[ Upstream commit c2ed2403f1 ]
There was a fail when trying to add the interface to bonding
right after changing the MTU on the interface. It was caused
by bonding interface unable to open the interface due to
interface being in __RESETTING state because of MTU change.
Add new reset_waitqueue to indicate that reset has finished.
Add waiting for reset to finish in callbacks which trigger hw reset:
iavf_set_priv_flags(), iavf_change_mtu() and iavf_set_ringparam().
We use a 5000ms timeout period because on Hyper-V based systems,
this operation takes around 3000-4000ms. In normal circumstances,
it doesn't take more than 500ms to complete.
Add a function iavf_wait_for_reset() to reuse waiting for reset code and
use it also in iavf_set_channels(), which already waits for reset.
We don't use error handling in iavf_set_channels() as this could
cause the device to be in incorrect state if the reset was scheduled
but hit timeout or the waitng function was interrupted by a signal.
Fixes: 4e5e6b5d9d ("iavf: Fix return of set the new channel count")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Co-developed-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dcbdf2928 ]
When the user disables rxvlan offloading and then changes the number of
channels, all VLAN ports are unable to receive traffic.
Changing the number of channels triggers a VFR reset. During re-init, when
VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is received, we do:
1 - set the IAVF_FLAG_SETUP_NETDEV_FEATURES flag
2 - call
iavf_set_vlan_offload_features(adapter, 0, netdev->features);
The second step sends to the PF the __default__ features, in this case
aq_required |= IAVF_FLAG_AQ_ENABLE_CTAG_VLAN_STRIPPING
While the first step forces the watchdog task to call
netdev_update_features() -> iavf_set_features() ->
iavf_set_vlan_offload_features(adapter, netdev->features, features).
Since the user disabled the "rxvlan", this sets:
aq_required |= IAVF_FLAG_AQ_DISABLE_CTAG_VLAN_STRIPPING
When we start processing the AQ commands, both flags are enabled. Since we
process DISABLE_XTAG first then ENABLE_XTAG, this results in the PF
enabling the rxvlan offload. This breaks all communications on the VLAN
net devices.
Fix by removing the call to iavf_set_vlan_offload_features() (second
step). Calling netdev_update_features() from watchdog task is enough for
both init and reset paths.
Fixes: 7598f4b40b ("iavf: Move netdev_update_features() into watchdog task")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: c2ed2403f1 ("iavf: Wait for reset in callbacks which trigger it")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7598f4b40b ]
Remove netdev_update_features() from iavf_adminq_task(), as it can cause
deadlocks due to needing rtnl_lock. Instead use the
IAVF_FLAG_SETUP_NETDEV_FEATURES flag to indicate that netdev features need
to be updated in the watchdog task. iavf_set_vlan_offload_features()
and iavf_set_queue_vlan_tag_loc() can be called directly from
iavf_virtchnl_completion().
Suggested-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: c2ed2403f1 ("iavf: Wait for reset in callbacks which trigger it")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a77ed5c5b7 ]
If the system tries to close the netdev while iavf_reset_task() is
running, __LINK_STATE_START will be cleared and netif_running() will
return false in iavf_reinit_interrupt_scheme(). This will result in
iavf_free_traffic_irqs() not being called and a leak as follows:
[7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0'
[7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0
is shown when pci_disable_msix() is later called. Fix by using the
internal adapter state. The traffic IRQs will always exist if
state == __IAVF_RUNNING.
Fixes: 5b36e8d04b ("i40evf: Enable VF to request an alternate queue allocation")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bdf79d686 ]
The KSZ8795 driver code was modified to use on KSZ8863/73, which has
different register definitions. Some of the new KSZ8795 register
information are wrong compared to previous code.
KSZ8795 also behaves differently in that the STATIC_MAC_TABLE_USE_FID
and STATIC_MAC_TABLE_FID bits are off by 1 when doing MAC table reading
than writing. To compensate that a special code was added to shift the
register value by 1 before applying those bits. This is wrong when the
code is running on KSZ8863, so this special code is only executed when
KSZ8795 is detected.
