when boot and resume,the fw should load/reload,this will take up
much time in the main thread,so here add a thread to load/reload
fw in order to void this situation.
Change-Id: Ic1a67fd662b0406ede08b0aeb944525fabc519e6
Signed-off-by: buluess.li <buluess.li@rock-chips.com>
* linux-linaro-lsk-v4.4-android: (521 commits)
Linux 4.4.66
ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
ARCv2: save r30 on kernel entry as gcc uses it for code-gen
nfsd: check for oversized NFSv2/v3 arguments
Input: i8042 - add Clevo P650RS to the i8042 reset list
p9_client_readdir() fix
MIPS: Avoid BUG warning in arch_check_elf
MIPS: KGDB: Use kernel context for sleeping threads
ALSA: seq: Don't break snd_use_lock_sync() loop by timeout
ALSA: firewire-lib: fix inappropriate assignment between signed/unsigned type
ipv6: check raw payload size correctly in ioctl
ipv6: check skb->protocol before lookup for nexthop
macvlan: Fix device ref leak when purging bc_queue
ip6mr: fix notification device destruction
netpoll: Check for skb->queue_mapping
net: ipv6: RTF_PCPU should not be settable from userspace
dp83640: don't recieve time stamps twice
tcp: clear saved_syn in tcp_disconnect()
sctp: listen on the sock only when it's state is listening or closed
net: ipv4: fix multipath RTM_GETROUTE behavior when iif is given
...
Conflicts:
drivers/usb/dwc3/gadget.c
include/linux/usb/quirks.h
Change-Id: I490f766b9a530b10da3107e20709538e4536a99d
commit 92461f5d72 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory that lie beyond the end of the endpoint
array should a malicious device lack the expected endpoints.
Fixes: bdb5c57f20 ("Input: add sur40 driver for Samsung SUR40... ")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gslxxxx wrong irq number with the same vopb, may cause vopb abnormal.
ts->irq is gpio number, gslxxxx irq number is ts->client->irq
ts->client->irq = gpio_to_irq(ts->irq)
Change-Id: Ic1f6a46437a2a185f3218d3f0406deeddd9d670a
Signed-off-by: Bin Yang <yangbin@rock-chips.com>
* linux-linaro-lsk-v4.4-android: (1362 commits)
Linux 4.4.30
Revert "fix minor infoleak in get_user_ex()"
Revert "x86/mm: Expand the exception table logic to allow new handling options"
Linux 4.4.29
ARM: pxa: pxa_cplds: fix interrupt handling
powerpc/nvram: Fix an incorrect partition merge
mpt3sas: Don't spam logs if logging level is 0
perf symbols: Fixup symbol sizes before picking best ones
perf symbols: Check symbol_conf.allow_aliases for kallsyms loading too
perf hists browser: Fix event group display
clk: divider: Fix clk_divider_round_rate() to use clk_readl()
clk: qoriq: fix a register offset error
s390/con3270: fix insufficient space padding
s390/con3270: fix use of uninitialised data
s390/cio: fix accidental interrupt enabling during resume
x86/mm: Expand the exception table logic to allow new handling options
dmaengine: ipu: remove bogus NO_IRQ reference
power: bq24257: Fix use of uninitialized pointer bq->charger
staging: r8188eu: Fix scheduling while atomic splat
ASoC: dapm: Fix kcontrol creation for output driver widget
...
commit e9003c9cfa upstream.
Passes input_id struct to the common probe function for the tsc200x drivers
instead of just the bustype.
This allows for the use of the product variable to set the input_dev->name
variable according to the type of touchscreen used. Note that when we
introduced support for TSC2004 we started calling everything TSC200X, so
let's keep this quirk.
Signed-off-by: Michael Welling <mwelling@ieee.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* linux-linaro-lsk-v4.4-android: (797 commits)
parisc: Use generic extable search and sort routines
arm64: kasan: Use actual memory node when populating the kernel image shadow
arm64: mm: treat memstart_addr as a signed quantity
arm64: lse: deal with clobbered IP registers after branch via PLT
arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly
arm64: kasan: Fix zero shadow mapping overriding kernel image shadow
arm64: consistently use p?d_set_huge
arm64: fix KASLR boot-time I-cache maintenance
arm64: hugetlb: partial revert of 66b3923a1a
arm64: make irq_stack_ptr more robust
arm64: efi: invoke EFI_RNG_PROTOCOL to supply KASLR randomness
efi: stub: use high allocation for converted command line
efi: stub: add implementation of efi_random_alloc()
efi: stub: implement efi_get_random_bytes() based on EFI_RNG_PROTOCOL
arm64: kaslr: randomize the linear region
arm64: add support for kernel ASLR
arm64: add support for building vmlinux as a relocatable PIE binary
arm64: switch to relative exception tables
extable: add support for relative extables to search and sort routines
scripts/sortextable: add support for ET_DYN binaries
...
