If the gadget driver doesn't specify a max_speed, then use the
controller's maximum supported speed as default. For DWC_usb32 IP, the
gadget's speed maybe limited to gen2x1 rate only if the driver's
max_speed is unknown. This scenario should not occur with the current
implementation since the default gadget driver's max_speed should always
be specified. However, to make the driver more robust and help with
readability, let's cover all the scenarios in __dwc3_gadget_set_speed().
Fixes: 450b9e9fab ("usb: dwc3: gadget: Set speed only up to the max supported")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/55ac7001af73bfe9bc750c6446ef4ac8cf6f9313.1615254129.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ACPI probe starts failing since commit bea46b9815 ("usb: dwc3:
qcom: Add interconnect support in dwc3 driver"), because there is no
interconnect support for ACPI, and of_icc_get() call in
dwc3_qcom_interconnect_init() will just return -EINVAL.
Fix the problem by skipping interconnect init for ACPI probe, and then
the NULL icc_path_ddr will simply just scheild all ICC calls.
Fixes: bea46b9815 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311060318.25418-1-shawn.guo@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pfn variable contains the page frame number as returned by the
pXX_pfn() functions, shifted to the right by PAGE_SHIFT to remove the
page bits. After page protection computations are done to it, it gets
shifted back to the physical address using page_level_shift().
That is wrong, of course, because that function determines the shift
length based on the level of the page in the page table but in all the
cases, it was shifted by PAGE_SHIFT before.
Therefore, shift it back using PAGE_SHIFT to get the correct physical
address.
[ bp: Rewrite commit message. ]
Fixes: dfaaec9033 ("x86: Add support for changing memory encryption attribute in early boot")
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/81abbae1657053eccc535c16151f63cd049dcb97.1616098294.git.isaku.yamahata@intel.com
Commit a05829a722 ("cfg80211: avoid holding the RTNL when calling the
driver") replaced the rtnl_lock parameter passed to various brcmf
functions with just lock, because since that commit it is not just
about the rtnl_lock but also about the wiphy_lock .
During this search/replace the "if (!rtnl_locked)" check in brcmfmac/p2p.c
was accidentally replaced with "if (locked)", dropping the inversion of
the check. This causes the code to now call rtnl_lock() while already
holding the lock, causing a deadlock.
Add back the "!" to the if-condition to fix this.
Cc: Johannes Berg <johannes.berg@intel.com>
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210313143635.109154-1-hdegoede@redhat.com
The structures are used as place holders, so they are modified at run-time.
Obviously they may not be constants.
BUG: unable to handle page fault for address: d0643220
...
CPU: 0 PID: 110 Comm: modprobe Not tainted 5.11.0+ #1
Hardware name: Intel Corp. QUARK/GalileoGen2, BIOS 0x01000200 01/01/2014
EIP: intel_quark_mfd_probe+0x93/0x1c0 [intel_quark_i2c_gpio]
This partially reverts the commit c4a164f415.
While at it, add a comment to avoid similar changes in the future.
Fixes: c4a164f415 ("mfd: Constify static struct resources")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Tested-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
DPU runtime resume will request for a min vote on the AXI bus as
it is a necessary step before turning ON the AXI clock.
The change does below
1) Move the icc path set before requesting runtime get_sync.
2) remove the dependency of hw catalog for min ib vote
as it is initialized at a later point.
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use a temporary variable to hold the return value from
dsa_tag_driver_get() instead of assigning it to dst->tag_ops. Leaving
an error value in dst->tag_ops can result in deferencing an invalid
pointer when a deferred switch configuration happens later.
Fixes: 357f203bb3 ("net: dsa: keep a copy of the tagging protocol in the DSA switch tree")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed says:
====================
mlx5 fixes 2021-03-22
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc-11 complains about a prototype declaration that is different
from the function definition:
drivers/isdn/capi/kcapi.c:724:44: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
724 | u16 capi20_get_manufacturer(u32 contr, u8 *buf)
| ~~~~^~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:62:43: note: previously declared as an array ‘u8[64]’ {aka ‘unsigned char[64]’}
62 | u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]);
| ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/isdn/capi/kcapi.c:790:38: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
790 | u16 capi20_get_serial(u32 contr, u8 *serial)
| ~~~~^~~~~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:64:37: note: previously declared as an array ‘u8[8]’ {aka ‘unsigned char[8]’}
64 | u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]);
| ~~~^~~~~~~~~~~~~~~~~~~~~~~
Change the definition to make them match.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pseries join/suspend sequence in its current form was written with
the assumption that it was the only user of H_PROD and that it needn't
handle spurious successful returns from H_JOIN. That's wrong;
powerpc's paravirt spinlock code uses H_PROD, and CPUs entering
do_join() can be woken prematurely from H_JOIN with a status of
H_SUCCESS as a result. This causes all CPUs to exit the sequence
early, preventing suspend from occurring at all.
