firmware: tegra: Changes for v4.13-rc1
This contains a fix for missing semaphore release in error paths as well
as a bogus error code return in the BPMP firmware implementation.
* tag 'tegra-for-4.13-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Fix locking bugs in BPMP
Signed-off-by: Olof Johansson <olof@lixom.net>
soc/tegra: Changes for v4.13-rc1
This contains an implementation of generic PM domains for Tegra186,
based on the BPMP powergate request.
* tag 'tegra-for-4.13-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: flowctrl: Fix error handling
soc/tegra: bpmp: Implement generic PM domains
soc/tegra: bpmp: Update ABI header
PM / Domains: Allow overriding the ->xlate() callback
Signed-off-by: Olof Johansson <olof@lixom.net>
ARMv8 Vexpress/Juno DT updates for v4.13
1. Adds support for Coresight CPU debug MMIO interface on all Juno variants.
2. Enables support for few SMMUs on Juno which were previously disabled
waiting for IOMMU-backed DMA API support to be stabilised.
* tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: enable some SMMUs
arm64: dts: juno: add coresight CPU debug nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Each Octeon output ring can DMA packets to host memory in two modes: info-
pointer mode and buffer-pointer-only mode. In info-pointer mode, Octeon
takes two buffer pointers for each packet and places the length of the
packet along with specified number of bytes from the beginning of the
packet into one buffer and the rest of the packet in a separate buffer. In
buffer-pointer-only mode, Octeon takes single buffer pointer and places the
length of the packet at the beginning of the buffer followed by the packet
data.
This patch switches all Octeon output rings from info-pointer mode to
buffer-pointer-only mode. This results in fewer DMA setups and cache line
snoops.
Signed-off-by: Prasad Kanneganti <pkanneganti@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SCPI update for v4.13
Adds support to get DVFS transition latency and OPP for any device whose
DVFS are managed by SCPI. This avoids code duplication in both cpufreq
and devfreq SCPI drivers.
* tag 'scpi-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
cpufreq: scpi: use new scpi_ops functions to remove duplicate code
firmware: arm_scpi: add support to populate OPPs and get transition latency
Signed-off-by: Olof Johansson <olof@lixom.net>
Variable opt in pptp_release() is set but never used, thus needs to be
removed.
Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add implementation to support ethtool -K ethX rx-vlan-filter on/off.
Rename OCTNET_CMD_ENABLE_VLAN_FILTER command to OCTNET_CMD_VLAN_FILTER_CTL
and add OCTNET_CMD_VLAN_FILTER_ENABLE and OCTNET_CMD_VLAN_FILTER_DISABLE
parameters so that it can be used to enable or disable the filter.
Signed-off-by: Prasad Kanneganti <prasad.kanneganti@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the pxa changes for v4.13 cycle.
This cycle is a minor fixes one, with :
- Coccinelle found improvements
- magician getting touchscreen driver support.
* tag 'pxa-for-4.13' of https://github.com/rjarzmik/linux:
ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe()
ARM: pxa: Improve a size determination in pxa3xx_u2d_probe()
ARM: pxa: Delete an error message for a failed memory allocation in pxa_pm_init()
ARM: pxa: magician: Add support for ADS7846 touchscreen
Signed-off-by: Olof Johansson <olof@lixom.net>
SoC changes for omap variants for v4.13 merge window:
- PM clean-up in preparation of adding am335x/am437x PM support
- Fixes for issues found by Coccinelle
- Legacy code removal now that everything boots in device
tree only mode
- Interconnect changes in preparation of moving clkctrl clocks
to be managed by clkctrl clock driver
- Interconnect changes to add omap4 crypto acceclerator
support
* tag 'omap-for-v4.13/soc-v4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits)
ARM: OMAP4: hwmod_data: add SHAM crypto accelerator
ARM: OMAP4: hwmod data: add des
ARM: OMAP4: hwmod data: add aes2
