Some recent patches caused churn around this area, and checkpatch
noticed the existing issues.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
This fixes following warning:
include/linux/kern_levels.h:4:18: warning: format '%X' expects argument of type 'unsigned int', but argument 2 has type 'size_t {aka long unsigned int}' [-Wformat=]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Jakub Kicinski says:
====================
xdp: offload mode
While we discuss the representors.. :)
This set adds XDP flag for forcing offload and a attachment mode
for reporting to user space that program has been offloaded. The
nfp driver is modified to make use of the new flags, but also to
adhere to the DRV_MODE flag which should disable the HW offload.
The intended driver behaviour is:
DRV mode offload
no flags yes attempted
DRV_MODE yes no
HW_MODE no yes
Where 'yes' means required, and error will be returned if setup fails.
'Attempted' means the offload will only happen automatically if HW is
capable and offloading the program will cause no change in system
behaviour (e.g. maps don't have to bound).
Thanks to loading the program both to the driver and HW by default we
can fallback to the driver mode without disruption in case user replaces
the program with one which cannot be offloaded later.
Note that the NFP driver currently claims XDP offload support but
lacks most basic features like direct packet access.
Only change compared to the RFC is fixing the double bpf_prog_put()
which Daniel has spotted (patch 5).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the XDP_ATTACHED_* values to include offloaded mode.
Let drivers report whether program is installed in the driver
or the HW by changing the prog_attached field from bool to
u8 (type of the netlink attribute).
Exploit the fact that the value of XDP_ATTACHED_DRV is 1,
therefore since all drivers currently assign the mode with
double negation:
mode = !!xdp_prog;
no drivers have to be modified.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Respect the XDP_FLAGS_HW_MODE. When it's set install the program
on the NIC and skip enabling XDP in the driver.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The xdp_prog member of the adapter's data path structure is used
for XDP in driver mode. In case a XDP program is loaded with in
HW-only mode, we need to store it somewhere else. Add a new XDP
prog pointer in the main structure and use that when we need to
know whether any XDP program is loaded, not only a driver mode
one. Only release our reference on adapter free instead of
immediately after netdev unregister to allow offload to be disabled
first.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DRV_MODE means that user space wants the program to be run in
the driver. Do not try to offload. Only offload if no mode
flags have been specified.
Remember what the mode is when the program is installed and refuse
new setup requests if there is already a program loaded in a
different mode. This should leave it open for us to implement
simultaneous loading of two programs - one in the drv path and
another to the NIC later.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation of XDP offload flags move the driver setup into
a function. Otherwise the number of conditions in one function
would make it slightly hard to follow. The offload handler may
now be called with NULL prog, even if no offload is currently
active, but that's fine, offload code can handle that.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an installation-time flag for requesting that the program
be installed only if it can be offloaded to HW.
Internally new command for ndo_xdp is added, this way we avoid
putting checks into drivers since they all return -EINVAL on
an unknown command.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass XDP flags to the xdp ndo. This will allow drivers to look
at the mode flags and make decisions about offload.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
le16_to_cpu() accepts argument of type __le16 and cpu_to_le16()
returns an argument of type __le16. This patch fixes:
(a) the type of the variable that end's up getting return from
cpu_to_le16().
(b) the member types of struct hfa384x_host_scan_request_data,
struct hfa384x_bytestr32 and struct hfa384x_hscan_result_sub.
The following type mismatch warnings reported by sparse
have been fixed:
warning: incorrect type in assignment (different base types)
warning: cast to restricted __le16
Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecassary casts in the argument to kfree.
Found using Coccinelle. The semantic patch used to find this is as
follows:
//<smpl>
@@
type T;
expression *f;
@@
- kfree((T *)(f));
+ kfree(f);
//</smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch assigns (true/false) to boolean EDCCA_State instead of (1/0).
And, there is no need of comparing EDCCA_State explicitly with constant
1.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The previous patch which updated screen resolution was tested under
wrong environment. sm750 driver does not support 24bpp. It only
supports 8bpp, 16bpp and 32bpp.
Lets update the default screen resolution to use 32bpp for a better
screen performance.
Fixes: ac66925108 ("staging: sm750fb: change default screen resolution")
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove white space after tabstop on closing bracket as suggested by
checkpatch.pl. Additional white space removed for page consistency.