Fixes: 4b20a07e10 ("net: dsa: microchip: ksz8795: add support for ksz88xx chips")
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 559901b468 ]
Prepare for the next patch by ensuring that ksz8_r_sta_mac_table() does
not use error codes for empty entries. This change will enable better
handling of read/write errors in the upcoming patch.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 4bdf79d686 ("net: dsa: microchip: correct KSZ8795 static MAC table access")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5751cdd7d ]
As ksz8_r_sta_mac_table() is only used within ksz8795.c, there is no need
to export it. Make the function static for better encapsulation.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 4bdf79d686 ("net: dsa: microchip: correct KSZ8795 static MAC table access")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6636ff69e ]
Move static MAC table operations to separate functions in order to reuse
the code for add/del_fdb. This is needed to address kernel warnings
caused by the lack of fdb add function support in the current driver.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 4bdf79d686 ("net: dsa: microchip: correct KSZ8795 static MAC table access")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26a2219492 ]
If cls_bpf_offload errors out, we must also undo tcf_bind_filter that
was done before the error.
Fix that by calling tcf_unbind_filter in errout_parms.
Fixes: eadb41489f ("net: cls_bpf: add support for marking filters as hardware-only")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8d3d78c19 ]
In the case of an update, when TCA_U32_LINK is set, u32_set_parms will
decrement the refcount of the ht_down (struct tc_u_hnode) pointer
present in the older u32 filter which we are replacing. However, if
u32_replace_hw_knode errors out, the update command fails and that
ht_down pointer continues decremented. To fix that, when
u32_replace_hw_knode fails, check if ht_down's refcount was decremented
and undo the decrement.
Fixes: d34e3e1813 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3d0e04894 ]
In case an error occurred after mall_set_parms executed successfully, we
must undo the tcf_bind_filter call it issues.
Fix that by calling tcf_unbind_filter in err_replace_hw_filter label.
Fixes: ec2507d2a3 ("net/sched: cls_matchall: Fix error path")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 469e2f28c2 ]
This doesn't check how many bytes the simple_write_to_buffer() writes to
the buffer. The only thing that we know is that the first byte is
initialized and the last byte of the buffer is set to NUL. However
the middle bytes could be uninitialized.
There is no need to use simple_write_to_buffer(). This code does not
support partial writes but instead passes "pos = 0" as the starting
offset regardless of what the user passed as "*ppos". Just use the
copy_from_user() function and initialize the whole buffer.
Fixes: 671e0b9005 ("ASoC: SOF: Clone the trace code to ipc3-dtrace as fw_tracing implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/74148292-ce4d-4e01-a1a7-921e6767da14@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69cba9d3c1 ]
When the number of responses with status of STATUS_IO_TIMEOUT
exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect
the connection. But we do not return the mid, or the credits
returned for the mid, or reduce the number of in-flight requests.
This bug could result in the server->in_flight count to go bad,
and also cause a leak in the mids.
This change moves the check to a few lines below where the
response is decrypted, even of the response is read from the
transform header. This way, the code for returning the mids
can be reused.
Also, the cifs_reconnect was reconnecting just the transport
connection before. In case of multi-channel, this may not be
what we want to do after several timeouts. Changed that to
reconnect the session and the tree too.
Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name
MAX_STATUS_IO_TIMEOUT.
Fixes: 8e670f77c4 ("Handle STATUS_IO_TIMEOUT gracefully")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d6d537dc5 ]
Move the call to of_get_ethdev_address to mtk_add_mac which is part of
the probe function and can hence itself return -EPROBE_DEFER should
of_get_ethdev_address return -EPROBE_DEFER. This allows us to entirely
get rid of the mtk_init function.
The problem of of_get_ethdev_address returning -EPROBE_DEFER surfaced
in situations in which the NVMEM provider holding the MAC address has
not yet be loaded at the time mtk_eth_soc is initially probed. In this
case probing of mtk_eth_soc should be deferred instead of falling back
to use a random MAC address, so once the NVMEM provider becomes
available probing can be repeated.