ARM: OMAP4: hwmod data: add aes1
ARM: OMAP2+: Remove unused legacy code for n8x0
ARM: OMAP2+: Remove unused legacy code for watchdog
ARM: OMAP2+: Remove unused legacy code for interconnects
ARM: OMAP2+: Remove unused legacy code for PRM
ARM: OMAP2+: Remove unused legacy code for io.c
ARM: OMAP2+: Remove unused legacy code for McBSP
ARM: OMAP2+: SmartReflex: Delete an error message for a failed memory allocation in two functions
ARM: OMAP2+: Use kcalloc() in sr_set_nvalues()
ARM: OMAP2+: Improve a size determination in sr_dev_init()
ARM: OMAP2+: Delete an error message for a failed memory allocation in two functions
ARM: OMAP2+: Remove unused legacy code for device init
ARM: OMAP2+: Remove unused legacy code for PMU
ARM: OMAP2+: Remove unused legacy code for opp
ARM: OMAP2+: hwmod: populate clkctrl clocks for hwmods if available
ARM: OMAP4: cminst: add support for clkdm_xlate_address
ARM: omap2+: clockdomain: add clkdm_xlate_address
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Allwinner H5 DT changes for 4.13
Just like the H3, this is mostly about enabling the EMAC on the H5, and
also has a new board, the Orange Pi Zero Plus 2
* tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: h5: Add initial Orangepi Zero Plus 2 support
arm64: allwinner: h5: enable dwmac-sun8i for Nano Pi NEO2
arm64: allwinner: h5: enable dwmac-sun8i for Orange Pi Prime
arm64: allwinner: h5: sort the device nodes in / part for some boards
arm64: allwinner: h5: add support for NanoPi NEO2 board
arm64: allwinner: h5: add support for Orange Pi Prime board
arm64: allwinner: orangepi-pc2: Enable dwmac-sun8i
arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros
Signed-off-by: Olof Johansson <olof@lixom.net>
Allwinner H3 changes for 4.13
This tag is about bringing the EMAC support to the H3 boards.
* tag 'sunxi-dt-h3-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E
arm: sun8i: orangepi-zero: Enable dwmac-sun8i
ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i
ARM: sun8i: orangepi-plus: Enable dwmac-sun8i
arm: sun8i: nanopi-neo: Enable dwmac-sun8i
arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high
arm: sun8i: orangepi-2: Enable dwmac-sun8i
arm: sun8i: orangepi-one: Enable dwmac-sun8i
arm: sun8i: orangepi-pc: Enable dwmac-sun8i
arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros
Signed-off-by: Olof Johansson <olof@lixom.net>
Allwinner fixes for 4.12
A few fixes around the PRCM support that got in 4.12 with a wrong
compatible, and a missing clock in the binding.
* tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
arm64: allwinner: h5: Remove syslink to shared DTSI
ARM: sunxi: h3/h5: fix the compatible of R_CCU
Signed-off-by: Olof Johansson <olof@lixom.net>
Allwinner arm64 DT changes for 4.13
Our usual arm64 changes. The most notable things are the EMAC support and
USB support enhancements. There's also support for the SoPine SoM, and the
OrangePi Win.
* tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support
arm64: allwinner: a64: add device tree for SoPine with baseboard
arm64: allwinner: bananapi-m64: Enable dwmac-sun8i
arm64: allwinner: pine64-plus: Enable dwmac-sun8i
arm64: allwinner: pine64: Enable dwmac-sun8i
arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver
arm64: allwinner: sun50i-a64: Add dt node for the syscon control module
arm64: allwinner: a64: add DTSI file for SoPine SoM
arm64: allwinner: a64: Convert CCU raw number references to macros
arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl
arm64: allwinner: a64: enable RSB on A64
arm64: dts: allwinner: pine64: Add remaining UART aliases
arm64: dts: allwinner: a64: Add UART2 pin nodes
arm64: allwinner: a64: enable EHCI0/OHCI0 for Pine64
arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI
Signed-off-by: Olof Johansson <olof@lixom.net>
Allwinner DT changes for 4.13
The usual chunk of patches. The most notable improvements are the power
supplies improvements (battery and AC-IN), crypto support for the sun5i
family, HDMI support for the A10s, plus a lot of new things for the V3S and
the A83T.