Signed-off-by: Matthew Reed <4d5452@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Our customer encountered stuck NFS writes for blocks starting at specific
offsets w.r.t. page boundary caused by networking stack sending packets via
UFO enabled device with wrong checksum. The problem can be reproduced by
composing a long UDP datagram from multiple parts using MSG_MORE flag:
sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 3000, 0, ...);
Assume this packet is to be routed via a device with MTU 1500 and
NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(),
this condition is tested (among others) to decide whether to call
ip_ufo_append_data():
((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb))
At the moment, we already have skb with 1028 bytes of data which is not
marked for GSO so that the test is false (fragheaderlen is usually 20).
Thus we append second 1000 bytes to this skb without invoking UFO. Third
sendto(), however, has sufficient length to trigger the UFO path so that we
end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb()
uses udp_csum() to calculate the checksum but that assumes all fragments
have correct checksum in skb->csum which is not true for UFO fragments.
When checking against MTU, we need to add skb->len to length of new segment
if we already have a partially filled skb and fragheaderlen only if there
isn't one.
In the IPv6 case, skb can only be null if this is the first segment so that
we have to use headersize (length of the first IPv6 header) rather than
fragheaderlen (length of IPv6 header of further fragments) for skb == NULL.
Fixes: e89e9cf539 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Fixes: e4c5e13aa4 ("ipv6: Should use consistent conditional judgement for
ip6 fragment between __ip6_append_data and ip6_finish_output")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a kernel is built without CONFIG_ARM64_MODULE_PLTS, we don't
generate the expected branch instruction in ftrace_make_nop(). This
means we pass zero (rather than a valid branch) to ftrace_modify_code()
as the expected instruction to validate. This causes us to return
-EINVAL to the core ftrace code for a valid case, resulting in a splat
at boot time.
This was an unintended effect of commit:
687644209a ("arm64: ftrace: fix building without CONFIG_MODULES")
... which incorrectly moved the generation of the branch instruction
into the ifdef for CONFIG_ARM64_MODULE_PLTS.
This patch fixes the issue by moving the ifdef inside of the relevant
if-else case, and always checking that the branch is in range,
regardless of CONFIG_ARM64_MODULE_PLTS. This ensures that we generate
the expected branch instruction, and also improves our sanity checks.
For consistency, both ftrace_make_nop() and ftrace_make_call() are
updated with this pattern.
Fixes: 687644209a ("arm64: ftrace: fix building without CONFIG_MODULES")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch defines an extra_context signal frame record that can be
used to describe an expanded signal frame, and modifies the context
block allocator and signal frame setup and parsing code to create,
populate, parse and decode this block as necessary.
To avoid abuse by userspace, parse_user_sigframe() attempts to
ensure that:
* no more than one extra_context is accepted;
* the extra context data is a sensible size, and properly placed
and aligned.
The extra_context data is required to start at the first 16-byte
aligned address immediately after the dummy terminator record
following extra_context in rt_sigframe.__reserved[] (as ensured
during signal delivery). This serves as a sanity-check that the
signal frame has not been moved or copied without taking the extra
data into account.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[will: add __force annotation when casting extra_datap to __user pointer]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cavium ThunderX2 SMMU doesn't support MSI and also doesn't have unique irq
lines for gerror, eventq and cmdq-sync.
New named irq "combined" is set as a errata workaround, which allows to
share the irq line by register single irq handler for all the interrupts.
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Geetha sowjanya <gakula@caviumnetworks.com>
[will: reworked irq equality checking and added SPI check]
Signed-off-by: Will Deacon <will.deacon@arm.com>
HiSilicon SMMUv3 on Hip06/Hip07 platforms doesn't support CMD_PREFETCH
command. The dt based support for this quirk is already present in the
driver(hisilicon,broken-prefetch-cmd). This adds ACPI support for the
quirk using the IORT smmu model number.
Signed-off-by: shameer <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: hanjun <guohanjun@huawei.com>
[will: rewrote patch]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cavium ThunderX2 SMMU implementation doesn't support page 1 register space
and PAGE0_REGS_ONLY option is enabled as an errata workaround.
This option when turned on, replaces all page 1 offsets used for
EVTQ_PROD/CONS, PRIQ_PROD/CONS register access with page 0 offsets.
SMMU resource size checks are now based on SMMU option PAGE0_REGS_ONLY,
since resource size can be either 64k/128k.
For this, arm_smmu_device_dt_probe/acpi_probe has been moved before
platform_get_resource call, so that SMMU options are set beforehand.