Fixes: 656e705243 ("net-next: mediatek: add support for MT7623 ethernet")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56a16035bb ]
When we create an L2 loop on a bridge in netns, we will see packets storm
even if STP is enabled.
# unshare -n
# ip link add br0 type bridge
# ip link add veth0 type veth peer name veth1
# ip link set veth0 master br0 up
# ip link set veth1 master br0 up
# ip link set br0 type bridge stp_state 1
# ip link set br0 up
# sleep 30
# ip -s link show br0
2: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether b6:61:98:1c:1c:b5 brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
956553768 12861249 0 0 0 12861249 <-. Keep
TX: bytes packets errors dropped carrier collsns | increasing
1027834 11951 0 0 0 0 <-' rapidly
This is because llc_rcv() drops all packets in non-root netns and BPDU
is dropped.
Let's add extack warning when enabling STP in netns.
# unshare -n
# ip link add br0 type bridge
# ip link set br0 type bridge stp_state 1
Warning: bridge: STP does not work in non-root netns.
Note this commit will be reverted later when we namespacify the whole LLC
infra.
Fixes: e730c15519 ("[NET]: Make packet reception network namespace safe")
Suggested-by: Harry Coin <hcoin@quietfountain.com>
Link: https://lore.kernel.org/netdev/0f531295-e289-022d-5add-5ceffa0df9bc@quietfountain.com/
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b685f1a589 ]
CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the
field will be strictly contained within one word. However, this is not
guaranteed to be the case and it is possible for ALE field entries to span
across up to two words at the most.
Fix the methods to handle getting/setting fields spanning up to two words.
Fixes: db82173f23 ("netdev: driver: ethernet: add cpsw address lookup engine support")
Signed-off-by: Tanmay Patil <t-patil@ti.com>
[s-vadapalli@ti.com: rephrased commit message and added Fixes tag]
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95ce158b6c ]
I get sporadic timeouts from the driver when using the
MV88E6352. Reading the status again after the loop fixes the
problem: the operation is successful but goes undetected.
Some added prints show things like this:
[ 58.356209] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
for switch, addr 1b reg 0b, mask 8000, val 0000, data c000
[ 58.367487] mv88e6085 mdio_mux-0.1:00: Timeout waiting for
ATU op 4000, fid 0001
(...)
[ 61.826293] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
for switch, addr 1c reg 18, mask 8000, val 0000, data 9860
[ 61.837560] mv88e6085 mdio_mux-0.1:00: Timeout waiting
for PHY command 1860 to complete
The reason is probably not the commands: I think those are
mostly fine with the 50+50ms timeout, but the problem
appears when OpenWrt brings up several interfaces in
parallel on a system with 7 populated ports: if one of
them take more than 50 ms and waits one or more of the
others can get stuck on the mutex for the switch and then
this can easily multiply.
As we sleep and wait, the function loop needs a final
check after exiting the loop if we were successful.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Fixes: 35da1dfd94 ("net: dsa: mv88e6xxx: Improve performance of busy bit polling")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230712223405.861899-1-linus.walleij@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cc32a9bbf ]
Commit 6eb4bd92c1 ("kallsyms: strip LTO suffixes from static functions")
stripped all function/variable suffixes started with '.' regardless
of whether those suffixes are generated at LTO mode or not. In fact,
as far as I know, in LTO mode, when a static function/variable is
promoted to the global scope, '.llvm.<...>' suffix is added.
The existing mechanism breaks live patch for a LTO kernel even if
no <symbol>.llvm.<...> symbols are involved. For example, for the following
kernel symbols:
$ grep bpf_verifier_vlog /proc/kallsyms
ffffffff81549f60 t bpf_verifier_vlog
ffffffff8268b430 d bpf_verifier_vlog._entry
ffffffff8282a958 d bpf_verifier_vlog._entry_ptr
ffffffff82e12a1f d bpf_verifier_vlog.__already_done
'bpf_verifier_vlog' is a static function. '_entry', '_entry_ptr' and
'__already_done' are static variables used inside 'bpf_verifier_vlog',
so llvm promotes them to file-level static with prefix 'bpf_verifier_vlog.'.