Add a 'done' boolean flag to the pseries_suspend_info struct, and have
the waking thread set it before waking the other threads. Threads
which receive H_SUCCESS from H_JOIN retry if the 'done' flag is still
unset.
Fixes: 9327dc0aee ("powerpc/pseries/mobility: use stop_machine for join/suspend")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315080045.460331-3-nathanl@linux.ibm.com
Clang doesn't like format strings that truncate a 32-bit
value to something shorter:
kernel/locking/lockdep.c:709:4: error: format specifies type 'short' but the argument has type 'int' [-Werror,-Wformat]
In this case, the warning is a slightly questionable, as it could realize
that both class->wait_type_outer and class->wait_type_inner are in fact
8-bit struct members, even though the result of the ?: operator becomes an
'int'.
However, there is really no point in printing the number as a 16-bit
'short' rather than either an 8-bit or 32-bit number, so just change
it to a normal %d.
Fixes: de8f5e4f2d ("lockdep: Introduce wait-type checks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210322115531.3987555-1-arnd@kernel.org
Device firmware doesn't handle ecpu bit for vhca state processing
events and commands. Instead device firmware refers to the unique
function id to distinguish SF of different PCI functions.
When ecpu bit is used, firmware returns a syndrome.
mlx5_cmd_check:780:(pid 872): MODIFY_VHCA_STATE(0xb0e) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x263211)
mlx5_sf_dev_table_create:248:(pid 872): SF DEV table create err = -22
Hence, avoid using ecpu bit.
Fixes: 8f01054186 ("net/mlx5: SF, Add port add delete functionality")
Fixes: 90d010b863 ("net/mlx5: SF, Add auxiliary device support")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5e_select_queue compares num_tc_x_num_ch to real_num_tx_queues to
determine if HTB and/or PTP offloads are active. If they are, it
calculates netdev_pick_tx() % num_tc_x_num_ch to prevent it from
selecting HTB and PTP queues for regular traffic. However, before the
channels are first activated, num_tc_x_num_ch is zero. If
ndo_select_queue gets called at this point, the HTB/PTP check will pass,
and mlx5e_select_queue will attempt to take a modulo by num_tc_x_num_ch,
which equals to zero.
This commit fixes the bug by assigning num_tc_x_num_ch to a non-zero
value before registering the netdev.
Fixes: 214baf2287 ("net/mlx5e: Support HTB offload")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Setting connection tracking OVS flows and then setting non-CT flows that
use tuple rewrite action (e.g. mod_tp_dst), causes the latter flows not
being offloaded.
Fix by using a stricter condition in modify_header_match_supported() to
check tuple rewrite support only for flows with CT action. The check is
factored out into standalone modify_tuple_supported() function to aid
readability.
Fixes: 7e36feeb04 ("net/mlx5e: CT: Don't offload tuple rewrites for established tuples")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, we support hardware offload only for MPLS over UDP.
However, rules matching on MPLS parameters are now wrongly offloaded
for regular MPLS, without actually taking the parameters into
consideration when doing the offload.
Fix it by rejecting such unsupported rules.
Fixes: 72046a91d1 ("net/mlx5e: Allow to match on mpls parameters")
Signed-off-by: Alaa Hleihel <alaa@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The multicast counter got removed from uplink representor due to the
cited patch.
Fixes: 47c97e6b10 ("net/mlx5e: Fix multicast counter not up-to-date in "ip -s"")
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
ic_close_dev contains a generalization of the logic to not close a
network interface if it's the host port for a DSA switch. This logic is
disguised behind an iteration through the lowers of ic_dev in
ic_close_dev.
