HDMI 2.0 recommends that we set the Q bits in the AVI infoframe
even when the sink does not support quantization range selection (QS=0).
According to CEA-861 we can do that as long as the Q we send matches
the default quantization range for the mode.
Previously I think I had misread the spec as saying that you can't
send a non-zero Q at all when QS=0. But that's not what the spec
actually says.
v2: Fix typo in commit message (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 779c4c2866)
Change-Id: Ic006e2a2a9ac2f1ab105c595bc4a62c0918c6dff
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
This patch adds a new RGB media bus formats that describe
18-bit samples transferred over an LVDS bus with three
differential data pairs, serialized into 7 time slots,
using standard JEIDA data ordering.
Change-Id: Ia0bedd53e57aa34829a0d61b144aa99a1c98cffd
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
Programmable THRE Interrupt mode in order to increase system
performance.
Change-Id: Ic1ef9ecae0c6feb00170ad97ee3c6245ca3bf068
Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>
rk817/rk809 must restore the PMIC_POWER_EN OTP value before the system reboot.
Change-Id: I2ccfbb4d47eb41cdcea048111873b6ab85477d64
Signed-off-by: Shengfei Xu <xsf@rock-chips.com>
If support wide temperature, it necessary to set voltage to low temperature
voltage before system suspend, so that it can resume successfully at low
temperature.
Change-Id: Ie6787092c9510788054217bd830b5ae1e4dd6bc2
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
The ATF must contain the following commit:
cd61876e275e ("plat: rk3399: ddr: add support adjust noc read latency")
Change-Id: I322f8c9d454fb1234b042438c85521275ceda4bc
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
If an xhci platform needs to enable the ENT flag in the TRB
to force the xHC to pre-fetch the next TRB of a TD, then
add the XHCI_TRB_ENT_QUIRK flag.
Change-Id: Ib7cc095a848f0846ad995529ad703ae4e4ee4d44
Signed-off-by: William Wu <william.wu@rock-chips.com>
If you try to store u64 in a kfifo (or a struct with u64 members),
then the buf member of __STRUCT_KFIFO_PTR will cause 4 bytes
padding due to alignment (note that struct __kfifo is 20 bytes
on 32 bit).
That in turn causes the __is_kfifo_ptr() to fail, which is caught
by kfifo_alloc(), which now returns EINVAL.
So, ensure that __is_kfifo_ptr() compares to the right structure.
Change-Id: I7b5c8415a6bb8f54bbc8ec50fa98e1803cda3ce8
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
(cherry picked from commit 8a866fee39)
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
This patch adds more generic PHY modes to the phy_mode enum, to
allow configuring generic PHYs to the MIPI/LVDS/TTL mode by
using the set_mode callback.
Change-Id: Ib6966828011aa52f1f133449f69df46c2001a57b
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
Add static inline for sip_smc_lastlog_request() when
CONFIG_ROCKCHIP_SIP is not enabled.
Change-Id: I8fe46c36b115b4aa8a71a4101a7829e64aa08103
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* linux-linaro-lsk-v4.4-android: (812 commits)
Linux 4.4.167
mac80211: ignore NullFunc frames in the duplicate detection
mac80211: fix reordering of buffered broadcast packets
mac80211: ignore tx status for PS stations in ieee80211_tx_status_ext
mac80211: Clear beacon_int in ieee80211_do_stop
mac80211_hwsim: Timer should be initialized before device registered
kgdboc: fix KASAN global-out-of-bounds bug in param_set_kgdboc_var()
tty: serial: 8250_mtk: always resume the device in probe.
cifs: Fix separator when building path from dentry
Staging: lustre: remove two build warnings
xhci: Prevent U1/U2 link pm states if exit latency is too long
SUNRPC: Fix leak of krb5p encode pages
virtio/s390: fix race in ccw_io_helper()
virtio/s390: avoid race on vcdev->config
ALSA: pcm: Fix interval evaluation with openmin/max
ALSA: pcm: Call snd_pcm_unlink() conditionally at closing
ALSA: pcm: Fix starvation on down_write_nonblock()
ALSA: hda: Add support for AMD Stoney Ridge
ALSA: usb-audio: Fix UAF decrement if card has no live interfaces in card.c
USB: check usb_get_extra_descriptor for proper size
...