Note that the func-level to file-level static function promotion also
happens without LTO.
Given a symbol name 'bpf_verifier_vlog', with LTO kernel, current mechanism will
return 4 symbols to live patch subsystem which current live patching
subsystem cannot handle it. With non-LTO kernel, only one symbol
is returned.
In [1], we have a lengthy discussion, the suggestion is to separate two
cases:
(1). new symbols with suffix which are generated regardless of whether
LTO is enabled or not, and
(2). new symbols with suffix generated only when LTO is enabled.
The cleanup_symbol_name() should only remove suffixes for case (2).
Case (1) should not be changed so it can work uniformly with or without LTO.
This patch removed LTO-only suffix '.llvm.<...>' so live patching and
tracing should work the same way for non-LTO kernel.
The cleanup_symbol_name() in scripts/kallsyms.c is also changed to have the same
filtering pattern so both kernel and kallsyms tool have the same
expectation on the order of symbols.
[1] https://lore.kernel.org/live-patching/20230615170048.2382735-1-song@kernel.org/T/#u
Fixes: 6eb4bd92c1 ("kallsyms: strip LTO suffixes from static functions")
Reported-by: Song Liu <song@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230628181926.4102448-1-yhs@fb.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 010a0aad39 ]
LLVM appends various suffixes for local functions and variables, suffixes
observed:
- foo.llvm.[0-9a-f]+
- foo.[0-9a-f]+
Therefore, when CONFIG_LTO_CLANG=y, kallsyms_lookup_name() needs to
truncate the suffix of the symbol name before comparing the local function
or variable name.
Old implementation code:
- if (strcmp(namebuf, name) == 0)
- return kallsyms_sym_address(i);
- if (cleanup_symbol_name(namebuf) && strcmp(namebuf, name) == 0)
- return kallsyms_sym_address(i);
The preceding process is traversed by address from low to high. That is,
for those with the same name after the suffix is removed, the one with
the smallest address is returned first. Therefore, when sorting in the
tool, if the raw names are the same, they should be sorted by address in
ascending order.
ASCII[.] = 2e
ASCII[0-9] = 30,39
ASCII[A-Z] = 41,5a
ASCII[_] = 5f
ASCII[a-z] = 61,7a
According to the preceding ASCII code values, the following sorting result
is strictly followed.
---------------------------------
| main-key | sub-key |
|---------------------------------|
| | addr_lowest |
| <name> | ... |
| <name>.<suffix> | ... |
| | addr_highest |
|---------------------------------|
| <name>?<others> | | //? is [_A-Za-z0-9]
---------------------------------
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Stable-dep-of: 8cc32a9bbf ("kallsyms: strip LTO-only suffixes from promoted global functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60443c88f3 ]
Currently, to search for a symbol, we need to expand the symbols in
'kallsyms_names' one by one, and then use the expanded string for
comparison. It's O(n).
If we sort names in ascending order like addresses, we can also use
binary search. It's O(log(n)).
In order not to change the implementation of "/proc/kallsyms", the table
kallsyms_names[] is still stored in a one-to-one correspondence with the
address in ascending order.
Add array kallsyms_seqs_of_names[], it's indexed by the sequence number
of the sorted names, and the corresponding content is the sequence number
of the sorted addresses. For example:
Assume that the index of NameX in array kallsyms_seqs_of_names[] is 'i',
the content of kallsyms_seqs_of_names[i] is 'k', then the corresponding
address of NameX is kallsyms_addresses[k]. The offset in kallsyms_names[]
is get_symbol_offset(k).
Note that the memory usage will increase by (4 * kallsyms_num_syms)
bytes, the next two patches will reduce (1 * kallsyms_num_syms) bytes
and properly handle the case CONFIG_LTO_CLANG=y.
Performance test results: (x86)
Before:
min=234, max=10364402, avg=5206926
min=267, max=11168517, avg=5207587
After:
min=1016, max=90894, avg=7272
min=1014, max=93470, avg=7293
The average lookup performance of kallsyms_lookup_name() improved 715x.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Stable-dep-of: 8cc32a9bbf ("kallsyms: strip LTO-only suffixes from promoted global functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e7de35eb7 ]
The mirror_num_ret is allowed to be NULL, although it has to be set when
smap is set. Unfortunately that is not a well enough specifiable
invariant for static type checkers, so add a NULL check to make sure they
are fine.