When no interface for ipconfig can be found, ic_dev is NULL, and
ic_close_dev:
- dereferences a NULL pointer when assigning selected_dev
- would attempt to search through the lower interfaces of a NULL
net_device pointer
So we should protect against that case.
The "lower_dev" iterator variable was shortened to "lower" in order to
keep the 80 character limit.
Fixes: f68cbaed67 ("net: ipconfig: avoid use-after-free in ic_close_devs")
Fixes: 46acf7bdbc ("Revert "net: ipv4: handle DSA enabled master network devices"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GFX is in gfxoff mode during s0ix so we shouldn't need to
actually tear anything down and restore it.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed as the device is in gfxoff state so the CG/PG state
is handled just like it would be for gfxoff during runtime gfxoff.
This should also prevent delays on resume.
Reworked from Pratik's original patch (Alex)
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Provide and explanation as to why we skip GFX and PSP for
S0ix. GFX goes into gfxoff, same as runtime, so no need
to tear down and re-init. PSP is part of the always on
state, so no need to touch it.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMU expects CGPG to be enabled when entering S0ix.
with this we can re-enable SMU suspend.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This really needs to be done to properly tear down
the device. SMC, PSP, and GFX are still problematic,
need to dig deeper into what aspect of them that is
problematic.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the non-DC specific code into the DCE IP blocks similar
to how we handle DC. This cleans up the common suspend
and resume pathes.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vram is system memory, so no need to evict.
v2: use PM_EVENT messages
v3: use correct dev
v4: use driver flags
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set flags at the top level pmops callbacks to track
state. This cleans up the current set of flags and
properly handles S4 on S0ix capable systems.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull selinux fixes from Paul Moore:
"Three SELinux patches:
- Fix a problem where a local variable is used outside its associated
function. Thankfully this can only be triggered by reloading the
SELinux policy, which is a restricted operation for other obvious
reasons.
- Fix some incorrect, and inconsistent, audit and printk messages
when loading the SELinux policy.
All three patches are relatively minor and have been through our
testing with no failures"
* tag 'selinux-pr-20210322' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinuxfs: unify policy load error reporting
selinux: fix variable scope issue in live sidtab conversion
selinux: don't log MAC_POLICY_LOAD record on failed policy load
The copy_to_user() function returns the number of bytes remaining to be
copied, but we want to return -EFAULT if the copy doesn't complete.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The decrementation of acpi_device_bus_id->instance_no
in acpi_device_del() is incorrect, because it may cause
a duplicate instance number to be allocated next time
a device with the same acpi_device_bus_id is added.
Replace above mentioned approach by using IDA framework.
While at it, define the instance range to be [0, 4096).
Fixes: e49bd2dd5a ("ACPI: use PNPID:instance_no as bus_id of ACPI device")
Fixes: ca9dc8d42b ("ACPI / scan: Fix acpi_bus_id_list bookkeeping")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When a DM device is first created it doesn't yet have an established
capacity, therefore the use of set_capacity_and_notify() should be
conditional given the potential for needless pr_info "detected
capacity change" noise even if capacity is 0.
One could argue that the pr_info() in set_capacity_and_notify() is
misplaced, but that position is not held uniformly.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: f64d9b2eac ("dm: use set_capacity_and_notify")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 24f6b6036c ("dm table: fix zoned iterate_devices based device
capability checks") triggered dm table load failure when dm-zoned device
is set up for zoned block devices and a regular device for cache.
The commit inverted logic of two callback functions for iterate_devices:
device_is_zoned_model() and device_matches_zone_sectors(). The logic of
device_is_zoned_model() was inverted then all destination devices of all
targets in dm table are required to have the expected zoned model. This
is fine for dm-linear, dm-flakey and dm-crypt on zoned block devices
since each target has only one destination device. However, this results
in failure for dm-zoned with regular cache device since that target has
both regular block device and zoned block devices.
As for device_matches_zone_sectors(), the commit inverted the logic to
require all zoned block devices in each target have the specified
zone_sectors. This check also fails for regular block device which does
not have zones.
To avoid the check failures, fix the zone model check and the zone
sectors check. For zone model check, introduce the new feature flag
DM_TARGET_MIXED_ZONED_MODEL, and set it to dm-zoned target. When the
target has this flag, allow it to have destination devices with any
zoned model. For zone sectors check, skip the check if the destination
device is not a zoned block device. Also add comments and improve an
error message to clarify expectations to the two checks.
