xuhuicong
6d3fbffa37
rk616 hdmi: remove some hdmi global variable and change operate reg func name
2013-07-03 23:34:44 +08:00
xuhuicong
d9f1316d4f
rk616 hdmi: change irq flag as IRQF_TRIGGER_LOW to modify some time lost interrupt
2013-07-03 23:29:52 +08:00
hwg
ef49919498
mt6622: support wake up host
2013-07-03 17:08:35 +08:00
ddl
b9ec311ce0
camera: cif v0.3.7:support rk3028 , read 3028 chip id by efuse for check cif controller is normal or not
2013-07-03 15:04:08 +08:00
xbw
83e70aef90
rk2928:
...
eliminate the build error using rk2928_tb_defconfig/rk2928_sdk_defconfig.
as the following:
UPD include/generated/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
drivers/built-in.o: In function rk29_sdmmc_gpio_open'
make: *** [.tmp_vmlinux1] Error 1
2013-07-03 13:15:33 +08:00
ddl
2fd8a03bf7
camera: ov5640 v0.1.3, rk_cam_io:v0.1.1
2013-07-03 11:00:40 +08:00
黄涛
c83124f13a
rk30: cpufreq: support sys_state
2013-07-03 10:11:09 +08:00
陈金泉
95ebffb4bf
rk hdmi i2s: add I2S judgement
2013-07-02 16:47:48 +08:00
陈金泉
590a98edfe
rk616 codec: delete proc, correct get parameter
2013-07-02 11:47:07 +08:00
陈金泉
ce1982dfad
rk616 codec:get parameter with new method
2013-07-01 17:35:36 +08:00
陈金泉
1dbd249045
add es8323 codec for pcm modem
2013-07-01 17:31:52 +08:00
wdc
d5db020589
reverts commit for error commit
...
Revert "ad"
This reverts commit cfb56f5fce
2013-07-01 16:19:46 +08:00
wdc
bdf9f95e32
wifi: rtl8723as add sdio_reset
2013-07-01 16:03:39 +08:00
wdc
e4296d02c6
Merge branch 'develop-3.0' of ssh://10.10.10.29/rk/kernel into develop-3.0
2013-07-01 15:54:31 +08:00
邱建斌
58c8419656
rt5616 codec ： fix play tail problem solving
2013-07-01 14:15:05 +08:00
chenxing
f6f1494543
rk3188: do nothing with usb clks when system deep suspend
2013-06-29 17:07:08 +08:00
chenxing
fc5c15eaa3
rk3188: uboot: open pd_lcdc0/1 for uboot display
2013-06-29 17:01:36 +08:00
yxj
e84b364c58
rk screen:fix Makefile,only update lcd.h when the source file is changed
2013-06-29 14:11:49 +08:00
yxj
9b1f2561a1
rk fb: set scaler after lcdc timing modification in one lcdc dual display mode
...
this is to mach jettb vif sync requirement
2013-06-29 11:57:07 +08:00
yxj
2554c892a0
rk hdmi:fix a macro err
2013-06-29 11:55:21 +08:00
chenxing
e4deae2caa
rk3066B: rk3028: get version interface export
2013-06-29 11:22:56 +08:00
hjc
01df44d607
rk3188 lcdc:support uboot display
2013-06-29 10:06:16 +08:00
xxh
d94cd77862
support Huawei HiLink dongle vid pid 0x12d1 0x1f01
2013-06-28 16:59:52 +08:00
chenxing
ddec1eb1ee
rk3066B: suport hdmi 576p(dclk_lcdc freediv when need 27 MHz)
2013-06-28 15:17:52 +08:00
yxj
1bf73ddc9e
mfd:rk616:core:fix rk616_i2c_write_bits
2013-06-28 14:57:10 +08:00
xuhuicong
e2d44970fa
hdmi: rk616:
...
set hdmi polarity invent and time sequence when switch fb resolution
to modify display shake
2013-06-28 14:54:55 +08:00
yxj
a838f98040
rk2928 lcdc:fix compile err
2013-06-28 12:19:01 +08:00
yxj
304e07b32c
mfd:rk616: vif:add sync mode
...
core:add write_dev_bits interface
2013-06-28 12:12:49 +08:00
yxj
fa87607483
fix rk2928 dual display mode
2013-06-28 12:12:49 +08:00
ddl
d4615ab308
camera: generic_sensor v0.1.9
2013-06-28 11:16:15 +08:00
kfx
9ca853a25d
i2c: 'fixed bug: set scl clk' and 'warning if scl is hold by slave'
2013-06-28 10:38:35 +08:00
hwg
392faa8e4b
vmac: reset phy to solve sometimes phy do not work when boot
2013-06-27 19:16:53 +08:00
邱建斌
30e86017bc
rk610 codec: add pa enable delay time config
...
Some amplifiers enable a longer time.
config after pa_enable_io delay pa_enable_time(ms)
default = 0,preferably not more than 1000ms
2013-06-27 16:34:36 +08:00
kfx
d2eba14d05
rk3188m: update defconfig
2013-06-26 14:58:05 +08:00
yzq
cfbf2e780f
RK610: fix dual screen sleep resume err
2013-06-26 13:21:54 +08:00
yzq
9517f98238
rk610 : support dual lcdc display
2013-06-25 15:32:41 +08:00
yxj
0ea96bd9dc
board jettaplus:update defconfig,set ddr to 456MHZ in dual display mode
2013-06-25 10:04:19 +08:00
yxj
d78f2d3e8f
mfd:rk616:support power down in suspend,add config to enable/disable debug message
2013-06-25 10:04:18 +08:00
chenxing
9fb44f94a4
rk3188: fix i2s set cnt init error
2013-06-25 09:57:59 +08:00
chenxing
1a46176b95
rk3188: use mdelay instead of msleep in clock_data.c because of lock
2013-06-24 17:21:26 +08:00
chenxing
fb50e9e252
rk3188: fix i2s frac set rate do not effect
2013-06-24 14:26:39 +08:00
chenxing
7e300aee71
rk3188: uboot display support; use support_uboot_display to get status
2013-06-24 11:32:32 +08:00
xuhuicong
4427d5d4a8
hdmi: cat66121: set i2s freq 44.1k to fix sound too small on some tv
2013-06-22 16:06:34 +08:00
xuhuicong
3a9e58f89a
hdmi: rk616
...
release work queue and disable irq in rk616_hdmi_shutdown
to avid panic when shutdown
2013-06-22 15:41:46 +08:00
xuhuicong
0b6950bb5d
battery: cw2015: add wakeup system when capacity is 0 and Resolve some bug
2013-06-22 13:55:54 +08:00
黄涛
221936fdef
rk3188: cpufreq version 2.1
...
fix over thermal throttle when some cpu is offline
more throttle when 4 cpus run on rk3188
support rk3188m
2013-06-21 18:07:23 +08:00
黄涛
23a94796e9
rk3188m: add SOC_RK3188M config
2013-06-21 18:07:23 +08:00
chenxing
784a31ab46
rk292x: support set_rate_even div = 1
2013-06-21 17:14:52 +08:00
chenxing
98db31bfb5
rk3066: support set_rate_even div = 1
2013-06-21 17:14:52 +08:00
chenxing
33eb569035
rk3066B: support set_rate_even div = 1
2013-06-21 17:14:52 +08:00