Fixes: 03793cbbc8 ("btrfs: add fast path for single device io in __btrfs_map_block")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1feece2780 ]
-L only specifies the search path for libraries directly provided in the
link line with -l. Because -lopencsd isn't specified, it's only linked
because it's a dependency of -lopencsd_c_api. Dependencies like this are
resolved using the default system search paths or -rpath-link=... rather
than -L. This means that compilation only works if OpenCSD is installed
to the system rather than provided with the CSLIBS (-L) option.
This could be fixed by adding -Wl,-rpath-link=$(CSLIBS) but that is less
conventional than just adding -lopencsd to the link line so that it uses
-L. -lopencsd seems to have been removed in commit ed17b19149
("perf tools: Drop requirement for libstdc++.so for libopencsd check")
because it was thought that there was a chance compilation would work
even if it didn't exist, but I think that only applies to libstdc++ so
there is no harm to add it back. libopencsd.so and libopencsd_c_api.so
would always exist together.
Testing
=======
The following scenarios now all work:
* Cross build with OpenCSD installed
* Cross build using CSLIBS=...
* Native build with OpenCSD installed
* Native build using CSLIBS=...
* Static cross build with OpenCSD installed
* Static cross build with CSLIBS=...
Committer testing:
⬢[acme@toolbox perf-tools]$ alias m
alias m='make -k BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools -C tools/perf install-bin && git status && perf test python ; perf record -o /dev/null sleep 0.01 ; perf stat --null sleep 0.01'
⬢[acme@toolbox perf-tools]$ ldd ~/bin/perf | grep csd
libopencsd_c_api.so.1 => /lib64/libopencsd_c_api.so.1 (0x00007fd49c44e000)
libopencsd.so.1 => /lib64/libopencsd.so.1 (0x00007fd49bd56000)
⬢[acme@toolbox perf-tools]$ cat /etc/redhat-release
Fedora release 36 (Thirty Six)
⬢[acme@toolbox perf-tools]$
Fixes: ed17b19149 ("perf tools: Drop requirement for libstdc++.so for libopencsd check")
Reported-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: coresight@lists.linaro.org
Closes: https://lore.kernel.org/linux-arm-kernel/56905d7a-a91e-883a-b707-9d5f686ba5f1@arm.com/
Link: https://lore.kernel.org/all/36cc4dc6-bf4b-1093-1c0a-876e368af183@kleine-koenig.org/
Link: https://lore.kernel.org/r/20230707154546.456720-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45fcc058a7 ]
Remove unnecessary release_mem_region from the error path to prevent
mem region from being released twice, which could avoid resource leak
or other unexpected issues.
Fixes: b083c22d51 ("video: fbdev: imxfb: Convert request_mem_region + ioremap to devm_ioremap_resource")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e47382fbc ]
Warn about invalid var->left_margin or var->right_margin. Their values
are read from the device tree.
We store var->left_margin-3 and var->right_margin-1 in register
fields. These fields should be >= 0.
Fixes: 7e8549bcee ("imxfb: Fix margin settings")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5158814cbb ]
The command word is defined as following:
/* Command */
#define SPI_CMD_COMMAND_SHIFT 0
#define SPI_CMD_DEVICE_ID_SHIFT 4
#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
#define SPI_CMD_ONE_BYTE_SHIFT 11
#define SPI_CMD_ONE_WIRE_SHIFT 12
If the prepend byte count field starts at bit 8, and the next defined
bit is SPI_CMD_ONE_BYTE at bit 11, it can be at most 3 bits wide, and
thus the max value is 7, not 15.
Fixes: b17de07606 ("spi/bcm63xx: work around inability to keep CS up")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/20230629071453.62024-1-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfc374a145 ]
Currently, sd1 and sd0 have unique subnode names 'sd1_mux' and 'sd0_mux'.