Fixes: 24f6b6036c ("dm table: fix zoned iterate_devices based device capability checks")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Three optional parameters must be accepted at once in a DM verity table, e.g.:
(verity_error_handling_mode) (ignore_zero_block) (check_at_most_once)
Fix this to be possible by incrementing DM_VERITY_OPTS_MAX.
Signed-off-by: JeongHyeon Lee <jhs2.lee@samsung.com>
Fixes: 843f38d382 ("dm verity: add 'check_at_most_once' option to only validate hashes once")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
gcc warns about an empty body in an else statement:
drivers/dax/bus.c: In function 'do_id_store':
drivers/dax/bus.c:94:48: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
94 | /* nothing to remove */;
| ^
drivers/dax/bus.c:99:43: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
99 | /* dax_id already added */;
| ^
In both of these cases, the 'else' exists only to have a place to
add a comment, but that comment doesn't really explain that much
either, so the easiest way to shut up that warning is to just
remove the else.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210322114514.3490752-1-arnd@kernel.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Because the PM-runtime status of the device is not updated in
__rpm_callback(), attempts to suspend the suppliers of the given
device triggered by the rpm_put_suppliers() call in there may
cause a supplier to be suspended completely before the status of
the consumer is updated to RPM_SUSPENDED, which is confusing.
To avoid that (1) modify __rpm_callback() to only decrease the
PM-runtime usage counter of each supplier and (2) make rpm_suspend()
try to suspend the suppliers after changing the consumer's status to
RPM_SUSPENDED, in analogy with the device's parent.
Link: https://lore.kernel.org/linux-pm/CAPDyKFqm06KDw_p8WXsM4dijDbho4bb6T4k50UqqvR1_COsp8g@mail.gmail.com/
Fixes: 21d5c57b37 ("PM / runtime: Use device links")
Reported-by: elaine.zhang <zhangqing@rock-chips.com>
Diagnosed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The "First Fault Register" (FFR) is an SVE register that mimics a
predicate register, but clears bits when a load or store fails to handle
an element of a vector. The supposed usage scenario is to initialise
this register (using SETFFR), then *read* it later on to learn about
elements that failed to load or store. Explicit writes to this register
using the WRFFR instruction are only supposed to *restore* values
previously read from the register (for context-switching only).
As the manual describes, this register holds only certain values, it:
"... contains a monotonic predicate value, in which starting from bit 0
there are zero or more 1 bits, followed only by 0 bits in any remaining
bit positions."
Any other value is UNPREDICTABLE and is not supposed to be "restored"
into the register.
The SVE test currently tries to write a signature pattern into the
register, which is *not* a canonical FFR value. Apparently the existing
setups treat UNPREDICTABLE as "read-as-written", but a new
implementation actually only stores canonical values. As a consequence,
the sve-test fails immediately when comparing the FFR value:
-----------
# ./sve-test
Vector length: 128 bits
PID: 207
Mismatch: PID=207, iteration=0, reg=48
Expected [cf00]
Got [0f00]
Aborted
-----------
Fix this by only populating the FFR with proper canonical values.
Effectively the requirement described above limits us to 17 unique
values over 16 bits worth of FFR, so we condense our signature down to 4
bits (2 bits from the PID, 2 bits from the generation) and generate the
canonical pattern from it. Any bits describing elements above the
minimum 128 bit are set to 0.
This aligns the FFR usage to the architecture and fixes the test on
microarchitectures implementing FFR in a more restricted way.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviwed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210319120128.29452-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Memory hotplug may fail on systems with CONFIG_RANDOMIZE_BASE because the
linear map range is not checked correctly.
The start physical address that linear map covers can be actually at the
end of the range because of randomization. Check that and if so reduce it
to 0.
This can be verified on QEMU with setting kaslr-seed to ~0ul:
memstart_offset_seed = 0xffff
START: __pa(_PAGE_OFFSET(vabits_actual)) = ffff9000c0000000
END: __pa(PAGE_END - 1) = 1000bfffffff
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Fixes: 58284a901b ("arm64/mm: Validate hotplug range before creating linear mapping")
Tested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20210216150351.129018-2-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
