Pull spi updates from Mark Brown:
"A fairly standard release for SPI with the exception of a change to
the API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily
for a while.
There's also a new API to allow us to support TPM chips on half duplex
controllers.
Summary:
- Refactoring in preparation for supporting multiple chip selects for
a single device, needed by some flash devices, which required a
change in the SPI device API visible throughout the tree
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI
- Optimisation for large transfers on fsl-cpm devices
- Cleanups around device property use which fix some sisues with
fwnode
- Use of both void remove() and devm_platform_.*ioremap_resource()
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI"
* tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits)
spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: tegra210-quad: Enable TPM wait polling
spi: Add TPM HW flow flag
spi: bcm63xx: remove PM_SLEEP based conditional compilation
spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: spi-cadence: Add support for Slave mode
spi: spi-cadence: Switch to spi_controller structure
spi: cadence-quadspi: fix suspend-resume implementations
spi: dw: Add support for AMD Pensando Elba SoC
spi: dw: Add AMD Pensando Elba SoC SPI Controller
spi: cadence-quadspi: Disable the SPI before reconfiguring
spi: cadence-quadspi: Update the read timeout based on the length
spi: spi-loopback-test: Add module param for iteration length
spi: add support for Amlogic A1 SPI Flash Controller
dt-bindings: spi: add Amlogic A1 SPI controller
spi: fsl-spi: No need to check transfer length versus word size
spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
spi: fsl-spi: Fix CPM/QE mode Litte Endian
...
Pull sound updates from Takashi Iwai:
"At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including
addition of a no-DSP mode for bringup, HDA MLink and extensions to
the IPC4 protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas
R-Car Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements"
* tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits)
ALSA: emu10k1: use high-level I/O in set_filterQ()
ALSA: emu10k1: use high-level I/O functions also during init
ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()
ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
ALSA: emu10k1: fixup DSP defines
ALSA: emu10k1: pull in some register definitions from kX-project
ALSA: emu10k1: remove some bogus defines
ALSA: emu10k1: eliminate some unused defines
ALSA: emu10k1: fix lineup of EMU_HANA_* defines
ALSA: emu10k1: comment updates
ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field
ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
ALSA: emu10k1: minor optimizations
ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()
ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads
ALSA: emu10k1: remove apparently pointless FPGA reads
ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()
...
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
iterators
PCIe native device hotplug:
- Fix AB-BA deadlock between reset_lock and device_lock
Power management:
- Wait longer for devices to become ready after resume (as we do for
reset) to accommodate Intel Titan Ridge xHCI devices
- Extend D3hot delay for NVIDIA HDA controllers to avoid
unrecoverable devices after a bus reset
Error handling:
- Clear PCIe Device Status after EDR since generic error recovery now
only clears it when AER is native
ASPM:
- Work around Chromebook firmware defect that clobbers Capability
list (including ASPM L1 PM Substates Cap) when returning from
D3cold to D0
Freescale i.MX6 PCIe controller driver:
- Install imprecise external abort handler only when DT indicates
PCIe support
Freescale Layerscape PCIe controller driver:
- Add ls1028a endpoint mode support
Qualcomm PCIe controller driver:
- Add SM8550 DT binding and driver support
- Add SDX55 DT binding and driver support
- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3
- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0
- Add DT "mhi" register region for supported SoCs
- Expose link transition counts via debugfs to help debug low power
issues
- Support system suspend and resume; reduce interconnect bandwidth
and turn off clock and PHY if there are no active devices
- Enable async probe by default to reduce boot time
Miscellaneous:
- Sort controller Kconfig entries by vendor"
* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
...
The intention is to clean up the code and make it look a bit more
consistent.
Mark all unitialized module parameter variables as __read_mostly,
not just one of them. The other parameters are read-mostly too.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is a cleanup which improves code consistency. Move the force_irq_on
module parameter variable and definition to the same place where we have
variables and definitions for other module parameters.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
By default, all non-POLL C-states are entered with interrupts disabled.
There are 2 ways to make 'intel_idle' enter C-states with interrupts
enabled:
1. Mark the C-state with the CPUIDLE_FLAG_IRQ_ENABLE flag.
2. Use the force_irq_on module parameter.
The former is the "proper" way of doing it, it is per-C-state and
per-platform. The latter is for debugging purposes only.