Conflicts:
arch/arm64/mm/dma-mapping.c
drivers/clk/rockchip/clk-rk3368.c
drivers/mmc/core/core.c
drivers/mmc/core/sdio.c
include/linux/dcache.h
Change-Id: Ibaa1e90ac735db8d9f5e542c266ef27b91616ef4
commit 6984ab1ab3 upstream.
A wrong decoding of the touch coordinate message causes a wrong touch
ID. Touch ID for dual touch must be 0 or 1.
According to the actual Neonode nine byte touch coordinate coding,
the state is transported in the lower nibble and the touch ID in
the higher nibble of payload byte five.
Signed-off-by: Knut Wohlrab <Knut.Wohlrab@de.bosch.com>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fb_event would only carry the data number in some special notify action,
other actions wouldn't carry an valid data number, and in this case
kernel would crash, logs like:
[ 4.129846] Unable to handle kernel paging request at virtual address 200000000000
......
[ 4.164618] Hardware name: Rockchip RK3399 Evaluation Board v1 (Chrome OS) (DT)
[ 4.184624] PC is at fb_notifier_callback+0x28/0xac
[ 4.189497] LR is at notifier_call_chain+0x74/0xb4
[ 4.194279] pc : [<ffffffc0005e1468>] lr : [<ffffffc0000b5ba4>] pstate: 20000045
......
[ 5.703780] [<ffffffc0005e1468>] fb_notifier_callback+0x28/0xac
[ 5.709690] [<ffffffc0000b5ba4>] notifier_call_chain+0x74/0xb4
[ 5.715504] [<ffffffc0000b5e70>] __blocking_notifier_call_chain+0x48/0x64
[ 5.722280] [<ffffffc0000b5ea0>] blocking_notifier_call_chain+0x14/0x1c
[ 5.728885] [<ffffffc00036fd98>] fb_notifier_call_chain+0x20/0x28
[ 5.734969] [<ffffffc0003726c0>] register_framebuffer+0x218/0x250
[ 5.741054] [<ffffffc0003b7598>] drm_fb_helper_initial_config+0x2f8/0x374
[ 5.747832] [<ffffffc0003e056c>] rockchip_drm_fbdev_init+0xa8/0xe8
[ 5.754002] [<ffffffc0003dba24>] rockchip_drm_load+0x1e4/0x25c
Change-Id: I3314315a31bbab43489fca85dabc4c6511fc9dee
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
On the moment, the gt9xx touchscreen driver can't work on chromeos.
Since the driver report event has *not* judge correct by the chromeos.
We need report the singel point touch information for event firstly,
otherwise the chromeos will force a signel point to work.
That's seem a chromeos issue/leak.
Anyway, we can report the point including the signal information
to workaround.
Verify on rk3399evb board with chromeos.
root@localhost / # evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: goodix-ts
/dev/input/event1: rk29-keypad
Select the device event number [0-1]: 0
Input driver version is 1.0.1
Input device ID: bus 0x18 vendor 0xdead product 0xbeef version 0x28bb
Input device name: "goodix-ts"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 330 (BTN_TOUCH)
Event type 3 (EV_ABS)
Event code 0 (ABS_X)
...
Event: time 1450321044.293221, type 3 (EV_ABS), code 57 (ABS_MT_TRACKING_ID), value 0
Event: time 1450321044.293221, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 4095
Event: time 1450321044.293221, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 4083
Event: time 1450321044.293221, type 3 (EV_ABS), code 48 (ABS_MT_TOUCH_MAJOR), value 8
Event: time 1450321044.293221, type 3 (EV_ABS), code 50 (ABS_MT_WIDTH_MAJOR), value 8
Event: time 1450321044.293221, -------------- SYN_REPORT ------------
Event: time 1450321044.384655, type 3 (EV_ABS), code 57 (ABS_MT_TRACKING_ID), value -1
Event: time 1450321044.384655, -------------- SYN_REPORT ------------
Change-Id: Ic41327a673632e471429ded35b68eecbbd7f3069
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Make it possible to specify the supply of a regulator, through the
tp-supply property in dt.
Change-Id: If741bb48280a339fc37e9f53d566fbbb444c31e8
Signed-off-by: Shengfei xu <xsf@rock-chips.com>
Add support gt9xx driver for Rockchip platform goodix
touchscreen.
There is a goodix driver on upstream but it not work well, so
use the old driver until someone debug the upstream driver.
Change-Id: Id8711a63150da4bdcd8e78f3b2a82157e1b3de4f
Signed-off-by: Xu Jianqun <jay.xu@rock-chips.com>
When sending "SLEEP" command to the controller it ceases scanning
completely and is unable to wake the system up from sleep, so if it is
configured as a wakeup source we should simply configure interrupt for
wakeup and rely on idle logic within the controller to reduce power
consumption while it is not used.