Conflicts:
drivers/gpu/drm/rockchip/rockchip_drm_drv.c
drivers/usb/host/xhci-ring.c
Change-Id: I4304b0875908403a7d88a0d77da52cea04563c11
Support of 0.5% down-spread is required for DisplayPort Specification
Version 1.1 Sink.
Change-Id: Ia1a3036e36a95638e90da3e76fece7897a0883be
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
[treding@nvidia.com: rename to DP_MAX_DOWNSPREAD_0_5]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
(cherry-picked from 56c5da0027)
commit 5363857b91 upstream.
As addressed in alsa-lib (commit b420056604f0), we need to fix the
case where the evaluation of PCM interval "(x x+1]" leading to
-EINVAL. After applying rules, such an interval may be translated as
"(x x+1)".
Fixes: ff2d6acdf6 ("ALSA: pcm: Fix snd_interval_refine first/last with open min/max")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3756f6401c upstream.
gcc-8 warns about using strncpy() with the source size as the limit:
fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
This is indeed slightly suspicious, as it protects us from source
arguments without NUL-termination, but does not guarantee that the
destination is terminated.
This keeps the strncpy() to ensure we have properly padded target
buffer, but ensures that we use the correct length, by passing the
actual length of the destination buffer as well as adding a build-time
check to ensure it is exactly TASK_COMM_LEN.
There are only 23 callsites which I all reviewed to ensure this is
currently the case. We could get away with doing only the check or
passing the right length, but it doesn't hurt to do both.
Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Aleksa Sarai <asarai@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* linux-linaro-lsk-v4.4: (622 commits)
Linux 4.4.166
drm/ast: Remove existing framebuffers before loading driver
s390/mm: Check for valid vma before zapping in gmap_discard
namei: allow restricted O_CREAT of FIFOs and regular files
sched/core: Allow __sched_setscheduler() in interrupts when PI is not used
btrfs: Ensure btrfs_trim_fs can trim the whole filesystem
usb: xhci: fix uninitialized completion when USB3 port got wrong status
tty: wipe buffer if not echoing data
tty: wipe buffer.
iwlwifi: mvm: fix regulatory domain update when the firmware starts
scsi: qla2xxx: do not queue commands when unloading
scsi: ufshcd: release resources if probe fails
scsi: ufs: fix race between clock gating and devfreq scaling work
scsi: ufshcd: Fix race between clk scaling and ungate work
scsi: ufs: fix bugs related to null pointer access and array size
netfilter: nf_tables: fix oops when inserting an element into a verdict map
mwifiex: fix p2p device doesn't find in scan problem
mwifiex: Fix NULL pointer dereference in skb_dequeue()
cw1200: Don't leak memory if krealloc failes
Input: xpad - add support for Xbox1 PDP Camo series gamepad
...
Conflicts:
Makefile
arch/x86/Makefile
drivers/base/power/main.c
drivers/block/zram/zram_drv.c
kernel/debug/kdb/kdb_io.c
net/ipv6/route.c
scripts/Kbuild.include
Conflicts in above files are fixed as done in AOSP Change-Id:
I5bd20327e0c1139c46f74e8d5916fa0530a307d3 ("Merge 4.4.165 into android-4.4").
arch/arm64/include/asm/cpufeature.h
arch/arm64/kernel/cpufeature.c
Conflicts in above files is due to AOSP Change-Id:
I11cb874d12a7d0921f452c62b0752e0028a8e0a7 ("FROMLIST: arm64: entry: Add
fake CPU feature for unmapping the kernel at EL0"), which needed a minor
rebasing.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Since nothing is using the 2-phase API, and it adds more complexity than
benefit, remove it.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
(cherry picked from commit 8112c4f140)
Bug: 119769499
Change-Id: Iff6246c1e6e9dd0161b80b666a5e796f78a5c785
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Currently, if arch code wants to supply seccomp_data directly to
seccomp (which is generally much faster than having seccomp do it
using the syscall_get_xyz() API), it has to use the two-phase
seccomp hooks. Add it to the easy hooks, too.
