e3 9b 82 b6 46 ef be 56 81 94 99 58 51 30 C_....F..V...XQ0
XFS (sda4): Internal error Bad dinode after recovery at line 539 of file fs/xfs/xfs_inode_item_recover.c. Caller xlog_recover_items_pass2+0x4e/0xc0 [xfs]
CPU: 0 PID: 2189311 Comm: mount Not tainted 6.9.0-rc4-djwx #rc4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20171121_152543-x86-ol7-builder-01.us.oracle.com-4.el7.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x60
xfs_corruption_error+0x90/0xa0
xlog_recover_inode_commit_pass2+0x5f1/0xb00
xlog_recover_items_pass2+0x4e/0xc0
xlog_recover_commit_trans+0x2db/0x350
xlog_recovery_process_trans+0xab/0xe0
xlog_recover_process_data+0xa7/0x130
xlog_do_recovery_pass+0x398/0x840
xlog_do_log_recovery+0x62/0xc0
xlog_do_recover+0x34/0x1d0
xlog_recover+0xe9/0x1a0
xfs_log_mount+0xff/0x260
xfs_mountfs+0x5d9/0xb60
xfs_fs_fill_super+0x76b/0xa30
get_tree_bdev+0x124/0x1d0
vfs_get_tree+0x17/0xa0
path_mount+0x72b/0xa90
__x64_sys_mount+0x112/0x150
do_syscall_64+0x49/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
XFS (sda4): Corruption detected. Unmount and run xfs_repair
XFS (sda4): Metadata corruption detected at xfs_dinode_verify.part.0+0x739/0x920 [xfs], inode 0x427b2d1
XFS (sda4): Filesystem has been shut down due to log error (0x2).
XFS (sda4): Please unmount the filesystem and rectify the problem(s).
XFS (sda4): log mount/recovery failed: error -117
XFS (sda4): log mount failed
This inode log item recovery failing the dinode verifier after
replaying the contents of the inode log item into the ondisk inode.
Looking back into what the kernel was doing at the time of the fs
shutdown, a thread was in the middle of running a series of
transactions, each of which committed changes to the inode.
At some point in the middle of that chain, an invalid (at least
according to the verifier) change was committed. Had the filesystem not
shut down in the middle of the chain, a subsequent transaction would
have corrected the invalid state and nobody would have noticed. But
that's not what happened here. Instead, the invalid inode state was
committed to the ondisk log, so log recovery tripped over it.
The actual defect here was an overzealous inode verifier, which was
fixed in a separate patch. This patch adds some transaction precommit
functions for CONFIG_XFS_DEBUG=y mode so that we can detect these kinds
of transient errors at transaction commit time, where it's much easier
to find the root cause.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7363f2d4c18557c99c536b70489187bb4e05c412 ]
Since commit f63b94be6942 ("i2c: pnx: Fix potential deadlock warning
from del_timer_sync() call in isr") jiffies are stored in
i2c_pnx_algo_data.timeout, but wait_timeout and wait_reset are still
using it as milliseconds. Convert jiffies back to milliseconds to wait
for the expected amount of time.
Fixes: f63b94be6942 ("i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr")
Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 360c400d0f568636c1b98d1d5f9f49aa3d420c70 ]
When drivers access P2SB device resources, it calls p2sb_bar(). Before
the commit 5913320eb0b3 ("platform/x86: p2sb: Allow p2sb_bar() calls
during PCI device probe"), p2sb_bar() obtained the resources and then
called pci_stop_and_remove_bus_device() for clean up. Then the P2SB
device disappeared. The commit 5913320eb0b3 introduced the P2SB device
resource cache feature in the boot process. During the resource cache,
pci_stop_and_remove_bus_device() is called for the P2SB device, then the
P2SB device disappears regardless of whether p2sb_bar() is called or
not. Such P2SB device disappearance caused a confusion [1]. To avoid the
confusion, avoid the pci_stop_and_remove_bus_device() call when the BIOS
does not hide the P2SB device.
For that purpose, cache the P2SB device resources only if the BIOS hides
the P2SB device. Call p2sb_scan_and_cache() only if p2sb_hidden_by_bios
is true. This allows removing two branches from p2sb_scan_and_cache().
When p2sb_bar() is called, get the resources from the cache if the P2SB
device is hidden. Otherwise, read the resources from the unhidden P2SB
device.
Reported-by: Daniel Walker (danielwa) <danielwa@cisco.com>
Closes: https://lore.kernel.org/lkml/ZzTI+biIUTvFT6NC@goliath/ [1]
Fixes: 5913320eb0b3 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241128002836.373745-5-shinichiro.kawasaki@wdc.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