The problem is that intel_idle prints the "forced intel_idle_irq"
message in both cases, even though the former case does not needed
this message, because nothing is forced there. This patch addresses the
problem.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The following C-state flags are currently mutually-exclusive and should not
be combined:
* IRQ_ENABLE
* IBRS
* XSTATE
There is a warning for the situation when the IRQ_ENABLE flag
is combined with the IBRS flag, but no warnings for other combinations.
This is inconsistent and prone to errors.
Improve the situation by adding warnings for all the unexpected
combinations. Add a couple of helpful commentaries too.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce a temporary 'state' variable for referencing the currently
processed C-state in the intel_idle_init_cstates_icpu() function.
This makes code lines shorter and easier to read.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The intel_idle_init_cstates_icpu() function includes a loop that iterates
over every C-state. Inside the loop, the same C-state data is referenced 2
ways:
1. as cpuidle_state_table[cstate]
2. as drv->states[drv->state_count] (but it is a copy of #1, not the same
object).
Make the code be more consistent and easier to read by using only the 2nd
way. So the code structure would be as follows:
1. Use cpuidle_state_table[cstate]
2. Copy cpuidle_state_table[cstate] to drv->states[drv->state_count]
3. Use only drv->states[drv->state_count] from this point.
Note, this change introduces a checkpatch.pl warning (too long line), but it
will be addressed in the next patch.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Substitute 'printk()' with 'pr_info()', because 'intel_idle' already uses
'pr_debug()', so using 'pr_info()' will be more consistent.
In addition to this, this patch addresses the following checkpatch.pl
warning:
WARNING: printk() should include KERN_<LEVEL> facility level
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to my information, there are no active users of this driver in
the field.
Moreover, it does some really questionable things and gets in the way of
thermal core improvements, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The ACPI thermal driver creates extra sysfs attributes in its own
directory pointing to the thermal zone it is related to and add a
pointer to the sysfs ACPI thermal device from the thermal zone sysfs
entry.
This is very specific to this ACPI thermal driver, let's encapsulate
the related creation/deletion code to group it inside a function we
can identify later for removal if needed.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Subject adjustment, removal of trailing white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to get the device associated with the thermal zone, let's use
the wrapper thermal_zone_device() instead of accessing directly the
content of the thermal zone device structure.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Subject adjustment, removal of trailing white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pch_critical() callback accesses the thermal zone device structure
internals, it dereferences the thermal zone struct device and the 'type'.
Use the available accessors instead of accessing the structure directly.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are still some drivers needing to play with the thermal zone
device internals. That is not the best but until we can figure out if
the information is really needed, let's encapsulate the field used in
the thermal zone device structure, so we can move forward relocating
the thermal zone device structure definition in the thermal framework
private headers.
Some drivers are accessing tz->device, that implies they need to have
the knowledge of the thermal_zone_device structure but we want to
self-encapsulate this structure and reduce the scope of the structure
to the thermal core only.
By adding this wrapper, these drivers won't need the thermal zone
device structure definition and are no longer an obstacle to its
relocation to the private thermal core headers.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For the algorithm of choosing the next target state in step_wise
governor, the code does the right thing but is implemented in a
way different from what the comment describes. And this hurts the code
readability.
As the logic in the comment is simpler, adjust the code logic to align
with the comment.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 4102c4042a ("thermal/core: Remove DROP_FULL and RAISE_FULL")
removes support for THERMAL_TREND_RAISE_FULL/DROP_FULL but leaves the
comment unchanged.
Delete the obsolte comment about THERMAL_TREND_RAISE_FULL/DROP_FULL.
Fixes: 4102c4042a ("thermal/core: Remove DROP_FULL and RAISE_FULL")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
The system refused to do a test_resume because it found that the
swap device has already been taken by someone else. Specifically,
the swsusp_check()->blkdev_get_by_dev(FMODE_EXCL) is supposed to
do this check.
Steps to reproduce:
dd if=/dev/zero of=/swapfile bs=$(cat /proc/meminfo |
awk '/MemTotal/ {print $2}') count=1024 conv=notrunc
mkswap /swapfile
swapon /swapfile
swap-offset /swapfile
echo 34816 > /sys/power/resume_offset
echo test_resume > /sys/power/disk
echo disk > /sys/power/state
PM: Using 3 thread(s) for compression
PM: Compressing and saving image data (293150 pages)...