* tag 'sunxi-dt-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (47 commits)
ARM: sun6i: a31s: primo81: Enable battery power supply
ARM: sun6i: a31s: primo81: Change USB OTG to OTG mode
ARM: sun8i: a83t: Add dt node for the syscon control module
ARM: sun8i: a83t: Add device node for R_PIO
ARM: sun8i: v3s: add device nodes for DE2 display pipeline
ARM: dts: sunxi: add SoC specific compatibles for the crypto nodes
ARM: sun5i: add a cryptographic engine node
ARM: sun8i: a83t: Add device node for PRCM
ARM: dts: sun8i: h3: Add initial NanoPi M1 Plus support
ARM: dts: orange-pi-zero: add node for SPI NOR
ARM: sun7i: a20: cubietruck: Tie AXP209's USB power supply to USB PHY
ARM: sun6i: a31: hummingbird: Enable AXP221's ACIN power supply
ARM: sun4i: a10: cubieboard: Enable AXP209's ACIN power supply
ARM: sun7i: a20: bananapi-m1-plus: Enable AXP209's ACIN power supply
ARM: sun7i: a20: cubieboard2: Enable AXP209's ACIN power supply
ARM: sun7i: a20: cubieboard2: Move usb_otg node for alphabetical ordering
ARM: sun8i: a83t: cubietruck-plus: Enable SPDIF output
ARM: sun8i: a83t: cubietruck-plus: Add LED device nodes
ARM: sun8i: a83t: Add device node for SPDIF transmitter
ARM: sun8i: a83t: Add device node for DMA controller
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Amlogic 32-bit DT changes for v4.13:
- minor reorganization to support different busses
- add/use real clock controller
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8: add and use the real clock controller
ARM: dts: meson: Extend L2 cache controller node for Meson8 and Meson8b
ARM: dts: meson8b: inherit meson.dtsi from meson8b.dtsi
ARM: dts: meson: organize devices in their corresponding busses
Signed-off-by: Olof Johansson <olof@lixom.net>
Amlogic arm64 defconfig changes for v4.13
- enable meson SPICC as module
- enable IR core, decoders and Meson IR device
* tag 'amlogic-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: defconfig: enable meson SPICC as module
ARM64: defconfig: enable IR core, decoders and Meson IR device
Signed-off-by: Olof Johansson <olof@lixom.net>
Amlogic SoC updates for v4.13
- enable the clock controller for 32-bit Meson8
* tag 'amlogic-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm: meson: select the clock controller for Meson8
Signed-off-by: Olof Johansson <olof@lixom.net>
A series of omap1 changes for issues found by Coccinelle.
* tag 'omap-for-v4.13/omap1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: Fix a typo in a comment line
ARM: OMAP1: Delete an error message for a failed memory allocation in omap1_dm_timer_init()
ARM: OMAP1: DMA: Delete an unnecessary return statement in omap1_show_dma_caps()
ARM: OMAP1: DMA: Delete an error message for a failed memory allocation in omap1_system_dma_init()
ARM: OMAP1: DMA: Improve a size determination in omap1_system_dma_init()
Signed-off-by: Olof Johansson <olof@lixom.net>
Gemini DTS patches for v4.13, take 2:
- Add DMA controller
- Add PATA controller and SATA bridge
* tag 'gemini-v4.13-dts-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: add Gemini PATA/SATA support
ARM: dts: Add Gemini DMA controller
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM/ARM64 SoCs specific driver changes for
4.13, please pull the following:
- Doug adds support for the latest generation GISB bus arbiter (v7), he starts by
fixing two issues in how registers are written, and how 64-bit addresses are captured
and then he simplifies the error interception by using notifiers, which allows him
to add support for ARM64
- Markus updates the SOC_BRCMSTB Kconfig depends to cover ARM64 and BMIPS_GENERIC
systems where this code is now also used
* tag 'arm-soc/for-4.13/drivers' of http://github.com/Broadcom/stblinux:
soc: brcmstb: enable drivers for ARM64 and BMIPS
bus: brcmstb_gisb: update to support new revision
bus: brcmstb_gisb: enable driver for ARM64 architecture
bus: brcmstb_gisb: remove low-level ARM hooks
bus: brcmstb_gisb: add notifier handling
bus: brcmstb_gisb: correct support for 64-bit address output
bus: brcmstb_gisb: Use register offsets with writes too
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM-based SoCs defconfig updates for 4.13,
please pull the following:
- Stefan updates the bcm2835_defconfig to include serial, Ethernet and USB
gadget support which is needed for the Raspberry Pi Zero OTG changes
* tag 'arm-soc/for-4.13/defconfig' of http://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Enable serial & ethernet USB gadget support
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM-based SoCs MAINTAINERS file updates for
4.13, please pull the following:
- Eric updates the BCM283X section and removes Lee Jones who has not been active for
over a year in the Raspberry Pi kernel development
* tag 'arm-soc/for-4.13/maintainers' of http://github.com/Broadcom/stblinux:
MAINTAINERS: Remove Lee Jones from bcm2835.