Signed-off-by: Linu Cherian <linu.cherian@cavium.com>
Signed-off-by: Geetha Sowjanya <geethasowjanya.akula@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cavium ThunderX2 implementation doesn't support second page in SMMU
register space. Hence, resource size is set as 64k for this model.
Signed-off-by: Linu Cherian <linu.cherian@cavium.com>
Signed-off-by: Geetha Sowjanya <geethasowjanya.akula@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When writing a new table entry, we must ensure that the contents of the
table is made visible to the SMMU page table walker before the updated
table entry itself.
This is currently achieved using wmb(), which expands to an expensive and
unnecessary DSB instruction. Ideally, we'd just use cmpxchg64_release when
writing the table entry, but this doesn't have memory ordering semantics
on !SMP systems.
Instead, use dma_wmb(), which emits DMB OSHST. Strictly speaking, this
does more than we require (since it targets the outer-shareable domain),
but it's likely to be significantly faster than the DSB approach.
Reported-by: Linu Cherian <linu.cherian@cavium.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The LPAE/ARMv8 page table format relies on the ability to read and write
64-bit page table entries in an atomic fashion. With the move to a lockless
implementation, we also need support for cmpxchg64 to resolve races when
installing table entries concurrently.
Unfortunately, not all architectures support cmpxchg64, so the code can
fail to compiler when building for these architectures using COMPILE_TEST.
Rather than disable COMPILE_TEST altogether, instead check that
GENERIC_ATOMIC64 is not selected, which is a reasonable indication that
the architecture has support for 64-bit cmpxchg.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
As for SMMUv2, take advantage of io-pgtable's newfound tolerance for
concurrency. Unfortunately in this case the command queue lock remains a
point of serialisation for the unmap path, but there may be a little
more we can do to ameliorate that in future.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
With the io-pgtable code now robust against (valid) races, we no longer
need to serialise all operations with a lock. This might make broken
callers who issue concurrent operations on overlapping addresses go even
more wrong than before, but hey, they already had little hope of useful
or deterministic results.
We do however still have to keep a lock around to serialise the ATS1*
translation ops, as parallel iova_to_phys() calls could lead to
unpredictable hardware behaviour otherwise.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Mirroring the LPAE implementation, rework the v7s code to be robust
against concurrent operations. The same two potential races exist, and
are solved in the same manner, with the fixed 2-level structure making
life ever so slightly simpler.
What complicates matters compared to LPAE, however, is large page
entries, since we can't update a block of 16 PTEs atomically, nor assume
available software bits to do clever things with. As most users are
never likely to do partial unmaps anyway (due to DMA API rules), it
doesn't seem unreasonable for this case to remain behind a serialising
lock; we just pull said lock down into the bowels of the implementation
so it's well out of the way of the normal call paths.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
For parallel I/O with multiple concurrent threads servicing the same
device (or devices, if several share a domain), serialising page table
updates becomes a massive bottleneck. On reflection, though, we don't
strictly need to do that - for valid IOMMU API usage, there are in fact
only two races that we need to guard against: multiple map requests for
different blocks within the same region, when the intermediate-level
table for that region does not yet exist; and multiple unmaps of
different parts of the same block entry. Both of those are fairly easily
solved by using a cmpxchg to install the new table, such that if we then
find that someone else's table got there first, we can simply free ours
and continue.
Make the requisite changes such that we can withstand being called
without the caller maintaining a lock. In theory, this opens up a few
corners in which wildly misbehaving callers making nonsensical
overlapping requests might lead to crashes instead of just unpredictable
results, but correct code really does not deserve to pay a significant
performance cost for the sake of masking bugs in theoretical broken code.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Once we remove the serialising spinlock, a potential race opens up for
non-coherent IOMMUs whereby a caller of .map() can be sure that cache
maintenance has been performed on their new PTE, but will have no
guarantee that such maintenance for table entries above it has actually
completed (e.g. if another CPU took an interrupt immediately after
writing the table entry, but before initiating the DMA sync).
Handling this race safely will add some potentially non-trivial overhead
to installing a table entry, which we would much rather avoid on
coherent systems where it will be unnecessary, and where we are stirivng
to minimise latency by removing the locking in the first place.