If we change these to non-unique subnode names such as 'mux' this can
lead to the below conflict as the RZ/G2L pin control driver considers
only the names of the subnodes.
pinctrl-rzg2l 11030000.pinctrl: pin P47_0 already requested by 11c00000.mmc; cannot claim for 11c10000.mmc
pinctrl-rzg2l 11030000.pinctrl: pin-376 (11c10000.mmc) status -22
pinctrl-rzg2l 11030000.pinctrl: could not request pin 376 (P47_0) from group mux on device pinctrl-rzg2l
renesas_sdhi_internal_dmac 11c10000.mmc: Error applying setting, reverse things back
Fix this by constructing unique names from the node names of both the
pin control configuration node and its child node, where appropriate.
Based on the work done by Geert for the RZ/V2M pinctrl driver.
Fixes: c4c4637eb5 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230704111858.215278-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f46a0b47cc ]
The eMMC and SDHI pin control configuration nodes in DT have subnodes
with the same names ("data" and "ctrl"). As the RZ/V2M pin control
driver considers only the names of the subnodes, this leads to
conflicts:
pinctrl-rzv2m b6250000.pinctrl: pin P8_2 already requested by 85000000.mmc; cannot claim for 85020000.mmc
pinctrl-rzv2m b6250000.pinctrl: pin-130 (85020000.mmc) status -22
renesas_sdhi_internal_dmac 85020000.mmc: Error applying setting, reverse things back
Fix this by constructing unique names from the node names of both the
pin control configuration node and its child node, where appropriate.
Reported by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Fixes: 92a9b82525 ("pinctrl: renesas: Add RZ/V2M pin and gpio controller driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/607bd6ab4905b0b1b119a06ef953fa1184505777.1688396717.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aff037078e ]
Destroying psi trigger in cgroup_file_release causes UAF issues when
a cgroup is removed from under a polling process. This is happening
because cgroup removal causes a call to cgroup_file_release while the
actual file is still alive. Destroying the trigger at this point would
also destroy its waitqueue head and if there is still a polling process
on that file accessing the waitqueue, it will step on the freed pointer:
do_select
vfs_poll
do_rmdir
cgroup_rmdir
kernfs_drain_open_files
cgroup_file_release
cgroup_pressure_release
psi_trigger_destroy
wake_up_pollfree(&t->event_wait)
// vfs_poll is unblocked
synchronize_rcu
kfree(t)
poll_freewait -> UAF access to the trigger's waitqueue head
Patch [1] fixed this issue for epoll() case using wake_up_pollfree(),
however the same issue exists for synchronous poll() case.
The root cause of this issue is that the lifecycles of the psi trigger's
waitqueue and of the file associated with the trigger are different. Fix
this by using kernfs_generic_poll function when polling on cgroup-specific
psi triggers. It internally uses kernfs_open_node->poll waitqueue head
with its lifecycle tied to the file's lifecycle. This also renders the
fix in [1] obsolete, so revert it.
[1] commit c2dbe32d5d ("sched/psi: Fix use-after-free in ep_remove_wait_queue()")
Fixes: 0e94682b73 ("psi: introduce psi monitor")
Closes: https://lore.kernel.org/all/20230613062306.101831-1-lujialin4@huawei.com/
Reported-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230630005612.1014540-1-surenb@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d82caa2735 ]
PSI offers 2 mechanisms to get information about a specific resource
pressure. One is reading from /proc/pressure/<resource>, which gives
average pressures aggregated every 2s. The other is creating a pollable
fd for a specific resource and cgroup.
The trigger creation requires CAP_SYS_RESOURCE, and gives the
possibility to pick specific time window and threshold, spawing an RT
thread to aggregate the data.
Systemd would like to provide containers the option to monitor pressure
on their own cgroup and sub-cgroups. For example, if systemd launches a
container that itself then launches services, the container should have
the ability to poll() for pressure in individual services. But neither
the container nor the services are privileged.
This patch implements a mechanism to allow unprivileged users to create
pressure triggers. The difference with privileged triggers creation is
that unprivileged ones must have a time window that's a multiple of 2s.