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains ARM64 defconfig changes for 4.13, please pull the
following:
- Florian enables ARCH_BRCMSTB in the arm64 defconfig to get more build coverage
* tag 'arm-soc/for-4.13/defconfig-arm64' of http://github.com/Broadcom/stblinux:
arm64: defconfig: Enable ARCH_BRCMSTB
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
4.13. Please note the following from Eric:
I've based this summary on the bcm2835-dt-next tag, to clarify what's in this
patch series, but it does require being careful since it involves a cross-merge
between branches.
- Anup documents the Broadcom Stingray binding, common clocks, adds initial
support for the Stingray DTSI and DTS files and adds support for the PL022,
PL330 and SP805
- Sandeep adds the clock nodes to the Stingray Device Tree nodes
- Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes
- Oza adds I2C Device Tree nodes to the Stingray DTSes
- Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC
- Ravijeta adds support for the USB Dual Role PHY on Northstar 2
- Gerd starts adding references to the sdhost and sdhci controllers, and then
switches the sdcard to to use the SDHOST (faster than SDHCI)
- Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi
thermal driver to work correctly
* tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux:
arm64: dts: NS2: Add USB DRD PHY device tree node
ARM64: dts: bcm2837: Define CPU thermal coefficients
arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
arm64: dts: Add I2C DT nodes for Stingray SoC
arm64: dts: Add GPIO DT nodes for Stingray SOC
arm64: dts: Add pinctrl DT nodes for Stingray SOC
arm64: dts: Add NAND DT nodes for Stingray SOC
arm64: dts: Add clock DT nodes for Stingray SOC
arm64: dts: Initial DTS files for Broadcom Stingray SOC
dt-bindings: clk: Extend binding doc for Stingray SOC
dt-bindings: bcm: Add Broadcom Stingray bindings document
ARM: dts: bcm283x: switch from &sdhci to &sdhost
arm64: dts: bcm2837: add &sdhci and &sdhost
ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM-based Device Tree changes for 4.13.
Note that Baruch's changes are fixes that are currently included in v4.12-rc2,
but they are also included here in order to keep this tag based off v4.12-rc1.
Please pull the following:
- Rafal adds CPU and thermal zones to the Northstar (BCM5301X) Device Tree and he
also adds the MDIO controller nodes for later use by USB PHYs
- Eric adds support for the V3D engine and Ethernet switch on the Cygnus
platforms, he also adds a set of Device Tree sources and include files for the
Raspberry Pi 3 (BCM2837) to be used with the ARM/Linux kernel,
- Jon adds CPU and thermal zones to the Northstar Plus Device Tree files
- Stefan updates the Raspberry Pi DTS files with thermal trip points and zones,
adds support for the USB OTG on the Raspberry Pi Zero which includes the
proper dwc2 configuration, a generic USB PHY and finally the enabling of the
OTG controller by including the proper DTS include file
- Gerd switches the Raspberry Pi DTS files to use the SDHOST controller (faster
than the SDHCI)
* tag 'arm-soc/for-4.13/devicetree' of http://github.com/Broadcom/stblinux:
ARM: dts: bcm2835-rpi-zero: Enable OTG mode
ARM: dts: bcm283x: Add generic USB PHY
ARM: dts: bcm283x: Add dtsi for OTG mode
ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY
ARM: dts: NSP: Add Thermal Support
ARM: dts: Cygnus: Add BCM11360's V3D device
ARM: dts: BCM5301X: Specify MDIO bus in the DT
ARM: dts: BCM5301X: Add CPU thermal sensor and zone
ARM: dts: bcm283x: switch from &sdhci to &sdhost
ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM-based SoCs (non Device Tree) changes:
- Jon updates the Kconfig entry for Northstar Plus to have THERMAL and THERMAL_OF
selected in order to get the NS/NSP thermal driver dependencies to be satistfied
* tag 'arm-soc/for-4.13/soc' of http://github.com/Broadcom/stblinux:
ARM: BCM: Enable thermal support for NSP SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
UniPhier ARM64 SoC DT updates for v4.13
- specify timing delay properties of eMMC
- fix W=1 build warnings
- increase memory reserve size
- use SPDX License Identifier
- add new board support (LD11/LD20 global)
* tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: add support for LD20 Global board