Signed-off-by: James Chen <james.chen@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Atmel maxtouch DT binding documents that the compatible string for
the device is "atmel,maxtouch" and the I2C core always reports a module
alias of the form i2c:alias where alias is the compatible string model:
$ grep MODALIAS /sys/devices/platform/12e00000.i2c/i2c-8/8-004b/uevent
MODALIAS=i2c:maxtouch
But there isn't maxtouch entry in the I2C device ID table so when the
i2c:maxtouch MODALIAS uevent is reported, kmod is not able to match the
alias with a module to load:
$ modinfo atmel_mxt_ts | grep alias
alias: of:N*T*Catmel,maxtouch
alias: i2c:mXT224
alias: i2c:atmel_mxt_tp
alias: i2c:atmel_mxt_ts
alias: i2c:qt602240_ts
So add the maxtouch entry to the I2C device ID table to allow the module
to be autoloaded when the device is registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Apparently people are installing generic Linux distributions not only on
Pixels but also on other Chromebooks. Unfortunately on all of them Atmel
parts assigned names ATML0000 and ATML0001, and do not carry any other
configuration data. So let's create generic instance of platform data that
should cover most of them (we assume that they will not be using T100
objects, since with those Google mapped BTN_LEFT onto a different GPIO, so
slightly different keymap would be needed, but I think we used parts with
T100 on ARM devices where we thankfully have DTS and can describe the
devices better).
Tested-by: Rich K <rgkirch@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull more input updates from Dmitry Torokhov:
"An update to the tsc2005 driver that allows it to also support tsc2004
(basically the same controller, but uses i2c instead of spi bus), and
a couple of bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: parkbd - drop bogus __init from parkbd_allocate_serio()
Input: elantech - add Fujitsu Lifebook U745 to force crc_enabled
Input: tsc2004 - add support for tsc2004
Input: tsc200x-core - rename functions and variables
Input: tsc2005 - separate SPI and core functions
Pull input updates from Dmitry Torokhov:
"Items of note:
- evdev users can now limit or mask the kind of events they will
receive. This will allow applications such as power manager or
network manager to only be woken when user presses special keys
such as KEY_POWER or KEY_WIFI and not be bothered with ordinary
key presses coming from keyboard
- support for FocalTech FT6236 touchscreen controller
- support for ROHM BU21023/24 touchscreen controller
- edt-ft5x06 touchscreen driver got a face lift and can now be used
with FT5506
- support for Google Fiber TV Box remote controls
- improvements in xpad driver (with more to come)
- several parport-based drivers have been switched to the new device
model
- other miscellaneous driver improvements"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (70 commits)
HID: hid-gfrm: avoid warning for input_configured API change
HID: hid-input: allow input_configured callback return errors
Input: evdev - fix bug in checking duplicate clock change request
Input: add userio module
Input: evdev - add event-mask API
Input: snvs_pwrkey - remove duplicated semicolon
HID: hid-gfrm: Google Fiber TV Box remote controls
Input: e3x0-button - update Kconfig description
Input: tegra-kbc - drop use of IRQF_NO_SUSPEND flag
Input: tegra-kbc - enable support for the standard "wakeup-source" property
Input: xen - check return value of xenbus_printf
Input: hp_sdc_rtc - fix y2038 problem in proc_show
Input: nomadik-ske-keypad - fix a trivial typo
Input: xpad - fix clash of presence handling with LED setting
Input: edt-ft5x06 - work around FT5506 firmware bug
Input: edt-ft5x06 - add support for FT5506
Input: edt-ft5x06 - add support for different max support points
Input: edt-ft5x06 - use max support points to determine how much to read
Input: rotary-encoder - add support for quarter-period mode
Input: rotary-encoder - use of_property_read_bool
...
Pull spi updates from Mark Brown:
"Quite a lot of activity in SPI this cycle, almost all of it in drivers
with a few minor improvements and tweaks in the core.
- Updates to pxa2xx to support Intel Broxton and multiple chip selects.
- Support for big endian in the bcm63xx driver.
- Multiple slave support for the mt8173
- New driver for the auxiliary SPI controller in bcm2835 SoCs.
- Support for Layerscale SoCs in the Freescale DSPI driver"
* tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI
spi: pxa2xx: Add support for Intel Broxton
spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals
spi: pxa2xx: Add output control for multiple Intel LPSS chip selects
spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific
spi: Add DSPI support for layerscape family
spi: ti-qspi: improve ->remove() callback
spi/spi-xilinx: Fix race condition on last word read
spi: Drop owner assignment from spi_drivers
spi: Add THIS_MODULE to spi_driver in SPI core
spi: Setup the master controller driver before setting the chipselect
spi: dw: replace magic constant by DW_SPI_DR
spi: mediatek: mt8173 spi multiple devices support
spi: mediatek: handle controller_data in mtk_spi_setup
spi: mediatek: remove mtk_spi_config
spi: mediatek: Update document devicetree bindings to support multiple devices
spi: fix kernel-doc warnings about missing return desc in spi.c
spi: fix kernel-doc warnings about missing return desc in spi.h
spi: pxa2xx: Align a few defines
spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select
...