This is so that we can avoid unrestricted spawning of rt threads, and
use instead the same aggregation mechanism done for the averages, which
runs independently of any triggers.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20230330105418.77061-5-cerasuolodomenico@gmail.com
Stable-dep-of: aff037078e ("sched/psi: use kernfs polling functions for PSI trigger polling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4468fcae49 ]
This change moves update_total flag out of update_triggers function,
currently called only in psi_poll_work.
In the next patch, update_triggers will be called also in psi_avgs_work,
but the total update information is specific to psi_poll_work.
Returning update_total value to the caller let us avoid differentiating
the implementation of update_triggers for different aggregators.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20230330105418.77061-4-cerasuolodomenico@gmail.com
Stable-dep-of: aff037078e ("sched/psi: use kernfs polling functions for PSI trigger polling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fcd7bbae9 ]
Pavan reported a problem that PSI avgs_work idle shutoff is not
working at all. Because PSI_NONIDLE condition would be observed in
psi_avgs_work()->collect_percpu_times()->get_recent_times() even if
only the kworker running avgs_work on the CPU.
Although commit 1b69ac6b40 ("psi: fix aggregation idle shut-off")
avoided the ping-pong wake problem when the worker sleep, psi_avgs_work()
still will always re-arm the avgs_work, so shutoff is not working.
This patch changes to use PSI_STATE_RESCHEDULE to flag whether to
re-arm avgs_work in get_recent_times(). For the current CPU, we re-arm
avgs_work only when (NR_RUNNING > 1 || NR_IOWAIT > 0 || NR_MEMSTALL > 0),
for other CPUs we can just check PSI_NONIDLE delta. The new flag
is only used in psi_avgs_work(), so we check in get_recent_times()
that current_work() is avgs_work.
One potential problem is that the brief period of non-idle time
incurred between the aggregation run and the kworker's dequeue will
be stranded in the per-cpu buckets until avgs_work run next time.
The buckets can hold 4s worth of time, and future activity will wake
the avgs_work with a 2s delay, giving us 2s worth of data we can leave
behind when shut off the avgs_work. If the kworker run other works after
avgs_work shut off and doesn't have any scheduler activities for 2s,
this maybe a problem.
Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20221014110551.22695-1-zhouchengming@bytedance.com
Stable-dep-of: aff037078e ("sched/psi: use kernfs polling functions for PSI trigger polling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cf3d5567f ]
Now, strncpy() in hns3_dbg_fill_content() use src-length as copy-length,
it may result in dest-buf overflow.
This patch is to fix intel compile warning for csky-linux-gcc (GCC) 12.1.0
compiler.
The warning reports as below:
hclge_debugfs.c:92:25: warning: 'strncpy' specified bound depends on
the length of the source argument [-Wstringop-truncation]
strncpy(pos, items[i].name, strlen(items[i].name));
hclge_debugfs.c:90:25: warning: 'strncpy' output truncated before
terminating nul copying as many bytes from a string as its length
[-Wstringop-truncation]
strncpy(pos, result[i], strlen(result[i]));
strncpy() use src-length as copy-length, it may result in
dest-buf overflow.
So,this patch add some values check to avoid this issue.
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/lkml/202207170606.7WtHs9yS-lkp@intel.com/T/
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 004d25060c ]
In a setup where a Thunderbolt hub connects to Ethernet and a display
through USB Type-C, users may experience a hung task timeout when they
remove the cable between the PC and the Thunderbolt hub.
This is because the igb_down function is called multiple times when
the Thunderbolt hub is unplugged. For example, the igb_io_error_detected
triggers the first call, and the igb_remove triggers the second call.
The second call to igb_down will block at napi_synchronize.