PM: Image saving progress: 0%
PM: Image saving progress: 10%
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
PM: Image saving progress: 20%
PM: Image saving progress: 30%
PM: Image saving progress: 40%
PM: Image saving progress: 50%
pcieport 0000:00:02.5: pciehp: Slot(0-5): No device found
PM: Image saving progress: 60%
PM: Image saving progress: 70%
PM: Image saving progress: 80%
PM: Image saving progress: 90%
PM: Image saving done
PM: hibernation: Wrote 1172600 kbytes in 2.70 seconds (434.29 MB/s)
PM: S|
PM: hibernation: Basic memory bitmaps freed
PM: Image not found (code -16)
This is because when using the swapfile as the hibernation storage,
the block device where the swapfile is located has already been mounted
by the OS distribution(usually mounted as the rootfs). This is not
an issue for normal hibernation, because software_resume()->swsusp_check()
happens before the block device(rootfs) mount. But it is a problem for the
test_resume mode. Because when test_resume happens, the block device has
been mounted already.
Thus remove the FMODE_EXCL for test_resume mode. This would not be a
problem because in test_resume stage, the processes have already been
frozen, and the race condition described in
Commit 39fbef4b0f ("PM: hibernate: Get block device exclusively in swsusp_check()")
is unlikely to happen.
Fixes: 39fbef4b0f ("PM: hibernate: Get block device exclusively in swsusp_check()")
Reported-by: Yifan Li <yifan2.li@intel.com>
Suggested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is need to check snapshot_test and open block device
in different mode, so as to avoid the race condition.
No functional changes intended.
Suggested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull more thermal control changes for 6.4-rc1 from Daniel Lezcano:
"- Add compatible strings DT bindings for imx6sll and imx6ul to fix
dtbs check warning (Stefan Wahren)
- Update the example in the DT bindings to reflect changes with the
ADC node name for QCom TM and TM5 (Marijn Suijten)
- Fix the comments for the cpuidle_cooling_register() function to
match the function prototype (Chenggang Wang)
- Fix inconsistent temperature read and some Mediatek variant board
reboot by reverting a change and handling the temperature
differently (AngeloGioacchino Del Regno)
- Fix a memory leak in the initialization error path for the Mediatek
driver (Kang Chen)
- Use of_address_to_resource() in the Mediatek driver (Rob Herring)
- Fix unit address in the QCom tsens driver DT bindings (Krzysztof
Kozlowski)"
* tag 'thermal-v6.4-rc1-3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
dt-bindings: thermal: qcom-tsens: Correct unit address
thermal/drivers/mediatek: Use of_address_to_resource()
thermal/drivers/mediatek: Change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe
thermal/drivers/mediatek: Add temperature constraints to validate read
Revert "thermal/drivers/mediatek: Add delay after thermal banks initialization"
thermal/drivers/cpuidle_cooling: Delete unmatched comments
dt-bindings: thermal: Use generic ADC node name in examples
dt-bindings: imx-thermal: Add imx6sll and imx6ul compatible
The Wi-Fi module in x86 Apple machines has a "module-instance" device
property that specifies the platform type and is used for firmware
selection. Its value is a string, so add support for string values in
acpi_extract_apple_properties().
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The LSM303D on the Lenovo Yoga Tablet 2 series is present
as both ACCL0001 and MAGN0001. As we can only ever register an
i2c client for one of them, ignore MAGN0001.
Currently this errors:
i2c i2c-4: Failed to register i2c client MAGN0001:00 at 0x1d (-16)
Tested on a Lenovo Yoga Tablet 2 1051-F.
Signed-off-by: Marius Hoch <mail@mariushoch.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The CPR3 power resource on the Toshiba Click Mini toggles a GPIO
which is called SISP (for SIS touchscreen power?) on/off.
This CPR3 power resource is not listed in any _PR? lists, let alone
in a _PR0 list for the SIS0817 touchscreen ACPI device which needs it.
Before commit a1224f34d7 ("ACPI: PM: Check states of power resources
during initialization") this was not an issue because since nothing
referenced the CPR3 power resource its state was always
ACPI_POWER_RESOURCE_STATE_UNKNOWN and power resources with this state
get ignored by acpi_turn_off_unused_power_resources().