To that end, let's introduce an explicit notion of cache-coherency to
io-pgtable, such that we will be able to avoid penalising IOMMUs which
know enough to know when they are coherent.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Whilst the short-descriptor format's split_blk_unmap implementation has
no need to be recursive, it followed the pattern of the LPAE version
anyway for the sake of consistency. With the latter now reworked for
both efficiency and future scalability improvements, tweak the former
similarly, not least to make it less obtuse.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The current split_blk_unmap implementation suffers from some inscrutable
pointer trickery for creating the tables to replace the block entry, but
more than that it also suffers from hideous inefficiency. For example,
the most pathological case of unmapping a level 3 page from a level 1
block will allocate 513 lower-level tables to remap the entire block at
page granularity, when only 2 are actually needed (the rest can be
covered by level 2 block entries).
Also, we would like to be able to relax the spinlock requirement in
future, for which the roll-back-and-try-again logic for race resolution
would be pretty hideous under the current paradigm.
Both issues can be resolved most neatly by turning things sideways:
instead of repeatedly recursing into __arm_lpae_map() map to build up an
entire new sub-table depth-first, we can directly replace the block
entry with a next-level table of block/page entries, then repeat by
unmapping at the next level if necessary. With a little refactoring of
some helper functions, the code ends up not much bigger than before, but
considerably easier to follow and to adapt in future.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Whilst we don't support the PXN bit at all, so should never encounter a
level 1 section or supersection PTE with it set, it would still be wise
to check both table type bits to resolve any theoretical ambiguity.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
iommu_device_register returns an error code and, although it currently
never fails, we should check its return value anyway.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
[will: adjusted to follow arm-smmu.c]
Signed-off-by: Will Deacon <will.deacon@arm.com>
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Revision C of IORT now allows us to identify ARM MMU-401 and the Cavium
ThunderX implementation. Wire them up so that we can probe these models
once firmware starts using the new codes in place of generic ones, and
so that the appropriate features and quirks get enabled when we do.
For the sake of backports and mitigating sychronisation problems with
the ACPICA headers, we'll carry a backup copy of the new definitions
locally for the short term to make life simpler.
CC: stable@vger.kernel.org # 4.10
Acked-by: Robert Richter <rrichter@cavium.com>
Tested-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
File size before:
text data bss dec hex filename
6146 56 9 6211 1843 drivers/iommu/io-pgtable-arm-v7s.o
File size After adding 'const':
text data bss dec hex filename
6170 24 9 6203 183b drivers/iommu/io-pgtable-arm-v7s.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Waiting for a CMD_SYNC to be processed involves waiting for the command
queue to drain, which can take an awful lot longer than waiting for a
single entry to become available. Consequently, the common timeout value
of 100us has been observed to be too short on some platforms when a
CMD_SYNC is issued into a queued full of TLBI commands.
This patch resolves the issue by using a different (1s) timeout when
waiting for the CMDQ to drain and using a simple back-off mechanism
when polling the cons pointer in the absence of WFE support.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
[will: rewrote commit message and cosmetic changes]
Signed-off-by: Will Deacon <will.deacon@arm.com>
The header field in struct pd_message is declared as an __le16 type. The
data in the message is supposed to be little endian. This means we don't
have to go and shift the individual bytes into position when we're
filling the buffer, we can just copy the contents right away. As an
added benefit we don't get fishy results on big endian systems anymore.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dprc.h is only used in the mc bus driver so move it together with the
sources thus making it private.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mc-cmd.h contains some low level functions used to encode and decode
commands to the MC. They are used by the drivers so move them to the
public headers and get rid of the mc-cmd.h header.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mc-sys.h contains the API to send commands to the MC and is used
by drivers. Move it to the public headers and get rid of the mc-sys.h
header.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Few files using byte order macros but did not explicitly
included the required kernel header, so add it.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dpmng.h & dpmng.c files expose an API of just one function which is only
used by the bus driver. Move that single API in the bus source as static
and remove the two files.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the mc-bus.h contents is only used privately in the bus driver so
move everything to the private header and get rid of the mc-bus.h
header file.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define dev_is_fsl_mc() and the bus type definition (fsl_mc_bus_type)
are used externally so move them to the public header.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fsl_mc_msi_create_irq_domain() will is used from the irqchip glue code
so it needs to be in the public headers.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
They are never used outside the source they are implemented in and very
likely never will, so it's safe to make them static.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function fsl_mc_bus_exists() has a prototype but is never
implemented so delete it from the header file.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