Here's the call trace:
__schedule+0x3b0/0xddb
? __mod_timer+0x164/0x5d3
schedule+0x44/0xa8
schedule_timeout+0xb2/0x2a4
? run_local_timers+0x4e/0x4e
msleep+0x31/0x38
igb_down+0x12c/0x22a [igb 6615058754948bfde0bf01429257eb59f13030d4]
__igb_close+0x6f/0x9c [igb 6615058754948bfde0bf01429257eb59f13030d4]
igb_close+0x23/0x2b [igb 6615058754948bfde0bf01429257eb59f13030d4]
__dev_close_many+0x95/0xec
dev_close_many+0x6e/0x103
unregister_netdevice_many+0x105/0x5b1
unregister_netdevice_queue+0xc2/0x10d
unregister_netdev+0x1c/0x23
igb_remove+0xa7/0x11c [igb 6615058754948bfde0bf01429257eb59f13030d4]
pci_device_remove+0x3f/0x9c
device_release_driver_internal+0xfe/0x1b4
pci_stop_bus_device+0x5b/0x7f
pci_stop_bus_device+0x30/0x7f
pci_stop_bus_device+0x30/0x7f
pci_stop_and_remove_bus_device+0x12/0x19
pciehp_unconfigure_device+0x76/0xe9
pciehp_disable_slot+0x6e/0x131
pciehp_handle_presence_or_link_change+0x7a/0x3f7
pciehp_ist+0xbe/0x194
irq_thread_fn+0x22/0x4d
? irq_thread+0x1fd/0x1fd
irq_thread+0x17b/0x1fd
? irq_forced_thread_fn+0x5f/0x5f
kthread+0x142/0x153
? __irq_get_irqchip_state+0x46/0x46
? kthread_associate_blkcg+0x71/0x71
ret_from_fork+0x1f/0x30
In this case, igb_io_error_detected detaches the network interface
and requests a PCIE slot reset, however, the PCIE reset callback is
not being invoked and thus the Ethernet connection breaks down.
As the PCIE error in this case is a non-fatal one, requesting a
slot reset can be avoided.
This patch fixes the task hung issue and preserves Ethernet
connection by ignoring non-fatal PCIE errors.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230620174732.4145155-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a528ab1da ]
Roee reported various hard-to-debug crashes with pings in
EHT aggregation scenarios. Enabling KASAN showed that we
access the BAID allocation out of bounds, and looking at
the code a bit shows that since the reorder buffer entry
(struct iwl_mvm_reorder_buf_entry) is 128 bytes if debug
such as lockdep is enabled, then staring from an agg size
512 we overflow the size calculation, and allocate a much
smaller structure than we should, causing slab corruption
once we initialize this.
Fix this by simply using u32 instead of u16.
Reported-by: Roee Goldfiner <roee.h.goldfiner@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.f428c856030d.I2c2bb808e945adb71bc15f5b2bac2d8957ea90eb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71e7552c90 ]
-Wstringop-overflow is legitimately warning us about extra_size
pontentially being zero at some point, hence potenially ending
up _allocating_ zero bytes of memory for extra pointer and then
trying to access such object in a call to copy_from_user().
Fix this by adding a sanity check to ensure we never end up
trying to allocate zero bytes of data for extra pointer, before
continue executing the rest of the code in the function.
Address the following -Wstringop-overflow warning seen when built
m68k architecture with allyesconfig configuration:
from net/wireless/wext-core.c:11:
In function '_copy_from_user',
inlined from 'copy_from_user' at include/linux/uaccess.h:183:7,
inlined from 'ioctl_standard_iw_point' at net/wireless/wext-core.c:825:7:
arch/m68k/include/asm/string.h:48:25: warning: '__builtin_memset' writing 1 or more bytes into a region of size 0 overflows the destination [-Wstringop-overflow=]
48 | #define memset(d, c, n) __builtin_memset(d, c, n)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/uaccess.h:153:17: note: in expansion of macro 'memset'
153 | memset(to + (n - res), 0, res);
| ^~~~~~
In function 'kmalloc',
inlined from 'kzalloc' at include/linux/slab.h:694:9,
inlined from 'ioctl_standard_iw_point' at net/wireless/wext-core.c:819:10:
include/linux/slab.h:577:16: note: at offset 1 into destination object of size 0 allocated by '__kmalloc'
577 | return __kmalloc(size, flags);
| ^~~~~~~~~~~~~~~~~~~~~~
This help with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/315
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZItSlzvIpjdjNfd8@work
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