arm64: dts: uniphier: add support for LD11 Global board
arm64: dts: uniphier: use SPDX-License-Identifier
arm64: dts: uniphier: reserve more memory for LD11/LD20
arm64: dts: uniphier: fix simple-bus unit address format error
arm64: dts: uniphier: Use - instead of @ for DT OPP entries
arm64: dts: uniphier: add cdns, phy-dll-delay-sdclk(-hsmmc) for eMMC
arm64: dts: uniphier: add input-delay properties to Cadence eMMC node
Signed-off-by: Olof Johansson <olof@lixom.net>
UniPhier ARM SoC DT updates for v4.13
- fix W=1 build warnings
- use SPDX License Identifier
- add generic compatible string for I2C EEPROM
* tag 'uniphier-dt-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
ARM: dts: uniphier: Add generic compatible string for I2C EEPROM
ARM: dts: uniphier: use SPDX-License-Identifier
ARM: dts: uniphier: fix simple-bus unit address format error
ARM: dts: uniphier: Use - instead of @ for DT OPP entries
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch introduces the MACH_STM32F469 to make possible to only select
STM32F469 pinctrl driver
By default, all the MACH_STM32Fxxx flags will be set with STM32 defconfig.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
When nvme_kill_queues() is run, queues may be in
quiesced state, so we forcibly unquiesce queues to avoid
blocking dispatch, and I/O hang can be avoided in
remove path.
Peviously we use blk_mq_start_stopped_hw_queues() as
counterpart of blk_mq_quiesce_queue(), now we have
introduced blk_mq_unquiesce_queue(), so use it explicitly.
Cc: linux-nvme@lists.infradead.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- enhance scpsys to support mt6797
- add mt6797 support to scpsys
- fix error path in pmic-wrapper
- fix possible NULL pointer dereference in pmic-wrapper
* tag 'v4.12-next-soc' of https://github.com/mbgg/linux-mediatek:
soc: mediatek: PMIC wrap: Fix possible NULL derefrence.
soc: mediatek: PMIC wrap: Fix error handling
soc: mediatek: add MT6797 scpsys support
soc: mediatek: add vdec item for scpsys
soc: mediatek: avoid using fixed spm power status defines
Signed-off-by: Olof Johansson <olof@lixom.net>
Add device tree nodes for
mt8173:
- split USB SuperSpeed port in HighSpeed and SuperSpeed ports.
- move USB phy clocks up in hierarchy to met new bindings description
- move MDP nodes up in hierarchy to met new bindings description
mt6797:
- add basic SoC support
- add clock driver
- add power domain
dt-bindings:
- clean-up i2c binding description
- add binding for mt2701 i2c node
- add fallback compatible to scpsys binding description
- add bindings description for mt7622 and mt6796
* tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek:
dt-bindings: mediatek: add bindings for MediaTek MT7622 SoC
arm64: dts: mt8173: Fix mdp device tree
dt-bindings: i2c: Add Mediatek MT2701 i2c binding
dt-bindings: i2c-mtk: Add mt7623 binding
dt-bindings: i2c-mtk: Delete bindings
dt-bindings: i2c-mt6577: Rename file to reflect bindings
dt-bindings: mtk-sysirq: Correct bindings for supported SoCs
arm64: dts: mediatek: add clk and scp nodes for MT6797
dt-bindings: mediatek: add MT6797 power dt-bindings
arm64: dts: mediatek: add mt6797 support
dt-bindings: mediatek: Add bindings for mediatek MT6797 Platform
arm64: dts: mt8173: move clock from phy node into port nodes
arm64: dts: mt8173: split usb SuperSpeed port into two ports
Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: dts: Keystone K2G ICE EVM support for v4.13
* tag 'keystone_dts_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone: Add minimum support for K2G ICE evm
ARM: keystone: Create new binding for K2G ICE evm
ARM: dts: k2g-evm: Add unit address to memory node
ARM: dts: keystone-k2g: Remove skeleton.dtsi
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung mach/soc update for v4.13:
1. Fix possible circular Kconfig dependency on S3C64xx.
* tag 'samsung-soc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c64xx: Do not select ARM_AMBA from S3C64XX_PL080
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung DeviceTree ARM64 update for v4.13:
1. Remove unneeded TE interrupt gpio property.
* tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Remove the te-gpios property in the TM2 boards
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung DeviceTree update for v4.13:
1. Add HDMI CEC to Exynos5 SoCs.
2. Minor cleanups and readability improvements.
* tag 'samsung-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Use human-friendly symbols for GIC interrupt properties
ARM: dts: exynos: Use human-friendly symbols for interrupt flags in board sources
ARM: dts: exynos: Add HDMI CEC device to Exynos5 SoC family
ARM: dts: exynos: Remove MFC reserved buffers
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung defconfig ARM update for v4.13:
1. Enable Exynos PRNG along with user-space crypto API.
* tag 'samsung-defconfig-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Enable Exynos RNG and user-space crypto API
ARM: exynos_defconfig: Enable Exynos RNG and user-space crypto API
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for the RV1108 and its debug uart
* tag 'v4.13-rockchip-soc32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: enable support for RV1108 SoC
ARM: debug: add low level debug uart for rv1108
Signed-off-by: Olof Johansson <olof@lixom.net>
Support for the new rk3399 firefly board; extending the pcie ranges to
make usage of pci switches possible; some more qos and pinctrl nodes on
rk3399; updates for the rk3399 cpu operating points including separate
opps for the higher rates OP1 variant of the chip and mmc-nodes for
the rk3328.
* tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: update common rk3399 operating points
arm64: dts: rockchip: introduce rk3399-op1 operating points
arm64: dts: rockchip: enable usb3 controllers on rk3399-firefly
arm64: dts: rockchip: add ethernet0 alias on rk3399
arm64: dts: rockchip: bring rk3399-firefly power-tree in line
arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs
arm64: dts: rockchip: extent IORESOURCE_MEM_64 of PCIe for rk3399
arm64: dts: rockchip: extent bus-ranges of PCIe for rk3399
arm64: dts: rockchip: add pinctrl settings for some rk3399 peripherals
arm64: dts: rockchip: add some missing qos nodes on rk3399
arm64: dts: rockchip: add support for firefly-rk3399 board
dt-bindings: add firefly-rk3399 board support
Signed-off-by: Olof Johansson <olof@lixom.net>
A bunch of changes including mali gpu nodes for rk3288 boards
following (and including) the new Mali Midgard binding; a lot of
improvements for the rk3228/rk3229 socs (tsadc, operating points,
usb, clock-rates, pinctrl, watchdog); finalizing the rk1108->rv1108
rename and adc buttons for the rk3288 firefly boards.
* tag 'v4.13-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable usb for rk3229 evb board
ARM: dts: rockchip: add usb nodes on rk322x
ARM: dts: rockchip: add adc button for Firefly
ARM: dts: rockchip: enable ARM Mali GPU on rk3288-veyron
ARM: dts: rockchip: enable ARM Mali GPU on rk3288-firefly
ARM: dts: rockchip: enable ARM Mali GPU on rk3288-rock2-som
ARM: dts: rockchip: add ARM Mali GPU node for rk3288
dt-bindings: gpu: add bindings for the ARM Mali Midgard GPU
ARM: dts: rockchip: set a sane frequence for tsadc on rk322x
ARM: dts: rockchip: add operating-points-v2 for cpu on rk322x
ARM: dts: rockchip: set default rates for core clocks on rk322x
ARM: dts: rockchip: add second uart2 pinctrl on rk322x
ARM: dts: rockchip: correct rk322x uart2 pinctrl
ARM: dts: rockchip: add watchdog device node on rk322x
clk: rockchip: add clock-ids for more rk3228 clocks
clk: rockchip: add ids for camera on rk3399
ARM: dts: rockchip: fix rk322x i2s1 pinctrl error
ARM: dts: rockchip: rename RK1108-evb to RV1108-evb
ARM: dts: rockchip: rename core dtsi from RK1108 to RV1108
ARM: dts: rockchip: Setup usb vbus-supply on rk3288-rock2
Signed-off-by: Olof Johansson <olof@lixom.net>
Re-sync of davinci_all_defconfig with savedefconfig and enable
CPPI 4.1 DMA for MUSB, some commonly used USB devices, and
Lego Mindstorms EV3 battery driver.
* tag 'davinci-for-v4.13/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable CPPI 4.1 USB OTG DMA
ARM: davinci_all_defconfig: enable USB audio/video device support
ARM: davinci_all_defconfig: cleanup with savedefconfig
ARM: davinci_all_defconfig: enable LEGO MINDSTORMS EV3 battery module
Signed-off-by: Olof Johansson <olof@lixom.net>