Cc: linux-arch@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
(cherry picked from commit 2f275de5d1)
Bug: 119769499
Change-Id: I96876ecd8d1743c289ecef6d2deb65361d1f5baa
[ghackmann@google.com: drop changes to parisc, tile, and um, which
didn't implement seccomp support in this kernel version]
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
* origin/upstream-f2fs-stable-linux-4.4.y:
f2fs: guarantee journalled quota data by checkpoint
f2fs: cleanup dirty pages if recover failed
f2fs: fix data corruption issue with hardware encryption
f2fs: fix to recover inode->i_flags of inode block during POR
f2fs: spread f2fs_set_inode_flags()
f2fs: fix to spread clear_cold_data()
Revert "f2fs: fix to clear PG_checked flag in set_page_dirty()"
f2fs: account read IOs and use IO counts for is_idle
f2fs: fix to account IO correctly for cgroup writeback
f2fs: fix to account IO correctly
f2fs: remove request_list check in is_idle()
f2fs: allow to mount, if quota is failed
f2fs: update REQ_TIME in f2fs_cross_rename()
f2fs: do not update REQ_TIME in case of error conditions
f2fs: remove unneeded disable_nat_bits()
f2fs: remove unused sbi->trigger_ssr_threshold
f2fs: shrink sbi->sb_lock coverage in set_file_temperature()
f2fs: fix to recover cold bit of inode block during POR
f2fs: submit cached bio to avoid endless PageWriteback
f2fs: checkpoint disabling
...
Conflicts:
fs/f2fs/data.c
Change-Id: I95097a969bbd23c2009106b07be8a1eeec675b1c
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
This is a different approach from the first attempt in f2c6df7dbf
("loop: support 4k physical blocksize"). Rather than extending
LOOP_{GET,SET}_STATUS, add a separate ioctl just for setting the block
size.
Bug: 117823094
Change-Id: I8e69b8839d7fee3be564cbfce1797ce108e1aa1e
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 89e4fdecb5)
Signed-off-by: Martijn Coenen <maco@android.com>
(cherry picked from commit 6edf1ad773)
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
This can be done with c99 initializers, which makes the code cleaner
and more transparent. It does require gcc 4.6, because of this bug
in earlier versions:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676
Since commit cafa0010cd ("Raise the minimum required gcc version to
4.6"), this is the case.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
(cherry picked from commit 183e19f5b9)
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Conflicts:
drivers/media/pci/cx88/cx88-input.c
drivers/media/rc/imon_raw.c
drivers/media/rc/mceusb.c
drivers/media/rc/meson-ir.c
drivers/media/rc/mtk-cir.c
drivers/media/rc/redrat3.c
drivers/media/rc/sir_ir.c
drivers/media/rc/st_rc.c
Any spaces events received after a reset or startup should be discarded,
so ensure the rc device is in idle mode.
This also makes it much easier to detect incorrect raw events, as we will
do in a following commit.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
(cherry picked from commit e0d51e6cef)
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Since the kernel now modifies the timeout, make it possible to retrieve
the current value.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
(cherry picked from commit 95d1544eb6)
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Conflicts:
Documentation/media/uapi/rc/lirc-set-rec-timeout.rst
Meson doesn't seem to be able to generate timeout events in hardware. So
install a software timer to generate the timeout events required by the
decoders to prevent "ghost keypresses".
Reported-by: Matthias Reichl <hias@horus.com>
Tested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
(cherry picked from commit 8d7a77ce56)
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Conflicts:
drivers/media/rc/meson-ir.c
This makes it possible to use the various iMON remotes with any raw IR
RC device.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
(cherry picked from commit 447dcc0cf1)
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