This clearly is a bug in the DSDT of this device. Add a DMI quirk
to make acpi_turn_off_unused_power_resources() a no-op on this
model to fix the touchscreen no longer working since kernel 5.16 .
This quirk also causes 2 other power resources to not get turned
off, but the _OFF method on these already was a no-op, so this makes
no difference for the other 2 power resources.
Fixes: a1224f34d7 ("ACPI: PM: Check states of power resources during initialization")
Reported-by: Gé Koerkamp <ge.koerkamp@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216946
Link: https://lore.kernel.org/regressions/32a14a8a-9795-4c8c-7e00-da9012f548f8@leemhuis.info/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull iommufd updates from Jason Gunthorpe:
"Two series:
- Reorganize how the hardware page table objects are managed,
particularly their destruction flow. Increase the selftest test
coverage in this area by creating a more complete mock iommu
driver.
This is preparation to add a replace operation for HWPT binding,
which is done but waiting for the VFIO parts to complete so there
is a user.
- Split the iommufd support for "access" to make it two step -
allocate an access then link it to an IOAS. Update VFIO and have
VFIO always create an access even for the VFIO mdevs that never do
DMA.
This is also preperation for the replace VFIO series that will
allow replace to work on access types as well.
Three minor fixes:
- Sykzaller found the selftest code didn't check for overflow when
processing user VAs
- smatch noted a .data item should have been static
- Add a selftest that reproduces a syzkaller bug for batch carry
already fixed in rc"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (21 commits)
iommufd/selftest: Cover domain unmap with huge pages and access
iommufd/selftest: Set varaiable mock_iommu_device storage-class-specifier to static
vfio: Check the presence for iommufd callbacks in __vfio_register_dev()
vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers
vfio-iommufd: Make vfio_iommufd_emulated_bind() return iommufd_access ID
vfio-iommufd: No need to record iommufd_ctx in vfio_device
iommufd: Create access in vfio_iommufd_emulated_bind()
iommu/iommufd: Pass iommufd_ctx pointer in iommufd_get_ioas()
iommufd/selftest: Catch overflow of uptr and length
iommufd/selftest: Add a selftest for iommufd_device_attach() with a hwpt argument
iommufd/selftest: Make selftest create a more complete mock device
iommufd/selftest: Rename the remaining mock device_id's to stdev_id
iommufd/selftest: Rename domain_id to hwpt_id for FIXTURE iommufd_mock_domain
iommufd/selftest: Rename domain_id to stdev_id for FIXTURE iommufd_ioas
iommufd/selftest: Rename the sefltest 'device_id' to 'stdev_id'
iommufd: Make iommufd_hw_pagetable_alloc() do iopt_table_add_domain()
iommufd: Move iommufd_device to iommufd_private.h
iommufd: Move ioas related HWPT destruction into iommufd_hw_pagetable_destroy()
iommufd: Consistently manage hwpt_item
iommufd: Add iommufd_lock_obj() around the auto-domains hwpts
...
We should not cache deferred file handles if we dont have
handle lease on a file. And we should immediately close all
deferred handles in case of handle lease break.
Fixes: 9e31678fb4 ("SMB3: fix lease break timeout when multiple deferred close handles for the same file.")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_del_deferred_close function has a critical section which modifies
the deferred close file list. We must acquire deferred_lock before
calling cifs_del_deferred_close function.
Fixes: ca08d0eac0 ("cifs: Fix memory leak on the deferred close")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Acked-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull drm fixes from Dave Airlie:
"A bit out of routine fixes pull for rc1.
There's a build breakage on some platforms due to ttm, this has that
fix + qaic uapi removal + minor panel fixes.
ttm:
- Fix TTM build on archs where PMD_SHIFT is not constant
qaic:
- Revert uAPI from accel/qaic
panel:
- Improve error handling in nt35950
- Fix double unregister in otm8009a when removing the driver"
* tag 'drm-next-2023-04-27' of git://anongit.freedesktop.org/drm/drm:
drm/panel: novatek-nt35950: Only unregister DSI1 if it exists
drm/panel: otm8009a: Set backlight parent to panel device
drm/panel: novatek-nt35950: Improve error handling
drm/ttm: revert "Reduce the number of used allocation orders for TTM pages"
Revert "accel/qaic: Add mhi_qaic_cntl"
After upgrading build guests to v6.3, rpm started segfaulting for
specific packages, which was bisected to commit 0503ea8f5b ("mm/mmap:
remove __vma_adjust()"). rpm is doing many mremap() operations with file
mappings of its db. The problem is that in vma_merge() case 3 (we merge
with the next vma, expanding it downwards) vm_pgoff is not adjusted as
it should when vm_start changes. As a result the rpm process most likely
sees data from the wrong offset of the file. Fix the vm_pgoff
calculation.
For case 8 this is a non-functional change as the resulting vm_pgoff is
the same.
Reported-and-bisected-by: Jiri Slaby <jirislaby@kernel.org>
Reported-and-tested-by: Fabian Vogt <fvogt@suse.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1210903
Fixes: 0503ea8f5b ("mm/mmap: remove __vma_adjust()")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geetha sowjanya says:
====================
Macsec fixes for CN10KB
This patch set has fixes for the issues encountered while
testing macsec on CN10KB silicon. Below is the description
of patches:
Patch 1: For each LMAC two MCSX_MCS_TOP_SLAVE_CHANNEL_CFG registers exist
in CN10KB. Bypass has to be disabled in two registers.
Patch 2: Add workaround for errata w.r.t accessing TCAM DATA and MASK registers.
Patch 3: Fixes the parser configuration to allow PTP traffic.
Patch 4: Addresses the IP vector and block level interrupt mask changes.
Patch 5: Fix NULL pointer crashes when rebooting
Patch 6: Since MCS is global block shared by all LMACS the TCAM match
must include macsec DMAC also to distinguish each macsec interface
Patch 7: Before freeing MCS hardware resource to AF clear the stats also.
Patch 8: Stats which share single counter in hardware are tracked in software.
This tracking was based on wrong secy mode params.
Use correct secy mode params
Patch 9: When updating secy mode params, PN number was also reset to
initial values. Hence do not write to PN value register when
updating secy.
====================
Link: https://lore.kernel.org/r/20230426062528.20575-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After creating SecYs, SCs and SAs a SecY can be modified
to change attributes like validation mode, protect frames
mode etc. During this SecY update, packet number is reset to
initial user given value by mistake. Hence do not reset
PN when updating SecY parameters.
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Macsec stats like InPktsLate and InPktsDelayed share
same counter in hardware. If SecY replay_protect is true
then counter represents InPktsLate otherwise InPktsDelayed.
This mode change was tracked based on protect_frames
instead of replay_protect mistakenly. Similarly InPktsUnchecked
and InPktsOk share same counter and mode change was tracked
based on validate_check instead of validate_disabled.
This patch fixes those problems.
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When freeing MCS hardware resources like SecY, SC and
SA the corresponding stats needs to be cleared. Otherwise
previous stats are shown in newly created macsec interfaces.
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On CN10KB silicon a single hardware macsec block is
present and offloads macsec operations for all the
ethernet LMACs. TCAM match with macsec ethertype 0x88e5
alone at RX side is not sufficient to distinguish all the
macsec interfaces created on top of netdevs. Hence append
the DMAC of the macsec interface too. Otherwise the first
created macsec interface only receives all the macsec traffic.
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On CN10KB, MCS IP vector number, BBE and PAB interrupt mask
got changed to support more block level interrupts.
To address this changes, this patch fixes the bbe and pab
interrupt handlers.
Fixes: 6c635f78c4 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When ptp timestamp is enabled in RPM, RPM will append 8B
timestamp header for all RX traffic. MCS need to skip these
8 bytes header while parsing the packet header, so that
correct tcam key is created for lookup.
This patch fixes the mcs parser configuration to skip this
8B header for ptp packets.
Fixes: ca7f49ff88 ("octeontx2-af: cn10k: Introduce driver for macsec block.")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As per hardware errata on CN10KB, all the four TCAM_DATA
and TCAM_MASK registers has to be written at once otherwise
write to individual registers will fail. Hence write to all
TCAM_DATA registers and then to all TCAM_MASK registers.
Fixes: cfc14181d4 ("octeontx2-af: cn10k: mcs: Manage the MCS block hardware resources")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
